What is appropriate to use for ToolTips form?
I'm familiar with tagging of PDF documents for accessibility, have some experiments with the properties and fields of the form, but little experience accessibility of forms.
My question is not technical, the tags are beautiful and fields are there properly. My question has to do with how much information should be included in the ToolTips. All of the examples I've seen have short text of the question, for example, "first name:" followed by a text field with a ToolTip like "Enter the last name (required)."
But what about questionnaires, where a long (e.g., 3 sentences) question is followed by a text field for the answer? What kind of ToolTip should be the text field? Should he repeat the question? Or just something like "type your response here?
Or, say, a long question followed by a numbered list of items, each a long sentence with a yes / no radio no button group. What kind of ToolTip should have radio buttons?
I understand setting up the "Radio button choice" under the tab 'Options', this issue is all that must be included in the 'Tooltip' field under the 'Général' tab
Thank you.
ToolTips, if used, would be a brief description of the data to be entered in the field. It would not need to be the whole investigation. We could leave blank or us something like "select an Item."
Tags: Acrobat
Similar Questions
-
What operating system I use for iPhone 4?
What operating system I use for iPhone 4? It will work with OS 9?
7.1.2 No. is as high as possible.
-
What vmnic driver to use for the spine of 10g
Hi any recommendation on what vmnic driver to use for the virtual machine if I have a spine of 10g? I use Vcentre 4.1 U2
Hello.
This will depend on the guest OS, but if you just want pure performance then VMXNET 3 would be the one to try. Also check out the kb VMware "choose one network adapter for your virtual machine.
Good luck!
-
What VB6 API to use for Resultlist
Hello, I am trying to extract portions of the resultlist of teststand 3.5 in VB6. In particular, I try to get the err.code and the err.msg of the last step in which the error has been reported in teststand. I don't know what object API to use. In 'teststand help' index, I noticed a Table STEP_RESULT schema, which contains error_code and error_message, but I'm not sure how to apply in VB6.
My apologies Dan. Here is the link to the reference for the TestStand 4.2 manual.
For step 4 of my post above, please replace Parameters.Result with Parameters.Step.Result.
For example, instead of Parameters.Result.Error.Code, you would use Parameters.Step.Result.Error.Code.
I hope this helps.
-
Should what audio drivers I use for Windows XP?
I need to know what audio drivers should I use for Windows XP?
Use the XP drivers for your model.
Download drivers
Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions.
-
Know what Android SDK is used for compilation
Hi, I wonder if there is a link any documentation or something that we can easily see what Android SDK has been used in every AIR SDK to compile the .apk files? For the moment, I need to know what version of Android SDK has been used for AIR SDK V23?
Hi Hadi,
Please go through the release notes below and refer to the upgrade of the Android SDK section:
Flash Player Help. Release notes | Flash Player® AIR® 20 20
We always have the same version of Android SDK for AIRSDK 23.
Thank you
Adobe AIR Team
-
What systems the Pros use for the first, After Effects and SpeedGrade?
I bought the complete creative cloud in the hope of a career for me in editing audio/visual. The problem is my system doesn't seem to be able to manage the software, especially when changing back and forth between the three programs mentioned above. In addition, my first project cannot export correctly. In addition, throughout its development the offbeat bad system. And that's after following all of the recommendations of preferences available under tutorials Adobe and elsewhere on the Web.
Here is my system:
SYX-P67A-C43: Intel Core i7 2600 (a unit of 8 strands) to 3.4 GHz with 8 GB of RAM (which will be soon 16) with a NVidia GTX 550 card, 1Gig of RAM.
As you can see, it's well beyond what Adobe claims to be the minimum requirements. It is obviously NOT the case.
What systems the Pros use (like the guys in the tutorials) for the first, After Effects and SpeedGrade? Give me accurate machines with all the specs so I can a price upward.
Right now X 99 with DDR4 gives best performance for media applications of particular content with GPU acceleration. I suggest an I7 5960 X, 32 GB of DDR4 2666, 980GTX video card and Asus X 99 board with storage depends on the media. Far, who will perform the 2600 is old of 2 generations at this stage, which is only a Quad core with HT. The same X 99 tips can also manage the Xeons V3 if you upgrade the processor in the future for a larger load in real-time.
Eric
ADK
-
What order should I use for iPhone more 6s?
I am new to Premier Pro, but I have a question. Which order am I supposed to use for images shot on the iPhone 6 more. Mobile & devices does not work so please help me.
[Left the lounge general Forum, troubled for a specific product - Mod support forum]
Everything you have to do is your film simply drag the icon of the sequence and it will create a new sequence for you with all the correct settings.
Alternatively, you can start editing your video right there on your phone with Clip first from Adobe app, and you can open this project inside Premiere Pro when you return to your desk.
-
What background process is used for data files retriving data
Hello
What background process is used to retrieve data from data files
as I know dbwn is used to write the data to the SGA buffer cache in data files
and I want to know that when the recovery of data from the data file in the buffer cache that back ground process is used
I want to process structure
Thank you
GitaHello
What process will write to connect to buffer?
Process server :)
Kind regards
Rakesh Jayappa -
What HARD drive I use for Satellite L305D-s5868?
I need to replace the drive hard on my * Satellite L305d-s5868 *.
What is the form factor for a replacement disk?
* (Width, Height, Length) *.Can a * SATA II drive * be used?
TIA
I agree with Akuma. You need a HARD drive 2.5 SATA.
The SATA controller is compatible downwards, which means you can use a HARD SATA II in SATA drive I have controller.Cheers mate
-
What memory can I use for Satellite L20-100?
Dear Sirs,
Please, help me to understand what type of bars of memory is compatible with satellite L20-100?on your site I found the description only for L20 - 101 -.
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=107212
-
and it is this:Standard system memory: 512 MB
maximum scalability: 2 048 MB
technology: DDR2 RAM
expansion module sizes: 128, 256, 512, 1 024 MBbut on different sites, I found this module maximum expansion size = 512 MB
and in the instruction manual (pdf-Russian) they say that the module is DDR instead of DDR2!
which one should I buy?
This is a appropriate:
Kingston DDR2 512 MB PC-4200 (533 MHz) SO-DIMM KVR533D2S4/512
200 pine?I can even use but 1024 MB?
Hello
Well, I think that it should be possible to upgrade the memory to 2 GB (2x1024Mo)
I also found a site of memory module very useful:
http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20683&ft=m&St=3and according to this site, it should be able to use the 200-pin-DDR2-533 modules SODIMM
-
What RAM should I use for Tecra 8000
Hello
does anyone know what RAM I need for my Tecra 8000
I need the number of PAwith greetings
Hello
The Tecra 8000 is an oldie and it therefore RAM modules that are no longer used in most models of laptops.
As far as I know, you need the module SODIMM 144 pin PC100.128 MB part number is PA3005U
Good bye
-
OfficeJet 4650: Can not know what connection type to use for my OfficeJet 4650.
OK, I'm very "technically challenged" here, so bear with me. I had a HP Deskjet 3454 and unplugged the connections between it and the tower. I thought that the same ports on the back of the old printer compatible with the new printer... ports would not be so. There was also a small black adapter with a purple connection on one end and a connection of two pins at the other end on the old printer. I don't know what to do with that and my new printer... The instructions say "no USB cable included" and I don't know what to look for when I go to Best Buy.
I have an ATT router connected to my computer, but no ports on this subject corresponds to nothing on the printer, so I don't think that I have a "wireless connection".
You can see that I really don't know much about connections, good! Help! I had to USE MY PRINTER. Thank you.
Judybelle
Hello
OK, you can connect wireless computer also supported wireless using the same wireless router. If you want to use the USB connection, you can reuse the old cable or buy a cable that is similar to the following cable:
Kind regards.
-
What settings should I use for the rear button focus put in place for the d5 mark 3? TIA
5 d Mark 3
When you press the menu button, highlight on (using the knob on the front of the camera) menu "C.Fn2: disp.» "/ Operation" orange. (it's the icon of a camera that has an index of points for a light meter below - right of the wrench, to the left of the star icon).
Each of these menus on the 5 d III have several pages. This is the 2nd page (the 2nd point from left to right) who has the category of "custom controls". Note that (using the wheel on the back this time) and click on the set"" button.
Which displays a menu showing each of the important controls on the back of the camera and what they do. Highlight the icon for the shutter button (this modifies the behavior of a half-press) and change to 'measure and AF start' to just 'start of counting.
"AF-ON" button (on the back of your camera) is probably already put 'measure and AF Start' (I think that this is the default factory setting).
If you're not so much focus to enable back-button (which is probably already active) you're more "power off" the focus when the shutter button is pressed to halfway.
Good luck
-
What drivers should I use for HP Envy 4 on Windows 8?
1. number and product name
HP Envy 4-1054TX2 operating system installed
Windows 8 Pro 64-bit3. error message (if any)
4. all changes made to your system until the problem occurred
Upgrade to Windows 8 Pro to Windows 7 Home Premium, 64-bit versionsI have recently upgraded to Windows 8 Pro and there are only 2 drivers available on the site for my laptop model: the Wifi and Bluetooth drivers. Most of the drivers have been installed by Windows 8, but there are 2 elements in the devices without a driver, PCI Simple Communications Controller and another unknown device manager.
There are some drivers for the Intel 4000 and HD 7670 m but I did no switchable graphics. There is no center of control of AMD, Intel just one.
To make things worse, my battery life has been reduced to 3.5 hours of 5.5 or 6.0 hours when using Windows 7. I did all the usual settings in the power settings advanced, as well as for the Windows 7 install so the only thing I can think of is maybe the drivers from the chipset?
Any help I can get would be appreciated.
Hi brightframe,
Take a look at this document http://goo.gl/CO6uV , which covers some information, including topics on driver problems.
More than likely HP won't to material support for W8 on any system purchased before October 1, 2011. Some updates for W8, most drivers W7 will work in W8.
For anyone with Windows 7 and given update on Windows 8, can run the Upgrade Wizard software, it will scan your PC and report on what is currently installed on your PC is compatible with the W8.
http://goo.GL/z8LVfPlease let me know if it helps.
Maybe you are looking for
-
Need drivers for my Satellite A30 504
WHERE CAN I FIND THE DRIVERS FOR THIS MODEL? PLS HELP! I WILL SOON DIE BECAUSE OF A CRISIS HEART LOOKING FOR DRIVERS...Sorry for the large fonts but I am desperate... show me a link pls!
-
Hi all! I am using HTTP PUT in labview 2014 to send a command to remote device ethernet to activate a beep. I can successfully send the command and get the buzzer to turn on using a tool like PostMan (google tool App), however, when I try to do in
-
How to stop a Web site generating spams are sent to me - it is all associated with the use of viagra and I had 10 different emails today Thank you
-
Hello! We have a few problems with the RDP connection: When we install some Microsoft updates on a computer, it is not possible to connect to it. Must unplug the network cable and then reconnect it. After this operation, we can use RDP connection. Is
-
How can I view or load a flash drive without having to download all the content.
Previously, with assistant, there was an option to do NOTHING to DO when you plug in a device (USB, CD key or camera), but I don't see this option now? The program automatically downloads all of the volume that makes multiple copies if you keep a fe