What is F-Secure goalkeeper? I found it in Event Viewer with the error
On one of the computers I tried, I think I can get rid of some hackers or hacker, I found this F-Secure Gatekeeper in Event Viewer and they were all in front of them of the error. We buy this software, so I don't know why it is in the event viewer.
Hello
- What is the full error message that you receive in the event viewer (http://support.microsoft.com/kb/308427)?
- You the computer to the domain?
Tags: Windows
Similar Questions
-
All security updates fail with the error A 80071, 91 code
Hello!
System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]
Background:
- UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
- A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
- Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
- This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.
Problem:
- I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
- On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
- All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
- If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.
What I tried:
- Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
- Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
- Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
- Tried a Full scan with MSE. No anomaly.
- Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
- Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
- Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.
I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".
I'm out of ideas. What's next?
Thank you
~ Ibrahim ~.
1. about 1 year, I installed MSE.
2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).
3. Yes, for about 30 minutes before I uninstalled and installed MSE.
4. Yes.
However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.
Thanks for the help, if! :)
-
Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.
Hello Tallydupp, welcome.
Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
Try to uninstall it if it exists.Let us know what happens
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Download works 9 KB2092914 security update and it fails with the error code 646
Update of security for Works 9, KB2092914, downlaod fails with the error code 646
See this thread:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47
Please let us know if that helps.
-
Original title: kb2633171 security update will not install windows vista
Hello
as noted above, the kb2633171 of security update will not install on my computer used windows vista laptop. I had mcafee installed since the first day (it came with the pc). He continues saying failed in the history of updates with the error code 80070020. When I restart the pc, it says that it cannot configure the update and it is up to the old settings.
I ran the fix it and aggressive to solve this problem, no luck :-(
any help muchly appreciated.
Thank you!Chiara
Hi Chiara,
Try following the steps in the following article.
You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates
http://support.Microsoft.com/kb/883825
Let us know if it helps.
-
Identification of customer's Windows 7 NFS UID GID information
I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS. I am able to properly connect Client NFS software by a 3rd party on the NFS server. However, when I use the Client for NFS provided by Windows 7, I am unable to connect. The \\ip address\share Z: mount"command fails with the error code"the path not found network ". I can't do a ping of the computer running the NFS server.
The NFS Client operating system: Windows 7 Ultimate, 64-bit
Data captured by Wireshark
MOUNT V1 EXPORT call 3rd party client
Identification information Flavor: AUTH_UNIX (1)
Length: 32
Stamp: 0xc7065970Machine name: PC
UID: 1000
GID: 1000MOUNT V1 EXPORT appeal of the NFS client
Identification information Flavor: AUTH_NULL (0)
Length: 0It seems that the credentials of NFS Client are not correct. How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?
Hello VDAEMP,
As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
TechNet - Windows Server
Thank you -
I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this...» He does not drive partition root to copy don't know why his account right there.
I solved the problem myself... This is because the Version of Vcenter Converter. I'm using Vcenter Converter 5 to P2V a server Linux RHEL5.2, its not supported by Vcenter Converter 5. That of why I've done P2V using Vcenter Converter5.2 and accomplished.
-
I was downloading the upgrade to Adobe Bridge. It failed with the error 49. What now?
Mcarlclapp the error States just error 49 or does a download error as well? Also, what operating system are you using? Finally, you are on a managed network?
-
How to install correctly update security for Windows XP (KB2419632)? I received the error Code) x 80070005.
PROBLEM SOLVED
Friday, January 14, 2011
I have a solution. He was in two parts: firstly, PA bear in its list of the 6 stages has allowed for me to make the Windows XP security update that was my initial problem. However, then I was unable to update Microsoft Security Essentials was so without virus protection. Finally, I called the phone number of support for the product and was helped by a great person.
The problem was that my system clock changed the date a week in the future. He also suggested that there are probably a variety of different dates used by other applications. In Safe Mode, it updated my system time and date, and all problems are gone.
For those who have similar problems, the clue in MSE was a difference in dates between when the definitions have been downloaded, and when they were loaded. I suspect that the dates were important for download that prompted my initial request for help on this forum, and I know another website with which I had trouble's timestamp.
Thanks to all who helped and good luck to those who have a similar problem!
Before Kaspersky, I had on Windows Live safety - do not remember the name right but had for several years until it was discontinued by Microsoft. I didn't run the Norton removal tool before installing Kaspersky.
Preliminary stage: Please uninstall Spybot & Ad - Aware, at least for now. Two of them include "real-time system protections" that could play a role here.
Tip: If you don't fully understand what that Tea Timer (Spybot) & (Ad-Aware) Ad-Watch do and how they do it, one of them only enable if you decide to reinstall the applications when we're done here. [IMHO, you need not other antispyware applications if MSE is installed & working properly.]
ACTIONS:
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
1B. download Windows Live OneCare cleanup utility, save it to your desktop: http://download.microsoft.com/download/4/c/b/4cb845e7-1076-437b-852a-7842a8ab13c8/OneCareCleanUp.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.
3. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.
4. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.
5. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]
6. restart a last time & test. Make absolutely certain that you can manually update MSE successfully!
Comment: If MBAM detected & removed '5 Trojan infection', there is a good chance that the computer is already infected when you installed MSE a month ago!
~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Update of security Suites KB2596615 Microsoft Office 2007 keeps fails with Ox92D error code
Original title: KB2596615 of Suites Microsoft Office 2007 security update keeps failing
The automatic updates of Microsoft listed that it is impossible to install the update of security for MS Office 2007 suites KB2596615 with an error code of Ox92D. What does that mean? Anyone else had this problem and what to do?
Hello
You are able to install all other updates?
If the problem is specific to this particular update, I suggest you to refer to the article below and run the FIXIT mentioned in method 2 tool and perform the steps mentioned there. If you are not able to install some other updates as well, I suggest you to perform all the above troubleshooting methods.
You cannot install updates after a repair of Windows XP or after Windows XP SP3 is installed immediately after a clean install of Windows XP SP2: http://support.Microsoft.com/kb/943144
Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/You can also see the following article for more information.
MS12-057: Description of the 2007 Office system (MSO) security update: August 14, 2012: http://support.Microsoft.com/kb/2596615 -
Awhile back, I stupidly downloaded Arcade yum. (DO NOT DOWNLOAD THIS PROGRAM) Apparently, I thought that I deleted in the uninstall programs, but not completely deleted. This program has always tried to load all types of advertising or not I was on the Arcadeyum site or not. Even after deletion. And I went through all the folders and find all files and erased AY programs.
Now, I keep getting interrupted by the message: title bar: RunDLL MSG:Error loading C:\users\Paulus\AppData\Local\ArcadeYum\AyHelp.dll
The specified module could not be found.
Well, it would be because I removed it manually as I mentioned earlier. I launches the scan to Microsoft security essentials quick scan daily and complete once a week, but that's it. RunDLL program continues to call to load the program. So I guess the question would be: How can I get RunDll to arrest the appellant for a module that does not exist?
To get knowledge that I have will not load other programs of security due to logic problems, this causes with Security Essentials Program. RunDLL program obviously has a line of code to load the module. How to remove the line or clean the program?
As I hit anywhere on any program opens the box and my typing does more for a second long enough to make mistakes. Really inconvienient. Thank you.
Hello
No program of singles will find everything and that includes MSE.
And the free Malwarebytes, which is not an AV does not r interfere with MSE as Malwarebytes is a scanner at the request.
And when you ask us for advice, we give you the best advice we can.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If the problem persists after scanning, take these startup entries:
"How to use MSCONFIG in Windows Vista"
http://www.netsquirrel.com/Msconfig/msconfig_vista.html
You can also use this free program to do, too:
"Autoruns for Windows V11.32"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
See you soon.
-
Whats with the error messages?
I'll probably be a total n00b, but I'm having some real trouble here. Whenever I'm doing a button to navigate in a stallion or add a loadmovie command and then test the animation that it always strikes me with the warning message "the file flashmovie.swf is trying to communicate with this site," etc., it is getting really annoying and I can't understand why he did this. I use these types of lightning on other sites without warning, so I don't know why my flashes give them. I'm sure I'm just on a small addition to a script or something, but I don't know. Anyone who has had this problem please let me know how you solved it. Also I use Flash 8 Professional. I have read through the settings and seen it says to try some site to get information from other sites using an older system of security. Is there a new one, that I'm not aware? Here is the script that I have in my film flash right now:
loadMovie (" http://www.flash-vault.com/thickandthin.swf", box1);
When I discovered the film with this script, I get the warning. Anyone know what I'm doing wrong? I have the same problem with the GetURL command.Wellman... to meet u that...
If you use this script: i.e. loadMovie ('thickandthin.swf', 'box1', 'GET');
It works, because you are linking to a local file...If you place a full path of the URL, it calls error you...
It is not because the Flash, you cannot do that... There is a way to bypassRead more on Security Sandbox Violation.
-
I tried to download microsoft fix and re-install vista from the disc that came with my laptop but neither stage work (the re - install vista wouldn't let not me full and I received the message)
' upgreade cannot be started. Updated canecel installation level then chooose upgrade to a version of windows that is newer than the one you run 'I use vista 32 bit
Whenever I try to download new security updates I just get error code 80070490
0 X 80070490 - ERROR_NOT_FOUND
Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.The error you receive occurs if there is corruption in the manifest of component maintenance base.
Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
http://support.Microsoft.com/kb/931712
"Explains the SFC / Scannow.A repair install is the usual solution of SFC/scannow does not work.
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537
Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.
Uninstall SP1
See also:
How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspxTaurArian [MVP] 2005-2010 - Update Services
-
Try to install the downloaded drivers when comes up with the error "file not found".
Downloaded the drivers Vista for the HP Photosmart premium C410b and installation of hen comes up with the following error message: file not found
C:/program files/hp C1164EDO-EF08-4B0B-8085-3BDSEAAEFD8D} \gup\at. Any ideas?
Hi daddums1958,
Try using the brush included in the CD or download.
Of the Original installation CD:
1. Insert the CD in the drive and then cancel Setup
2. open my computer and click right then on the CD from the drive and select open
3 open the Util folder
4 open the CCC folder
5. run the L4uninstall.exe
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
9 download drivers and full software features
10. run the download to reinstall the printer
If the software has been downloaded and extracted to your system:
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. run the L4uninstall.exe
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
9 download drivers and full software features
10. run the download to reinstall the printer
-
I get the ready to install icon every day, all the time. Downloads, it will fail to install. I looked at the history of the installation failed, and the error code is 0x8007f0f4.
It's very frustrating, and I wish that Microsoft would issue a patch to fix this problem. I know I'm not the only one having this problem XP.
I tried Safe Mode boot suggestions, I have no viruses, I have a defective keyboard log, and they are all the files 'uninstall '. I don't know what to do with them, so left alone.
See the link below for asistance;
Maybe you are looking for
-
So just curious to know if with the coming IOS 10 will soon work touch 3D on Iphone same 6 if I'm upgrading to the 7plus
-
Homepage layout option does not work after saving a new or different homepage on Firefox 19.0. When you open a new page (not tab) it always comes back to the default "Modzilla Firefox Start Page" value anything.
-
How to upgrade to Safari?
How to upgrade to Safari?
-
HP G42 355TU: SYSTEM DISABLE 67373124
Required administrator password.SUST DISABLE 67373124
-
I imported an album to my iPhone, but now I want to remove it and I can't!
Hello I have iPhone with iOS 9.2 5, I imported an album on my device 3 years ago and several times I tried to remove this album, but I can't. There is no authorization for me to remove it from my iPhone could you please help me find the solution to m