What does 'user' in the c drive?

I'm running out of space on the c drive, the user takes more space what - what? Can I safely delete?  I am running windows 7

Thank you very much

I suggest you use disk clean and sanitize the system,.

http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

Tags: Windows

Similar Questions

  • WIN 7 does not have the net driver for Asus A2D WHAT CAN I DO. I HAVE THE CONNECTION TO THE LOCAL NETWORK.

    WIN 7 does not have the net driver for Asus A2D. or I'm unable to find it.
    WHAT I CAN DO. I HAVE THE CONNECTION TO THE LOCAL NETWORK.
    Thanks for any idea, address etc.
    DragMil
    You can wito to * address email is removed from the privacy *.

    Try an older driver installed in compatibility mode

    To run in compatibility mode do the following:

    Click with the right button on the installer > properties > compatibility > choose OS

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

  • Satellite A205-S4777 - XP does not recognize the HARD drive

    Hello!

    Recently I buyed a new satellite Toshiba A205-S4777 with Windows Vista home premium installed
    and I noticed too many errors in Windows Vista and the pc is very slow so I decided to downgrade to XP

    I want to directly install Windows XP but the installer does not recognize the hard drive or more exactly controllers!

    I nLite Sata drivers in Windows Xp Sp2, I bought on the microsoft.com site!

    Everything worked well.
    The Installer recognized fine hard and Setup finallased!

    But here's the problem when loading windows and try to pass on gorge yourself sort of blue screen one unreadable!

    And restarts and let, it does all day the same thing!

    I'm afraid that I have not nLite the right drivers.

    Is there anyone Heve downgraded this model?
    Thanx

    Hello

    Maybe you did not use good SATA driver?  :| Who knows
    The point is that there are two different versions of Intel Matrix Storage Manager supports different chipsets.
    I put t know what chipset is in charge of your laptop but you should check this and must also check the description of the Intel Storage Manager and check what chipsets are supported.

    In addition, you should have a look here in this doc from Toshiba:
    [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

    Good bye

  • Satellite A30 PSA30E - BIOS does not recognize the HARD drive

    Hi all
    I have a Satellite A30 (PSA30E) and I start the computer. When I enter the BIOS it does not recognize the hard drive.
    Does anyone no what I can do?
    Is it possible to restore the BIOS?

    Thank you

    Hello

    You replaced the HARD drive by a new one or the BIOS don't recognize the old HDD?

    Usually if the laptop is not able to start and that the BIOS does not see the old HDD then I guess that the HARD drive is faulty.
    If the BIOS doesn't recognize the inserted new HARD drive and then either you ve bought is not compatible, or the size of the HARD drive is just too big.

    Please provide more info. You see error messages?

  • Lost in car-Windows xp does not recognize the slave drive

    I do reinstall xp home, no problem when I did the system does not recognize the slave drive I have.  As far as I can tell that it's all hooked up correctly.  When I go into disk management it does not recognize the drive either.  All of the suggestions.

    Hi james.williams,

    1. How is the drive connected to the computer?
    2. What is the number of the brand and model of the player?

    I suggest that you check the jumper settings and make sure that the jumpers are correctly positioned.

    Make sure they are in the two master/slave jumper and not cable select.

  • Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

    I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

    I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

  • NSLU2 does not recognize the hard drive

    Hello

    I have a NSLU2 on Win XP SP3.

    It does not recognize the USB drives, he wrote that 'drive not formatted '. It only recognizes the USB key as "disk2".

    Current firmware is V2.3R29.

    When I try to update the firmware, the "not enough disk space" message.

    I tried the same disc on a different NSLU2 and it worked fine.

    What can I do my NSLU2 reading displays the disc correctly?

    Thank you very much for your help!

    Markus

    It seems to be a firmware issue... The V2.3R29 firmware. is quite old. The latest firmware is Ver.2.3R63... Hard reset the NSLU2, power cycle it and then try to update the firmware. After upgrading the firmware, reset it again and reconfigure... Disconnect the HARD drive before upgrading.

  • HP Pavilion dv9000 - XP does not see the HARD drive, how to install it?

    Hello

    I try to install XP SP3 on HP Pavilion dv9000, but XP Setup does not see the hard drive.

    Can you please point me in right direction - what I do files and how to add them to the XP SP3 installation CD necessary?

    I guess that somewhere there is a step-by-step detailed guide.

    Thank you

    Enter the BIOS by pressing F10 at startup. If you have the option of Bios Setup to disable the native sata mode, XP will install without problem, no sata driver needed. It will be on the tab of the System Configuration.


    If you do not have the setting in the Bios, it's the driver sata for your machine:
  • Dell Vostro 430 sometimes breaks down and does not find the hard drive in the bios

    So I have this old - ish Dell Vostro 430, intel cpu, windows 7 hard disk sata 250 GB, 4 GB of ram.

    Update BIOS to the latest version 2.4.0

    In certain exceptional circumstances, this PC sometimes crashes in windows, it is restarted, and then when he comes back it does not find the hard drive as a gift. He is not seen in the bios and does not start.

    To fix, I have to unplug the power cable, wait a few seconds, plug in, reboot the computer and it starts normally, load windows and everything.

    So far, I have tried to paginate on another hard disk, reinstall the Windows operating system from scratch, and same thing happens from time to time.

    It is difficult to find the cause of the problem, because this happens very rarely.

    Sometimes, when the pc is turned on for the first time in the morning, the hard drive is not found by the bios and we reappear at the same trick (disconnect the power cable) to take him back.

    When it crashes when using inside Windows, it seems that the reason is the computer can't find the hard drive.

    Such computer is out of warranty.

    It would be nice to just throw this computer because it is still fine for the work it has to do, + I have Windows and Office OEM license on it, as well as many other software that I have to reinstall etc.etc.

    No idea what I could troubleshoot?

    Maybe change the motherboard? How can I buy a new motherboard for an out of warranty Dell?

    While possibly keeping all the OEM licenses (Windows 7 and Office 2007).

    Desu
    .. .once in a while...

    That will make hard to resolve this situation.

    • Have you tried to replace the battery in the motherboard, if nothing else than to exclude it? CR2032, 3-volt lithium-ion, ~ $2 at discount stores. Do not forget to open the BIOS Setup and copy down all current settings first because remove battery BIOS resets the default values, which is maybe not correct for your specific system.
    • Have you tried another SATA data cable, or reinstall the existing at both ends?
    • Have you reinstall RAM and PCI card in their slots?
    • Have you used canned air to blow out the dust?
    • Maybe a power supply problem... ? If insufficient voltage, he could not start the HARD drive quite fast at startup, or quick enough after your option settings to be able to turn the HARD drive off when it is not accessed, what may cause this error message 'not found '.
    • If you use a power strip or surge protector, have you deleted and the PC connected directly to a wall jack?

    If it is a motherboard defective and you replace it with another jury of Vostro 430, you shouldn't have any problems with Windows or Office licenses. Assuming you are using Windows Dell reinstall for exact same version of Windows drive that was installed at the factory, it should not even ask the product key, if you must reinstall Windows on the HARD drive. But even if she asks, there should be a sticker somewhere on the PC with your unique product key so you can enter if the installer made the request.

    and make sure you have the Office product key too...

  • Dell Inspiron 531 s problem of power/does not recognize the hard drive

    My Office does not illuminate. I replaced the power supply. No, it powers on but does not recognize the hard drive. It gives an error as SATA 0 None SATA 1 no SATA 2 No. How do we know that the cables are properly connected. I feel like I'm very close to solving the problem but don't have a clue what that next step to follow

    The original PSU had 4 sets of cables and connectors.  The new power supply has 5 sets of son.

    aries7531

    From your post, I guess that the configuration of the system now recognizes the hard drive?

    If you do not have a floppy drive, then BIOS can find the player who isn't there, it returns this error.

    Make sure that the floppy drive [drive A] is disabled in the [BIOS] installation system, page 173, so that it is no longer looking for the disc and see if this stops the error message.

    If the hard drive is recognized in the configuration of the system, he now knows in windows "My computer" or in "disk management, [right click on 'My computer' and select 'Manage', then disk management]."

    Bev.

  • Windows 8 does not see the hard drive on the Satellite A200

    Windows 8 does not see the hard drive on the A200.
    How to install it?

    S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
    The HARD drive is visible in the BIOS?

    Do you use the original disc from Microsoft of Windows 8?

  • Tecra S3: Installation of Vista does not recognize the HARD drive

    I try to install Vista Ultimate on my Tecra S3, but installation does not recognize the HARD drive.

    I tried to find the driver for Vista for my computer, but not found RAID.
    Tried it with XP drivers, but no longer works.

    Do you have an idea where I can download Vista drivers for RAID?

    THX

    Hello

    Your suggestion is good. The Tecra S3 supports the RAID, and the RAID driver is required to install the OS on the HARD drive.
    On the European driver Toshiba page I found a RAID for XP driver.

    I put t know if this driver will run under Vista, but I recommend to test.
    The RAID XP 1.3.8.0 driver version can be downloaded from this site:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

    Please note; You can store the RAID driver on an external USB and Vista should recognize it!

    Good luck

  • Qosmio F30 - 112 - Windows XP does not recognize the HARD drive

    Hello.

    I have a Qosmio F30-112.
    I tried to install the Windows XP Professional instead of the Media Center edition.
    However, during the execution of the installer, my laptop does not recognize the hard drive. Therefore, the installation cannot continue.

    I thought it might be a problem of corruption with my laptop and reinstalled Media Center Edition successfully.
    But when I try to install XP Professional it always gives me the same error.

    Suggestions for the configuration of the BIOS or solutions for why this is happening?

    Thanks in advance.

    Hello

    Just a question:
    You are looking for in this forum for other similar issues with regard to the installation of Win XP and lack HARD drive? I doubt

    The fact is that your notebook has a SATA controller and you need a SATA (Intel Matrix Storage Manager) driver.

    You should have a look here in this doc from Toshiba:
    [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

    and should also search this forum for other threads

    Good bye

  • does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

    Original title: Pny flash drive problems

    I used my flash drives on my pc with xp as os without problem. I then took the same flash drive for my laptop with the windows operating system 7, I opened the files. Then I went to the computer with xp, and the pc does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

    Hello

    Do you see these error codes in Device Manager?

    Plug the flash drive and run the Fixit of the article below and check out them.
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/

    See also the section below, which might be useful in solving the problems of USB devices.
    Advanced troubleshooting tips for General USB for Windows XP problems
    http://support.Microsoft.com/kb/310575

  • While trying to install XP Pro on T60 he does not see the hard drive, but the fact of the laptop.

    Have a lenovo t60 disk opportunity was wiped out when trying to install XP Pro, I get message windows does not see the hard drive, but he sees the laptop.

    If its SATA you need SATA drivers to install. Since the XP CD doesn't have the SATA drivers on it

    Unless you disable the AHCI in the BIOS. Or their wake.

    Or get the SATA drivers. Check out them on diskette, press F6 during installation and then add them.

Maybe you are looking for

  • Recovery of product does not work

    I believe I had crashes on my computer so I decided to use the recovery of the product CD. Whenever I try to restore it, it blocks to halfway through the writing of the Ghost image on the hard drive. Could you all this be due to a bug/virus on the ha

  • I want to delete a favorite, you did not, I can't right click

    I want to delete a favorite, I can't right click, I can't just hit delete, if I highlight opens.

  • F4280 all-in-one print is not in Windows 7

    Hello I have the F4280 all-in - one HP printer. This printer works with Vista or XP machine, but not any portable computer with Windows 7. I had downloaded and installed software & driver for HP several times. Nothing works. I ran the HP software doc

  • DV7-6c02em

    Hello My girlfriend has a HP dv7-6c02em. First, I want to add SSD and HDD in second. I wonder if this cable is suitable. HP Pavilion DV7-6000-6000 DV7T DV7t Sata SSD HDD long Cabel 2te http://www.Amazon.co.UK/GP/product/B00B5RQW6I/ref=pd_luc_sbs_01_0

  • High definition Audio Device Code 10 - device cannot start (tried all the typical solutions)

    Hey! Let me first, I use a laptop Aspire V3 - 772g. After the recent update of Windows 10, I had problems getting past the lock screen (took FOREVER to get to the point where I could enter my password) and it had been awhile, so I reformatted ('reset