What does 0/Rx/activate RF and RF TX/0/Enable mean?

Similar Questions

• What does error Code 0x80072efd HRESULT and how to fix it?

  What does error Code 0x80072efd HRESULT and how to fix it?

  If this error occurs during the update of Windows, see here: http://support.microsoft.com/kb/836941. (0X80072EFD - ERROR_INTERNET_CANNOT_CONNECT). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• What does "cannot write: c: / program files/dell support center/imstrayicon" means and how can I solve the problem

  What does "cannot write: c: / program files/dell support central/imstrayicon" mean and how do I remove the note from my screen or solve the problem

  Hi Thomas,

  1. when exactly you get this message?

  2. this happens to you on starup windows or when you try to use a specific program?

  3. did you of recent changes on the computer?

  This seems to be an error related to the centre of Dell Support.

  Step 1:

  If you receive at the start, then you can try to disable any support Dell Center entries in startup items and see if it helps.

  a. Click Start, type msconfig.exe in the start search, and then press ENTER.

  b. click on the Startup tab and uncheck then the program in the list.

  Hope this information is useful.

• What does 'insufficient media. This transition will contain repeated images"means?

  Premiere Pro CS5.5.2. Windows 7 Pro.

  What does 'insufficient media. This transition will contain repeated images"means?

  Duration of image A 00.00, 08:48

  Duration of image B 00.00, 31: 00

  Duration of transition 00.00, 00:30

  At maximum zoom, there is no difference between the two clips to 00. 33; 44; 44 in the timeline panel. Transition window info appears on any video transition that I use.

  Duration of the film is currently 01; 09; 39 38

  D0NNN wrote:

  What I don't understand?

  Handles the item and transitions

  https://helpx.Adobe.com/Premiere-Pro/using/transition-overview-applying-transitions.html#c lip_handles_and_transitions

• What does the red exclamation point and which would prompt me to now have more free disk space?

  It was getting my full disk space. Up to 1.2 GB to 73 GB. I removed some unnecessary files and programs up to 4.6 GB. Last night my internet was running very slow and I got a message that says that my disk space is full. I went to the Explorer, who intends to seek more to remove offline. To my surprise, it showed that I have 38 GB of free space. At the same time however, some (not all) of my desktop icons now have a red exclamation mark on them. There are some that are shortcuts, jpg files and doc files. That means the red exclamation that tempt me to now have more free disk space?

  I would just be guessing really. He could have files, online backup was queued up. It may be something to do with the shadow copy of Volume. If I use cleaning disc with the option all users and delete restore Points and shadow copies on the tab "More options", I'll be back about 15 GB on a disc of similar size. The effect is only temporary, until they accumulate again.

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

• What does "unable to load the filter AE, LBDC Gaussian blur" means?

  I opened an old video composed of a number of nested 1-7 years on CS5 videos. Everytime I open it I get a warning that it cannot load a filter ' AE, LBDC Gaussian blur. A few seeds of clips having Gaussian blur in them (even if it's hard to say because the blur is very low in these clips), other older do not have. I added the 'new' Gaussian blur to the clip that seemed to miss it, but the remains of warning when opening the file. What does that mean? Also, is there a quick way to repair old files with Gaussian blur?

  This is one of the reasons why it is generally suggested to complete your projects in the version that you started with and ongoing projects not upgrade to a new version. Now, you need to find the manually each instance of the blur effect and replace it with a new blur effect. It's your choice.

• Re: NB100-12N - what I need to activate sleep and Charge USB in the BIOS

  Hello

  What I have to go into the BIOS in order to activate this function or it is activated automatically?

  In the case where to enter BIOS why this was resolved in this way?

  Could not simply be available other hassle?

  I really put t know what problems you have with the NB100 and why it of so difficult for you to check if the BIOS contains the USB load option and sleep.

  To my knowledge, the NB100 supports 3 USB ports with Sleep and Charge function.
  But if you want to know if it s on or off then press F2 immediately after that the laptop was turned on to get access to the BIOS Setup.

  Enjoy your little NB100

• What does "a parity error was detected on \Device\ide\idePort0" mean and how can I fix?

  I have a Pentium 4, XP SP3, 2 HDs installed, and I don't think I have SCSI but in my registry, it shows the HDs and two CD - RW and DVD drives listed under SCSI and there is no topic such as IDE, Atapi or AT (the area I'm talking about in the registry is: \HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\) so I don't know what is happening in this area...? Anyway, everything else refers to above devices IDE or Atapi etc..

  As well as the above parity error, I noticed a little more that I will add here:

  "The driver has detected an error on \Device\Harddisk0\D controller" (this is an ALL NEW HD)

  "The device, \Device\Harddisk1\D, has a bad block" (it's second HD giving the same error msg, the last HD failed and this is used)

  "The device, \Device\CdRom0, has a bad block" (this is my CD - RW drive, which seems to work very well, it's the DVD player that is not working properly)

  "While validating this \Device\Serial0 was really a serial port, a fifo was detected. The fifo will be used. »

  All of these errors are coming together for the most part. Please help as I just replaced a hard drive failing during the summer, now it is looking like another is a failure, but I want to know if something else in my computer can cause drives to fail, or causing errors in some way, or any other information anyone can give me to help before you start the process of replacing a HD failure (again!)

  Thank you... Denise

  Hi groovydee,

  Method 1

  I suggest you reinstall the controller and chipset drivers by contacting the manufacturer of the computer, check to see if it helps.

  Method 2

  If the previous step fails, then you need to check disk scan on the hard drive to scan and difficulty of bad sectors on the disk.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: While running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this area if all the data available in this area may be lost.

• What does "HTTP 400 error. The request is malformed. "mean?

  Typed a web address and get above message. Another Member of the family using Firefox but does not get this error when you enter the same address. Tried to restart with disabled modules, but did not.

  Cleared the cache and it fixed.

• What does Windows 7 Professional (64-bit Windows 8 license, media) means?

  Hi, im thinking get an optiplex 3020 and OS this description is listed, but im not sure exactly what it means.

  Is this to say that the system is delivered with win 7 AND win 8?

  Is this a real DVD that I can use to reinstall the OS, if I need to reformat?

  Thank you

  Hi JohnRitter,

  This means that you can order it with Windows 7 Professional or Windows 8 Professional.

  You would be able to call technical support for the operating system DVD.

• What does the error message mean? TypeError: Error #1010: a term is undefined and has no properties.

  Please can you tell me what does the following error code and what should I do to fix it.

  TypeError: Error #1010: a term is undefined and has no properties.

  Thank you very much

  Hello

  • When you get this error?
  • How long you have been facing this problem?
  • What were the changes made before the problem occurred?

  Reply back with more information, helping us to better understand the issue.

  See also:

  http://support.Microsoft.com/kb/555375

• When you try to install my new Embird program I get the message "this link must be opened with an application, select application. What does that mean?

  Help, I hope that I've not messed up, too bad!

  Help, I have a small embroidery business and have used a program called Embird.  Yesterday, I downloaded an upgrade for this program. It said to uninstall the old program before installing the new, so I did.  Now when I try to install the new one it says this link must be opened with an application, select application.  I have no idea what it means that someone can help me?  I tried to restore the computer to a date prior to just start all over hoping he would restore the old Embird, it says that the file may be damaged and will not work.

  If you were able to 'merge', you have unzipped the file somehow.  What was all the messages when you did the merger?

  Follow these steps:

  1 information about the particular file in question

  Right-click on the downloaded file, and select Properties.  What does say for 'File Type' and what is the 3-letter file extension (after the point)?

  If there is no file extension, find the file using Windows Explorer, and then click Tools > Folder Options > view.  Uncheck "Hide extensions for known file types" and click OK.  Now, look at the file again for the file extension.

  2. test of exe files

  Click Start > run, then type notepad in the "open" box, then click OK
  Didn't open a Notepad window?  If not, what error message do you have?

  Click Start > run, and then type the following in the "Open" box and click OK
  %SystemRoot%\system32\
  Find notepad.exe (or just Notepad if file extensions are not displayed), and then double-click it.  What is going on?

• What does the green dot of the battery?

  What does the green dot of the battery?

  This means that the player has Rhapsody tracks on it, and the status of the subscription is currently correct. You will need to connect to your PC at least once every 30 days to keep the validated tracks.

• What does FMCopyApplication.exe do?

  Hi all..

  What does FMCopyApplication.exe do? and how its diff of LCM.

  FMCopyApplication.exe below are the uses for it.

  1. regular copy request HFM - for example monthly synchronization between the Production, development and test environments
  2. planning of copy of long process to bring them performed during the night
  3. create a batch file to copy several HFM applications in a sequence - useful for Migration (cannot be done in lcm)

  4 LCM also does the same thing but no one who is in love with command line will use FMCopyApplication.exe.

  Thank you

  ~ KKT ~.

• activate my membership and paid for it as well, but the creative cloud app shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been

  I activated my subscription and paid for it as well, but the creative application cloud shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been activated?...

  Kindly Contact customer and details of payment verified. [Make sure that you are connected to the Web site with the valid Adobe ID under which the product is licensed].