What hardware adapter is used to connect a Dell Axim X50v to a USB-6009?

Similar Questions

• What wireless adapter to use

  My computer has two wireless adapters - Microsoft virtual wifi or qualcomm-atheros ar9485 802.11b/g/n wifi adapter miniport card. Which of these adapters should I use for my home network?

  The "Microsoft virtual wifi miniport card" is not a true adapter. It is a "virtual card" for use other than the connection to your local router or home network. Please use the adapter Atheros AR9485 802.11b/g/n connection with your local router / home network.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Want to make my Acer Aspire X 3475 able to use the connection to the wireless network

  How should I do and what wireless adapter to use? Modem/router is Netgear CG 3000.

  Hello

  I recommend the TP-Link boards PCIEx1 for your office.

  For example, this model: TP-LinkTL-WN781ND (including regular support and a low profile support).

• Closing removes all the saved passwords used to connect automatically to YouTube and Hotmail

  Moose title: stop, my sign plunges of Hotmail and You Tube, never used to give up sign ins?

  Locking computer removes all sign ins.

  Never used to do this. As always, I clicked on

  Stay connected Hot Mail and you Tube.

  How can I fix this.

  Nuts will sign in everything what it after shut down.

  Hello

  1. what browser do you use to connect to Web sites?

  2 when was the last time it was working fine?

  3. This only happens for this website or any websites?

  4 did you last modified the software on the computer?

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Store passwords for automatic logon

  http://Windows.Microsoft.com/en-us/Windows-Vista/store-passwords-for-automatic-logon

  Fill in website forms and passwords automatically

  http://Windows.Microsoft.com/en-us/Windows-Vista/fill-in-website-forms-and-passwords-automatically

  I hope this helps.

• I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up.

  cable not connected network adapter

  I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up and do not use any type of router and I'm not on a network. I also tried to disable my network card & it still says the same error. I have an internal network card that came w / the computer (NOT a PCI one) and I wonder if there is a cord or a plug inside my computer that must be plugged. I made some changes on the internal hardware and might have missed an and I didn't have to open my Tower if it wasn't. It's a big hassle! Help, please!

  Hello

  1. Once you get the error message?

  2. do you get the error when you try to disable Norton anti-virus?

  3. are you able to access the Internet explore?

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• What is my Skype Id when you use facebook connect

  What is my Skype id when you use facebook connect I can not find not to give people to connect to me thank you very much

  Traore can use your generic name of Skype:

  Facebook:yourname

  where yourname is the name you use to log into Facebook.

• Should what app I use to connect my ACER Iconia 8 tablet wireless to my Samsung TV compatible dongle?

  How can I move apps on my ACER Iconia Tablet 8 from the internal memory to the external micro-SD card installed?   Also, can what app I use to connect wireless to my Samsung TV with a dongle on this subject?

  official app from Samsung?

  https://play.Google.com/store/apps/details?ID=com.Samsung.companion

  on applications on SD card, applications of the system (the default application installed) can be moved; downloaded application can be moved if they have options.

  settings/applications

  Locate the application that you want to move, press and select move to SD card

  Note that this move (if possible) a part of the application, most of the files will remain in the internal memory.

• HP Envy 17-j120sr: what wi - fi adapter is used?

  Hi all

  I am owner of HP Envy 17-j120sr.

  Please indicate what model of wireless adapter is used in this laptop?

  Please provide a link for driver for Windows 7 for adapter wi - fi.

  Thank you.

  Hello

  Download the driver from the link below.

  Model is Intel 7260/3160 Wireless LAN

  http://www.driversguru.com/driverdetail/2151609-Intel+7260+3160+wireless+LAN+driver+for+Microsoft+Windows

• Windows 7 Home Premium 32-bit on a Dell Studio 140g running a NETGEAR WG111v2 54Mbps Wireless USB 2.0 adapt and loses the connection permanently

  I have a problem with this program-it very often loses the connection, so with any live video as a conference, he fall causing problems with, naturally, the frustration on both sides. The router is in another room may be just 25 feet away maximum which the signal passes through 1 wall and offered "free of charge to AT & T TV and Internet clients" so a technician said as saying "it's just a basic router", but the signal goes further to a TV, another 20-foot more away and had no problem connecting unless it is with the AT & T network itself. Even if he reconnects automatically most of the time, but sometimes I have to manually reconnect which can take of time also a lot of time. I had another SATA driver and separate, which was working fine then one day abruptly stopped and now that the driver to reconnect and I was forced to use the old and original driver and I'm back with the same problems. I can't find where it is that I found this other, independent driver, even with a search, and now I have no idea how to solve. I tried all suggestions with Microsoft Fix It without modification done or as it says "no changes have been made, your driver is up to date" and I have tried these suggestions and now I'm here. I also went to CNET to search for a driver, but not luck to everything I've read about the drivers there. Finally, I intend to go with another program called Easy Wifi Radar and I don't know what would be better to use Wifi adapter and since I have a few target (store) [s http://www.target.com/s?searchTerm=wifi+adapter & category = 9975894% 7CAll % 7Cmatchallpartial % 7Celectronics & lnk = snav_sbox_wifi + adapters] I guess I'll take the adapter on their part and their site search , I see a lot to choose gift cards, but who would work better with my system and this program of "Easy_WIFI_Radar"? Any suggestions? Maybe a better deal with another source of in-store/online Wifi adapter?

  Hi David,

  Thanks for posting on Microsoft Community.

  I understand that you have connected the external NETGEAR WG111v2 USB adapter to work with wireless internet and the connection is intermittent.

  Maybe it's because the wireless USB card driver and it is perhaps because of the hardware (USB wireless card) itself.

  Try the suggestions below and see if it helps.

  Method 1:

  You can try to download the latest Firmware utility from Netgear support site and check if it helps.

  Check out the link below to download the latest firmware for NETGEAR WG111v2.

  http://Downloadcenter.NETGEAR.com/en/product/wg111v2#searchresults

  Method 2:

  Dell Studio Hybrid D140G may come with the card wireless in the generation in it, you can try to disconnect the external USB NETGEAR WG111v2 adapter and try to connect to the network card wireless wireless generation.

  To connect to the wireless network, please visit the link below.

  http://Windows.Microsoft.com/en-in/Windows/view-connect-available-wireless-networks#1TC=Windows-7

  Method 3:

  Try disabling your antivirus software that may block the incoming connection wireless.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information helps, please reply with the status of the issue for further assistance.

• Too often activation required - WHAT hardware change requires reactivation?

  This is the 5th time I have to activate my Vista 64, the third time using the phone system.

  Install-> Activate (normal)
  Switch from IDE to AHCI Mode (+ updated drivers from AMD): reactivate, is not that I like it, but good...
  Updated AHCI driver: reactivate, this time by phone
  Cloning HARD drive to the new HARD disk (S.M.A.R.T. prefail) system: reactivate over the telephone once again, getting annoyed by the beast «on how many computers...» "question.
  Update driver today still: reactivate over the telephone once again, getting more annoyed by the beast «on how many computers...» "question.

  Vista 64 is WAY TOO HYPERSENSITIVE when it come to request reactivation.

  What exactely to material changes to or driver do Vista want to reactivate?

  Is it possible to NOT require reactivation?
  What will I do if activation fails and pleasant phone system or the Lady tells me "installed on computers too", even if it is installed on a computer?
  If you want me to illegally licensed in volume of open e (available due to my work) to avoid this inconvenience, Vista 64 me closer to do it even if I bought it normally.

  Set

  Setsunaaa,

  Product activation Microsoft detects configuration values of the material where the product is installed and creates values of hash for this configuration.

  Product activation can tolerate a few changes in the hardware configuration by allowing a hash value of current to have a difference of the hash value that is initially enabled.

  If the hard disk is reformatted and the software is reinstalled, reactivation is required. Same for the activation grace periods apply to this situation.

  Common changes to hardware, such as the mise a niveau video card, adding a second hard drive, adding RAM, or upgrading a CD-ROM drive, do not require the system to be reactivated. Specifically, Product Activation determines tolerance through a voting mechanism. Ten hardware characteristics are used to create the hardware hash. Each characteristic is rated as a voice, except the network card. The network adapter is rated as three votes.

  When you think about tolerance, thinks that what has not changed, instead of what has changed. The current hardware hash is compared to the original hardware hash, seven or more points must match for the two hardware hashes to be considered in tolerance. If the network card is the same, only four additional features must match, because the network card is worth three, for a total of seven. If the network card is not the same, seven characteristics other than the network card must be the same.

  If a component is changed one day, and then another change is done the next day, two changes are counted. The changes are cumulative. However, if a user is asked to reactivate, the hardware profile is reset to the new configuration.

  Even if it's embarrassing, if you are in the guidelines of the EULA, reactivation on the same computer can be performed as many times as necessary.

  Please see the following link for more details about the activation process.

  http://www.Microsoft.com/Windows/Windows-Vista/quick-start/activation-FAQ.aspx

  <><><><><><><><><><><><>

  Please report your results so that we can help you. Please use the community support for Microsoft Vista.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems when trying to access the Internet using the connection to the network wiressless

  Original title: via a wireless router problem.

  I have a problem of signing on the internet through a Linksys WRT54G2V1 wireless router model. I use Windows Vista Service Pack 2. When I start my computer, it is not the sign on the internet, even if it is connected to the wireless router. After I unplug the router for 20 seconds and then plug it in again, my computer will sign it on the internet. In the meantime, my wife's computer has no problem signing on the internet via the wireless router. What should I do to fix my sign on the problem?

  Hello

  
  Did you make any changes before the show?
  Method 1:

  You can see the following link.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  
  Method 2:
  You can try to disable temporary Windows Firewall and check. Check out the following link.
  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  NOTE: turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  Method 3:
  You can try resetting the TCP/IP stack.
  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions yourself.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
   
  See also:
  You can follow the steps mentioned in the link.
  Network adapter problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  It will be useful.

• What wireless adapter drivers should I download for G71-343US? Windows 7

  I have a laptop hp G71-343US and use windows 7.

  After deleting some unused programs, I lost my wireless network card drivers. 'No available networks', my Device Manager shows a unique icon, which should be used with a cable.

  What wireless adapter I need to download to be able to connect to my home wireless network, once again?

  Thanks for your help,

  Elke

  Hello

  You have a few options in my opinion please find the steps below may help you solve the problem.

  1) click Start in the search box type Recovery Manager, click it then select Yes on the user access control, then select I need immediate help and then select driver and recuperation recovery of an application, and select the Wireless driver and install it.

  (2) try doding of restoring a system to the date where unit was working fine.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• Using the connection for easy connection descriptor

  Hello
  I'm new here. We change a MySQL to Oracle server. I need help for my NET access to Oracle application. I tried to connect to the server, but the connection failed. Here my code for MySQL (ODBC connection)
  
  ' Connection MYODBC 3.51 string
  Dim MyConString As String = "DRIVER = {MySQL ODBC 3.51 Driver};" & _
  "SERVER = 10.177.224.53;" & _
  "DATABASE = result;" & _
  "USER = 1234;" & _
  "PASSWORD = xxx;" & _
  "OPTION = 2;"
  
  Dim adapter as OdbcDataAdapter
  
  Try
  
  adapter = New OdbcDataAdapter (strSQL, MyConString)
  adapter. MissingMappingAction = MissingMappingAction.Passthrough
  adapter. MissingSchemaAction = MissingSchemaAction.AddWithKey
  
  
  This method works great. Can eveyone show me how to make an easy connection with ODP.NET using a simple connection string wiithout tnsnames.ora according to this document:
  Source = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = MyHost)(PORT=MyPort))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = MyOracleSID))) of data; User Id = myUsername; Password = myPassword;
  
  ?? where is the DATA base (= 'result')
  
  I have the b28844.pdf document and copy the following code:
  
  Conn. ConnectionString = "name of user =" + userID.Text & _
  "; Password ="+ password. Text & _
  « ; Data Source ="+ dataSource.Text
  Conn. Open()
  
  What is the content of dataSource.Text?
  
  who is Ellen

  902645 wrote:
  I'm new here. We change a MySQL to Oracle server. I need help for my NET access to Oracle application. I tried to connect to the server, but the connection failed. Here my code for MySQL (ODBC connection)

  Connection failed how? What was the exact error message?

  "DATABASE = result;" & _

  Oracle database! = MySQL.

  In Oracle, you have a database and it can contain several diagrams (which are mapped 1:1 for the connection of the user). The concept of a "database" is different from the terminology of MySQL.

  The 'default' diagram depends on user name used in connection for example user = TEST involves TEST schema objects.
  If you want to access several patterns, specify an identifier pointed as in select * from schemaname.objectname. (assuming that the user has the necessary permissions).

  Can eveyone show me how to make an easy connection with ODP.NET using a simple connection string wiithout tnsnames.ora according to this document:

  Simple (Easy connect) connection string format is:

  HostName: Port / service

  data source for example = MyHost:MyPort / MyOracleService (not the SID instead since 8i Service registered listener name services - see lsnrctl stat command output side Server)

  Published by: orafad on December 19, 2011 12:32

  Published by: orafad on December 19, 2011 12:33

• What is required to use a headset Logitech h110 with a Mac Mini?

  I plugged in two different Logitech h110 helmets to the Mac mini. One of them is brand new from its packaging.

  Nor, we record the entry levels of the microphone of the headset, as indicated on the screen Preferences sound.

  Other applications are also any audio input either.

  What is required to use a headset Logitech h110 with a Mac Mini?

  http://www.Amazon.com/STARTech-com-headsets-separate-headphone-microphone/DP/B00 4SP0WAQ/ref = pd_bxgy_147_img_2? ie = UTF8 & refRID = 0J342KYWVKRQFFXA4WPY

  It will also depend on the model of your MacMini, info provided you no, only the most recent models can use this type of adapter.

  You have purchased helmets designed for s PC not Mac.

• Linksys AE2500 is compatible with Sony adapter to use on a DVD disc Blu - ray BDP-S370 player?

  Linksys AE2500 is compatible with the Sony adapter for use on an of DVD disc Blu - ray player BDP-S370 to connect to a wireless network?

  Hello Jaime,

  Only the UWA-BR100 wireless LAN adapter is supported for use with the Sony BDP-S370 Blu - ray disc drive to connect to a wireless network. Sony has tested the adapter LAN USB UWA BR100 and it is guaranteed to work with the BD player. Adapter USB LAN wireless from other manufacturers may work, but Sony has not tested the and as a result, operations are not guaranteed.

  If my post answered your question, please mark it as an "accepted Solution".