What is syswow64\mfc45.dat corrupt

Similar Questions

• With Internet connection sharing common data corruption

  I encounter the corruption of common data on all the machines on my network other than the host with ICS enabled on my connection by modem. Websites is scrambled characters, blocks and streaks everywhere are images, encrypted connections constantly throw error SSL and downloads fail are for control. The internet is virtually unusable on any of the computers on my network sharing the connection (a former windows xp box and my macbook pro). Everything works fine on the host machine however.

  I tried ICS with a clean install of Windows 7 and Vista SP2 - both suffer from the same problem. I tested with a 3g modem to dialup being the issue, and it has exactly the same problem with ICS. If I boot Windows XP Pro SP3 on the host computer and use it to ICS there is no data corruption, and everything works fine on machines in the network.

  The only thing that I could find the research was this thread with a few others encounter the same problem and no solution: http://www.tomshardware.com/forum/235878-44-random-data-corruption

  No third-party firewalls or anti-virus software. Tried with and without the Windows Firewall and Microsoft Security Essentials - no different.

  ipconfig/all on windows 7: http://janpingel.com/misc/files/ipconfig-w7.txt
  work xp ipconfig/all for comparison: http://janpingel.com/misc/files/ipconfig-xp-working-ics.txt
  network map: http://janpingel.com/misc/files/network.png

  Hi Janpingel,

  If the ICS works correctly with broadband, then there is a problem with the package with your dial-up access. You can test with another dial-up connection to see if the problem persists.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• What happens to the data on my iPhone and iPad, if I need to cancel my contract with O2?

  What happens to the data on my iPhone 5 and iPad if I have to cancel my contract with O2?

  I can't say for sure, but probably nothing will happen for her.  When my wife got a new iPhone, we disconnected his former service. We went there on a few months later and everything was still there, it just wouldn't connect a data plan or phone of course service. It has worked well for a wi - fi connection.

• What is the release date for Streets and Trips 2012/2013?

  What is the release date for Streets and Trips 2012/2013?

  Information about future product releases are usually announced through press conferences and other media.
  You can continue to monitor the Streets and Trips here site: http://www.microsoft.com/streets/en-us/default.aspx

• My after effects CC 2014 and 2015 cannot import the .obj files.  What's up mind dat?

  My after effects CC 2014 and 2015 cannot import the .obj files.  What's up mind dat?

  After Effects has never been able to import these files.

• LR CC 2015 6: running Mac Yosemite.  Data corruption problems.  What could be the cause?

  Hello

  I and running LR6 PS CC on a new MacPro with 16 GB of RAM.  My LR catalog is running on a matrix of RAID 1 external CalDigit Thunderbolt 2.  I've never had a problem with this Setup.  Recently upgraded to LR6 / PS CC 2015.

  
  

  During the labour day, I went on vacation and when I get back I loaded 277 images from my Nikon D810 out of my 64 GB SD SanDisk SDXC card in my LR 6 CC 2015 catalog.

  
  

  The next day, I tried to load the images on another machine from the SD card and received a message that card data has been altered. She also could no longer be read by my D810.

  
  

  I then opened LR 6 CC 2015 in order to examine the images that I had loaded the night before.  In library mode images not showing properly.  Thumbnails show with a display of the complete picture showing behind them!
  

  
  

  I took my MacPro at Apple, where they tested the machine to.  Video, hard drive, RAM and OS10 tested 100% OK. BUT the technician Apple DID find logs error that indicates a problem with LR6 CC 2015 at the dates and times that fit at the same time I noticed and problem... and even before.

  
  

  I got these error logs, but I have no idea what they mean.

  
  

  How can I get these Adobe to have analyzed them?

  
  

  Does anyone else have a problem?
  

  
  

  Thank you.

  Moved to the Lightroom forum for extra support.

• Data corruption FXP user variables

  Windows 7 Professional

  LabVIEW 2009 SP1, RT

  I have stumbled on this nasty problem yesterday and am looking for help (please).

  I used the scan engine and User Variables to send filtered data modules FPGA C Series in the OTR.

  When the fixed Point of Variables data user was read in the OTR, it was transformed using the primitive Double-precision Float.

  The result has been that positive were out correct but negative numbers has become corrupt.

   

  Other tests revealed the following:

   

  • This has occurred on the target of the RT, the target PC worked (tested and converted User Variables were published network)
  • This was produced for the User Variables (app 3 FXP representations and that have touched all of them) as a data source
  • If the data source has been a constant FXP then conversion to a DBL worked properly on the target of RT
  • If the data source has been probed or FXP control output, then the data is displayed correctly, it's the conversion only after the DBL occurred by corruption
  • Access to Variables such as a DBL using the shared Variable API via reading do not corrupt Variable data for the network publishes user read RT target Variables
  • Access to Variables such as FXP then convert to DBL using the API Variable shared via scanned reading corrupt the data read from the target RT
  • This was also the case for the simple primitive Float precision

  JG-code,

  The CAR has already been filed for this issue. What I will do, is to check that I can reproduce the problem with RIO 3.4 and update of the CAR in order to take account of the current situation.

• m6 desire specifications: recovery of pc - what happens to my data?

  I recently received a blue screen that says I need to use a recovery on my laptop of m6 disc want (m6-1225dx). If I do a recovery cd (I remember when buy the laptop it said that the recovery cd would be online), when I use it, will my data be intact or it will be deleted? It would be desirable to take the laptop to a professional to try to protect or recover my data?

  @williambell: this error message indicates that your BCD is corrupted.  You can fix that, WITHOUT having to completely restore your machine settings - and always keep all your data, settings, and applications.

  What works sometimes performs automatic repair: http://www.eightforums.com/tutorials/2843-automatic-repair-run-windows-8-a.html

• Data corrupted on Easy Transfer CD

  Hello, I'm running a problem trying to open my CD easy to transfer to my new computer. I put all the files from the old computer on several CD and now when I put the first disc in, Easy Transfer charges almost all of it but then I get this message: "there was an error reading the #1 media. The data could be corrupted.

  I can not simply ignore this CD and continue on the second disk car AND need the CDs to load in the order. Is that what I can do or is all of my info lost?

  Thanks for your help.

  Try cleaning the CD carefully with a soft cloth that will Center on board to make sure a task or fingerprint is not the cause of the problem.

  No, you can not ignore just the CD - they should be done in the same order that they were created.

  Check the process on another computer (selection temporary special folder as destination so that it will be easy to remove later) and see if it works.  If so, we know that it is probably a problem with the Vista machine.  If this isn't the case, it is probably a problem with the discs.  At least, we will have a better idea on how to address the problem.

  By chance, is the old yet workable PC and containing all the data, then you can try this again?

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What happens to my data if I reinstall windows 7

  my system does not work correctly, and I think that some of my windows got corrupted programs.  I think I need to reinstall windows 7 to fix the problem

  Hello

  The best safe method would be to always have redundant backups of your data. An Installation repair help - that allows to maintain the programs and data - maybe the last link below.

  You mean reinstall the OS completely? If you have the Windows 7 DVD you can do this however remember to completely backup your data off the drive and you need to reinstall your programs. If you don't have Windows 7 disks, you can buy them in your machine to cheap system. If you don't care about existing programs, then you can do a complete new installation - just select the format options that erases the entire disc (This erases all data as well). Some system manufacturers use Partitions of recovery as well as other methods to allow you to return to a completely new installation. So check with your system manufacturer to see what options you have to do - and it's certainly doable - just a matter of the manufacturer of the system processes in place for you.

  How can I perform a clean Installation of Windows?
  http://pcsupport.about.com/od/OperatingSystems/f/clean-install-Windows.htm

  How to do a clean install with Windows 7, this wipes ALL programs and data on
  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a Custom Installation of Windows 7
  http://www.SevenForums.com/tutorials/20146-custom-install-Windows-7-a.html

  How to do a clean install with a Windows 7 upgrade Version
  http://www.SevenForums.com/tutorials/31402-clean-install-upgrade-Windows-7-version.html

  How to do a upgrade install Inplace of Vista to Windows 7
  http://www.SevenForums.com/tutorials/1818-upgrade-install-Windows-7-a.html

  Installation and reinstallation of Windows 7 (upgrade - store programs and data or New Installation that removes them)
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ========================================

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary: a repair Installation allows to keep the programs and data, even if redundant backups are always a good idea.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Stores the data corrupted of VMFS - how causes?

  Hi all

  We run Lab Manager 4, so we still have ESXi 4.1 hosts in our infrastructure that we cannot upgrade to ESXi 5.x.

  In one of our sites, we regularly see corruption VMFS, where some virtual computer files can not be read/deleted/listed.  We are trying to add new storage and migrate our current VMs out of corrupted data stores, but I would like to know what is originally this corruption and how do I stop him from happening in the future?

  Hosts: HP DL360p G7

  Storage: HP P2000 G3

  ESXi: 4.1.0 build-260247

  If we see a lot of such errors, once restart us all hosts, the number decreases (for example 20 errors, we are left with only 3).

  Have you seen this topic on your site?

  Thank you

  Khare

  Examples:

  / vmfs/volumes/4 FC 87616-2a581cdc - 6 b 13-3cd92bee82a4/dirname # ls-l * >/dev/null

  LS: 10589/timA: invalid argument

  LS: 10589 /: invalid argument

  LS: 10589.

  : Invalid argument

  LS: 10589 /: invalid argument

  LS: 10589 /: invalid argument

  LS: 10589.

  nvalid argument

  LS: 11843/IHDR: invalid argument

  LS: 11843/e: invalid argument

  LS: 11941/n = "1.0"? >

  < Foundry >

  < VM >

  < VMId type = "string" > 52 32 c9 78 f5 47 6 c - 03 ba 14 18 2d 42 e4 d9 c6 < / VMId >

  < ClientMetaData >

  < clientMeta: no such file or directory

  LS: 11941/are/>

  < HistoryEventList / > < / ClientMetaData >

  < vmxPathName type = "string" > 017695 - Central1.vmx < / vmxPathName > < /VM > < / Foundry >

  : No such file or directory

  LS: 12351/IHDR: invalid argument

  LS: 12351/e: invalid argument

  LS: 12478/012478-12478-2k8-Central.vmx.LMBackup: no such file or directory

  LS: 12478/012478-12478-2k8-Central.vmx.LMBackup: no such file or directory

  LS: 7600/IHDR: invalid argument

  LS: 7600/YJ) U. N6 "¢ ªyc, zo!" I.y.s.: invalid argument

  LS: 9251/009251 - VirtualRouter_C2796F3338_DoNotModify.vmxf: no such file or directory

  LS: 9251/009251 - VirtualRouter_C2796F3338_DoNotModify.vmxf: no such file or directory

  LS: 9251/009251 - VirtualRouter_C2796F3338_DoNotModify.vmsd: no such file or directory

  LS: 9618/IHDR: invalid argument

  Since the upgrade of the firmware on our storage - HP P2000 - we did not have errors or problems.  Seems that this problem is corrected.

  Khare

• TDMS data corrupted %2C puree in a channel

  Hello

  I wonder if there is someone who can cut the corrupted entries from PDM?

  There is a continuous measurement with connecting PDM. The measures. the software is in LV 2012.

  On a very rare occasion (I suspect some antivirus locking) the PDM is corrupt, but who wrote (not the cluster error) in the file in the following sequence:

  

  When the file is opened after the measurement, only the first entries of data x are shown. (A legacy text output shows all the data). Tiara and the native VI to look a PDM show to the rest of the data in a channel (called OutputIndex below).

  

  Import Excel returns the code (-2503) (not a CT file or similar). TDMS defragment returns the same thing. Open and close screw return no error.

  I shrugged the PDM here: ftp://ftp.ni.com/incoming/vojtest28.tdms

  Thank you

  c.

  Except the error handling and opening, closure of the DDHN th file code looks ok. So, let me know if change you for records to help offset. You can management of errors on the end of the loop - if an error occurs just stop the loop for or something like that.

  In my opinion most probably because of corrupted files are opening and closing of each iteration file... If you can not change it, maybe try adding some wait function in the loop? Start from high values (100 ms) and lowest and see if the error still occurs. It's a job autour, but if you are unable to change opening and closing it is my only idea for the moment...

  If you can, thanks to uploader the tdms file even once, because I can not download it, I don't know why.

  And the last is my little advice try to keep the wires as directly as possible - especially in this case a simple as wire error en on the beginning of the loop: you're going down with the cable, enter the case structure, reenter the loop, then place, why not put it directly? It is always easier to debug and read such a code.

  Best regards

• What are the motherboard data transfer rate on a HP G60 - 243CL?

  I bought my laptop HP G60 - 243CL of Costco 3 years ago and continues to function perfectly. Since then I have maxed out the 320 Gig HARD drive. A few days ago, I transferred all my multimedia files of a terabyte of 1.5 external HDD. I also removed and uninstalled all the software that didn't come with the laptop pre-installed. I ran the Disk Cleaner to delete the temporary files... etc. I left pretty much the State of Out-Of-The-Box laptop... I also ran the Windows disk defragmentation application.  Although it has all updates from Windows Update. I doubt that the above mentioned is relevant to my question. The laptop came with two modules of RAM PC2-5300... a 1 Gig and 2 Gig. I replaced both with two sticks of modules/memory 2 GB PC2 - 6400. Other that this hardware upgrade, I've also upgraded to Windows 7 Ultimate edition 64-bit. Now, I am also considering upgrading to an SSD HARD drive. I have of course read/write speeds rise as SSD memory ability increases (depending on model)... for ex: there is a huge difference in the rate of data transfer speeds in a 32 Gig SSD compared to a 256 GB SSD. At least that's what I noticed. I want to install a Gig of CRUCIAL 512 or possibly a CRUCIAL 256 GB SSD. Read/write speeds are respectively of 500 MB/s and 260 MB/s, or 230 MB/sec and 190 MB/s (again, depending on the model). My question is noticed in the SUBJECT field. Can you please help me make a wise decision? I wish that more technical details as possible. Thanks... :-)

  This laptop is equipped with SATA I, which is 150Gbit/s. You will not reach the maximum speed of your SSD, but it will be much faster then your current old school disc spinner. An SSD will always exceed a normal HARD drive. In addition, you should see a bump in battery life as well.

  I hope this helps!
  Sean

• What is the expiration date of my HP 02 ink series

  I bought 6 cartridges of series 02 HP who are new not opened (but not in original box) off Ebay and I was told that they expire in two years.  How will I know, figures on these cartridges if they left 2 years?  Here are some of the numbers, if someone can tell me what they mean.  Thank you-

  HP CB283W product

  081105.00:51:33

  ID 0510 Y32 B

  HP CB279W product

  090911.18:27:18

  ID 0311 Y3 2G

  HP CB284W product

  081031.11:49:17

  ID 0410 Y32 C

  hayesa7173 wrote:

  I bought 6 cartridges of series 02 HP who are new not opened (but not in original box) off Ebay and I was told that they expire in two years.  How will I know, figures on these cartridges if they left 2 years?  Here are some of the numbers, if someone can tell me what they mean.  Thank you-

  HP CB283W product

  081105.00:51:33

  ID 0510 Y32 B

  The date is the 081105 which is the date of end of warranty in YYYYMMDD form as below.

  The date "install by" should normally be 6 months before the warranty expires date.  I do not see the specifications for the expiration of the 02 cartridge, but generally it is a function of when the cartridges are installed.  It would seem that the expiry is a maximum of 25 months from the installation date, but this can be reduced if the installation occurs after installation 'by date '.  I have a Photosmart 3210 here and all the cartridges have been installed before the expiration of the warranty, so I can't say my dates how would affect the expiry of the ink.  I have a few cartridges installed with expiration date approximately one year after the date of warranty.

• What is Western Digital Data LifeGuard Diagnostics?

  Friends-

  I noted in my start/programs, a new piece of software has been added to the list, and I needed to install it. It is called Western Digital Data LifeGuard Diagnostics. I don't know where it comes from, so I guess it's an auto-update from Ms. The problem is that when I Googled it and it raised online on Microsoft.com, all references were too opaque for me to grasp what, exactly, does it.

  Its own pages of support, he said that "it is a version of Windows Data LifeGuard Diagnostics. It will test the internal and external WD drives. In additional, it can provide you with the model and series of WD drives attached to the system. "Huh? Why would I want or need this information?

  I am wary of what he is and does (quite thin on explanation there), but there seems to be so many things about it that I am comfortable, considering that it is not a scam/spam. The problem is, where he comes and what benefit can it give me? Sorry if I am too a novice on this, but I have never heard of him.

  Any information would be welcome. Thank you.

  Hello MDBoy,

  From an internet search, Western Digital Data LifeGuard Diagnostics is a program that performs hard drive diagnostics.

  The utility can make identification of the drive, diagnostics and repairs on a Western Digital FireWire, USB or EIDE drive. In addition, it can provide you the series and model of the player numbers.

  In addition, there is a feature called write zeros: this option can be used to clear the operating systems and file systems.

  So if you do not install this software, I would say you uninstall and remove this diagnostic software. You can go into Control Panel, click programs and features. Western Digital Data LifeGuard Diagnostics must be there. There is a column it installed on. This will give you the date, that the software has been installed, then it can give you a clue.

  Thank you

  Marilyn