What does "Actionlist not found" mean?

Similar Questions

• 62/4MEM/40000000: 0X84321b98 what does this error message mean?

  62/4MEM/40000000: 0X84321b98 what does this error message mean?

  It of a memory error, what are you are having problems.

• AirPrint is not working since 9.3.1 what airprint update - not found.  tried the suggestion of JimHdk, who worked for a single document. any suggestions

  AirPrint is not working since 9.3.1 what airprint update - not found.  tried the suggestion of JimHdk, who worked for a single document. any suggestions

  Since we do not know what may have suggested to Jim, power cycle your router and the printer and force restart the iPad. Unplug the router and the printer power for 30 seconds. Plug in the router first and let it restart. And then reconnect the printer power supply. Then force restart the iPad. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• How can I fix error install Flash «actionlist» not found

  I use Firefox 5.0 that comes in 32 - bit, ran the software to uninstall current flash player, computer rebooted, checked that ActiveX is enabled and still get the message: SETUP ENCOUNTERED ACTIONLIST NOT FOUND ERROR when I try to install the latest version of Flash Player. Forums and other topics search help gave no information on actionlists relating to the installation of flash player. I'm at the end of my rope. Any help would be appreciated. Thank you!

  Just as one of them; EXE installers are generally smaller in size than the MSI installation programs.

• What does "Journal of user profile on not found" mean? I can't connect to my account

  I can't log on my user account.  the message says 'user profile on not found diary '.  What does that mean? and how to get back?

  Hello

  I suggest to start the computer in safe mode and check if you can connect:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Also check out this link:
  http://support.Microsoft.com/kb/947215/en-us

  Check if that helps.

• Windows Defender does not turn and I can't access it. I get the error Code is 0x800106ba. What does this error code mean?

  I can't turn on Windows Defender, nor can I open it upwards. The error code that is displayed is 0x8800106ba. What does this code mean?

  Hi, tonytiger34.

  The usual solution to this error is to make sure that the service is automatic. Oferror message when you run Windows Defender: 'Error 0x800106ba Code' :

  "To resolve this issue, follow these steps:

  1. Set the Windows Defender service on Automatic rather than Manual or disabled . To do this, follow these steps:
     1. Click Start
        The collapse of this image enlarge this image

        

        type services in the Start Search box, and then clickServices in the programs list.

        The collapse of this image enlarge this image

        

        If you are prompted for an administrator password or for confirmation, type your password or clickcontinue .

     2. Double-click the Windows Defender service and then in the Startup type box, clickAutomatic .
     3. Click OK . »

  If the automatic commissioning does not resolve the problem, try reinstalling Windows Defender.  Note, however, if you have installed Microsoft Security Essentials, Windows Defender disabled installation because MSE includes anti-spyware protection.

  Additional steps are available in the article referenced in the Knowledge Base.  Please let us know how make you out.

  Corrine, Microsoft MVP (consumer security)
  My Blog: Security garden

  This announcement is in my opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS and is provided without warranty and not an entitlement.

• Regarding the model updates, what means this error message 'not updated, point not found' mean?

  This is the second time I've posted this question so I hope someone will answer. In recent weeks, I found that I could apply is no longer a model in a group operation (returns the error above). If I change the model and save it shows all files associated with the update but does not actually update them and again returns the error 'not updated, point not found'. As a test, I created a copy of a .html special and enforced the associated model file. When I apply a change of model, it does correctly update the newly created file, but not the others. I also made a comparison of mechanical (by using windiff.exe) between the original file and duplicate file, and there is NO difference in both .html files. I also deleted and then recreated my cards site several times.

  As an aside, elements of library successfully.

  I use Dreamweaver CS6 on Windows 7.

  OK, here's an update. The three sites Web I was working on is gone live this weekend. As part of this activity, I created a new source folder in My Documents where I loaded the production version of the code. I created new DW sites for each and have begun changes in final production code which resulted in a number of model and the library updates the many pages on the sites. If you remember, the updated library mass worked fine but the update of the model is not. Well, I'm not sure what has changed other than the location of the source folder, but all works normally now. Go figure. I'm not complaining but just confused because I had been through this drill before.

  I guess there is no need of the cavalry. Thanks again for your help.

  Al

• What does "Currently being moderated" means?

  Hello

  Some of my answers show as below:

  What does that mean? Why is this happening now?

  

  See you soon

  AJ

  The OTN site forum has been locked in read only status the weekend last to allow site administrators to perform some maintenance tasks.   While they did, some parameters have been published of course.  What these changes have been, I have no idea, but one of the visible side effects is that when a message or a response includes a link to a URL outside the Oracle - a third-party link multiverse - the post is now put away for examination in a queue.  External links can be seen as a question of security of some people, and apparently that's what happened.

  No one will ever know what the real facts are until a site administrator chooses to respond to all inquiries on that.  The rest of us do not have access to the details.

  Please see the following discussion

  Has something changed with the publication since the last update?

  It is in the forum for feedback from the Community (where you should have posted this, instead of assigning to the JDeveloper space).

  This post of yours is currently not necessary and is off-topic for the JDeveloper space, so I'll be locking.

• Is it possible to find a list of what iTunes songs not found on my PC? I have a library of more than 4000 songs and do not want to have to try all of them.

  I found by trial and error that iTunes has lost track of some of my songs. I suspect that it might be more, but do not know how to find out other than by "trial and error".

  You can use one of the following methods to delete broken links.

  Lost & found playlists

  Create a playlist named found, select everything in the music and the drag in the playlist found . Create a smart playlist called Lost corresponding to all the rulesthat playlist is music and Playlist not found. Your lost tracks will be in this playlist. They can be deleted with Ctrl + A, and then shift + delete.

  Or use iTunes folder Watch and enable the option to check titles dead at startup.

  If the media files exist somewhere so I can help you to reconnect the media mentions.

  TT2

• What does the error message mean? TypeError: Error #1010: a term is undefined and has no properties.

  Please can you tell me what does the following error code and what should I do to fix it.

  TypeError: Error #1010: a term is undefined and has no properties.

  Thank you very much

  Hello

  • When you get this error?
  • How long you have been facing this problem?
  • What were the changes made before the problem occurred?

  Reply back with more information, helping us to better understand the issue.

  See also:

  http://support.Microsoft.com/kb/555375

• What does this error message mean?

  Hello

  I get this error message and can't find any reference on the Cisco site, anyone can shed any light please?

  HTTP 404 not found (/ CACHE/sdesktop/install/css/main.css)

  I have it on a 3015 CSD-running.

  Thank you

  Bryn

  The error may indicate a problem with the Windows Client computer. Have you tried from another PC?

• What does the message "error during loading, the specified module is not found means?

  The message I receive when I connect to my computer.

  (1) could not load or run C/Julia/App.Data/Local/Temp/Csrss.exe'Specifed in the registry.  Make sure that the file exists on your computer or remove the reference to it in the registry.

  (2) RunDLL - "error loading C:/users/Julia/AppData/Local/dsDEXPrt.dll - the specified module could not be found

  (3) then, I get the message asking me to buy a full version of Vista Internet Security 2012, and as a result, I was not able to set up the internet.

  What do you advise?

  Your computer is infected.  If you still have problems after following the instructions above, you can receive free help online to one of the following online forums that specialize in the removal of malware.

  Malware removal Forum
  Safer Networking Forum

  What is the Tech Forum

• What does "Could not complete your request because that Brendan is a fool"?

  I got this dialog box message "Could not complete your request because Brendan is a fool" when you try to load a png file. The only way I could open it was with GIMP!

  Anyone know what this means?

  I would have uploaded an image, but this feature does not work on Chrome/Mac.

  On a side note: I worked many years in the sector of software products and I am surprised that such a non-professional message could have in the product. This makes me think that the in-house development process is out of control. Not cool!

  See this page about Brendan's a fool:

  http://www.moonmac.com/Macking90.html

• What does error code 2149842966 mean?

  What is the meaning can you enlighten me and be more precise... Thank you

  This is the decimal equivalent of the hexadecimal error code 0 x 80240016.

  For Windows Update, it should disappear if you run WIndows Update again. If this is not the case, see:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80240016

  (should work for Vista)

• What does Fdisk-lu actually mean?

  People:

  I'm not a Linux guy, so forgive me for this question "junior."  When I 1st started with VMware I loaded ESX 3.5 and thought that the default partitions proposed by the GUI should be good enough. 1 year later, 2 guests ran fine without any problems, everything should be OK. Recently, I upgraded to ESX 4.0 via the Update Manager Vcenter, so always good. Of course along the way, I found many, many opinions on what "partition" best sizes should be for ESX. OK, I was able to understand some issues, as if the default location for the unannounced dumps core is full, he picks up the file system in the partition.

  Study for my VCP - 410 exam, there are many references to the size of 'minium' partition to install ESX4.0. My experience in the world of Windows "diskpart" was a subject that you didn't really want to play around. So today, I decided to 'see' what were the partitions on my server ESX4.0 (pasted below). Using fdisk-lu, df-h and vdf - h, I realized that "dev/cciss/c0d0px" partitions are on the system drive local (locally for this ESX host boots), which is a HP Smartarray RAID1 72 GB table on a server BL680. I can deal with that, I see 7 partitions, which I can understand the VMFS file would be based on the size of the partition.

  What I can't understand where is the/dev/sdax "disks/partitions" coming from? It seems that/dev/sda5 = / dev/cciss/c0d0p2 &/dev/sda2 = / dev/cciss/c0d0p7 (I assume that on the size of the partition). Can someone tell me what the "decoder" secret of ring, it's that I'm missing here? Is there a 'physical' of 'logic' device name mapping device that I need to understand?

  PS: Yes I'm not run cleanup ESX3.5 script (/ usr/sbin/cleanup-esx3) yet. Had only 5 days on ESX4.0.

  # fdisk - read

  Disk/dev/cciss/c0d0: 73.3 GB, 73372631040 bytes

  255 heads, 63 sectors/track, 8920 cylinders, total of 143305920 areas

  Units is 1 * 512 sectors is 512 bytes

  Device boot start end blocks Id system

  / dev/CCISS/c0d0p1 * 63 208844 104391 83 Linux 104 MB

  / dev/CCISS/c0d0p2 208845 10442249 5116702 + 83 Linux 5.1 GB

  / dev/CCISS/c0d0p3 10442250 137901959 63729855 fb VMware VMFS 63.7 GB

  / dev/CCISS/c0d0p4 137901960 143299799 2698920 f W95 Ext'd (LBA) 2.6 GB

  / dev/CCISS/c0d0p5 143091018 143299799 fc VMware VMKCORE 104 MB 104391

  / dev/CCISS/c0d0p6 137902086 139010444 554179 + 82 Linux swap / Solaris 554 MB

  / dev/CCISS/c0d0p7 139010508 143090954 2040223 + 83 Linux 2.0 GB

  Partition table entries are not in the order of disc

  Disk/dev/sda: 8459 MB, 8459911168 bytes

  255 heads, 63 sectors/track, cylinders of 1028, total 16523264 areas

  Units is 1 * 512 sectors is 512 bytes

  Device boot start end blocks Id system

  / dev/sda1 63 2184839 1092388 + 82 Linux swap / Solaris

  / dev/sda2 2184840 6281414 2048287 + 83 Linux

  / dev/sda3 6281415 16514819 5116702 + 5 extended

  / dev/sda5 6281478 16514819 5116671 83 Linux

  Size of filesystem used Avail use % mounted on

  / dev/sda5 4.9 G 1.7 G 3.0 G 37%.

  / dev/sda2 2.0 G 67 M 1.8 G 4% / var/log

  / dev/CCISS/c0d0p1 99 M 71 M 24 M 75% / Boot

  / dev/CCISS/c0d0p2 4.9 G 1.7 G 2.9 G 38% / esx3-installation

  / dev/CCISS/c0d0p1 99 M 71 M 24 M 75% / esx3-installation/boot

  / dev/CCISS/c0d0p7 2.0 G 900 M 962 M 49% / esx3-installation/var/log

  # vdf h

  Size of filesystem used Avail use % mounted on

  / dev/sda5 4.9 G 1.7 G 3.0 G 37%.

  / dev/sda2 2.0 G 68 M 1.8 G 4% / var/log

  / dev/CCISS/c0d0p1 99 M 71 M 24 M 75% / Boot

  / dev/CCISS/c0d0p2 4.9 G 1.7 G 2.9 G 38% / esx3-installation

  / dev/CCISS/c0d0p1 99 M 71 M 24 M 75% / esx3-installation/boot

  / dev/CCISS/c0d0p7 2.0 G 900 M 962 M 49% / esx3-installation/var/log

  / vmfs/68 0 68 0% / vmfs/material

  / vmfs/volumes/48189b1c-009bf40e - b 7, 75 - 001e0b921f54 60G 30 G 29G 50% vmfs/volumes / esx100:storage1

  / vmfs/volumes/481e4761-7ba08156-89f9-001e0b921f54 98G 44 G 53G 45% / vmfs/volumes/Raid 10 secondary

  [

  So you say to the COS ESX uses this VMDK 'reader' divided into partitions/dev/sda1/2/3/5, Yes?

  Right... are partintions of a single vmdk file.

  dev/cciss/c0/d0/p7, 2 = the 'old' partitions COS divides for ESX 3.5?

  You must read the point of editing... for example with the release of df:

  / dev/CCISS/c0d0p2 4.9 G 1.7 G 2.9 G 38% / esx3-installation

  / dev/CCISS/c0d0p1 99 M 71 M 24 M 75% / esx3-installation/boot

  / dev/CCISS/c0d0p7 2.0 G 900 M 962 M 49% / esx3-installation/var/log

  As you can see also/dev/cciss/c0d0p1 wore on old ESX installation

  / dev/CCISS/c0d0p5 = ESX 4.0 Kernal partition?

  Yes... to exit fdisk:

  / dev/CCISS/c0d0p5 143091018 143299799 fc VMware VMKCORE 104 MB 104391

  / dev/CCISS/c0d0p6 = swap for ESX Kernal?

  Yes... but is not used by ESX 4.0, it was former swap space

  / dev/CCISS/c0d0p1 = the boot partition?

  Yes... output of df:

  / dev/CCISS/c0d0p1 99 M 71 M 24 M 75% / Boot

  As you see it is as well the boot for ESX 3.5 and 4.0 partition... It is usual

  André