What IP SLA probe for LDAP and Radius

Hello

I would use IP SLA probes to monitor client access to broadband.

We want to deploy some routers of shadow on some Exchange sites to measure the customer experience.

We are looking to create a DNS probe. We would like to test authentication.

I think running the port of probe UDP 1812 for RADIUS.

I don't know if that's enough.

What is LDAP?

Anyone would have done a similar implementation?

Thank you

Rgds

Abdel

There is no specific operations to test the Radius and LDAP. There is nothing you can do as the udpEcho operation will not work with the port of RADIUS for the RADIUS. You must configure the collector to send requests to the UDP echo (port 7) port or equipment of machine IP SLA (see http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_echo_ps6441_TSD_Products_Configuration_Guide_Chapter.html ).

However, for LDAP, you can configure a collector of generic TCP connection which will at least give you data connection latency. The collector must connect to tcp/389 (assuming the plaintext LDAP) or tcp/636 for ldaps.

Tags: Cisco Security

Similar Questions

  • An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?

    An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?

    This issue has been resolved with the article below

    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2015181

  • What are these files for ACCFinderBundleLoader_64 and ACCFinderBundleLoader_32? They appear in my dashboard!

    What are these files for ACCFinderBundleLoader_64 and ACCFinderBundleLoader_32? They appear in my dashboard!

    I think to delete because they bother me when they have a place in the Launchpad among my applications.

    Hi all!

    I just talk to Adobe about this and they have me remove this item.

    To do this, you must go to the finder, search ACCFinderBundleLoader_64, and then drag it to the trash.

    Then delete the trash.

    It worked for me.

  • What is the procedure for removal and installation from a CD ROM Drive?

    I have a Compaq Presario 8000Z / 8QSXE1 PC. I just ordered a new CD ROM drive and expect to receive at the start of next week. I already know how to open my case, I just bought the antistatic carpet from Radio Shack with the hand strap to dissipate any static buildup on me and the PC. I got compressed air ready to clean any dust and the debri.

    But now if someone knows how to remove the old drive and install the new drive I as always greatly appreciate this info. What tools do I need etc will also be useful for this task.

    Thank you

    drake68

    Hi Drake,

    Review these "how-to" HP articles.  To remove and replace process should take less than 30 minutes.

  • What is the update for CS3 and 3.5? I want it?

    Dear community. I had to reinstall CS3. The software disks got ejected from my iMac, I thought the software was defective. I went looking for a replacement.

    I found the upgrade of Version CS3.5, so I bought it for $221,00 or more. Then it dawned on me that the optical drive in my iMac can be found at fault. Then I bought an external disk drive. The Adobe software is perfect to CS. What would this update 3.5 for me? I could return it.

    The update adds a few features in some programs, especially InDesign and combines all the previous bugfix updates in a new installer "clean". Also, it upgrades the version of Acrobat.

    Mylenium

  • I was able to change the colors of fonts in an email, but now I can't. What is the reason for this and how can I solve the problem, please?

    I've updated for Mozilla Thunderbird v 24.4.0 and now the colors of fonts do not work.

    This bug was supposed to be fixed at 24.4, I why I am telling you your test so.
    See https://support.mozilla.org/en-US/questions/992366?

    could you please check again that you use 24.4.

    Also restart form Thunderbird Help menu (Alt + H) with Add-ons disabled, just to make sure that he is not an unhappy interaction with Add-ons or themes.

  • ISE of Cisco protocols for ldap and Windows wireless client

    Only protocols below are supported by ise in combination with ldap identity sources.

    EAP - GTC, PAP, EAP - TLS, PEAP-TLS.

    Peripheral Mac OS appear to be able to use these, but Windows users seem to have problems. How windows users must connect with ise that only uses the ldap Protocol?

    You can use the anyconnect Network Access Manager. Just out of curiosity why ldap on join ise to AD?

    Sent by Cisco Support technique Android app

  • Double authentication using LDAP and RSA

    I would use LDAP and RSA (double authentication) for my SSL VPN clients.  Can I authenticated users if my logon page requires users to enter a second username.  If I have the configuration so that they have to enter their username once, no authentication attempt is passed on to the authentication servers.  I'm under debug on LDAP and RADIUS (for RSA), which is what I know that authentication is never over if they are to enter their user name once on the login page.

    If I don't specify "use-primary-username" at the end of the 'secondary-authentication-server-group' command, users must enter their username twice and the authentication is successful.

    Does anyone know how to configure the ASA so that they have to enter their username once while using the LDAP (as principal) and RSA (RADIUS) (secondary)?

    Thanks in advance.

    Matt

    Hi Matt,

    I just tried on 8.3 (2) and it works as expected. I suspect that you are running in this bug:

    CSCte66568    Double authentication broken in 8.2.2 during use-primary-username is CONF.

    If you are running 8.2, upgrade to 8.2 (3) and you shoud be fine.

    HTH

    Herbert

  • UCS LDAP and Native authentication

    Hello

    We put the Native authentication for LDAP and UCS Manager connection to LDAP as well. We are able to connect to GUI & SSH using the LDAP account. But can not connect on the GUI using the local account (admin).

    If I change the Native authentication at the local level, we can connect to GUI via local account (admin), but can not connect to SSH via LDAP account.

    Missing something?

    Please let me know.

    / Rags

    Hello

    When you have changed the native auth to LDAP and use local account, are you prefixing the local username with the local domain auth?

    * From Linux / MAC machine

    SSH ucs -------@.

    SSH-l ucs -.

    SSH -l ucs -.

    * From client PuTTY

    Connect as: ucs -.

    NOTE the domain name is case-sensitive and must match the name field set up in UCSM.

    Try connecting with the name in domainsername and let us know the result.

    Padma

  • Problem with IKEv2 routes w using PSK and RADIUS

    Hello

    I have a 7 881 + (15.2 (4) M2) connected to a 1001 ASR (03.07.01.S) via the Internet. The goal is to set up DVTI on the ASR, use FlexVPN on the CPE and inject crypto IKEv2 itineraries in the VRF on the EP for subnets protected on the SCE when using pre-shared key for authentication and RADIUS to return the attributes.

    I can get the tunnel works fine, but I can't get the cryptographic routes.

    My configs:

    7 881 + CPE:

    Crypto ikev2 keyring Keychain-CPE

    peer ASR

    address

    pre-shared key abcd

    !

    Profile of crypto ikev2 IKEV2-PROFILE-CPE

    match one address remote identity 255.255.255.255

    identity local fqdn cpe.ipsec.net

    sharing front of remote authentication

    sharing of local meadow of authentication

    Keyring key chain local-CPE

    DPD 30 2 periodic

    !

    Crypto ipsec transform-set esp - TFS-AES256-SHA-HMAC-aes 256 esp-sha-hmac

    tunnel mode

    !

    by default the crypto ipsec profile

    game of transformation-TFS-AES256-SHA-HMAC

    profile ikev2 IKEV2-PROFILE-CPE

    !

    Crypto ikev2 client flexvpn FLEX

    Peer 1

    Customer inside Loopback0

    customer connect Tunnel0

    !

    interface Loopback0

    IP 255.255.255.255

    !

    interface Tunnel0

    the negotiated IP address

    source of tunnel Dialer2

    ipv4 ipsec tunnel mode

    dynamic tunnel destination

    tunnel protection ipsec default profile

    PE OF THE ASR:

    Authorization group to the network IPSEC-AUTHOR of AAA AAA-GROUP-IPSEC-RADIUS

    !

    Crypto ikev2 60 2 dpd periodicals

    !

    Profile of crypto ikev2 IKEV2-PROFILE-ASR

    corresponds to fvrf FVRF

    match identity fqdn remote domain ipsec.net

    sharing front of remote authentication

    sharing of local meadow of authentication

    Keyring aaa IPSEC-AUTHOR

    AAA authorization user psk IPSEC-AUTHOR list

    virtual-model 1

    !

    Crypto ipsec transform-set esp - TFS-AES256-SHA-HMAC-aes 256 esp-sha-hmac

    tunnel mode

    !

    by default the crypto ipsec profile

    game of transformation-TFS-AES256-SHA-HMAC

    the value of RADU ikev2-profile

    answering machine only

    !

    type of interface virtual-Template1 tunnel

    no ip address

    source of tunnel GigabitEthernet0/0/3

    ipv4 ipsec tunnel mode

    tunnel vrf FVRF

    tunnel protection ipsec default profile

    Definition of RADIUS user name:

    CPE. IPSec.net

    Tunnel-Password = abcd,

    Framed-IP-Address = 172.16.0.254,

    Box-IP-Netmask = 255.255.255.254,

    Cisco-avpair = "ip:interface - config = vrf forwarding test",

    Cisco-avpair = "" ip:interface - config = address ip 172.16.0.255 255.255.255.254 ","

    Cisco-avpair = 'ipsec:route - value = interface',

    Cisco-avpair = "ipsec:route - value prefix = 32",

    Cisco-avpair = "ipsec:route - accept = any"

    The tunnel interface is coming on the CPE, the virtual access interface is implemented on the ASR. I could use BGP to Exchange routing between EP and CPE information, but I want to use IKE.

    I think the problem is because I don't know how to call a permission policy IKEv2 on PBS (in which I could set up a list of access for the ). But on the CPE, I have the following limitations:

    I want to use PSK for authentication, but no RADIUS server is available. So, the only other option for PSK authentication is a Keyring set locally, as there is no way to use a user name defined locally (local authentication) with a set of keys.

    So how can I trigger an IKEv2 authorization under the profile of IKEv2 policy?

    CPE (config-ikev2-profile) list of psk #aaa user authorization?

    The WORD AAA list name

    If I set a local aaa authorization list, then all authentication fails:

    AAA authorization network default local

    Profile of crypto ikev2 IKEV2-PROFILE-CPE

    by default the AAA user psk authorization list

    * 15:52:27.042 Dec 20 UTC: IKEV2-3-NEG_ABORT %: negotiation failed due to the ERROR: exchange Auth failed

    And there is no way to trigger that the authorization policy if I do not set the command above, is not it? I tried to modify the authorization policy by default with access list, but it is not taken into account.

    If I use a card with an access-list and IKEv2 encryption, I can get directions crypto on the ASR. But I want to use FlexVPN on the CPE.

    Is there a way to do this?

    Also the IOS configuration guides are not too useful

    Thank you

    Radu

    . "09:12:42.299 Dec 21 UTC: IKEv2:IKEv2 local AAA asks author ' 87.84.214.31 '.

    . "09:12:42.299 Dec 21 UTC: IKEv2:IKEv2 local AAA - political ' 87.84.214.31 ' does not exist.

    . 09:12:42.299 Dec 21 UTC: authorization IKEv2:IKEv2 162 error

    Not sure how resembles your config, but here it says that it cannot find

    ikev2 crypto 87.84.214.31 permission policy

    <...>

    If it is configured?

  • What is the difference between flash and flash builder professional?

    I want to create simple 2D flash games for computers.

    What is the best for this, and what are the advantages and disadvantages of each?

    They both use actionscript 3?

    -Thank you

    they use as3 and have the same script function.

    Flash offers more artistic freedom / drawing while flash builder has more components pre-integrated.

  • "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

    "Can not open AsIO.sys (2)" I get this message when I log in after a reboot.  I have search for the file, but can't find it with the research or the command prompt.  What do do in this file, and can be created and put into the appropriate folder?

    Hi Jack,

    This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

    André
    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • What is a good VPN for Mac and iOS client?

    I want to identify a strong product of VPN for Mac and iOS.  I want something that is easy to install and maintain, and it's effective.

    Thank you

    This depends a lot on what you're trying to accomplish. Can elaborate you on why you think you need?

  • I forgot my password for apple and have permission to stage the 2 and broken my old phone and do not have the same number of what I can do my account is already waiting to be reset, but it takes apple long to to deal with the what else is there to do?

    I forgot my password for apple and have permission to stage the 2 and broken my old phone and do not have the same number of what I can do my account is already waiting to be reset, but it takes apple long to to deal with the what else is there to do?

    You know the e-mail password what do you use? I lost over $ 30 on my old Apple ID because I couldn't get into the email and apple would not transfer my money to my new account.

  • What is the difference between the Firefox for android and Firefox beta

    I noticed in the store of Google play there are two applications of Firefox. What is the center of the difference between the two Firefox browser for android and Firefox beta.

    Firefox for android is just the regular and stable browser that is recommended. Beta of Firefox for android is the next version of firefox that is in beta (test yet, but almost ready) step and is not ready for an official release because he has a few folds and fixes to do. But firefox for android beta has some of the features the most recent Firefox should be released soon as an official version.

    The current version of firefox for android is 34.01.
    The current version of firefox for android beta is 35.0.

Maybe you are looking for