What is a typical level of noise on a signal 4-20 my?

Similar Questions

• How do I know what version (update / output level) version 6 has been applied to my system?

  Question
  How do I know what version (update / output level) version 6 has been applied to my system? I applied several different publication levels to version 6 of FF, but all about feature tells me is Version 6.0. No version! This seems to be a change in the updates in the way which are managed. What is a distortion because of the speed in which you push updates and what's new?
  contact me if you need something more

  e-mail address removed

  For those who are in need of a photo/screenshot, see attachment below. Right click on the image below, choose "Open in New Tab", click on the image to open in the new tab to zoom in and enlarge the image.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Hello, I would like to know what the ideal audio levels (gain/normalize) levels should be for my project. It will be broadcast on television. I think that the gain should be set to-12? But I'm not sure what should be the vertices. Thank you!

  Hello, I would like to know what the ideal audio levels (gain/normalize) levels should be for my project. It will be broadcast on television. I think that the gain should be set to-12? But I'm not sure what should be the vertices. Thank you!

  And look also at: Conform to broadcast standards, volume limits. Adobe Audition CC tutorials

• What is the last level of patch bundle for x 3-2 exadata machine? How to find the doc?

  We have a x 3-2 exadata machine. I have a question: what is the last level of patch bundle for x 3-2 exadata machine? How to find the doc?

  Thanks in advance.

  Check note id 888828.1

  It has all the information you need.

• What is the security level of a signing of pdf from Adobe? How is difficult to break? It is similar to a md5?

  What is the security level of a signing of pdf from Adobe? How is difficult to break? It is similar to a md5?

  Software can crack the document.

• What is the difference between levels 1 to 4 of the performance monitoring? What is the default level?

  What is the difference between levels 1 to 4 of the performance monitoring? What is the default level?

  Collection and levels of collection intervals are two things that are used to monitor and collect statistics of performance for entities.

  Research in detail what intervals of Collection and collection levels mean:

  Collection intervals determine the duration for which the statistics are gathered. VirtualCenter currently has four intervals of collection: day, week, month and year.

  Every interval between two collections has a default collection level that determines how the counters are used when collecting statistics. Default collection-level is set to 1 (because the minimum number of counters). This level is configurable and can be set from 1 to 4.

  For more details on the intervals of the collection and the collection level (with respect to the measurements taken at each level), please see the "Collecting statistics" section, page 281 base System Administration Guide.

  http://www.VMware.com/PDF/vi3_35/esx_3/R35/vi3_35_25_admin_guide.PDF

  Hope that the information above will clarify your doubts regarding the level of default collection and what they mean.

• What is needed to connect to a Wi - Fi signal with a wired product?

  We use Magic Jack Plus connected via an Ethernet CAT5 cable to our DSL router to our phone calls. We are heading a Condo with a Wi - Fi avialable in each unit. What product do we need to connect to that signal and will allow us to plug the Magic Jack Plus via Ethernet Cat5?

  I think what you need is a wireless bridge. The wireless bridge can connect wireless to the WiFi signal in the Condo unit while you can wire your making Magic at one of its ports. You can check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=689d24b5a2024ca4bfea0bffadb30ceb_Getting_to_Know_L...

• Satellite L670 19th low level background noise

  Hello

  Recently purchsed a L670, it lowered Windows 7 for Xp and now find that there is a very low noise level issued with headphones which seems to be associated with the background of hard drive operation, can someone suggest how I can fix this problem its driving me crazy!
  Thank you

  Hello

  Have you noticed this noise coming from speakers or simply using the headset?

  To be honest it is difficult to say what might cause this
  Perhaps you need to change some settings in sound option
  Decrease the mic and other controls for test purposes...

• What is a typical export time?

  I export a segment of 1 minute of a 1 hour movie and it takes about 10 minutes for export. The file is a MOV file of 11 GB, stored on an external 2 TB USB drive and imported into first. I've set up to export as a 640 X 360 px to 29.97 px film cadence with the other default settings. Using an Imac of two years, 21 inches with 16 GB of memory and a 2.5 GHz Intel Core i5 processor.  A few weeks ago, I reformatted the Mac because it was getting slow.

  Is this typical to take ten minutes to export a movie in 1 minute?

  Is it possible to do it faster?

  Thanks for any help.

  For what interests me, in doing so, just cut the excess of a very long video, QuickTime is much better. He was able to open the file and I was able to copy on the segment I wanted and he re-record in a few seconds. If I need to play with the short file I use the first, but it's nice to have a quick and dirty solution.

• What are the typical Ip addresses for NAT?

  Hi all;

  I recently reinstalled my os x and re-installed fusion. I think that by default, NAT has been fixed and I got an IP address of 172.16.182.2. The bridge was simliar.

  Just for peace of mind, it is typical for the vm nat? (like 192.168.1.1 for routers?) I tried to search for him, but either I turn anything or ambiguous corelations affecting me.

  TIA

  EC

  WRITTEN-2 wrote:

  OK, so the IP 172.16.x.x is a typical, ip internal lan against someone of another IP address via internet? I'm not a networking expert, from the looks of your link, but what I've seen. I wanted to just make sure that it was the default ip of Fusion model for its software NAT. I've never seen before 172.16.x.x and wondered where he came from. I spent in bridged networking and saw my ip linksys familiar (192.168.x.x).

  Yes as the RFC says...

  3. private address space

  Numbers Authority IANA (Internet Assigned) has reserved the

  After three blocks of IP addresses for the private internets:

  10.0.0.0 - 10.255.255.255 (10/8 prefix)

  172.16.0.0 - 172.31.255.255 (172.16/12 prefix)

  192.168.0.0 - 192.168.255.255 (192.168/16 prefix)

  Nothing in these ranges is private and can be used internally.

• Main volume changes of levels with noise levels of the music/videos

  My main volume change volume everytime I listen to what it is video/music with the volume or the softness of music video and possibly up to 0. It's basically alleviate other sounds on my computer but I never manually changed anything and may not know how to solve this return to normal. Help, please!

  Hi Mtyre4269,

  Method 1: Run the fixit available in the link below and check

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/NO_SOUND

  Method 2: Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

  Thanks and greetings
  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• need to know what is in a level

  I want to know if mySwf.swf is loaded in _level2. How is that done?

  Use _level2._url to see what is loaded in _level2.

• What is the important level of certification available in vmware virtualization?

  Hai everybody,

  I want to know the grestest certification available in virtualization vmware, as VCP, VCDX... etc, which are prerequisites for other well want to let me know, it sounds dumb but helps me a lot.

  I thank "U".

  Hello

  Most large available in vmware certification is the VCDX certification.  For more information and prerequisites, you can check this link:

  http://myLearn.VMware.com/mgrReg/plan.cfm?plan=9657&UI=www_cert

  Best regards

  Patricio Cerda

• How can I remove the noise of a signal?

  Hello world

  I need to extract the phase of a signal of 1.5 Hz which has little noise (see attachment files) and MAX I was recording the signal to 500 Hz. I use the filter of Labview tool value 'smoothing' with a factor equal to 3. Could someone tell me if using the right tool for what I want to do? If so, is-3 a correct number of retativaly? Looking at the result of the signal is much better.

  Thank you

  User

  here still to play

  I did not use the ordinary filter, but also more you know about the original signal, the better your filter or fitting can be.

  If you know it should be a sinus (maybe even with a constant frequency) and you want the phase, go with detection of tone or a linear adjustment...

  the median filter is good against the spikes, the filter of SG will make an adjustment of polynomial (original designed for adjustment of Spectra but it's also nice noise with propper settings)

  

  Uups, the pic was taken without median filter...

  If you tell us more about the signal, we could offer best filter.  And keep in mind that most of the filters have an influence on the phase of the signal (late phase/group).

• How can I filter the noise of a signal?

  Hello

  I wonder if someone can point me in the right direction.

  I got the task to analyse the signal from a load cell, measuring vertical efforts on a buoy in the ocean waves. All I have are data files - Earth "calibration" run and a period of measurement of forces in the water. They are both simply traces time force vs. time. Calibration run consisted of hanging weight of the load cell. The problem is that the signal is very noisy, with a +/-10% fluctuation around the average. I don't see any particular model or the periodicity for the noise, but there may be something there.

  As a mechanical engineer, I don't know a lot about the signal processing, but I think there may be techniques to characterize the noise and filter it essentially leave the signal of interest (buoy in the water). I tried to run Fast Fourier Transforms of the calibration and signals live (in MS Excel), but they gave me a huge spread of frequency component, some with puzzlingy large amplitudes. Can anyone suggest alternative approaches or indicate where I have gone wrong?

  Thank you.

  What are the software tools you have at your disposal to achieve this? Using LabVIEW? What is the sampling frequency of your signal?

  The first thing to look for are the functions of filter and start by using a simple low pass filter (for example: Butterworth filter). In view of your signal, you expect the signal to be less than 1 Hz, so put 1 Hz as the crossover frequency. Who should get rid of a lot of noise already.