What does "PAGE_FAULT_IN_NON_PAGED_AREA" usually mean when associated with a BSOD?

The question is in the title:
That the following sentence usually means, when associated with a BSOD?
"Failure of Page in the nonpaged area".
Since the very little I know of free software, this would mean that a pointer memory was bad, it refers to a location memory wrong. Is it so?
Thanks in advance,
concerning

Advertisement

Hello

It was an accurate description of the BCCode: 50 error you encounter.

Get rid of the RAID will probably do the trick. Good plan. However why we try to solve
a problem on a computer you can is no longer trying to fix yourself?

BCCode: 1st 0x0000001E

Cause

It is a very common bug control. To interpret it, you must identify which exception has been generated.

Common exception codes include:

  • 0 X 80000002: STATUS_DATATYPE_MISALIGNMENT

    An unaligned data reference was encountered.

  • 0 X 80000003: STATUS_BREAKPOINT

    A breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0XC0000005: STATUS_ACCESS_VIOLATION

    A memory access violation has occurred. (Parameter 4, verification of bug is the address to which the driver attempted to access.)

For a complete list of exception codes, see the ntstatus.h file located in the directory Inc. of the Windows Driver Kit.

Solve the problem

If you do not have to debug this problem, you must use certain basic troubleshooting techniques. If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates. Try changing video cards. Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading.

If you plan to debug this problem, you find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

If the exception code 0 x 80000003 occurs, this indicates that a breakpoint coded hard or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure a kernel debugger is connected and the system is booted with the Switch/DEBUG .

In case of exception code 0 x 80000002, the trap frame will provide additional information.

If you don't know the specific cause of the exception, the following should be considered:

Hardware incompatibility. First of all, make sure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.

Service system or driver faulty device. In addition, a chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, the service may be removed by the system startup by using the Recovery Console and by removing the offending system service file.

Check the system log in Event Viewer for additional error messages that might help determine the device or driver responsible for control of bug 0x1E. Disable the cache in the BIOS memory could also resolve the error. You must also run hardware diagnostics, especially the scanner memory, provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is incompatibility of the system BIOS. BIOS problems can be solved by upgrading the version of the system BIOS.

Good luck.

Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • an error "file does not have a program associated with it for performing this action" when you click office and recent places.

    Original title:

    Win7 victory explrer click dsktop & mployment plces & get eror msg file is not a CDSA wth to prfrmin ths field prgrm. pls instl one prgrm so is alrdy instld Credit Union assc ltvds cntrl pnl prgrms

    I don't know how to fix. Help, please.    Win7 windows Explorer click

    Office & recent locations & grterror msg:
    This file does not have a program associated with it for performing this action. Please install a program or, if it is already installed. create an asssociationin the default programs control panel.
     
    Information given in the new thread:
    Error Msg When you try open office spaces & recent since the win Explorer

    when im in windows Explorer and click on the desktop or the recent places the link I get a msg of error and they will not open, but all others open. I posted pictures of error msg to skydrive yesterday.

    Hello

    Welcome to the Microsoft Community Forums.

    I see you've found an error "file does not have a program associated with it for performing this action" when you click office and recent places.

    1. Have you made changes on the computer before this problem?
    2. What is the full error message?

    I suggest you to report to us the screenshot of the Advanced window so that we can understand what exactly the situation.

    See:
    Use SkyDrive download collected files and post screen shot/image
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    The average while you can try the following steps and check if the error reappears.

    Method 1:

    Step 1:

    Start the computer in safe mode and check the number.

    Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

    Follow this link provided below to start your computer in safe mode.

    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    Step 2:

    Put the computer to boot and check if the problem persists.

    To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.

    Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

    It will be useful.

    Back with the details so that we can help you further. We also indicate the result of the suggested steps.

  • "this file does not have a program associated with it" message when you insert the sd card

    When I insert an SD card into my computer, I get a message that says f:\ that this file does not have a program associated with it... I know I can set default programs with the types of files in the Control Panel, but how do you recognize what to do when I insert an SD card in the computer?

    Windows 7
    The problem is caused by the automatic game changing options, this can sometimes happen when you install a new program, but they can easily be changed back. Click 'start' at the bottom left, go into "default programs" on the right side of the list (under computer / doc/images etc.) select "Change AutoPlay settings.
    You will find prob some of the sections had the new auto run program, just edit those you want (or all) "ask me every time", you will find that when you insert an sd card, you get the options normal download, copy, etc. as usual.

  • When I started > run > ncpa.cpl I get message error "file does not have a program associated with it... »

    XP SP3 with ALL critical & almost all critics not updated.

    I'm trying to follow the instructions in MS Article 871122 OTF Windows to configure my wireless network settings.

    But when I try to... Start > run > ncpa.cpl I get message error "file doesn't have a program associated with it".

    Thank you

    Steve

    HDTV - calibration.com

    Ok.  That's what steps 1 and 2 of the instructions in KB 871122.  You are now up to step 3.

    Now we will solve the problem "file does not have a program associated with it".  Go tohttp://www.dougknox.com/xp/file_assoc.htm .  Read the explanatory text and then click the 5th from the top:CPL file Association Fix download the zip file, extract the reg file, then run it.

    Because this association should not have broken, I suggest that you download, update and run

    Malwarebytes Anti-Malware and

    SuperAntiSpyware

  • What does Err1 and Err3 when you restart your PC with Windows Vista?

    What does Err1 and Err3 when you restart your PC with Windows Vista?

    Hi MichaelNessel,

    1. What is the full error message that you receive?

    2. don't you make changes on the computer before this problem?

    3. What is the brand and model of the computer?

    Please provide us with more information about the issue so that we can provide you with the necessary assistance.

  • This file does not have a program associated with trhw it for this action appears when I click on a file in 'my music '.

    Click Start

    Click on my music

    Click a floder

    Click on a song

    Bang I get = this file does not have a program associated with it for this action trhw. create an association in the Folder Options Control Panel

    ????????????????????????

    Click Start

    Click on my music

    Click a floder

    Click on a song

    Bang I get = this file does not have a program associated with it for this action trhw. create an association in the Folder Options Control Panel

    ????????????????????????

    =====================================================
    Have you tried to reset your file associations to include the format of the
    music in question file?

    Right-click on the file and choose... Properties / General tab / change button...
    In the menu... Select drive (highlighted) the media you want to use... so
    left click... OK / apply / OK.

  • Windows Mail: this file does not have a program associated with it

    I can receive and open the email, but when I click on anything in the email a box comes up which says "this file does not have a program associated with it for performing this action. Create an association in the set associations Control Panel. Don't know what to do. Any help would be great.

    Sorry, there just no option in this forum for the widows of mail... windows vista Home premium.

    [Original title: windows mail problem]

    ... when I click on anything in the email is a box that says "this file has no program associated with it for performing this action...".

    Everything is a bit wide.

    Assuming that you are talking about the first, (re-) represent Internet Explorer as default browser by clicking on the Start button then clicking default programs. Select set your default programs, and then Internet Explorer in the left page and click the Green Summit.

    To ensure that all users of the computer doesn't have the same problem, login Windows with an administrator account and return to the default programs page. This time, select set access and the computer program defaults.

    1. Select custom , and then click the chevrons pointing to extend the selection.
    2. Under choose a default browser, select Internet Explorer.
    3. For other browsers you use, select enable access to this program .
    4. Click OK, and then restart the computer.

    Now try to click a link in an e-mail. If it still does not work, please describe in detail what is happening, including the full text of the error message.

  • This file does not have a program associated with it for performing this action. Please install a program or, if such is already installed, create an association in the default programs control panel

    Hello-

    I'm looking for here (or get) help directed to the right forum regarding an error message I got when trying to open a PDF file.  The error message indicates "this file does not have a program associated with it for performing this action.  Please install a program or, if such is already installed, create an association in the default programs control panel. "To be quite honest, I don't have the slightest idea as to what to do with respect to this message and I need some advice ASAP.  I have the latest Adobe Acrobat Reader installed and if I have to contact them instead about my problem, please let me know.

    LeeBee

    Hi Leroy,

    I would like to know some information about the problem so that we can help you better.

    The question is specific to the PDF files?

    Thank you for details on the issue.

    I also know that the inconvenience that you are experiencing because of the problem mentioned. I will definitely help you.

    This problem may occur if the exact program is not associated with the file you are trying to open.

    I suggest you to set default programs and associate a file type with a program properly.

    Please see this link:
    Change programs that Windows 7 uses by default
    https://support.Microsoft.com/en-us/help/18539/Windows-7-change-default-programs

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • error message "this file does not have a program associated with it to perform this action." at the opening of the local drive E:

    Hey,.

    I have a problem and I can't understand it. This error message comes out when I opened only local disk E:

    I have 2 HDD on my computer... 130 and 250 GB of both of them I do 2 partion so there C: D: E: and F:

    C: is my windows data and 3 others my data. When I open my computer and then click on local disk E: error message comes out.

    the error message is "this file does not have a program associated with it for performing this action.". but local disk E: can open it using Explorer tree (left side of the windows Explorer) or windows Explorer.

    THX

    Hi, Flix_is_here,

    Download this file and unzip it and then double click on it and let it run, it will restore most all default files for XP associations

    http://social.technet.Microsoft.com/forums/en/itproxpsp/thread/b48c2165-85f6-48bd-ac0f-be51dbf87f3d

  • If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action.

    If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action. create an association in the folders option control panel.  Once there, I don't know where to go

    What is the attachment file extension? If you know what program should open with, just do the following.
     
    1. download and save the attachment to the office.
    2. right click on the saved file.
    3. Select: Open with on the shortcut menu.
    4. click on: choose [default] program.
    5. Select: The appropriate program.
    6. check: always use the selected program to open this type of file.
    7. click on OK.
     
    This should allow you to open these attachments directly from email address now.
  • my computer tells me that (this file does not have a program associated with an association in the Panel options files to perform this action.create)

    my computer tells me that (this file does not have a program associated with to perform this action.create an association in the Panel options files) when I try to click on a link

    Hi rayperkin,
     
    -You are trying to open this link from a Web site or is it an application?
     
    Follow the steps listed in the article given below to resolve this issue:
  • I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.

    Original title: problem e mail

    I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.

    Suggestions;

    1. make sure that your e-mail program is your default program.

    2. make sure that your Internet Explorer, or your main browser has all its faults.

    You can do both of the above by following these steps...

    Start button > right column, click default programs > click Set Your Default programs...

    1. click on your e-mail program > it doesn't say "this program has all its defaults"?
    If not, click on choose by default for this program > check all boxes below the list > click on save when finished.

    2 do the same as above for your Internet Explorer, or your main browser.

  • This file does not have a program associated with it for performing this action. Create an association in the set association Control Panel

    Original title: associate together

    Hi all

    Whenever I click on an icon, it comes up with an error message saying "this file does not have a program associated with it for performing this action. Create an associatiob in the control panel of binding together"Corsica, I had a quick glance in the control panel and there is no. Can someone please?

    Hi, blixy16.

    First of all, I suggest that ensure you that your computer is virus-free.  You can start with themalicious software removal tool. Additional suggestions are available in the forum topic Microsoft Answers "How to get rid of malware .

    As a result, to determine if the problem you are experiencing is caused by one or more system files that are used by Windows, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    • Click Start and type cmd in the box start the search.
    • Right click on cmd in the list programs, and then click Run as administrator.
    • If you are prompted for an administrator password or a confirmation, type your password or click on continue
    • At the command prompt, type the following line and press ENTER:
      sfc/scannow (note the space before the backslash)
    • When the analysis is complete, test to see if the problem you are experiencing is resolved.

    If you still have problems, fixes for Windows Vista file association of Microsoft MVP Ramesh Srinivasan can be useful.

    Edit to add this document explaining the difficulty of association file above: corrected my mistake of context Menu Manage computer "this file is not an associated program" in Windows 7/Vista - The Winhelponline Blog

    Corrine, Microsoft MVP (consumer security). This announcement is in my opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS and is provided without warranty and not an entitlement.

  • Cannot open any desktop shortcut, get this message: this file does not have a program associated with it for performing this action. Create an association in the folder option Control Panel > can't open anything in the control panel.

    Cannot open any desktop shortcut, get this message: this file does not have a program associated with it for performing this action. Create an association in the folder option control panel > can't open anything in the control panel. And when you try to download patches get message saying "microsoft cannot find the file. Tried to copy the 'rundll32.exe' file in system32 but does not work, can not even open the clock! Help, please.

    http://answers.Microsoft.com/en-us/Office/default.aspx

    Office at the above link forums

    XP forums:

    http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • Get other themes online - the file does not have a program associated with

    original title: Customize does not

    Hello
    I have windows 7 home prem edition

    When I go to customize and want to "get more themes online"

    I get the following error message:

    This file does not have a program associated with it for performing this action. Please install a program or is it already to create an association in the default programs control panel.

    can you please help me with this problem am experience computer user...

    best regards M E Bailey
    Sydney / Australia

    Hey M E Barakat,

    The next step is to perform an InPlace upgrade to. This process restores your system files with to perform your data personal and programs installed. Need a Windows 7 installation DVD. See the steps below:

    1. close all running applications.

    2. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

    3. in the settings window, click install now.

    Note If Windows does not automatically detect the DVD, follow these steps:

    Click on start and type Drive: \setup.exein the box to start the search.
    Note The placeholder drive is the drive letter of the computer's DVD.

    List programs, click Setup.exe.

    In the settings window, click install now.

    1. click on connect to get the latest updates for installation (recommended).

    2. type the CD key if you are prompted to do so.

    3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

    4. click Yesto accept the Microsoft software license agreement.

    5. on the which type of installation you want? of the screen, click upgrade.

    6. when the installation is complete, restart your computer.

Maybe you are looking for