What is cross?

Similar Questions

• How to find the time to what zero crossing point occur using zero crossing vi

  Hello 
  Im trying to find the time to the point of inflection of a Bio-Signal with the 2nd derivative, then detecet the point of zero of the derivative signal
  What I need, is to mark the point of inflection on my Bio-Signal at the point where the derivative signal crosses the zero.
  

  The second has two scales on the graph, one on each side.  The first has only a single scale. I do not change the name of VI, so both have the same name.

  Lynn

• What is crossing the line in terms of frequency of feed?

  Our team of marketing operations was born there is a little more than 3 years with a commitment to integrate Eloqua 9 with SFDC for both. (We are now on the E10)  Internally, the answer we faced during the introduction of the concepts of digital body language and feed was often remarks of 'creepy' and "isn't that spamming", etc... We agreed to maintain a policy of 1 email per month, per contact, while keep in touch segmented into a unique foster campaign.  Today, we have an engaged audience and solid matter content in several different feeder campaigns.  Our marketing ops team feels we can increase the frequency and perhaps even offer our contacts to subscribe to several campaigns.

  It would be good to hear any ideas or comments on email how much would be considered too expensive for a contact in one month, and if someone could share metrics similar attempts to increase the frequency of the innate.

  Looking forward to learn from you all!

  -Joe

  This certainly isn't an exact answer, but I would say that you should test, will give your audience the opportunity to select frequencies (in your Center, preferably) and see in how far you can amp volume until response rates deposit and/or increase in churn.  There is no exact for her formula because she is very specific to the quality of your content and your audience desires but, test test!

• Music Apple shuffle verses the word shuffle icon

  I start music Apple (the app - a.k.a Apple iTunes on iOS), tap my music hit Playlists, then hit the white area between the icon and the symbol «...» "and I'm presented with a screen.  In top of the list of titles, on the left is "Shuffle" and the right is the shuffle icon (two lines that twisted a half turn).  These two seem to do exactly the same thing.  Am I missing something?

  I have other questions / problems in this area but lets start here.

  No - the word "shuffle" is just what will make this little icon to the left (two crossed arrows). It is intended for people who do not know the Apple icons and might wonder what the cross-arrows.

• ASA software order of operations

  I'm trying to find a graph or something that identifies the order of operations what ASA cross when traffic passes through the appliance. I found different info already, but nothing him explained me the specific point, the decision is made to not let traffic pass interface more high level of confidence to interface low enough level of trust. When she assesses levels of security access lists? When does a decision of routing security levels.

  Thanks for any info

  Here is an example:

  fwasa01 # entry packet - map out tcp 5.5.5.5 1024 172.16.64.101 22

  Phase: 1

  Type: FLOW-SEARCH

  Subtype:

  Result: ALLOW

  Config:

  Additional information:

  Not found no corresponding stream, creating a new stream

  Phase: 2

  Type:-ROUTE SEARCH

  Subtype: entry

  Result: ALLOW

  Config:

  Additional information:

  in 172.16.64.0 255.255.240.0 inside< routing="" wants="" to="" route="" the="" packet="" from="" outside="" to="">

  Phase: 3

  Type: ACCESS-LIST

  Subtype:

  Result: DECLINE

  Config:

  Implicit rule< outside="" interface="" has="" an="" inbound="" acl="" which="" doesn't="" mention="" "172.16.64.0"="" network,="" so="" the="" implicit-deny="" will="" drop="">

  Additional information:

  Result:

  input interface: outdoors

  entry status: to the top

  entry-line-status: to the top

  the output interface: inside

  the status of the output: to the top

  output-line-status: to the top

  Action: drop

  Drop-reason: flow (acl-drop) is denied by the configured rule

  So to answer your question, when the packet flows of low trust in the high level of confidence it goes like this:

  1 course

  2. check the ACL< if="" no="" match,="" drop.="" acl="" is="" required="" if="" going="" from="" low-trust="" to="" high-trust.="" if="" no="" acl="" is="" configured,="" and="" this="" is="" inbound="" session,="" the="" packet="" is="" dropped.="" acl="" is="" not="" required="" if="" going="" from="" high-trust="" to="">

  3. If nat-control is disabled (default): try to find nat/static flow correspondence or existing (there are a few things here depending on where the session initiated from), if no nat found config found, send the package without nat

  3B. If nat-control is activated: there must be existing or nat/static flow

  There are other components, but these are the most important

  Kind regards

  Roman

• Question about VCS 7.1 Media flow-thru

  We currently have a way to call that looks like this:

  Endpoint (SIP and H323) > VCS control > VCS - E (SIP and H323) neighbouring area > firewall > neighbouring area to the CUBE (NOT only).

  When the VCS-E they interact SIP to H323 he directed media flow-thru allowing traffic through the firewall because it proxies all media and signaling.  However, if the call all the way SIP, it will proxy the call signaling but not the media.  Right now, we have it working, but we need to convert SIP H323 calls then back to SIP for it to work.

  Is there a way to force the VCS-E to proxy all media to the CUBE, rather than some media of interoperability calls?  I know it's usually what a crossing area is for, but AFAIK that does not work when you use CUBE to VCS-E.

  VCS - E has obviously the hardware capacity and processing to do this (because he now works via workarounds) so I hope that there is a way I can do a little more cleanly.

  Hello Nick!

  I don't know your deployment, especially when you run a nearby area of the

  VCS - c to the-e probably works, but you should know how it behaves for really knowing why

  to use it, and a hack so save licenses is often not the best starting point.

  You can configure the routing of locking media which will link the media to the vcs-e.

  (this may not work with all types of areas, at least all the profiles of the area, but at least it does with custom)

  *h xConfiguration Zones Zone [1..1000] Neighbor SIP MediaRouting Mode:
  "Specifies how the VCS handles the media for calls to and from this neighbor, and where it will forward the media destined for this neighbor. Signaled: the media is always taken for calls to and from this neighbor. It will be forwarded as signaled in the SDP received from this neighbor. Latching: the media is always taken for calls to and from this neighbor. It will be forwarded to the IP address and port from which media from this neighbor is received. Auto: media is only taken if the call is a traversal call. If this neighbor is behind a NAT the VCS will forward the media to the IP address and port from which media from this zone is received (latching). Otherwise it will forward the media to the IP address and port signaled in the SDP (signaled). Default: Auto"
  

  You must find the area id, then enter in the tsh - cli (admin ssh access):

  (replace with your number)

  xConfiguration Zones Zone Neighbor SIP MediaRouting Mode: Latching

  There are other options that might be of interest as setting routed to this area for ever,

  interwork or custom zone settings options, I would recommend that you're looking for by using the command line and Administrator's guide

• need to do a second 20 HD clip with a moving background image and the text it is flies in...

  Hi all the effects quite new based on im and the need to make a second 20 HD clip with a moving background image and the text it is flies in. I also need to create a cross-image basis. If someone could suggest the best way to do this it would be greatly appreciated. Thanks in advance

  Your question is not really explain much of what you need to achieve.  I don't know what a "cross image database", sorry.

  After Effects is a fairly complex application, and you will get much more satisfaction if you start at the beginning and learn the basics before jumping in too deeply.

• I go out a circle crossed and he died. What can I do?

  I wiped my macbook pro using a command in the terminal. After the wipe. I get a flashing with question mark folder. I load the OS X disc. I now start the C"" key.  Then I get a circle crossed and then stops the macbook pro. I tried to do a reset of the PRAM, a SMC discount without any result. I tried to make internet recovery now 'R' on startup and when I connect to a wifi network, it freezes or gives me an error. I did a Deputy of the recovery on a flash drive disk and still, it gives me a crossed circle and stops. I tried another harddrive and still the same. I have a disk with Mac OS X pre-installed and put the macbook pro. Still, he died. I thought it was the purchased HARD drive I tried to work on different HARD drives and still gives me bar circle. I can't go in the disk recovery utility or the internet. Help.

  What is the EXACT model/year of your MBP?

  Ciao.

• What is the right way to this cross-platform application?

  Hey y ' All

  I am a multimedia application with LV2010 and I am trying to do cross-platform (win and mac os x).

  The I need the feature requires the use of system libraries, I have access to enough similar functions in the two operating systems

  (winmm.dll in windows, coreMidi.framework in mac OS X)

  With the exception of the current system of appeals on the screws will be identical.

  I can do the work of VI in a platform by using the call library function node, but I don't want to have two copies of everything.

  I tried to do sub wrapper VI that puts the call library function node in a case statement and detects the OS but this VI will not executable due to dependencies (will not find the library referenced in one of the cases depending on the operating system you are running)

  Is there any way I can specify what Subvi to load on a project or something to get this issue sorted dependency?

  You want to encapsulate the platform-specific code in a conditional structure disable with a condition for each supported platform.  The symbol of the OS is already defined; see Help for the creation of disable Conditional Structures, which lists the predefined symbols and values.

• I AM UPDATING MY COMPUTER AS OFTEN AS I CAN AND IT CROSSES THE PROSSES TOGETHER AND AT THE END IT SAYS UPDATE FAILD WHY? WHAT SHOULD I DO TO FIX THIS

  I AM UPDATING MY COMPUTER AS OFTEN AS I CAN AND IT CROSSES THE PROSSES TOGETHER AND AT THE END IT SAYS UPDATE FAILD WHY? WHAT SHOULD I DO TO FIX THIS

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  How to fix Windows Update, Microsoft Update and Windows Server Update Services installation issues:
  http://support.Microsoft.com/kb/906602

  1. see the "need help?" Tell us what problem you are having"section of http://support.microsoft.com/ph/6527

  2. you cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  3. check your WindowsUpdate.log (% windir%\WindowsUpdate.log) to find errors associated with the download/install.

  How to read the WindowsUpdate.log file
  http://support.Microsoft.com/kb/902093

  3 b. errors compared to those listed here: http://www.bleepingcomputer.com/blogs/mowgreen/index.php?showentry=1122 or go tohttp://windowsupdate.microsoft.com > click on help and Support link in the left pane > solve problems on your own.

  ================

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  ================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Is it possible to cross the items in reminder similar to what you would do for a list of the written tasks?

  I want to use the text "off" option to cross the items on my reminder similar to what I would do with a written reminder.  In this way, I know what items I have completed as well as article I have left to do.  Is it possible to do this by using Sticky Notes?  I seem to be finding more reasons to not use this tool (cannot easily change fonts and now this...).

  I found it.  Highlight the text and use CTRL-T.

• I use Windows 7, I've updated from 4.4 to 6 lightroom development module is now disabled: diagonal white area blue cross; I couldn't find any hint what to do, who can help? Helmut

  I use Windows 7, I've updated from 4.4 to 6 lightroom development module is now disabled: diagonal white area blue cross; I couldn't find any hint what to do, who can help? Helmut

  Clear the option use the GPU in the execution of the LR preferences tab.

• Trying to understand what he in @incontext: average when you create a variable in a cross tab report.

  Try to understand the cross tab reports.

  I'm looking at 3 different examples.  I have a question about something I see on 2 examples.

  Example 1.
  http://2.BP.blogspot.com/_F24IZvIkLOI/SrpSl8JSEBI/AAAAAAAAAlQ/ETt_kB3dIew/S1600-h/IKE.jpg
  <? for each group -: / EXPENSE_REPORT/EXPENSE_ITEMS; / DATE? >
  <? variable@InContext:G1;current-group()? > <? DATE of? >

  
  Example 2.
  http://technology.AMIS.nl/2007/01/30/XML-Publisher-building-a-matrix-report-sqllims/

  <? for-each-group@section:row;. / SAMPLE_ID? >
  <? sort: SAMPLE_ID; ' ascending '; data-type = "text"? >
  <? SAMPLE_ID? >
  <? variable@InContext:SAM_ID; SAMPLE_ID? >

  My question is..? variable@InContext: creates a variable but what incontext means?

  Sound in the two examples.

  Both create variables but and in example 2 explains the variable SAM_ID will hold the sample_id for this group.

  My question is why - what is needed?

  Thank you

  Howard

  -is to define a variable 'G1' and him assigning the value of the field Current - group (). The @incontext command maintains the variable located inside the loop... (you can not update but you can simply reference or re - declare)

  You can insert a field (BI Publisher menu - field and select a field from your xml file) and then double click on and click on properties of Word-> help add some text and then edit (delete the existing code or modify the code to what it must be)

  Thank you

  ~ KKT ~.

• Cross dissolve with adjustment layers is not melted properly? What about Adobe?

  Hello

  I have Premiere Pro 2015.2 installed on a PC in Windows 8.

  The standard cross dissolve works very well. However when I apply the fade crossed to adjustment layers (I do if there is a change in the settings, such as color correction, otherwise there are a white flash in the middle of it) the cross dissolve is no longer working properly.

  It passes slowly and keeps the transferred video to very low (barely visible), then all of a sudden the music jumps at the end of the transition. This obviously isn't ok, it seems broken and not how you want to see a cross dissolve.

  If I could get assistance on what is happening and how to correct this injustice that first pro is made for me.

  In the final stages of a project of the year and is the last thing that I was hoping to have a problem with.

  OK to import the project, then changing the adjustment layer seem to work. I have to import many different projects into a master project in any case it should be good. Thanks for your help, I appreciate it

• What trigger is fired when the user closes a Web via cross sign which is in the upper right

  Dear all,

  I have a form that requires a separate canvas. Please tell me what trigger is fired when user close a canvas via cross sign that exists in the upper right (the sign of the cross appear as the corresponding window contains the property of: close the permit YES).

  Concerning

  Rajat

  Never heard of a trigger key to closing.

  As they said above, when you close a window, CLOSING of WINDOW-WHEN trigger fires.

  There you can examine the value of the: system.event_window, which bears the name of the window that fired the trigger.

  A typical use of this must publish a Do_Key ('EXIT_FORM') in your when relaxation window closed

  You don't need to check the: system.event_window, you can have several KEY-RELEASE triggers at various levels if necessary and they will attack the function of closing the window.