What files are backup using Windows backup

Similar Questions

• Error message "Files required to use Windows Update are longer registered or installed on your computer."

  "Files required to use Windows Update are longer registered or installed on your computer" is the message stop & updated. I owned the computer for more than 7 years & used XP all the time. Why does the update fail / stop now? What should I do to get it working?

  Hi B_Tan,

  Please take a look at the following information previously published by TaurArian:

  Some have reported that simply re-register the MSXML3. DLL seems to fix the problem.
  1. click on start.
  2. choose Execute.
  3. in the run box, type: regsvr32 MSXML3. DLL
  Press OK

  If this did not help, you may be re-recorded some files more:

  1. click on start.
  2. choose Execute.
  3. in the run box, type (pressing well after each one): -.

  net stop wuauserv

  Repeat the following:
  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 wuaueng1.dll
  regsvr32 c:\windows\system32\dllcache\wucltui.dll
  regsvr32 wuweb.dll
  Regsvr32 MSXML3.dll
  regsvr32 qmgr.dll
  regsvr32 qmgrprxy.dll
  regsvr32 jscript.dll

  net start wuauserv

  FYI -.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  I hope this helps!

• What will happen to the computers that are still using Windows XP?

  Original title: Windows XP?

  So, what will happen to the computers that are still using windows xp? Say, my computer is too old to support something newer than XP

  On April 8, 2014, support and updates for Windows XP will be more available. Don't let not your PC not protected. 
  http://Windows.Microsoft.com/en-AU/Windows/end-support-help

  You need to consider your options carefully. You can always run XP but be aware of the risks. It is always your decision what you decide to do.

  Cyber-threats for Windows XP and advice to small businesses and individual consumers

  http://blogs.technet.com/b/Security/Archive/2014/03/24/cyber-threats-to-Windows-XP-and-guidance-for-small-businesses-and-individual-consumers.aspx

• After doing a HP-assisted recovery, when I click on Windows Update, I get a message saying "files required to use Windows Update are longer registered or installed on your computer.

  I am unable to open Windows Update Express option, when you click on Express, I get a message saying that "files required to use windows update are longer registered or installed on your computer." I tried both options following the message, with no luck at all. Belarc says that the 125 Microsoft updates are missing. I have Windows XP Home Edition sp2 disk. Suggestions, please.

  If xp is always saved, then try to open the internet options settings,

  view of objects, search for & R.click on the WU & MU active x objects

  (one at a time), select "update", they are part of windows update

  Active x, necessary for updates... Express update could be among them

  Moreover, however it is not a part of windows...

• How can I find out what files are multiplying?

  More about 700 meg hard drive / day.    How can I find out what files are multiplying?   I have the total space 1 t, exhausted 600 g.   Is there a directory command in w7?

  Tried to reset in time earlier, but had «system restore did not finish sucsessfully.»  Your computer setttings, unmodified files.   unspecified error has occurred (Oxc0000022)

  Recently installed WD backup items and ran about 4 times, but says backup windows no backup has never been run.

  Thanks for any help:

  http://answers.Microsoft.com/en-us/newThread?Forum=Windows&threadtype=questions&cancelurl=%2Fen-us%2Fwindows

  Investigating disk space use to download, install and run Treesize (freeware) as an administrator.
  http://www.Jam-software.com/treesize_free/

  Place a Treesize shortcut on your desktop, right-click on the icon and select run as administrator to open Treesize. You must run as administrator to see all the files.

  Information about Treesize
  http://www.Jam-software.com/treesize_free/

  When you open Treesize scan select in the Menu and you will see a list of drives. Click on C and it will generate a list of files. Display names and 6 larger files sizes and the total at the top of the list.

• Whenever I start the system complains that the following files are missing, c:\\Windows\System32\igfxpers.exe, igftray.exe and hkcmd.exe.

  Original title: files missing error

  Whenever I start the system complains that the following files are missing, c:\\Windows\System32\igfxpers.exe, igftray.exe and hkcmd.exe. Everything started after I ran scan and scan deleted some files infected. However, I can use the system. Where and how to download the missing files? Or how the system does not deliver messages?

  Simon

  Two of the three files are probably part of the malware infection and not the files infected. The third is probably the same details in this link:
  http://www.Runscanner.NET/file/Hkcmd.exe.html

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig. You will find the three points and they will have a description 'file is missing' against everyone. Your antivirus software has removed the files, but not the startup entries in the registry. All you need to do is delete the entry using Autoruns to eliminate the error messages.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• Unable to find files and folders using Windows Search

  Original title: Windows search returns no results, but only for a single user - another user works very well - Windows 7

  All of a sudden windows search of files and folders (from windows Explorer) do not return results - even if I'm looking for in a folder with a file name that I know is in there.  However, it works for the other user on this system.

  The things that I tried or looked at who did not work:

  • Configuration of the default folder options.
  • reconstruction of the index
  • sfc/scannow - said "windows Resource Protection found corrupt files but was unable to solve some of them.  I have the CBS. If necessary log file.
  • research done that windows has been archived 'Tour of the windows features turn on or off.
  • Ran the registry of Windows Search - he said that he fixed two things (cannot tell you what they were now), but still, it does not solve the problem. When I run it says once again that there are no errors.
  • I checked this registry key:
    HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerAdvanced\\\ and key Start_SearchFiles - which was set to 2, the default
  • Under Customize Start Menu - search with public folders is selected under search for other files and libraries.

  It still does not work.  The search box in the start menu seems to work, but not for anything I get.

  Frustrated!

  ~ Diane

  Hi Diane,

  Thanks for posting your question in the Microsoft Community forums.
  The description of the problem, I see that you cannot search files and folders using Windows Search.

  I appreciate your efforts try the troubleshooting steps to resolve the problem. Don't worry; Let's try a few steps that will help you solve the problem.

  Did you the latest changes on the computer before this problem?

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  
  Open the troubleshooter for search and indexing
  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  
  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Improve Windows search using the index: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  Check out the link for more information.

  
  Change advanced indexing options
  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  
  Advanced search tips in Windows
  http://Windows.Microsoft.com/en-us/Windows7/advanced-tips-for-searching-in-Windows

  Let us know the status of the issue after you perform the troubleshooting steps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• What files are jar are required connections search weblogic factory

  What files are jar are required to use jars:
  
  Javax.naming import. *;
  Javax.jms import. *;
  
  
  Basically, I'm looking for the connection factory created in weblogic 10 g. Found the following code, but can not run, seems to missing a few pots of runtime.
  
  Please suggest.
  
  
  Extracted code example try:
  
  ////////////////////////
  public static void sendMessage (String url, user String, String password,
  String cf, queue of string, messageText) {}
  create InitialContext
  Context ctx = null;
  Hashtable ht = new Hashtable();
  HT.put (Context.INITIAL_CONTEXT_FACTORY,
  "weblogic.jndi.WLInitialContextFactory");
  HT.put (Context.PROVIDER_URL, "t3: / / localhost:7101" "");
  HT.put (Context.SECURITY_PRINCIPAL, user);
  HT.put (Context.SECURITY_CREDENTIALS, password);
  
  System.out.println ("putting into context');
  try {}
  CTX = new InitialContext (ht);
  System.out.println ("context:" + ctx);
  Use the context of your program
  }
  catch (NamingException e) {}
  a failure occurred
  e.printStackTrace ();
  }
  {Finally
  try {ctx.close (;})
  catch (Exception e) {}
  a failure occurred
  }
  }
  /////////////////////////////
  
  
  Thank you
  SAI

  try to build a wlfullclient.jar
  http://docs.Oracle.com/CD/E13222_01/WLS/docs103/client/jarbuilder.html

• What files are needed to access the aspect of the heritage of GarageBand?

  What files are needed to access the aspect of the heritage of GarageBand? After the upgrade my MacBook Pro and Mac Pro, the appearance of the inheritance is only accessible to the general public on the MacBook Pro. What files are needed for these instruments of the legacy and the filters on my MacPro? I read that the removal and reinstallation of GarageBand 6.05 will do but 6.05 GB certificates have expired and is no longer allow it to be installed. Any help is greatly appreciated.

  I read that the removal and reinstallation of GarageBand 6.05 will do but 6.05 GB certificates have expired and is no longer allow it to be installed. Any help is greatly appreciated.

  You always have an installer for GarageBand 11?  An installation of iLife 11 DVD or the DVD Installer original system for snowLeopard with applications for funding?

  You can install GarageBand 11 of these media, if you set the date system your mac to a date until the installer has been released. Then, the certificate will be valid.

  the appearance of the inheritance is only accessible to the general public on the MacBook Pro.

  But because of legacy patches are available on your MacBook pro, you can copy all the missing files from the library of the Instrument and loop library in your other Mac.

  Compare these files in the folder/library on your system drive on Mac of high level.

  The instrument library: Library/Library/Application Support/GarageBand/Instrument.

  and loop library: / Library/Audio/Apple Loops/Apple /.

  Copy all the files to the corresponding folders on your MacBook Pro that is not there.

• What files are identified as "Other" in memory when checking for storage?

  What files are identified as "Other" in memory when checking for storage?

  All files that are not in the categories with names.

• where can I find out what files are waiting to be burned to a disc? I have an old version of XP

  When I inserted a disc to burn files on, he gave me the message that there are queues to be burned to the disc.  How/where can I find out what files are waiting to be burned?

  They must be stored in the folder %USERPROFILE%\Local Settings\Application Data\Microsoft\CD Burning

• A few bookmarks do not show so I asked to restore (in the menu bookmark)-now all disappeared. What files are stored bookmarks in (in the system) so I can use time machine to restore from an earlier date?

  I do a lot of work on the web and I have a ton of bookmarks that I use to maintain sites. I lost all!

  I tried to install a new copy of the program and restore the file Mozilla from the library to the user (in time machine), but all I have is a white space where was the bookmarks bar! I also have a problem trying to re-enter manually all bookmarks. I can open the bookmark drop down, but I can't save all bookmarks. Firefox don't mark all new pages. I still all the passwords in the preferences if I don't want to install a new copy of the program and lose these.

  Are there other system files that Firefox uses that I can restore the backup to solve the problem?
  I have a Mac Pro and I am OSX 10.6.4
  I have used Firefox for years and never had a problem before.
  Can anyone help - please?

  This may be a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

• Check orphaned vmdk files are not used before deleting

  Hi all

  I'm working on a site and after looking through the vSphere platform, it came to light that there are THOUSANDS (well more than 10,000) of orphaned VMDK files, it seems that there is a bug in the backup solution (you think).

  In any case I was hoping someone could help me please do you know if there is a way to confirm that a vmdk is certainly not necessary, the tools I've used to identify the orphaned VMDK are the script here practically Jason: orphaned VMDK files and RV tools (health tab).

  What I need to do now is to automate the removal of the VMDK if possible, but I need to run a test of consistency first to ensure that the files are actually orphans.

  Any help or advice greatly appreciated.

  Hello

  I can give you only a few rough concepts and advice because I do not know the details.

  First, he yells for PowerCLI, below, you will get a few commands. If you are not familiar with PowerCLI/Powershell I highly recommend to get a grip on it.

  Second, I'll assume that orphaned files = unused files. If this isn't the case, you can rename/move file instead of delete and wait as these phone calls / tickets

  Thirdly, since we will work on files on data warehouses, we will use "vmstores" PSDrive. Get-PSdrive cmdlet will give you all the readers, that you, one of them is vmstores

  C:\Windows\system32> Get-PSDrive
  
  Name           Used (GB)     Free (GB) Provider      Root                                                                                                                   CurrentLocation
  ----           ---------     --------- --------      ----                                                                                                                   ---------------
  Alias                                  Alias
  C                  52,39         44,97 FileSystem    C:\                                                                                                                   Windows\system32
  Cert                                   Certificate   \
  D                 218,60        149,80 FileSystem    D:\
  E                                      FileSystem    E:\
  Env                                    Environment
  Function                               Function
  HKCU                                   Registry      HKEY_CURRENT_USER
  HKLM                                   Registry      HKEY_LOCAL_MACHINE
  Variable                               Variable
  vi                                     VimInventory  \LastConnectedVCenterServer
  vis                                    VimInventory  \
  vmstore                                VimDatastore  \LastConnectedVCenterServer
  vmstores                               VimDatastore  \
  WSMan                                  WSMan
  

  To get your typical data warehouse 'cd ":

  CD vmstores:\your_vcenter\your_cluster

  On each level, you can do 'ls' or 'cmd '. Tab completion works on everything in order to use it

  From now on, all depends on what you already have and what it looks like. These files have a naming pattern names containing the name of the virtual machine or other information ("backup", "tmp" etc.)? You have these names stored somewhere? In text or csv file?

  I guess you have the list of files in the text file. So much more simple method would be to be scan all data warehouses and all files. As you can imagine it is very time and resource consumption, so not recommended to all

  #we're importing filenames to variable
  $oldfiles = Get-Content your_text_file.txt
  cd vmstores:\your_vcenter\your_cluster
  $oldfiles | ForEach-Object {
  #we're recursivly looking for file stored in $_ special variable (current object)
  $deleteme = Get-ChildItem $_ -Recurse
  #deleting the file
  Remove-Item $deleteme.PSPath
  }
  

  If the file names that you already can somehow correspond directly to the VM, then we could use a more intelligent approach.

  Let's say we have the testVM001 - bak003.vmdk and VMname file is testVM001. We can remove all characters after the 9th tank and then work on it:

  #we're importing filenames to variable
  $oldfiles = Get-Content your_text_file.txt
  
  $oldfiles | ForEach-Object {
      #getting VM name
      $vmname = $_.Remove(9)
      #getting VM path
      $vmpath = (Get-VM -Name $vmname |Get-Datastore).DatastoreBrowserPath
      #combining full path
      $fullpath = $vmpath + "\" + $vmname
      cd $fullpath
      #deleting the file
      Remove-Item ./$_
  }
  

  These are simple ideas, it could be useful.

• two of my sent files are missing from windows mail, and I am unable to trace it? Please let me know how to find the missing folder

  Until a few days back all sent files has been noticed but suddenly two of the sent files are missing and I am unable to find the same.  I use vista and windows mail.  Please let me know how recover/find missing files.

  Thank you
  Mahesh

  Try searching *.eml and make sure you include hidden files and folders in the search parameters.  See also here for the Organization of store message (www.oehelp.com/backup.aspx#wm).  You should be able to use the browser to go to the directory of sent items under the directory of local records and the actual messages will be located there.  It may be useful to compact and repair the database (see www.oehelp.com/WMUTil/) and make sure that everything in the folder, you saw the value. Current view | Show all messages.

  Steve

• How to manually upwards Apple Mail? What files are essential?

  Now, I need to back up my Mac mini on a combination of the key USB and DVD.

  What Apple Mail files are essential to back up? How can I find them?

  I can compress the ~ library > Mail folder? Mail downloads?

  I lost the mail before and I don't want to loose everything if I need restore the e-mail.

  Save all the mail folder in your library to the user:

  ~/Library/mail/v2/

  Local mailboxes are actually stored in this path in the mailboxes folder. But according to the type of accounts you have (POP or IMAP), they could also be in the folder of the account here. Back up the entire file for the mailboxes and data files to go with them.

  Or, you can just it select mailboxes of email you want to save and export to your backup drive.