What is a simple way to explain a shift register?

I'm having a technical assessment tomorrow and I need to know what would be the best way to describe a shift register.

Hi peanut,.

a shift register passes a value of an iteration of a loop to the other...

Tags: NI Software

Similar Questions

  • I want to delete one of the tools of my toolbar and the instuctions taking me to 'add ons' is a non-starter, so what's the simple way to do this?

    I fell once trial-error on how easy peasy to do this. All my research I continue to take in complex 'solutions' which are not cut.

    I do not know if you have a right-click of the mouse, but using either make a right or Mac, Ctrl click (on-click) on a toolbar button or the command should give you short a context menu with the option to remove from the toolbar.

    WARNING: Cannot delete the elements incorporated into the address bar without removing the entire address bar.

    If something is wrong:

    • Some add-ons keep forcing their buttons on the bar. Annoying, but I don't know of a way to block to do.

    Success?

  • What is a simple way to get the answers to the questions? not good at all this stuff and post the answer.

    asked about windows fax and picture viewer.  had 2 responses, but can not find how to see them.  am not good at all this back.

    asked about windows fax and picture viewer.  had 2 responses, but can not find how to see them.  am not good at all this back.

    When someone posts a response to a question you asked, you should get an email notification.  Click on the link in the notification email and your browser should go directly to your question and its answer.

    You can also connect to Microsoft Answers (http://answers.microsoft.com/en-us) and click on your username in the upper right, and then click on 'My issues'.

    Unfortunately, "all this back" is the only way to get help on the Internet.  Until feel you more comfortable with this process, I suggest that you look at your community resources.  Often, your local public library will help computer available, and if not, they will more than likely be able to go to a place that does.

    If you need repair service, I suggest that you go not to a type of place BigBoxStore or geeksquad, but look for a local computer repairer deemed.

  • What is the best and most simple way audio of side chain with the help of hearing?

    I use hearing to record a radio show.

    Essentially, I have a long piece of music and want to that music whenever we talk about duck (tell a bad joke).

    What is the best way to achieve this?

    Any help would be welcome.

    See you soon,.

    Tom

    Many tutorials available online. One of the best of Jason Levine of the own hearing here:

    New Short & Suite Tutorial: Sidechaining in hearing CS6 | BoodahJooMusic.com

  • What is the best way (and possible) to remix a song mixed

    GarageBand 10.1.1

    10.11.4 OS

    Mac Book Pro

    16G RAM

    Hobby old YR 68 recording guy/try to leave a legacy

    What is the best way (and possible) to remix a song mixed

    I have a song that is most often improvised, I was told that his cool, however, re-registration is not possible.

    After reading a lot on the mixture, I now hear where the uneducated choice and errors that I made which explains the sound "not as good" that the song is.

    Before I just jump in and try to undo the settings on the tracks (one is DRUMMER) to return to the raw track before effects/eq/compression ect. is is possible to do?  Opens the unfavorable mix, rename it, save it and just go to work and cancel or disable 'things '.

    The basis of the lean mixture comes even to the root where I 'hot' securities, (orange and red)

    I guess by now you understand my question and I am open to a favorable opinion.

    Thanks in advance for your help.

    jojoguiitar_mn_usa

    I read this question so many times and I can't seem to figure out exactly what you're asking.  You just ask if you can go back in your GarageBand project and edit your tracks again?  Of course, you can, why not you?

  • Satellite A200 - 1 M 5: what is the best way to extend our battery

    Hi there everyone,

    I hope you are all good, I kindly need to know what is the best way by which we can extend the battery from our PC, I had a friend who apparently frustrated because his laptop battery is almost dead then that PC disconnected electricity; It gives him only five minutes and the beep starts.

    I think she always used his laptop plugged into the electricity, not frequent unloading / loading the battery and yet, I really appreciate it if you guys out there (blessed) could help me maintain my and his of (she bought a new battery lol) batteries.

    Note: My Satellite A200 - 1 M 5 gives me 2.45 minutes after 4 months and I'm happy with that, I turn on my laptop disconnected to power (releases) often, but I feel that I can't explain or help others to look after your laptop battery.
    Thanks a million in advance

    Why we can not find the information seen on the Toshiba site maintenance?
    Maybe we didn't get!

    Hello

    I think you're right research you didn t on the Toshiba page quite long ;)

    I have consulted the European Toshiba support page and selected in the troubleshooting category option-> Solutions to common problems.

    There I found the battery category, and then I found this article:

    * + How to configure my computer for optimal use of battery? + *
    http://www.toshiba-tro.de/KB0/HTD5400Z60005R01.htm

    It looks like an old FAQ document in any case the fact is that all batteries lose own performance after several times several years ago, it is advisable to remove the battery from the laptop to extend the battery life. This is not necessary with the new battery and generation of laptops.

    However, many people remove the battery if the laptop works on sector (power adapter connected) This prevents the battery of standing of the charge and discharge.

  • Y at - it a simple way to update my old DRM protected songs to non - DRM?

    I have about 500 songs protected with DRM in my iTunes library that I would like to upgrade. I have considered various options. I like simple. I don't want Apple music and the library of Cloud, and I don't want iTunes game. I don't want to make CD and load it into iTunes. I don't want to buy music elsewhere as I already bought at iTunes. I looked at various converters for Mac DRM, and they look like the best option for now. Before you buy one of these, I missed something. I read in various allows, at the same time, you could upgrade all your DRM songs to non - DRM iTunes somehow, but can not know that one. Is there a simple way to solve this problem? Devices just Apple and software will play those songs.

    Hello

    The easiest way to upgrade your iTunes Store purchases, is to subscribe to iTunes game. Your iTunes library is analyzed to determine what can be improved. Previous purchases that can be upgraded will be either the iCloud 'Bought' or 'Matching' State. Then, you select Delete DOWNLOAD, see download icon. If the tracks is updated you will see change the transmission speed of 128 to 256 Kbps. Then, you select make available offline to download the new version. Be aware that a small number of titles isn't expandable.

    JIm

  • What is the best way to always increment at index 0 only for an array of multiple elements?

    The principle is to complete a worksheet of left right in the same line but the increment of the column letter only (IE - B4 and C4 etc.). Herewith, I adapted an existing example VI that works for an array of 2 elements (ie - B4) but does not work for a 3-element array (ie - B40, B50 becomes). Keeping simple, what is the best way easier to modify my existing code to always check that the size of the table and the index automatically return to 0 to correctly increment the first letter only (IE - B) and not the number (IE - 4)?

    Thank you!

    Barry

    Instead of 'index automatically to zero', why not just make a zero instead of the size of table manipulation-1-1?

    Of course it will all fall apart once you get to column Z.

    Also look into the Board of Excel.   Do not post question.  This is just a link to the other discussions related to Excel.  Some of them might give you ideas how to manipulate your cell references.

  • INTERFACE design - what is the best way to allow the user to define a kind of infusion at various times (non-periodic)?

    I want to allow the user to specify a curve like this:

    Such as some under - VI shows the A2 value when a variable of time is between R1, A1 when the time variable is between A2 and A3 when time is in the range A3.

    My design looks like this:

    With the error checking that looks like this:

    My question is, is the approach of the table according to optimal? Otherwise, how could combat this?

    I think I can summarize the conversation on this point as a response to the original question (what is the best way...) -to start writing code, to think about what you want to accomplish and write it down (otherwise known as 'Write the first Documentation').  One of the points of a good User Interface is that it is not allow users to "stupid mistakes" - it leads the user "by hand", limiting the entries to the "legal values" and demanding that the entries be made logically.

    If you were going to have a list of Infusions to enter, it is therefore logical to decide or not to enter into time intervals (which are always > 0) or order the times (which, logically) are still growing.  You can (and should) decide that you (or you may have a control that allows the user decide, but maybe it's too flexible) and then apply your "rules".

    Let's say you've decided on "Intervals" (which seems to me to be more User Friendly).  After the user has entered the intervals (and you've provided a nice plot of perfusion vs. time), pouvez allow you the user to an interval of 'split', 'Delete' an interval, or "Edit the Infusion" interval, or you can decide to have a choice more simple "accept or start again" - If you have only a few intervals, the last would be the simplest (and therefore best) design choice.

    Spend more time thinking before coding usually pays Big dividends!

    (Speaking of sad experience) Bob Schor

  • Vista / 7 on the computer; What is the best way to save both?

    Vista 64 (c) / 7 64 (G :) external hard drive (f) and (h).)  Backup of Vista (c) to (f) / 7 (g) to (h). Y at - it a simpler way

    to back up the two systems to sametime? What system should make backups for both drives? 7 has the image of the system on (h).

    Should I format external drive to a single space? Keep all backups to gether a literate player or two?

    Hi Mark,

    You can refer to the link provided below for backup and restore of Windows 7 and Windows Vista operating system.

    http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  • What is a simple but effective update to the XPS 8500 video card? (Computer complete Newb)

    What is a simple but effective update to the XPS 8500 video card? (Computer complete Newb)


    Hello Dell Community. I read through the sticky XPS compatibility and some discussions on upgrading video cards. However, I couldn't find something that fits my needs. If you all can help me with this, would be great!

    Characteristics of the computer:

    • Dell Xps 8500
    • Intel Core i7-3770 CPU @ 3.40 GHZ
    • 16 GB of Ram
    • 64-bit operating system
    • AMD Radeon HD 7570

    Needs:

    • Run newer games of 2014/2015 without lag on medium to high heat (GTA V)
    • Relatively easy to install (remove some screws and paste the video card in and voila!)
    • No need to upgrade the power supply

    Budget is $ 200-250:

    • Obviously the lower the better and if need be, the budget is flexible. Depends on if the gain is important for the payment of the sum.

    Look forward to your answers!

    Thank you

    Richard

    A card that I know works is $200 would be

    EVGA GeForce GTX 960 SuperSC ACX 2.0 + 2GB GDDR5 128 bit 02 G-P4-2966-KR that it comes with a 2 X 6 pin cable 8 pin Y so the stock power should be good.

    more than 2 GB will not improve the map and it will increase the price.

    http://www.Newegg.com/product/product.aspx?item=N82E16814487091

    http://www.Amazon.com/EVGA-GeForce-dual-link-graphics-02G-P4-2966-KR/DP/B00SC6HAS4

    Don't get me wrong although it won't make a video full screen 4K.

    To 3-way SLI GTX 980 and a power of 1500W power supply in an area 51 triad.

  • Any transfer on a drive hard new - what is the best way?

    Here's a question simple and straightforward, I hope. I currently have two internal hard drives:

    • C (IDE): OS (Win7), programs
    • F (about three times larger than C, faster, SATA): for most of the multimedia stuff

    (And some external and a dvd burner, which should not be relevant to this question.)

    I ordered a new hard drive, which will take over old job of the F drive. Once I have install and F empty on it, I want to move everything that is currently on C for which is now F and the new C drive I start and run Windows from. (C would also get a new drive letter and would only be used for backup purposes).

    I much prefer this without having to reinstall Windows and all my other programs, and without investing in expensive software of type Ghost I would probably use only once every two years or more. I also prefer not to have to partition F, although I'll do it if necessary.

    What is the best way to do it?

    Windows 7 image and move it to the new hard drive

    The only way to avoid reinstalling programs is in the image of the player. Connect the new drive as a slave (if IDE), then partition the new drive, so it has two partitions (or more if you want) - the last partition being slightly larger, then the amount of data on your current hard drive. Also, make sure that the partition you are moving that Windows 7 is greater, then the current partition is.

    Make now a picture of your current hard drive with either programs below and save it to the last partition on your new drive. If you have the recovery of 100MB partition do not forget to include that. Then restore the image of the partition that you want Windows 7 installed-you put in place the same as long as your current drive, and you may need to remove/change the partitions that you have done.

    Both programs are offered free of charge:

    Reflect disk imaging:
    http://www.Macrium.com/reflectfree.asp

    Paragon Backup & Recovery Free Edition:
    http://www.Paragon-Software.com/home/DB-Express/download.html

    Remove the old hard drive and see if a new start, if it is not:

    Try to repair the Installation of Windows 7

    1. Insert the DVD of Windows 7 and restart your computer
    2 boot from the DVD.
    3. choose your language and click Next.
    4. click on repair your computer, select the operating system you want to repair.
    5. click on the link to repair list system in the System Recovery Options recovery tools.

    More information and a how to guide:
    http://pcsupport.about.com/od/toolsofthetrade/SS/Windows-7-startup-repair.htm

    If this does not solve it:

    1. Insert the DVD of Windows 7 and restart your computer
    2 boot from the DVD. If you are prompted, press any key to start Windows from the installation disc.
    3. choose your language and click Next.
    4. click on repair your computer, select the operating system you want to repair.
    5. Select command prompt and try the following commands (one command might work, or you may need to use several commands according to the exact problem):
     
    Bootrec /fixMBR
    Bootrec /fixBoot
    Bootrec /rebuildBCD

    Note: there is a space before the /.

    Space - increase free hard drive space

    Before taking the free picture of space hard drive if you want.
    The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

    1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
    2. in the drives list, click the drive you want to clean, and then click OK.
    3. on the Disk Cleanup tab, select the types of files to delete.
    Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
    4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

    Reduce the amount of space allocated to system restore.

    1. start--> panel--> system and safety--> system
    2. then click on the "System Protection" link located at the top left.
    3. in "system properties? window, click the tab "System Protection".
    4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
    5. now, click the "Configure" button to change the settings to restore "disk space".
    6. move the slider to the left to reduce the amount of disk space, that System Protection can use.
    7. click "Apply" and then the "OK" button after setting the disk space.

    Questions about installing Windows 7?
    FAQ - Frequently Asked Questions from Installation Windows 7 & responses

  • What is the "best way" to see all the 'hooks' that affect the database?

    Hi all

    I'm responsible for exporting all schemas using the data pump and then re - import the scehmas, yet once so we can reorganize the real table spaces.

    I know that this can be done using grid 12 c, but I'm not sure I want to use this feature for this task.

    Anyone who has used the feature of grids to 'keep the tables' and then re - organize them while they are still online?

    I'll have to finally make it to the PROD database and I am concerned about the "break" out of jobs, items, ect, ect.

    What is the "best way" to do a proper verification of all database objects and or work, that the export/import might pipe upward?

    As I did for example, a simple count on all objects and of course excludes "SYS and SYSTEM" and the County was in close 60 000 objects.

    How do I know all 'hooks' that are inside the database? What is the way that do you?

    Thank you

    Lady Allora.

    Hi, Justin.

    I think that's what I'm going the way of...

    Select os_username, username, OWNER, dba_audit_trail SQL_TEXT

    where rownum<>

    where username <> 'SYSTEM '.

    and also have different variations all asking questions them the same point of view...

    Modes of verification do you find useful?

    Also I'm using something like this as well.

    Select "check standard", sessionid,

    proxy_sessionid statementid, entryid, extended_timestamp, global_uid,

    username, client_id, null, os_username, userhost, os_process, terminal,

    instance_number, owner, obj_name, null, new_owner,

    new_name, action, action_name, audit_option, transactionid, returncode,

    SNA, comment_text, sql_bind, sql_text,

    obj_privilege, sys_privilege, admin_option, dealer, priv_used,.

    ses_actions, logoff_time, logoff_lread, logoff_pread, logoff_lwrite,

    logoff_dlock, session_cpu

    Of

    dba_audit_trail

    where rownum<>

    order extended_timestamp;

    Thank you

    Lady Allora.

  • What is the best way to change the size of a design?

    I have an announcement in A4 format and need to change it to a bunch of different sizes, what is the best way to do it? Just making it smaller does not work because the text that it becomes small to read.

    Erica Gamet gave a great presentation on this topic (which creates several sizes of an ad in InDesign) to my user group earlier this year. There are two messages for Erica who explains how to put in place:

    http://creativepro.com/understanding-liquid-layouts-part-one/

    http://creativepro.com/understanding-liquid-layouts-part-two/

  • How to convert the compound path to simple way barred?

    New animation SVG here and you would appreciate the help.

    I exported an SVG graphic logo to facilitate the animation of lines in the logo. In short, I'm trying to make these lines 'draw' sequentially.

    After you import the SVG object in the browser, I realize the path data to describe complex shapes, rather than a simple path with a vascular accident brain. For example, straight lines appear as a path around the outside edge of the line, a rectangle. See the part of the image below showing the anchor around the edge of the line.

    While I could very well be wrong, it seems that I need to make these lines in the draw of logo is given simple way, with the width of the line determined by a stroke. Does anyone know how I could convert/export what I need to give me what I need?

    Thank you!

    Joseph,

    Simple/no tracks transparent FO, you can do the following:

    1) switch from fill to line in the Toolbox (in you first picture you have completed and no stroke);

    (2) ShiftClick each of the segments of both ends with the direct Selection tool and then tap on delete.

    This will give you two simple traces to the mixture;

    (3) object > mix > blend Options, not specified the value 1, then object > mix > do, then object > mix > Expand, then Ctrl / Cmd + Shift + group to ungroup, and then delete the traces of origin;

    (3) select the new path and him giving the desired weight of stroke (half of the difference in width for traces of origin).

    And Willi comments on using JPEG.

Maybe you are looking for