What is fileexttoggle.inf

What is fileexttogle.inf and how to overcome the problem of error in copy?

> ran Registry Mechanic

A likely cause of your problems.  See following long-standing MS MVP PA Bear:

If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

> restarted
"Please wait while Setup copies files to your hard drive.

Did you leave something here?  What you trying to do?
You have a Windows install CD in the drive when you restarted?
Intend to do a reinstall of Windows?
If this isn't the case, that the program installation this refers to?

> interrupted by a power failure

Another likely cause of your problems

now, he tells me that there is a problem is preventing windows to check the "0x80004005" error code license

Not exactly the full error message I asked you to provide, but see http://support.microsoft.com/kb/306081 see method 2 (do a repair installation) (in http://support.microsoft.com/kb/914232)

Note: you need more than a disc of "boot".  You need a Windows XP installation CD, not a "recovery" OEM CD or a generic boot floppy.

I see no mention of fileexttogle.inf anywhere in your second post.  What was that all?

Tags: Windows

Similar Questions

  • What is unwanted inf

    What is unwanted inf

    Hello

    To add to the good information of aziz N.:

    INF file
    http://en.Wikipedia.org/wiki/INF_file

    Bing - INFs
    http://www.Bing.com/search?q=site%3Amicrosoft.com+INF+Files&QS=n&Form=QBLH&PQ=site%253Amicrosoft.com%2520inf%2520files&SC=8-28&SP=-1&SK=

    Google - INFs
    http://www.google.com/#sclient=psy-ab&hl=en&source=hp&q=site:microsoft.com+inf+files&psj=1&oq=site:microsoft.com+inf+files&aq=f&aqi=&aql=&gs_sm=3&gs_upl=9586l17899l0l18215l21l21l2l0l0l6l1287l5707l2.11.1.0.2.0.2.1l19l0&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=935a0bef009a2890&biw=1024&bih=713

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Qosmio X 770: Installation Question: driver laptopvideotogo

    Sorry, this is a newbie question. So I went to this laptopvideo2go site to download the latest driver for my X 770. Accompanying each driver is this .inf file.

    Apparently, we are called to install both.
    I downloaded the latest driver only and installed without any problems. I have not installed the .inf file.

    What is the .inf file for and WHAT happens if you install so?
    If I have to install it, how to do?

    Can I install the INF file first or the driver?

    Is it possible to just install the driver and ignore the inf file?
    heard of people having all kinds of problems with the INF mod. I use Windows 7 64-bit on a 770 X.

    just get the ones from nvidia (the new beta version), they work fine

  • Showing in the form of folder icon and cannot access network drive icon

    Hi team,

    The network drive that I drew in my computer using my profile isn't allowing me to access.

    The network drive icon shows as a folder icon and it says access denied even if I have the permissions to access the file on the server.

    The server we use is the exchange Server 2003.

    But I am able to access the files inside the drive using the Option RUN as well as Address bar in my computer.

    And I am able to access the folder on the server without any problem.

    The operating system I use is Windows XP.

    But it worked for someone else, when I deleted a file named autorun.inf in the folder of the shared drive on the server!

    Could you please tell me what is autorun.inf and he really causes this problem in the drive on the server or is there any other reason.

    Thanks in advance for the help.

    Hi Rani Jhansi,

    Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • Formerly peripheral usb stop recognized

    Can someone tell me what are the INF files are responsible for the generic recognition USB deviecs, such as USB hubs and the HID devices (keyboard, mouse,...), or what else might have broken into my system that causes the following symptoms?

    For a long time, my system has ceased to recognize some, but not all USB devices.  USB ports are fine, he reads the device descriptors but then said that material is unknown or says that it cannot find a driver for it.

    The second symptom that must have started at the same time, it is that he "forgets" on some USB devices that have always worked well before, with the same result: suddenly is 'unknown' or 'impossible to find a driver.

    Two weeks ago, it was my keyboard.  He has always worked when I logged in (it had, I used it my password).  Immediately after logging in, the new found hardware thing jumped upward, within a few seconds it says that it is impossible to install my new hardware, and at that time, my keyboard no longer works.  Never found a solution, I have been using a PS2 keyboard instead. I tried other USB keyboards, he did not identify any of them.

    Yesterday was my monitor's built-in USB hub that suddenly transformed into an 'unknown device', and nothing that I connect it is no longer detected. The only thing that is always good for now is as a power source to recharge my cell phone.

    To try to fix that, I launched the Device Manager and let him to search for new hardware.  Result: instead of my USB hub starts working again, my Logitech wireless mouse stopped working. The 'USB receiver' now appears with an exclamation point, "the drivers for this device are not installed.  It worked fine for a few seconds before.

    Now I'm back with a wired USB mouse, but I wonder how long it will continue to work.

    [Edit] Until someone suggests: I tried a few things that I found on the web as suggestions for similar problems.

    * Reinstalled the Intel chipset drivers.

    * In device manager, uninstalled all the USB controllers and let the system re - detect the.

    It changed nothing.

    [Edit 2] I still had a "Microsoft Wireless Intellimouse Explorer 2.0' (long name for a small thing) lying around.  The wireless receiver is always recognized, that's just the Logitech "unified receiver ' of my Logitech M510, which is not. It is not the receiver who is at fault: when I plug it in, it appears in device management with the right name and the device ID USB\VID_046D & PID_C52B & REV_1201 - USB\VID_046D & PID_C52B and status "the drivers for this device are not installed. (Code 28) ».

    * Fixed! *

    If we compare the %SystemRoot%\Inf contents to another system to Win7-64, I noticed this USB file. Missing info.  Copied to the system, the Device Manager started and re-installed drivers for non-working devices, and the problem is solved.
  • Autorun/autoplay in Windows 7 64 bit Home Premium edition

    Guys, please, please, please help me! I worked as a worm, trying to fix my autoplay in my computer! In any case, I have come back with history. Yes, I enabled the detection of shell service. Yes, I have AutoPlay enabled in the control panel. Yes, I've changed the two keys NoDriveTypeAutorun to 0, and it does not work, then back to 91 and still did not work. Yes, I restarted. Now, I have Flight Simulator x, and inside it is the autorun.inf file, it says that the AutoPlay window should show the FSX icon and the name of the renamed Flight Simulator x disc 1 disc and show the autorun.exe file. When I put it in my computer, however, the computer thinks it's a DVD image, and my options are to import pictures using Windows... Also, the FSX icon is not displayed, and the disc was not known to what the autorun.inf file says he is. I put the drive in another PC Windows 7 and it worked like a charm... FSX, FSX name icon and run autorun.exe right there on the AutoPlay. Why it does not work for me? I've tried everything! Thank you if you read all this.

    Here is a picture I took with Snipping tool: http://twitpic.com/5b9uws/full
    As you can see, the FSX icon is not there, and the disc has not been renamed... In addition, there are no files run Setup.exe or whatever it is called on the game.

    Hello... I fixed it. I went to http://www.sevenforums.com/tutorials/161443-autorun-inf-files-completely-block.html and downloaded entirely actiavte autorun to how it is supposed to be the registry key. And so it works now perfectly. Everything works like a charm, except my external hard drive, which is autorun file .ico image to turn the regular hard disk image into the computer for the WD logo. Maybe you can help me with this?

  • What is a MosChip program called pci ports. INF?

    I show this pci ports.inf file in my list of programs about ccleaner. I have not installed it to my knowledge what is? and can I remove it? running xp pro and ie8. Thank you.

    Which is for the PCI, based on serial port or parallel installation file Netmos product. NetMOS was later acquired by Moschip, so their names can be appear.

    If you have recently installed any PCI serial port/parallel, or some other hardware base that internally could use that, then you will get this file. Also if you already had this component in your system and updated the driver to use the latest update of windows, then also this driver will be highlighted recently.

    In my opinion, is not a dangerous file and you can continue to use it safely.

  • When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

    wic_x86_enu.exe

    When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

    I had already run the windown update, the problem remains.

    Please help.

    Thank you.

    Hi YongWaiMan,

    You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & see if you can download and run wic_x86_enu.exe.

    For more information, you can consult the following link.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Hope this information is useful.

  • What is supposed to be in \sources\inf\setup.cfg Windows 7 ISO?

    Hi all
    I have a Windows 7 Home Premium SP1 image - U 64-bit ISO downloaded from digitalriver and I removed the file ei.cfg with ei.cfg removal utility to make it universal.
    ISO changed did not work properly to install Windows, it just kept asking for drivers.
    After dipped in the extracted ISO files, I discovered something strange.
    In sources\inf, there is a file called setup.cfg. I opened with Notepad, and it showed as being random characters like those you get when your internet browser is not the same characters as the site coding.
    In my view, that a setup.cfg screwed up has something to do with my problem to ask for a cd/dvd driver before installing.
    Can someone tell me what text should be in this file setup.cfg so that I can manually edit and save on my bootable usb key?
    Another question: the product.ini in the sources (sources\product.ini) folder is empty.  I Googled it and people can find default key of product inside.  It must be something in mine?

    Hello

    I suggest you post your request in the below link:

    http://social.technet.Microsoft.com/forums/en-us/categories

    It may be useful

  • Receive the message 'the required in the INF section' what install Epson SX115

    I try to install my epson SX115 but the scanner will not install the drivers I just get "section in the inf file" Please help

    I'm sorry but I don't know more easy anyway. You have already uninstalled/reinstalled. Make sure you empty your temporary files after uninstallation and before reinstalling. CCleaner is a good tool to use for this - just don't use anythingexcept the cleaning part inside. Let alone register and advanced tools. The only alternative to those (or patch) is to talk to Epson tech support. I'm sorry that I wasn't able to help you. MS - MVP - Elephant Boy computers - don't panic!

  • I have a hp psc 2355 while a printer, when I want to print, right away don't worry nomore and clear the error usb inf need. what I'm doing. the whole system of printer does not work nomore... need to windows\inf\usb.inf

    I hope someone can help

    Visit the HP website and to see if updated drivers are available - if you have previously used winupdate to try drivers HP roll back the driver

  • I received the message that staller INF has an error several months on my vista powered PC. Is it necessary to fix this or can I just ignore it? What are the possible implications of major and minor?

    I am running Vista Business on a 32-bit system with 2 GB of memory and have had Live One Care about it since I first bought and implemented.

    http://social.Microsoft.com/forums/en/onecarestarttuneup/thread/9986269f-157A-43bf-85fc-3a2790716bd4

    Read the info at the link above.

    It seems to be a bug in Live One Care.

    You may want to uninstall Live One Care > change for Microsoft Security Essentials.

    http://www.Microsoft.com/Security_Essentials/

    Information on MSE at the link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Satellite 1900-303: biosinfo.inf failed or damaged BIOS after update

    I tried to update my bios now says:
    "windows was not start because the following file is missing or corrupt: \windows\inf\biosinfo.inf'.

    It's a satellite 1900-303... don't know what to do now.
    If anyone can help it would be much appreciated.

    Hello

    Please take a look at this document from Microsoft:
    Biosinfo.inf is missing or corrupted error message when you upgrade to Windows XP

    http://support.Microsoft.com/default.aspx?scid=kb;en-us;829784&product=winxp

    Maybe it will help you.

  • Satellite U500 - file INF with OpenCL, CUDA from Nvidia driver

    http://www.Megaupload.com/?d=K1BO17TB

    Inf file for g210m on toshiba u500 for beta 195,81 driver did.
    Just download driver and add it to the unzipped directory where are other INF files and install.

    You can now use Physx, OpenCL, CUDA, DirectCompute (enable in CP) and nVidia GPU acceleration for Adobe Flash Player (beta 2 flash drive install new 10.1 from adobe)

    This inf is optimized for DEV_0A74 & SUBSYS_FF401179 g210m.
    If you want to add me as more devices please post what devices you want and I will but you will have to test it.

    I hope this helps.

    Thanks for that, but usually it s advisable to use the Toshiba because the GPU graphics card driver, overheating protection.
    Other drivers don't support this protection and the use of these drivers can cause a higher temperature which could affect the GPU chip.

  • Should what Drivers I when reinstalling Windows 7?

    Hello.
    I intend to reinstall Windows 7 on a disk and use the product key printed on the sticker on the side of my PC to activate it.

    My computer is: HP Pavilion p6769sc

    Link to the drivers: http://h10025.www1.hp.com/ewfrf/wc/product?product=5062791 & cc = us & dlc = in & lang = to & lc = on & query = LG060EA

    (Click on drivers, and then select Windows 7 (64-bit).

    My question is, which of these drivers do I NEED?
    I see a few drivers who seem to support various programs of HP that I won't not after doing the clean install from the disc of Windows 7.

    Oh and also, I was in a new rather than provided with the computer graphics card. What makes me not sure if I will have 'Original NVIDIA Unified Graphics Driver' and 'Original Intel Graphics Driver'.

    Thanks in advance.

    I would like to begin by downloading the following drivers;

    Intel® Chipset Device Software (INF Update Utility)

    Intel® Rapid Storage Technology (Intel® RST) RAID driver

    Original driver Intel Management Engine Interface

    Driver NVidia GeForce 344.11

    Drivers for Realtek 10/100/1000 GBE PCIe

    Original Ralink Wireless Networking Controller Driver

    Drivers Realtek HD Audio CODEC

    After installing Windows 7, install the drivers in the order presented above. Make sure to restart the computer after the installation of the Intel Chipset Device Software. Peripheral report with the ID of Windows hardware for any remaining missing or unknown.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

Maybe you are looking for

  • HP Envy h8 - 1417c i7-3770 3.40: computer upgrade HP Envy

    Hi guys,. I have a HP Envy h8 - 1417c i7-3770 3,40 GHz standard. I want to get a new power SUPPLY and graphics card because I'm a great player.  I don't play HEAVY on my computer so I need around one of the best graphics card out there. And I think,

  • not enough storage for backup

    I s 6 more, 128 GB (not even near full... yet), iCloud is off (never use), and every morning for the past 3 weeks I've been doing the pop up that says that the phone could not be saved because there is not enough storage. When I touch the upgrade of

  • GPIB communication between two computers

    I try to communicate between two computers via GPIB. A computer to send an order, the other will receive, save and then respond accordingly. This response will then be received by the first computer and displays (this is the emulation of a device, th

  • Setting up a new router WRT54GL

    I just got a new wireless WRT54GL router to replace my faulty WRT54GS router and I have a question. He has been some time since I installed the old router and I remember something do not use the CD as it is said before connecting the new router becau

  • cannot debug on the last Simulator

    Windows 7: 10.0.10.261 SDK 10,261 Simulator Every time start to debug an application generated by the wizard got an error: Error in the final launch sequenceImpossible to prepare and upload the binary fileFailure of deployment: Info: request shipment