What dns role when connecting to a wds Server

Similar Questions

• What to do when a PDC to Windows Server 2003 fails

  What to do when a PDC to Windows Server 2003 fails,

  We have already installed additional domain controllers to replicate with the PDC, but after that the Principal domain controller only not the system slows down and you get it working again. What is the fastest way to recover all the information that was in the CDP. Is there a way to retrieve all the information stored in the PDC without having to reinstall everything again.

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  Repost nicely in the Community Server above.

  See you soon.

  Mick Murphy - Microsoft partner

• Outlook express crashes when connecting with the mail server

  Outlook express 6 crashes when the connection with the mail server, please advise, thank you!

  Try to remove your e-mail account and then close and reopen OE and then add it back again.  Make sure that antivirus sofware interfering not - see www.oehelp.com/OETips.aspx#3

  Steve

• Error with Sync - "Sync has encountered an error when connecting. Incorrectly configured server.

  I'm running firefox 4.0 and used Sync successfully for a few weeks. I have not changed anything - no upgrade, etc.. Ideas, people?

  It is not uncommon to receive this error message. Happens to me all the time, but eventually it will synchronize successfully. He never synchronize successfully for you. If this isn't the case, then there is a real problem.

• Client Windows 7 Professional DNS fails to resolve the name - when connectin to a Windows Server 2003

  A professional Windows 7 workstation is unable to resolve the name when connecting to a Windows Server 2003 server.

  I ran the Portqry tool and discovered a problem with the Port 53 and open this Port in the Windows Firewall on the client and Windows Server 2003.  However, it may not always resolve the name and I can't get the Windows 7 workstation to join the domain.

  Our DNS server is at the ISP, but enabled DNS on Windows Server 2003.  I can ping the IP address of the server from the Windows 7 client

  nslookup is solved using the FULL domain name.

  Any ideas on other settings, I need change and port that I need to open to allow?

  Thank you.

  To help with this problem, please go to the TechNet Windows Server forums .  They can help you better than we can in the Windows Vista forum. Boulder computer Maven
  Most Microsoft Valuable Professional

• Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please. I have

  Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.

  Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support

• What to do when printer without wire connection is off

  What to do when printer wireless connection is off?

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Showcase Custom - what to do when no network connection?

  If everyone is familiar with the creation of windows custom for DPS applications I would be grateful for advice on what to do when the application is started, but no network connection is available? We used this guide as a starting point - HTML implementation of the library by default DPS | Adobe Developer Connection. This approach involves a large part of the logic of Javascript on the web hosting. One consequence of this is that if no connection is available the application will not work. Is it possible to include key in the application, such as the storefront based UI and features all downloaded folios are available even in offline mode?

  Thank you

  
  Toby

  Your store can be used offline, but you must make sure your remote URL no referencing for what anyone, including images, css and javascript.  Use the DPS configurator to create a custom store, and you can reference it for example:

  DPS Configurator

  You can use localstorage as well, but keep in mind something in the local storage is data transitional and iOS can wipe any time he wants to free storage on a device.  This only happens usually when there is little space storage remaining on a device, then, it is probably not all that common.

• What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  Francine simply connect to the internet periodically to receive updates and validate your membership.  If you have an annual membership, you can be disconnected until 99 days.  You can find more details in the help of Activation & deactivation.

  I also recommend to review CC help | Install, update, or uninstall applications which deals with the installation of setting language.

• I can't see the list of available wireless even when connected to wireless internet connections.

  I can't see the list of available wireless connections. So I can't connect to new wireless connections as I have not logged in before. The icon in the taskbar that would show you the possible connections disappeared. Nothing shows under connections network under Favorites network even when I'm logged in. I can pick up internet connections from earlier I can't see that one that is connected to or control it. Help, please. Thank you.

  Hi CorneliusE,

  1. what service pack is installed on the computer?

  2. what exactly happens when you try to view wireless networks? You receive error message nay?

  3. do you have security software installed on the computer?

  4 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article and check if that helps you find the wireless network.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  Note: Article applies to Windows XP SP 2, however, can also be tried with other versions of Windows XP as well.

  Method 2: If the method above is not enough, you can consult the following articles and check.

  How to configure TCP/IP to use DNS in Windows XP

  http://support.Microsoft.com/kb/305553

   

  To test TCP/IP connections by using the ping and the commands net view

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

   

  Let us know if that helps.

• WRT54GC failed to get a valid gateway entry when connecting through PPPoE

  Hi Experts,

  I'm moving my WRT54G Router that uses more than 5 years for a WRT54GC I got from my friend. I have clone each entry of the WRT54G to the new MAC address of one, even. Here's what I captured of the old WRT54G Router when it connected via PPPoE

  Connection type: PPPoE
  Connection status: connected
  IP address: 114.91.200.128
  Subnet mask: 255.255.255.255
  Default gateway: 124.74.12.242
  DNS 1: 180.168.255.118
  DNS 2: 116.228.111.18
  DNS 3:
  MTU: 1492

  from the web administration interface, I can ping and traceroute yahoo.com, so can I browse any website from my PC.

  and here is what I have captured new WRT54GC router when connected via PPPoE

  Connection type: PPPoE
  IP address: 180.158.83.182
  Subnet mask: 255.255.0.0
  Default gateway:
  DNS1: 180.168.255.118
  DNS2: 116.228.111.18

  the web administration interface, I can ping and traceroute yahoo.com, but I can not browse any website from my PC.

  Could you get it someone please let me know if there is something I misconfigured?

  Thank you

  Probably your ISP don't like it if you try to connect two times with the same account of different devices.

  I suggest you press the disconnect on the WRT54G to close the PPPoE session before trying it on the new.

  Or stopping for the night and try the new router first thing in the morning...

• Sat T135D: error message 'the user name or password is incorrect' when connecting

  Hello!

  I bought a PC laptop Toshiba T 135 d, and after a few days, I worked with it, I changed something in the users account and now it gives me this error "the user name or password is incorrect" when connecting. I mention that I have not introduced any password before.

  Can you help me?

  > I changed something in the users account
  And how to help? Who knows what you did there.

  I can tell you that it's really bad situation now. Without correct password, you will not be able to start the new installation of the operating system using the HDD recovery procedure.

• What to do when your Apple TV movie rental stops at Midway?

  We rented a movie last night and about 13 minutes, it was freezing everything simply.  We waited a long time and finally gave up and watched something that the Apple TV would actually deliver. We went back tonight to try to watch the rest of the film, but here we are, about half way through, and it stops again. We were 'suspended' for about 12 minutes now and nothing do us seems to help. If we try to get out, told us our rental period is up, so basically if we the film release, we will have to pay for another rental observe this rest.  And, how many times do you think we will have to go through this to come at the end of 2 hours, 8 minutes movie?  That is what it is?  What should do?    Thank you.

  It could be a network problem

  What is your current connection via speedtest.net

  Make sure that DNS is set to automatic (network - general - settings)

  If during testing of wifi Ethernet

  Test on another network

• When connecting on MacMini, password is auto-complete with a myriad of points and is not the right password

  When connecting on MacMini after I click on the user, the password field is auto-complete with a myriad of points and is not the right password.

  There suddenly / maybe after the most recent update 2015-008, which I installed it on 8 January 2016.

  I need to delete points, usually I can remove them by double clicking on it and pressing the delete key, but they will not simply remove by clicking in the field and using the delete key, as would be normal. Sometimes it takes a few tries to remove the points, and then I can connect.

  Does my keyboard or a virus, my usb port, the update of security or something else...?

  I use this computer without problem for a few years.

  Thank you, Kathy

  osX version 10.9.5 processor 2.3 GHz intel core 17

  First try another KB

  Next

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• What is the fastest connection that I can use for a new external SSD for my MBP late 2008?

  That IS the question. I want a new external SSD for my MBP late 2008.

  What is the fastest connection type that works?

  'External' and 'SSD' could be a problem.  SSDS are different animals of disks spinny.  Some will say that you need not trim on SSD (TRIM is a management tool to move only the ' opportunity' bytes in a block when the block of data is moved), but definitely TRIM does not work on USB or Firewire.  Not sure if the TRIM works on Thunderbolt connected readers as it does on disks SATA-path, however.

  Speed included between slower and faster, however: USB 2.0, Firewire 400, Firewire 800, USB 3.0, love at first sight.