What is an accident of partirion?

Similar Questions

• What kicked by accident? Parts of the image are gray?

  

  Blue gems got partly gray, this isn't in the history, so what hurt?

  Thanks in advance.

  The grey parts had to be deep blue?

  View - Gamut Warning, perhaps?

  -Christmas

• PC crashes with DBO when downloading a file using Firefox to my iPad

  PC crashes with DBO when downloading a large file via WiFi to my iPad and using AVPlayerHD player on the iPad. There is no report of error in Firefox, just the crash dump Windows 7 due to the accident. Only the combination of Firefox on PC and player AVPlayerHD on iPad causes this crash. Any other combination of PC and iPad works.
  Examples:
  Firefox on PC and iFile on iPad works well.
  Google Chrome on PC works with all programs on iPad.
  Firefoc on PC and player AVPlayerHD on iPad crashes.

  So you get a Blue Screen of Death on your Windows Machine? You have the exact error codes that appear when you get this blue screen?

  Blue screens mean that you have a problem with a driver, hardware or virus on your PC, not with Firefox. I try to launch a program of analysis such as http://www.resplendence.com/whocrashedand see if she can tell you what triggered the accident. Also, make sure that all your drivers are up to date on your computer (especially the graphics driver: update your drivers graphics to use hardware acceleration and WebGL) and check the virus (Troubleshooting Firefox problems caused by malware).

  After that, if you still get the blue screen and crashed does not help, I would say to try to test your RAM with a utility such as http://www.memtest.org/

• HP pavilion ab219tx 15: your PC has encountered a problem and needs to restart

  20 days ago, I bought the HP Pavilion 219tx ab.
  There is a performance in the laptop... shift, which was resolved after updating windows and some drivers.
  
  But yesterday when I was using the laptop all at once a blue screen with a message "your PC came across a problem and must be restart." Windows collects information and will reboot the system. "It took 5 minutes to restart the system, and after that the system worked well.
  
  This problem will occur again. Is the front offset and this crash is a problem hardware or any glitch in windows 10 or something els

  This blue screen is caused by a process in conflict with Windows 10. Something that you have downloaded which is incompatible with Windows 10 perhaps.

  If you download it and run it its log file will tell you what caused the accident.

  http://www.resplendence.com/WhoCrashed

  You want the free version for home use.

• my image folder spontaneously copy images

  Win XP Pro update.  I downloaded pictures to my pictures of LG phone.  I've done it before without incident.  But, this time, after having successfully downloaded photos, virtually all clicks on a given peak spontaneous copy of all the images in my images.  If I tried to remove an image, copies have been made; If I tried to move an image, copies were made.    At last count, there were about 50 copies of the pictures.  Finally, I manually moved the original to a new folder and then deleted the contents of my images.  However, when I tried to delete the folder my pictures, this deletion was rejected with the explanation that a program or someone else was using this folder.  The folder was empty.  I ran antivirus and antimalware analysis; no problems found.  Because of the involuntary copy?  My photos corrupted?  Difficulty?  Thank you.

  (1) if one of your unwanted photos are preceded
  with the copy of... they were created by accidentally
  by dragging the files after the last click and before
  release the mouse button...

  Just to check... Here's how to reproduce the
  the unwanted copying...

  Hold down your CTRL key and select multiple files...

  Place your pointer over the selected group
  (holding the key ctrl) and left click / drag
  the group even just the slightest bit... now
  release the mouse button. (what happens by)
  accident in the quick selection of the files)

  Duplicates 'Copy of xxx.jpg' will appear.

  (2) with the simple click selected... all you need
  the mouse is no longer... no click is needed to
  Select (highlight) a file.

  A mouse on selects a file and a second
  mouse on deselects the file. Not by clicking on
  Mandatory. Simply hold your order or the SHIFT key
  and right-click/Select all the files you want.

  (3) I don't know what kept deleting
  file pictures... maybe the connection
  the phone was still in memory. And maybe
  the phone was still connected by USB after the
  turn it back on. Who knows? At least the folder is deleted
  now.

  If you ever have a file that cannot be deleted.
  Try the software free Unlocker:

  Unlocker
  http://www.filehippo.com/download_unlocker/
  (name of the file to download: "Unlocker1.9.1.exe")

• system crashed, I need to select the first boot device in the boot menu...

  my computer crashed and has a black screen I have reboot by pressing F8 and then to the start menu

  What now?  Press and hold f8 at startup takes me the blue screen with 3 options 1) esc = boot menu 2) f10 = set up 3) f11 = system restore.  I don't have a disk to restore the system or boot disk.  What should I do

  +

  Hello, thank you for using the Microsoft forums!

  What happened when you "press f8 and went into the start menu. ?  You should have seen the inscription as:

  'safe mode', "safe mode with networking", "last known good", etc. etc.  In these situations, it depends on what the computer or the user was doing when the computer crashed, what the line of resolution would result. Just from the top, select Safe mode and try to start.  If windows starts, there are probably a problem with drivers not loaded through a secure boot which only loads the windows drivers of base needed for windows open and run in a limited mode. While in safe mode, we will offer you the choice to use the SYSTEM RESTORE to restore your computer to an earlier point in time where everything worked well. In unknown situations, when I'm in front of a computer when you know not what caused the accident, I take a point of restoring older and not the most recent one, preferably a machine made on its own schedule, not a constraint by a device or driver installation. Note that a SafeMode restore is not generally reversible, i.e. canoe must be cancelled at the point before the restoration (in this case, the condition has crashed), yet other points before and after can be subsequently used.

  Once you have done this, or even before, if you would not rather try this again, you can use Event Viewer to try to find out what happened before the crash. Check the system and application logs, for the latest entries and repost here about this if you need help with the content of the newspapers, and we will try to help you. Alternatively, if you get it running, then you can visit this site to help you with additional questions. This is the new, free and fully automated from MICROSOFT support portal, and it can help you with most of the problems windows with a few mouse clicks.

  http://support.Microsoft.com/FixIt/default.aspx

  "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• Crashing Windows

  HI, I got this message and I don't know what I can do to solve it.

  This happens randomly and after my computer restart I have this:

  BCCode: d1
  BCP1: 0000000100000008
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF880040100B0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Can someone help me how to fix my computer and prevent these crashes.

  Kind regards.

  When your computer crashes with a Blue Screen Of Death (BSOD) the events leading up to the accident are kept in memory until you restart your computer, when they are written to a file (called a DMP file).  This file is critical in our diagnosis

  
  

  How to find and download the files to us for analysis.

  There are 3 files that will help us to know what caused the accident.  The DMP , the output of MSinfofile and your computer specs.

  If your computer does not start normally, you can get the files to start in safe mode (F8, often).

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  The procedure to find and download the DMP files:

  Go to C:\Windows\Minidump and drag the content to your desktop. If the minidump folder isn't there or empty it may be a larger DMP file located in C:\WINDOWS, called MEMORY. DMP which we can also use.

  Zip files using compression on win construction 8 or winzip/winrar on other operating systems.

  "Download to a service like OneDrive of file sharing or"Rapidshare"and put a link to them in your answer.

  Link to find out how to download the DMP file is here

  The procedure to run MSinfo32

  Go to start > run > MSinfo32 > enter (depending on the OS)

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are also useful to include them if possible.  You can use an application like Speccy, AIDA64, etc..

  Troubleshooting

  If there is no "minidump" folder, or the folder is empty, make sure that "minidumps" are enabled.

  
  

  To ensure the minidumps are enabled:

  Click Start, in the search box, type: sysdm.cpl, press ENTER.
  (In victory, 8 you can use the 'win' windows key + "s")

  On the Advanced tab, click on the Start button and recovery settings.

  Make sure that automatically restart is unchecked.

  Under the heading of the writing of debugging information, select partial memory (256 KB) image in the drop-down list (varies from 256kb).

  Ensure that the Small Dump Directory is listed as % systemroot%\Minidump.

  OK your way out.

  Reboot if changes have been made.

  If the minidumps are still not created, check these reasons as to why that may happen

  For discharges to be product what follows must be correct

  Paging file must be on the same drive as your operating system

  The basic file size must be greater than the physical RAM installed

  Windows Error Reporting (WER) system service must be set to MANUAL

  Value file system run on the operating system drive

  The value of options/crash recovery system "kernel memory dump".

  User account control must be running.

  Sometimes the SSDS with an older firmware are not DMP (firmware update)

  Applications like Ccleaner cleaner remove DMP files to avoid them until you're fixed.

  Bad physical RAM can prevent the data are recorded or written to a file on reboot.  If you suspect bad RAM run Memtest to this wiki

  Complete memory dump can be deleted (in win 7) If your disk space is less than 25 concerts, but if you have configured your system, as suggested by the above you should be not generating complete dumps.

  If you receive the message "Access denied" or "file not found" when dealing with the DMP files, you will need to take possession

  Click on these links.

  http://www.thewindowsclub.com/take-ownership-Windows-8

  http://Windows.mercenie.com/Windows-8/How-to-take-ownership-permission-of-a-file-or-folder-in-Windows-8/

  If you still have a problem creating a folder on your desktop > copy files > compress (ZIP) file > transfer to your Onedrive and put a link to it in your next post. DO NOT LEAVE THEM ON THIS WIKI!  

  If you have any questions about downloading to visit... Link to find out how to download the DMP file is here

  If you continue to crash, you must download the new DMP files as they are different

  Another Wiki, you may be interested

  S ystem file checking (SFC) Scan & repair system files

  Troubleshooting Windows/basic material
  

  You can learn more about the BSOD
  

  You will learn how to test your memory

  An effective question becomes more quick help
  

  Pilot auditor-stalking a bad driver to behave
  The system utility, MSCONFIG.

  Windows performance recorder

  Electronic mail systems... Differences explained
  Bugcheck Code 124
  

  Back up your important data from the Outlook.com e-mail.

  BCC101 clock watchdog timeout troubleshooting

  
  Co-author of JMH3143 / ZigZag3143
  The zig - zag team

• RESOLVED - BSOD - Win7 - hostednetwork

  Hello

  I'm one of those guys who knows enough to be dangerous.

  My machine is a Vostro 1015, with a very fresh and fully update Windows 7 Pro x 86

  I was preparing a mysterious book that has spit out of my printer, which contained some info from networking.  It referred to IP 192.168.137.1...

  My research led me to the command:

  netsh wlan

  Which of course, adventerous type, continue the order with:

  netsh wlan start hostednetwork

  Immediately followed by BSOD.

  I can't enter safe mode with networking (no more BSOD), and so I can't follow with the command:

  netsh wlan hostednetwork stop
  

  Which I assume that would result in my stupid decision at the START it in the first place.

  This last command, "safe mode without networking", annoys me:

  Automatic configuration (wlansvc) wireless service is not running. The hosted network could not be stopped. Reason code is 0.

  Further research on this issue, has led me to more than one forum that discusses the wifi adapter driver issues... But I don't know how this applies to me, or what to do about it.

  Also, I had no intention to set up a virtual network, I understand now that's what I've done inadvertently.

  Any suggestions or ideas on this cancellation would be useful.

  Thank you, Kris

  PS, I can provide the BSOD dump files if that would be helpful.

  Kris,

  Restart the computer and run the full diagnostics, press F12 at startup. report error codes.

  Download and install Resplendence Software - WhoCrashed

  Click on analyze and see what caused the accident.

  Rick

• Ask about webvpn error recovery

  Hi experts

  I have a query when webvpn error recovery is enabled, it won't save much in the ordinary crashinfo; However when it is disabled, it defintely records many details in the crashinfo .is this crashinfo for webvpn separately from the usual crashinfo or it is a part of it? I think that crashinfo webvpn can be seen by the command 'display details webvpn crashinfo '. Is this optional command to see the crashinfo (IE can be probably it will only give webvpn related information). The reason why I ask is that I can't understand if a separate crashinfo is saved in flash for the mistakes of webvpn if disabled error recovery?

  Well, the minidump is more information about the recover real webvpn. With accidents, normally we don't yet know the cause of root or what triggers it.

  As I mentioned earlier, if taken eventhough on error is enabled, if ASA itself could not get it back, it will still crash and produce crashinfo.

  Following your question, minidump and crashinfo are 2 different things. Minidump will provide information on recovery and crashinfo will provide a pointer to what specific function accident.

  Most of the customers don't like the ASA where it is actually at the scene of the accident. The webvpn error recovery function is to minimize the ASA to plant if possible.

  I don't think that allowing error recovery contributes to high CPU/memory usage. In fact, it is recommended to activate the function.

• How to remove private photos just returns

  How to remove private photos just returns

  Unwanted duplicates have file names
  who are before of "copy of".

  If Yes, they are created when you multiple
  Select all in now the Ctrl or Shift keys. If the
  you drag (even a single selected group
  bit) when you release the mouse button... copies
  all photos will be displayed.

  Just to check... Here's how to reproduce the
  the unwanted copying...

  Hold down your CTRL key and select multiple files...

  Place your pointer over the selected group
  (holding the key ctrl) and left click / drag
  the group even just the slightest bit... now
  release the mouse button. (what happens by)
  accident in the quick selection of the files)

  Duplicates 'Copy of xxx.jpg' will appear.

• Muse will crash at random with how can I resolve this warning message?

  I am currently working on a Web site and randomly it will crash while I'm working in the program. It does not seem to be associated with specific actions that I do. How can I fix it? Muse also seems trolling is anyway to solve this problem as well?

  You get an error with crash? What is the accident happens on specific measures or occurs during the opening of Muse?

  Try to install the update that came out today and see if that solved the problem.

  Thank you

  Sanjit

• ID does not transer of old Mac Pro to the new iMac.

  With a Mac, it is possible to transfer all Applications and the prgograms of an old computer (e.g. Max Pro) to a new one (e.g.iMac) using the migration wizard. This makes labour infact except Adobe Indiesign 5.5. Trying to lunch program ends with a total crash and an error message. However, this is clearly what caused the accident.

  You should reinstall Adobe products on the new machine, no transfer/migration.  The machine gets tied up your registration as part of the installation/activation process.

• Alien Autopsy does not start

  Alien Autopsy (as well as PC Doctor) does not start when I click the icon.  I appear to be installed properly.  I have uninstalled/installed several times with the same result.  I have a laptop from Alienware 18.

  @Brians4902 thanks for the reply I'm sorry that it wasn't earlier... my computer is down.  Unfortunately for me, your suggestion did not work.  I used Alienrespawn, reduced the system to original settings and re installed everything.  I still don't know what caused the accident.  Thanks for your help.

• Dynamic links / GetLanguageID error CS5 - Win7 x 64

  I can't get Adobe CS5 to start on my machine! It's a DynamicLink error or the one below.

  Have you tried:

  -all codecs removed from my system (using VLC player, Divx...)

  -uninstalled CS4 (and then ran the Adobe CS4 Clean Script)

  -started AE CS5 now press SHIFT + CTRL + ALT, delete all settings

  -launched "Adobe QT32 Server.exe" manually, then launched AE CS5

  
  Nothing... always crashes on startup! Please someone help!

  
  My system: Windows 7 Pro, 64-bit, Dell T5400, 2xXeon E5440, 16 GB of RAM

  

  Hello

  Just after the error message, go to the event viewer.

  It can provide information on what caused the accident.

  "I was suffering with the same question and later found through Event Viewer is: divide the Media Labs ' that I had downloaded

  created conflicts with AE CS5.

  I removed it and AE CS5 started to work very well.

  It will be useful.

• Flash Player 9.0.60 crash

  Hello
  
  Flex Builder 3 to get the benefits of the Profiler I tried but I was encounter strange errors. I can handle simple applications of profile (to the Hello World), but whenever I am trying to launch our professional project, flash player crashes and it bring down my browser process too (it does if I try to run it from the server locally, in debugging or in the profile and wheter I try access to IE7 or Firefox). The application was working without any problem on the previous version of the player (I had one supplied with FB2... 1.0.28 I think it is).
  
  Here is the firefox error message appears:
  AppName: firefox.exe AppVer: 1.8.20070.25881 ModName: npswf32.dll
  ModVer: 9.0.60.120 Offset: 001afb95
  
  If it can give advice, our main application depends on 2 other pre-builded flex libraries 2.
  
  Novel I also tried to rebuild the application in FB2, FB3 FB3 with flex2 sdk and FB3 with flex3 sdk flex 3 sdk using the option of compatibility without success. So far, only way I found to get the currently running application is to roll back to the previous player, but which prevents me from using the Profiler.
  
  Someone has any ideas why this error occurs (or what this error is at all)?
  
  Thank you!
  Q.

  I finally found what makes the accident of flash player. so allow me to debug and profile my request.

  It turns out that the player can't handle class library override... in other words the application doesn't have to redeclare a class library. So if you don't use hot fix to resolve the problems of classes in the library you use, and there will be no problem.

  (I have is if you have the 'L' library that declares the class 'c', under 'p' path and you must use a fixed version of class 'c', you could copy the fixed class in your project under the 'p' path and tell the compiler to use your version of the class, so you to have fixed the version of the library before it is released) It worked perfectly with previous versions of the player, but not this one.)