What do I have to remove the battery from my PC when I connect it with the cable?

Similar Questions

• Satellite R830-143 - what screwdriver I have to remove the cover of the RAM?

  Hello

  My manual says I need a "point size phillips screwdriver 0" to access the RAM and HD.

  I bought one off amazon and the screws are much too small for the screwdriver. I also bought a box of 11 precision screwdrivers, and none of them match.

  What screwdriver do I need?

  Thank you

  I n t have this model laptop but it is not so complicated to identify which screw is used.
  Compare with respect to types and use the screwdriver to the right.

  It cannot be so problematic.

• I can't open the system when he was sht down. But the system was the heat and I have to remove the battery for a while and it should re-sttart, what the problem.

  I can't open the system when he was sht down. But the system was the heat and I have to remove the battery for a while and it should re-sttart, what the problem.

  Too generic a question, can you clarify considerably more for us? Your question could be reformulated in the following way and always be true?

  "I can't start my computer once he has had a BSOD. Something overheated, but I don't know. I removed the CMOS battery and replaced in order to asure me that a bad overclock on a core component has not caused the problem. Now, it restarts correctly, what is / was the problem? »
  The foregoing, what I thought you meant. The above statement is correct?

• Dell Latitude E6400 does not start pressing the power instead button, I have to remove the battery.

  Original title: problem starting Latitude E6400 lappie

  Hi all

  When I start my dell latitude6400 is not start pressing the power instead button I have to remove the battery to the rear and place it again, and then the lappie starts... someone can help to...
  Thank you

  Hello

  1. what happens when you start the laptop, you receive no error message?

  2 have you made any changes to the computer before the show?

  I suggest to remove the battery and connect the laptop to AC power and then try to start the computer to see if the problem is with the battery.

  I suggest you to contact Dell support on the issue, as this can be a hardware problem.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=DHS&CS=19

• I have to remove the duplicate files, but having problems by selecting more than one file in the player at the time.

  I have to remove the duplicate files, but having problems by selecting more than one file in the player at the time. How can I select multiple files at the same time so I can just delete them. I used to be able to do this in previous versions of Media Player, but this function seems now blocked or unavailable. The problem is this: through previous use of media player, it plays all my multimedia files several times whenever a device support has been added. He would try to save the files on my main drive, but since there is not enough room this would save the files somewhere else. This happened several times, I suppose, because when I upgraded my computer and a media scan was conducted he found duplicates of all my media various times of at least 6-8. I've consolidated since my plates on 3-disc multi to, but have now records duplicated hundreds and thousands of duplicate media files. Previous versions of Media Player would allow me to select all files and then delete them both of the reader, but also from my hard drive. So now I'm stuck with more than 300 GB of duplicate media I have to search line by line through all my hard drives to find each duplicate both, unless I can get media player to do what it can. Any help in this area would be appreciated.

  Hello

  1. did you of recent changes on the computer?

  2. is Windows media player files in double creation during playback of music files?

  To delete duplicate entries, click on another feature tab in the drive (for example the current playback), and then click library.
  
  If this does not remove duplicates from your library, you can use the Add to library dialog box to search computer to analyze a file on your computer the duplicate entries not valid-pointing. The player will remove invalid entries in your library that point to files that no longer exist in the folder.

  Complete the steps above for files that are stored in the hard disks.

  Method 1: Use the add to Library dialog box search for computers

  (a) start Windows Media Player.
  
  (b) press F3 on your keyboard to open Add to the library of the find computers dialog box.

  (c) click the Browse button to locate the folder on your computer so that your library contains invalid entries. Specify the location of the folder in the box look in.

  If you are not sure what duplicate in your library entry is not valid, you can add a path column to display in your library. Specify the folder on your computer that corresponds to the path not valid file displayed in your library.
  
  (d) click on the Search button.

  The player will search for digital media files and playlists in the folder that you specify and remove invalid entries in your library that point to files that no longer exist in the folder. If not valid in double entries point to other folders on your computer, repeat this procedure, specify a different folder every time.

  If only a small number of duplicate entries exist, you can delete those invalid manually by right-clicking on the invalid entry, and then clicking Delete .
  
  For large double-number of entries in your library (or if all your library is duplicated), it might be better to create a new library and delete the files.

  Method 2:

  After you remove the duplicate entries, run the troubleshooting of Windows Media Library settings to solve this problem.

  Open the troubleshooter in Windows Media Library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Let us know the results.

  I hope this helps.

• Removing duplicates, I usually have to remove the song duplicate twice to make it disappear. Why?

  When you remove duplicate songs, I usually have to remove the song duplicate twice to make it disappear. Why?

  When I delete the duplicate song it pops up again. When I erase it a second time he remains missing.   After the first removal, he reappeared with a little cloud in an arrow down. Once I have remove that she remains missing.

  Is it possible that I can delete a song in one operation?

  iTunes 12.3.3 on Mac Pro Tower

  Looks like you have an iCloud music library, Subscribe to Match iTunes Apple music (or both).  The first time, you probably delete the local copy of the song file (stored on the storage of your computer).  But the song still in your iCloud library, so it appears in your list of music library with the cloud with the arrow symbol (which you can click to download it again).  You can still play the song streaming from iCloud.  The second time, you delete the song completely within your music to iCloud library.

  You can see the distinction if you right click on a song (which is stored locally) in iTunes.  On the shortcut menu that appears, there are two separate, Remove Download and deletecommands.  Remove Download removes the local copy of the song file, but keeps the song in your music to iCloud library.  Delete deletes the song completely, with a single action.

• I forgot my password.so administrator how to have to remove the password

  I forgot my password.so administrator how to have to remove the password

  I forgot my password.so administrator how to have to remove the password

  Here are the usual methods to solve this problem:

  • Restart the computer with your CD to repair Windows, then use system restore to set Windows in a few days (only works if the problem occurred recently).
  • Logging in as a different admin account and then reset the password for your existing account (works only if create you an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (works only if you have activated the account administrator and know its password).
  • Insert your flash drive USB with the password key file (only works if you have created such a keyfile).

• What should I do to remove the user name of the saved list when I connect

  What should I do to remove the user name of the saved list when I connect

  I think maybe he's talking about the list that is displayed when you connect to a web mail service. It shows several previous usernames used. How to remove one of them from the list?

• What can I do to remove the old email address and get a new one for my Microsoft account?

  Original title: problem with my phone

  What can I do to remove the old email address and get a new one for my Microsoft account

  What is the model of your phone?

  Normally you could not remove the default email but you can add a new account setting and if it is not the default, you could delete it in the account setting.

• iPhone 6 s is not wake up when you remove the cable from the charger.

  Hi all.

  I noticed that sometimes my iPhone didn't wake not (the lock screen display) when the charging cable is removed. the charger / sync port seem otherwise works normally.

  Is this normal?  I'm guessing that this happens because sometimes when the battery is fully charged, no power goes to the phone and if you pull the cable then, the phone can't tell you have removed the cable, but I have not seen this happen on my previous phones.

  Thank you!

  Yes, this sounds like normal behavior! On my iPhone 6, when it reached 100% of their capacity and is completely loaded, as it stops in charge, which is why when you unplug the iPhone from the charger the screen does not automatically wake up, because the charger stopped output power to the iPhone when it finished filling. I hope that answers your question!

• Windows System 32 does not locate khatra.exe is move every time when I start my laptop that I have to remove khatra.exe from my laptop

  Windows System 32 does not locate khatra.exe is move every time when I start my laptop that I have to remove khatra.exe from my laptop

  Hello

  Information KHATRA.exe
  http://www.bleepingcomputer.com/startups/not_used-24897.html
  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Smartphones from blackBerry 7100 G white screen and I have to remove the battery, reinstall it.

  I'll be in the middle of typing, and then the screen turns white!. I have to take the battery out, put again and then I can get 5 more uses out of it and it white screens again. Sometimes I just need to make works with the black button on the top and it starts working again. What is the problem with my Blackberry? My company does not allow me to replace it because they are cheap. Any suggestions in addition to finding a new job? Boring it is slightly

  I found and installed the last o/s. MY Blackberrry still "white screens" randomly and I need either press the black button on the top several times or remove the battery and reset back to normal. New to the forum and made a typo

• Do I have to remove the last batch of data before the next batch of POST import?

  Hi all

  I am coding an integration with the API bulk import Contacts in Eloqua.

  Due to more than 32 MB capacity, I have to divide the data into several lots. So, I POST a Contacts import and PUBLISH data from Batch_1 import.

  After the Batch_1 data synchronization was successful, I would point OUT Batch_2 and synchronize it.

  Here's my question: what will happen to Batch_1? Is it to sync again? What I have to remove it before display Batch_2?

  Thank you

  Biao

  No, you don't need to REMOVE the resource export or sync associated with the first series before starting the second.

  The flow would be:

  1. Create import #1
  2. Create import SEO sync #1 #1
  3. Start to run the synchronization #1
  4. When you are finished, check the status of synchronization #1
  5. Create import #2
  6. Create import SEO sync #2 #2
  7. Start to run the synchronization #2
  8. When you are finished, check the status of synchronization #2

  And so on.

• I have to remove the previous software from HP?

  I currently have a Photosmart 2610xi installed on my Windows XP computer. I bought a new Photosmart C6380 which I want to use instead. Do I have to remove all previous HP (ImageZone, Director, drivers, etc) software before the new installation or new software just "will focus on" what is already in my system. Thank you.

  Yes, you need to first uninstall the old software of your old printer before installing the new. Make sure that you unplug the old printer from the computer before you uninstall the software.

• ESXi USB, what happens if you then remove the USB boot?

  Hello

  Someone in our team IT wants to use ESXi 5 bootable, i.e. start an ESXi host for a 2 GB USB flash drive in order to save the cost of buying the hard drives local to a RAID set.

  I know there are a few downsides to this, but one thing I wanted to know more precisely, it is what happens to the ESXi if you remove the USB or the USB drive goes down, while the host is running. The army continues to operate, as it will be charged the ESXi image in memory? Or it will fail if it cannot see the USB as it initialized from?

  Thank you!

  ESXi will work on - running some virtual machines are not affected.

  Usually, there should be no problem to plug new - but I have seen cases where the system does not start after a rough unplug - so avoid it.