What is included when generating with version control on?

When you use the source control, it is possible to generate a presentation of unique source for an "older version"? For example I wrote documentation for a version of our product that must be released in a few days, but I don't want to not generate it in case of last minute changes. In the meantime, I want to continue to work on things for the next release. Is this possible? Or do what I have until I generate appear?
I use RH5 right now, but it can be upgraded if necessary.
Advertisement

Hi codesharing.

RoboHelp will generate output files that residents on your pc at the moment. At the time of the generation, HR does not check if the files are up-to-date or not; This happens when you open the project, not when you generate.

Where you're sitting right now, I'd be suspicious of continuous development that you want included in your immediate release. I consider two options to deal with this:
1. Add your new hardware, but apply tags to build it so that it is excluded from your version. You can remove the tags to build later.
2. in the alternative, to clone the project source files that are on your pc now. Keep a copy in a safe place like a copy of archive for your release. (It's probably a good idea in any case.) Place another copy in a new directory, and remove the control code source as follows:
a. delete the following files from the root of the project: mssccprj.scc, projectname.cpd, pblsvrs.sss and projectname.pss.
b. using Notepad, open projectname.xpj.
c. remove all entries between and , but let the two tags.
d. close Notepad, and then save the xpj file.
You now have a project that is removed from the source control. You can make final changes before your release in this version of the project and build from here. (Please note that these changes must also be added to your 'real' source controlled as well). At the same time, you can continue with new developments in your project under source control.

Theoretically, you should be able to label different versions of your project in the RSC. However, at this stage of the project, I doubt you want to experiment with it. I would go with one of the two options above.

I would certainly encourage store this copy archived your project for all milestone version, just for your own protection against the terrible influence of Murphy's law.

HTH,
G.

Tags: Adobe

Similar Questions

  • Assignment card ID when you use Version control

    Hello

    We use RH11 with version control (two of us were allowed to use HR) I am wanting to assign the ID card in our project. I created the card number, but when I assign to a topic, I get the following message.

    "Files in the list below may not be retrieved from version control. Exclusive access to these files is necessary to perform the selected action.
    The file in the list that refers to a the extension .ali

    Is this to say that because there are two of us with HR that can access the project that I can't do this? Or is it because of version control, I can't do this? I really don't understand why? I hope that there is an expert who can enlighten me!

    Thank you, Louise

    There are two reasons that this behavior occurs normally:

    1. The file is extracted by the other author. This occurs when you try to add a new id card at the same time. If the author of other controls throughout the project, you should be fine.
    2. The file is somehow outside the control of source code. In this scenario, your source control link has issues. Try to open the Source code control application to see what is happening.

    You can also try check all of the project, before you add the id of the card. Who help me?

  • LabVIEW with version control

    Hello

    I'm using LabVIEW with version control and only want to check the VI I need to change. If I changed a Subvi all screws directly or indrectly called this VI have recompiled and in order to save them, I need to check all screws are concerned. If I just extract the file, I need to change and to ignore the other screw recompiled the problem is if I use typedef ENUM and I want to still only got saved the VI automatically updated. Everyone runs on this problem?

    Thanks for the help!

    Kind regards

    Tom

    Tom,

    You can find what you need here: http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/saving_vis_compiled_code/

    Good luck

    Simon

  • What is the best plugin to version control for JDeveloper for SOA projects

    We are evaluating different products available for Version management.

    Is a criterion, what Version Jdev control works best with. I found site of Oracle which Jdev 10.1.3.x, the following plugins are available
    http://www.Oracle.com/technology/products/jdev/htdocs/partners/AddIns/Exchange/index1013.html

    Integration of subversion - integration with Subversion 1.3.1 and 1.3.2 Version management
    ClearCase integration - integration with Clearcase 2003.06.x Version management
    Serena Dimensions integration - integration with Serena Dimensions 9.1 Version management
    Perforce integration - integration with Version management necessarily 2005.1 and 2005.2
    The MS Server Integration - integration with Microsoft Team Server Version Management team

    Can anyone give feedback that is the best of them in terms of:

    1. effective integration with Jdev.
    2. ease of maintenance.
    3. help the deployment on multiple environments
    4. the other relevant points that should be considered.

    I would be grateful if someone could put light here.

    Rgds,
    Amit

    The forward direction is certainly Subversion to CVS. In the 10.1.3 days but there were a few things that you could do with CVS and JDeveloper with Subversion.
    This change in 11g - I would recommend that you go with 11g and Subversion.

  • What is meant when apps with complcations

    I see COMPLICATIONS on my watch with some applications. I have no idea what it means. Can someone explain what are the complications?

    Information from applications that are added to a watch dial - see: customize the face of your Apple Watch - Apple Support

  • RoboHelp6 and TFS Version control and to exclude files

    Hello RoboSource Control community members. I asked this question on the side of RoboHelp and receive no response so I think it's off-topic there and decided to ask here in the hope of getting help.  My team is using RoboHelp6 and Version control on TFS (Microsoft Visual Studio 2008 Team Explorer and Source Control Explorer). We continue running in problems where the changes, in particular, creation or deletion of a folder cause the damaged project and we have to fall back to an earlier correct version. We can also not make the main layout to generate under version control as it blocks of RoboHelp. I have been checking these forums and so far, that I discovered that since I loaded several files that should have been excluded, they can be part of my problem. The files I loaded and should exclude are (projectname.cpd, projectname.pss, projectname.hhp). So my question is this: if I reload the TFS with project and exclude these files (projectname.cpd, projectname.pss, projectname.hhp) that we will be able to generate the available main under version control or not allowed under version control. Another question to ask; before you reload the project is what other files should be excluded when loading? The list have so far is: projectname.cpd projectname.pss projectname.hhp projectname.trl ehlpdhtm.js

    Thank you, Bob (no relation to John)

    Hi Bob.

    Your list of exclusions is what RSC does with our projects RH6, except that ours isn't .trl files. Don't know what it is.

    G

  • Computer crashes when exporting with Adobe Media Encoder

    Hi, whenever I start to export via media Encoder, my computer kind of freezes... I am not able to change or even to use no matter what other applictions when exporting with Adobe media encoder. It didn't happen with the old version CC7. All advice please? Very frustrating.

    Hi Henen,

    Hi, whenever I start to export via media Encoder, my computer kind of freezes... I am not able to change or even to use no matter what other applictions when exporting with Adobe media encoder. It didn't happen with the old version CC7. All advice please? Very frustrating.

    Press SHIFT when you start the program. If this does not work, please contact support at this link: http://bit.ly/PPro-support

    Thank you

    Kevin

  • How to add the large number of RoboHelp docs to SharePoint version control

    I'm on RH11 and some versions of SharePoint, which I'm not sure. I am able to add a document to both HR SharePoint Versioning (file > Version control), but I must have about 49 000 with version control in RoboHelp.  I was able to get the files in SharePoint, but now I have to get RoboHelp to be managing the large number of files.

    How can I get RoboHelp to give version control a large number of documents at a time?

    Are - you're talking about individual files or projects? I guess that the individual, since 49 000 project files can be a bit heavy.

    If you add a project to version control, RoboHelp will add all the files in SharePoint. This will take a little time (set HR to add it before you go out for lunch or before going home). At the end of the day, you can check in the entire project in a single click. Or you see something else?

    You can still manipulate the files .apj of HR to very quickly add loads of files to a project. If you have files in SharePoint, you can update the FPJ files (use the following script: missing subject Fixer). Then remove the CPD and start the project.

  • No Version control under the file Menu command

    Version of program:  Adobe RoboHelp 8.0.2 / RoboSource Control 3.1

    Hello!

    I am very experienced with authoring in RoboHelp, but I'm trying to implement the version control for the first time and documentation (PDF version of the manual using Adobe RoboHelp 8, page 29, point 2) says "Choose file > Version Control > add to Version Control.

    I have not found a Version control on the file menu point, even if the menu was fully deployed.

    I found a toolbar icon that seemed to link to the command.

    It is not a big deal, because I could find the icon, but I have other problems with version control (which I will address in a separate post), and I wonder if there is something wrong with my software.  Everyone has the "Version Control" command in the file menu?

    Thank you!

    Andreah

    Hello

    Sometimes it takes to reset a menu. To do this, right click on your menu bar and choose Customize. This should be the tab toolbars at the front. If this is not the case, click it. Then make sure the highlight is on the menu bar. Click on the reset button. Dismiss all dialogs. It shows then?

    Here again, the Source code control is not my cup of witchcraft and I do not use it. So, I've never had a reason to pick up the order. Maybe it's just missing and the docs are wrong.

    See you soon... Rick

    Useful and practical links

    Wish to RoboHelp form/Bug report form

    Begin to learn RoboHelp HTML 7 or 8 days - $24.95!

    Adobe Certified RoboHelp HTML Training

    SorcerStone blog

    RoboHelp EBooks

  • What to do when my PC crashed with BOD and calls for a previous version of Windows?

    First of all thank you for all the help.

    I already posted this question in response to my previous thread but I don't know if everyone saw that since is a response.

    And now the sad news.
    I am currently typing this laptop for my wife because my PC is completely crushed.
    After being able to finally load these SPs and all my drivers and other software, it seemed that it worked.
    I always tried to avoid the automatic update because everything seemed ok.
    Whenever I have had more software installed on my pc I set up the new restore point.
    In fact twice because the third time I typed system3 and press ENTER to create the new restore point I had immediately the Blue Screen of Death that I'we heard about before.
    So I tried to re - install Windows again, but for the first time that I am not even able to do.
    He said: Windows didn't start because the following file is missing or corrupted \WINDOWS\SYSTEM32\CONFIG\SYSTEM
    Then he said to press r in the first screen to try to resolve what I did.
    With my original XP cd in, it took me for Windows set up where I faced another problem (new).
    He said: Setup cannot find a previous version of windows installed on your computer.
    He asked me to insert my original cd with NT, 95 or 98 on it.
    OK - I've upgraded from 98 years and I still have this start up par 3 1/2 98 but after moving so fast and technology upgrades for my Office Perrine drive seemed like the size of space.
    What are my options to resolve this problem?
    My HD could be fried?
    Couldit be some project of pirates or viruses?
    I 2HDs a C: 40giga.old Western digital that I had my Windows and second giga D: 120 which was more for backup and storage.
    After having all these problems I always C: formatted and reinstalled Windows but never really messed with my D: drive.
    Could there be something on D:, even after fresh Windows would keep jump on C:?
    Also why it asks me to insert the 98 now and not more recent before when I formatted and resettled C: windows.
    Once again thanks for your help.

    I have everything working fine now.

    Here is the link to which fixed my problem.
  • What does "PAGE_FAULT_IN_NON_PAGED_AREA" usually mean when associated with a BSOD?

    The question is in the title:
    That the following sentence usually means, when associated with a BSOD?
    "Failure of Page in the nonpaged area".
    Since the very little I know of free software, this would mean that a pointer memory was bad, it refers to a location memory wrong. Is it so?
    Thanks in advance,
    concerning

    Hello

    It was an accurate description of the BCCode: 50 error you encounter.

    Get rid of the RAID will probably do the trick. Good plan. However why we try to solve
    a problem on a computer you can is no longer trying to fix yourself?

    BCCode: 1st 0x0000001E

    Cause

    It is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes include:

    • 0 X 80000002: STATUS_DATATYPE_MISALIGNMENT

      An unaligned data reference was encountered.

    • 0 X 80000003: STATUS_BREAKPOINT

      A breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

    • 0XC0000005: STATUS_ACCESS_VIOLATION

      A memory access violation has occurred. (Parameter 4, verification of bug is the address to which the driver attempted to access.)

    For a complete list of exception codes, see the ntstatus.h file located in the directory Inc. of the Windows Driver Kit.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques. If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates. Try changing video cards. Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, this indicates that a breakpoint coded hard or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame will provide additional information.

    If you don't know the specific cause of the exception, the following should be considered:

    Hardware incompatibility. First of all, make sure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.

    Service system or driver faulty device. In addition, a chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, the service may be removed by the system startup by using the Recovery Console and by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help determine the device or driver responsible for control of bug 0x1E. Disable the cache in the BIOS memory could also resolve the error. You must also run hardware diagnostics, especially the scanner memory, provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is incompatibility of the system BIOS. BIOS problems can be solved by upgrading the version of the system BIOS.

    Good luck.

    Rob - bicycle - Mark Twain said it is good.

  • When generating layers it replaces spaces with underscores

    Hi all

    I'm working currently with RH8 and when I am saving projects and give the name, let's say "my file.chm" it replaces the space with an underscore, and the name became "my_file.chm." Is it possible to do something about it?

    Thank you

    I think what I said means that you can't generate with spaces.

    Bug? He did this for several versions and I think it's important if you're creating merged CHM Help.

    Submit a request for a bug or a feature change request according to your point of view.

    Please follow this link.

    http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform&product=38

    See www.grainge.org for creating tips and RoboHelp

    @petergrainge

  • When I go to control panel to set up parental controls, I gives me the options as to what I want to put in place controls

    When I click on the user that I want to put controls for, he's not raising access controls - for example I want to put in the time controls.

    Hi Paul,.

    What is the operating system installed on the computer?

    I suggest you to visit the links below and check if it helps.

    For Windows Vista;
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-can-I-control-with-parental-controls

    For Windows 7;
    http://Windows.Microsoft.com/en-us/Windows7/what-can-I-control-with-parental-controls

    Alternatively, you can follow the link below to learn more about Parental controls.
    http://Windows.Microsoft.com/en-us/Windows7/search?q=parental+controls&p=1&PRD=all

  • I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file.

    Original title: registry exe problem

    I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file. This also occurs when you download the software, which makes it difficult, because the file is not on the pc yet. All solutions?

    Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

    Microsoft has suggestions and offerings to

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

    Moderator Forum Keith has a few suggestions along this line to

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

    If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

    You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

    Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

    I hope this helps. Good luck.

  • HR 11 Version Control with Sharepoint do not restrict access to project; Only access section

    Help please. What I am doing wrong?

    We have RH11 and publish webhelp output. A member of the society gave me permission for a sharepoint site so I could implement version control, but we are having all sorts of problems. I'm not a sharepoint user, so I'm fumbling around in the dark. My experience of HR and Doc-To-Help version control is based on the use of a system that someone else has already created for me.

    I thought it would be easy and sold my team on the idea, but now members of the team are overwhelming each other all the time. We do not seem to lock a project so that no one else can edit/replace. We receive messages on a topic where we do not have permission to work on them, but we want the whole of the project should be blocked. Also, another Member of the team keeps opening files on a SharePoint site instead of from their local disk.

    Where detailed information about best practices for setting up and using the HR with SharePoint version control system? Are there options that I need to turn on or off? Are there options on the Sharepoint side, I should turn on or off? I need hand-holding more that I found - thank you!

    If I understand correctly, you want to lock the whole project and want to avoid overwriting one anothers changes, right?

    To block the project, click 'Check out all' on the Collaboration tab in the Ribbon. This will check out the entire project exclusively for you. So no one can make any changes.

    To overwrite the changes, this probably occurs because the authors exceeded versions on their desktop. The simplest way around this (particularly effective as you will check the entire project) is by definition 2 options:

    1. In the options under Version control, check the option always get the latest version of a project before opening. That way, whenever you open a project, you will always have the latest version and won't overwrite one anothers content.
    2. In options, select "Clear DTCS before opening project" to ensure that you'll nave have old stuff in your local cache.

Maybe you are looking for

  • This connection is not approved will appear in searches

    "This connection is not approved" window appears in all the research and when I click on Add - ons to find Add-ons. Ver.39.0.

  • Satellite A660 - 11 M & error during my recovery

    Hi all Two months ago, I bought A660 - 11 M. Two weeks, he started causing a problem starting I tried to fix it so far. During my own repair work, I accidentally jumped a recovery partition and boot was not possible at all. In the end, I had to buy C

  • When I click on OK in the media sharing dialog box nothing happens.

    What should I do when I'm trying to share the music and when I check the box for 'share my media' and leave the dialog box I can see the folders in my area of the network and access it from another computer but if I click OK nothing happens.  The onl

  • The update of the BIOS in the ThinkPad E330?

    Can you please update the BIOS of the ThinkPad E330. Utility to update the BIOS gives an error "Fail to initialize a flush. The utility is not complete. "Follow this guide http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/h3uj54ww.txt, but expos

  • Windows Mail SSL error ox800cccod.

    original title: ox800cccod When I want to use windows mail to send e-mail, the following error message appears: The host "SSL" is not found. Please check that you have entered the server name correctly. Are subject: RE: debit order 11 Manson Rd Newla