What graphics card do you have used with the motherboard Asus A8AE THE?

I have an old a1210n with a motherboard A8AE THE with a PCIe x 16 slot 1.0.   I would like to know what graphics cards does anyone have successfully run on this motherboard (see list of models of computer below)?  Unfortunately, which should theoretically work often does not work.   I tried a HD 4850, which produced only blurred video, despite reading a slower hd 4830 and 4650 had worked.

This forum and other research made me some operation card names (which are too slow or too expensive, (I'm looking for a pass of about 1000 Mark): 7800 oc x1600xt, 8600gs, hd 6850, gtx 470)  I was surprised/skeptic on the last 2.

The HD 5770, 5750, 5450, 5870 failed.

At least some of the older hp computers that have the a8ae:

Pavilion a1100e Desktop, Pavilion a1130e Desktop, Pavilion a1200e Desktop Pavilion a1206n Desktop, Pavilion a1210n Desktop, Pavilion a1211n Desktop, Pavilion a1222n Desktop, Pavilion a1226n Desktop, Pavilion a1228x Desktop a1229x Desktop Pavilion, Pavilion a1230n Desktop Pavilion a1243w Desktop a1253w Desktop Pavilion, Pavilion a1310n Desktop, Pavilion a1314n Desktop, Pavilion a1330e Desktop, Pavilion a1330n Desktop, Pavilion a1350n Desktop, Pavilion a1355c Desktop, desktop Pavilion a1357c Pavilion a1383w Desktop, Pavilion Desktop a1428x, Presario SR1020Z Desktop, SR1030Z Desktop Presario, Presario SR1601NX Desktop, Presario SR1602HM Desktop, Presario SR1603WM Desktop, Presario SR1611NX Desktop, Presario SR1614X Desktop, Presario SR1616NX Desktop, Presario SR1617CL Desktop, Presario SR1630NX Desktop, Presario SR1650NX Desktop, Presario SR1675CL Desktop, Presario SR1700Z Desktop, Presario SR1703WM Desktop, Presario SR1707WM Desktop, Presario SR1710NX Desktop, Presario SR1711NX Desktop, Presario SR1717CL Desktop, Presario SR1720NX Desktop Presario SR1730Z Desktop, Desktop Presario SR1738NX, Presario SR1750NX Desktop, Desktop Presario SR1802FR, Presario SR1802HM Desktop, Desktop Presario SR1807CL, Presario SR1811NX Desktop, Desktop Presario SR1817CL, Presario SR1834NX, Presario SR1850NX Desktop Desktop, Desktop Presario SR1830NX

Thank you!

I got the HD 4850 replacement and it works great so far!    Unfortunately, I can't tell what brand, because it was a Chinese generic card.

Tags: HP Desktops

Similar Questions

  • If you have any with the itemrender have a control label and onther a gri data

    Hi friends,

    If you have any with the itemrender have a control label and onther a data grid control.

    In my application, I used list control. The list control's item converter. In my case if I click on the name list control, releated data corresponding to the data grid need to view and control the list as label.

    < mx:List width = "750" id = "Lst_userlist" verticalScrollPolicy = "off" horizontalScrollPolicy = "off" rowCount = "20".
    labelField = "sec_user_first_name + sec_user_last_name" labelFunction = "BindUserName" buttonMode = "true" itemClick = "Click_UserList (event)" > "

    < mx:itemRenderer >

    < fx:Component >

    < mx:VBox horizontalScrollPolicy = "off" verticalScrollPolicy = "off" >

    < s:Label id = name = "{data .sec_user_first_name + data .sec_user_last_name 'lbl_userhead'} ' buttonMode ="true"color =" #000000 "/ >" "

    < mx:DataGrid height = "100%" id = "membershipGrid" alternatingItemColors = "[#DCDCDC, F8F8FF #]" "5" paddingLeft = horizontalScrollPolicy = "off" color = 'black '.
    horizontalGridLines = "false" verticalScrollPolicy = 'auto' verticalGridLines = rowCount = "{membershipArrColl.length 'false'}" rowHeight = "25" "
    borderSkin = "{null}" showHeaders = 'true' borderVisible = "false" dataProvider = "{membershipArrColl}" width = "750" visible = "false" includeInLayout = "false" >

    < mx:columns >
    < mx:DataGridColumn width = "180" headerText = "Name" minWidth = "150" sortable = "true" wordWrap = "true" >
    < mx:itemRenderer >
    < fx:Component >
    < mx:HBox horizontalScrollPolicy = "off" >
    < fx:Script >
    <! [CDATA]
    override public function set data(value:Object):void {}
    Super.Data = value;

    if(Data.home_sec_organization_id==Data.sec_organization_id)
    {
    FileImg.Load ("/ist_shared/ist_images/ist_icons/Modern/gif/16/hot/user_favorites_16_hot.gi f");
    }
    on the other
    {
    FileImg.Load("/ist_shared/ist_images/ist_icons/Modern/gif/16/dis/user_remove_16_dis.gif");
    }
    lbl_Gridcloumn_name. Text = Data + .sec_user_first_name""+ data.sec_user_last_name;
    }

    []] >

    < / fx:Script >
    < mx:Image id = "fileimg" buttonMode = "true" toolTip = "This is organization at the home page of the user" / >
    < s:Label id = "lbl_Gridcloumn_name" width = "200" buttonMode = "true" textDecoration = "underline" toolTip = "User Menu [{data.sec_user_name}]" click = "outerDocument.Click_Name (event); »    / >

    < / mx:HBox >
    < / fx:Component >
    < / mx:itemRenderer >
    < / mx:DataGridColumn >
    < mx:DataGridColumn width = "120" minWidth = "110" headerText = "Username" sortable = "true" dataField = "sec_user_name" / >

    < mx:DataGridColumn width = "100" minWidth = "80" headerText = "OrgName" dataField = "sec_org_name" >

    < / mx:columns >

    < / mx:DataGrid >



    < / mx:VBox >
    < / fx:Component >

    < / mx:itemRenderer >
    < / mx:List >

    Please help a whole for me...

    Thank you

    Mamoudou R.

    If I understand correctly, you want to display a different set of data in a DataGrid control for each selected item in a list?

    I would just use link:

    
    
    

    This assumes that this list is filled with the data elements in a format similar to this:

    {

    label: "Label 1 list."

    data:]

    {col1: "col1", col2: "col2"},

    {col1: "col1", col2: "col2"},

    {col1: "col1", col2: "col2"}

    ]

    }

  • What graphics card do you recommend

    Hi everyone wants to get the new graphics card and I want to know what is the best for my Red 4 K video.

    I use: Adobe PR & AE

    Computer will be: HP Z800 with 16 GB

    Graphics card:
    ATI over-pants V8750
    NVIDIA quadro fx 4800
    NVIDIA quadro fx 5800
    NVIDIA quadro fx 1800

    Thank you

    I'm a monster pc for the person of the United Nations. IF you wish, you can sendme that send you an email and I can share with you everything I use, and even I can give you information son for OC so you can have the best of the best.

  • 10.1.2 iMovie crashes while editing. Failed attempts to re - open. Open with the option key down key allows you to delete the preferences but contains a relative error incompatible graphics card will then appear.  With the help of El Capitan

    iMovie 10.1.2 falls down during editing of a film, usually by doing something like adding a title or a transition.  Failed attempts to restart.  Try to reboot with the option key + command allow you to remove preferences.  Then either receive an error indicating that the graphics card is incompatible or the application block requiring a force quite.  Restart or stop the iMac translates the suspended system requiring a manual stop holding down the Start button.  Restart in Safe Mode and then the normal startup will allow iMovie to load.  But after a few minutes of work with the program, it crashes and scenario again.  I use El Capitan 10.5.11 on an iMac of 2013.  I deleted the iMovie app and reloaded it, no change.  Someone has an idea for a fix?

    What are the specifications of your clips you want to change? Try to create a new user and see if FCPX is behaving.

  • problem rotating rectangle (selection of corners) after you have created with the rectangle tool in illustrator

    I use the latest version of the CC of the Illustrator. When I draw a rectangle by using the rectangle tool, I no longer seem to be able to select the corners to resize the rectangle or the cursor turns to a rotate icon when I put the mouse just outside the angle. Now I know that AI rectangles treated CC differently, with the direct rectangles and rounded corners options and the processing area opening automatically. What I was asking and hope is not the case, is if it's that costs that can go right and resize using just the mouse? I know that there is the "object > shape > Expand" option, but having to do whenever I have a rectangle is time consuming and adds and the extra step that was necessary before. I saw a tutorial on Lynda where the instructor drew a direct rectangle in CC AND was still able to resize by grabbing the handle angle «» Anyone know if it's just a setting that I need to start or something even easy, or it is done inadvertently Adobe workflow longer trying to make it easier? And Yes, I have "show encompassing" selected under VIEW.

    MOD indi-go girl,

    I'm afraid that have met you the Rectangle Live bug that is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

    Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

    To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

    A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

    https://forums.Adobe.com/thread/1587587

  • HP laptop - 15-r244tx: NVIDIA graphics card driver not to proceed with the installation of my new laptop HP 15-r244TX (portable)

    I bought a new laptop HP 15-r244TX. When I'm looking in the Device Manager I can see that the 2 drivers are not installed:

    1.Intel (R) 8 series xHCI HC - 9 31

    2.3D video controller

    When I try to install NVIDIA graphics driver an error is coming as driver intel not installed.

    I installed Windows7 (64-bit) and downloaded the driver on the site of hp for this model of laptop.

    In my view, 3D video controller represents the NVIDIA graphics driver.

    Please help me so that I can properly install these 2 drivers.

    Hello:

    That's what I suggest you try...

    1 install the utility driver Intel chipset installation and reboot.  The second listed file is the auto install file.

    https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-

    2. install the Intel HD graphics driver and restart.  The first file listed is the automatic installation file.

    https://Downloadcenter.Intel.com/download/25232/Intel-Iris-Iris-Pro-and-HD-graphics-driver-for-Windows-7-8-8-1-64bit

    3. install nvidia HD graphic driver and restart.

    This package provides the driver that allows the graphics from NVIDIA high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp69609.exe

    If the graphics drivers from nvidia at the address above do not work, try one directly on nvidia...

    http://www.nvidia.com/download/driverResults.aspx/89121/en-us

    The xHCI Intel (r) 8 series HC - 9C31device this driver needs.  Download, unzip and run the setup.exe file.

    https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-series-and-C220-C610-chipset-family

  • How about a kb shortcut to highlight with the left hand after you have selected with the right hand?

    It would be so easy to use and quick to highlight through an easy shortcut on the left side of the keyboard

    (vs drag, right-click and click right pullmenu on highlighting)

    I do this in MS Word (redefined Ctl - Q)

    JFD in Paris

    There is a such shortcut: U

    You just need to go first in Edition - Preferences - general and check the box "use the single key accelerators to access tools.

  • is not compatible with the version of windows you are using, with X 86 or X 64

    My son downloaded something and now I can't use anything on my computer, I get "not compatible with the version of windows that you are using, with the X 86 or X 64... I uninstalled it but it will not go away, I tried to do a system restore, but I get the same error... ideas?

    What antivirus you typed the problem started?

    It seems fishy to me, it could be a virus that has been downloaded at a given time, perhaps even until this program was installed. I would try an online virus scanner.

    And: http://quickscan.bitdefender.com/en/ (from what I hear, it removes something fishy, so be careful!)
    It should work with IE (Internet Explorer).
    Curiously, the ones I tried before I could not find, so I did a quick search and these look good.
    I forgot to ask sooner, but you can open command prompt (start > Accessories > try click right-click on command prompt, and then run as administrator)?
    I hope this helps!
    PS What version of Internet Explorer you have?
  • I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

    I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

    Describe how you run chkdsk.

    That is what the report said: you have problems with the sys file?

    CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

    If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
    Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

    Here's how Microsoft explains this observation:

    "... CHKDSK may report that the disc is damaged, even when there is no
    current real corruption. This can happen if NTFS happens to modify
    areas of the disc on behalf of some programme activities that CHKDSK is
    review at the same time. To check a volume correctly, the volume
    must be in a static state, and the only way to ensure that the State is
    to lock the volume. CHKDSK only locks the volume when /F or/r (which
    involves the 'F') is specified. For example, you may need to run CHKDSK more than
    time so that it can complete all the steps in read-only mode. »

    If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

    Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
    Restart by answering Yes to the question:

    Would you want to check this volume to be the next time the system restarts?

    If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
    chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

    If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
    Winlogon events and a source have the date and the duration nearby time chkdsk.

    It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

    Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

  • Tecra M4: How to know what graphics card I have (6200, 6600)?

    Hello
    I buyed a Tecra M4 and don't know what graphics card I have...
    The shop said, it's a gforce go 6600 with 64 MB, but now I've read, that there is only one with 64 MB 6200 and 6600 with 128 MB...
    Windows and analyse the tools to say, it is "NVIDIA GeForce GO 6200 TE 64 MB / 6600 128 MB TE...»
    So, how can I know which one I have?

    Hello

    Have you checked the Device Manager? I think that here you can find a s information on your subject of an integrated graphics card.
    The second possibility is the use of the DirectX tool. Please enter in the window RUN the dxdiag command. Then the directx should appear, and you will find the detailed description on the graphics card and the properties.

    But as far as I know that the Tecra M4 has been delivered with nVIDIA GeForce FX Go6200 64 MB or 128 MB card nVIDIA GeForce Go6600 FX.

  • What graphics card is compatible with my presario sr1710nx pc.

    What graphics card is compatible with my presario sr1710nx pc?  The current one is dead and I get nothing on my screen and I tried to connect another monitor and still nothing.  So I guess it is the graphics card.

    Hello:

    It is an old model.

    The form of State that he took (integrated graphics).

    If you are sure it is just the graphics that is kaput (you would like to know if you can hear the Windows startup and logon music sounds or something) then...

    I'd get a used Dell Radeon HD 2400 on eBay that should work for you very well, but you will need to have a monitor with a DVI connection and DVI cable.

    This is the cheapest I could find.

    http://www.eBay.com/ITM/ATI-Radeon-HD-2400PRO-256MB-PCI-Express-video-card-ATI-102-B17002-B-used-/121232926546?PT=PCC_Video_TV_Cards & Hash = item1c3a0ba752

  • What graphics card will work with my Dell U2711 to 2560 x 1440?

    I just bought a Dell U2711 monitor I want to use with Photoshop at its native resolution of 2560 x 1440. I also have a Dell E2311H to use dual monitor with it in a configuration.

    The monitors are connected to a card mother with an integrated video chipset ATi Radeon 4200 with DVI - D and regular 15-pin output video under AMD Gigabyte MA785GM.

    However, the 4200 chipset does not seem to support the resolution 2560 x 1440 Dell as all I get are blurry tinted color characters. The ClearType text gives me just blurry garbage.

    I use the Dual-link cable that comes with the Dell U2711.

    What cheap graphics cards will work for me with this arrangement of material?

    Refresh rate is not important. I'm not a gamer.

    This video card has two DVI and DP and 2560 x 1440 60 Hz will do.

  • I have a hp pavilion a6325 and my graphics card is fried what graphics card is compatible

    I have a hp pavilion a6325 and my graphics card is fried what graphics card is compatible? the old card is a nvidea geforce8500gt but these seem difficult to obtain now. If I wanted to update that is not compatible. C.P. specification is as follows.

    Yes, you could install maps better with a more solid food.

    The card I have chosen for you will work with the P/S of 300W to your PC.

    I have never installed a power improved in any of my PC, so I can't be a great help for you there.

    But if you get the right one that matches all connections from your PC, and fits in place of the current one, you, you should not need to buy anything others.

  • What graphics card work better with digital painting, Nvidia GTX970 or Table K2200?

    What graphics card work better with digital painting, Nvidia GTX970 or Table K2200?
    I know it's much better to have a framework, if you work with 3D, but the framework is also better than the Nvidia card if I want to work only with digital painting?

    Designer Roberto Blake offers some good advice on the graphics cards and Photoshop here.

    http://robertoblake.com/blog/2014/01/best-video-graphics-card-Photoshop/

    and a link to the landmarks of PassMark Software - graphics (GPU) video card Benchmark

  • You can directly download the CC applications and authenticate with my adobe cloud identification information without using the desktop application? whenever I have try with the desktop app it says impossible to arrive on the same adobe servers when I'm c

    Hello

    You can directly download the CC applications and authenticate with my adobe cloud identification information without using the desktop application? whenever I have try with the desktop app it says impossible to arrive on the same adobe servers when I'm connected to the Internet and I don't have any active anti-virus software?

    Thank you

    No application of cc, no clouds. It's the simple truth here. Programs cannot operate without him, since he controls the installation and licensing. the rest, we do not know, since you have not provided any useful technical information. Start by reading this (yet?):

    Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

    What also good technical details are necessary.

    Mylenium

Maybe you are looking for

  • Activation of virtual disk

    I have a desktop HP P6 running Windows 7 64 bit and I would like to install some XP programs.  Found that "hardware virtualization is disabled' on my computer have as much as find vds.exe.  How to activate it. Please, I beg you.  Can anyone help?

  • Finder Serach

    OS X 10.11.3 (15 d 21) El Capitan MacBook Air (11 inch, early 2014) 1.4 GHz Intel Core i5 How can I search for files (Outlook) OLK Finder?

  • iPhone battery has decreased with the Apple Watch

    I recently got a Apple Watch for Christmas, I've been very happy together and have (almost) no complaints with the watch in general. Although I noticed that my iPhone's battery life has decreased considerably since I've matched with Apple Watch. Inst

  • 5420 MG will not print text. Only graphics

    Hello ~ I just bought the printer MG 5420, after the death of the previous Canon printer.  When I printed the test page, it only printed the image of Microsoft of four small diamond, without text. My computer runs on Windows XP.  I downloaded the dis

  • Problems to connect via the Cisco VPN client IPSec of for RV180W small business router

    Hello I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates success