What is the best configuration for stereoscopic editing in Premiere Pro cc 2015?

Similar Questions

• What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  Any help would be greatly appreciated! Thank you

  Under the H.264 are several presets for ipad.

  Experiment with those.

  http://www.Apple.com/iPad/specs/

  Looks like me 720 p is the largest export format.

• What is the best laptop for video editing that task my money?

  Hello

  I have Lenovo laptop, I used it for 5 years, until now, I see that it is not good enough to make the work of video editing. So now I think to buy a new laptop for this case, but I am not confident about my knowledge on the area of the laptop. Everyone here knows or has a good knowledge on laptop, please give me a serious opinion, thank you.

  Hi jespong,

  Thanks for posting.

  The first starting point would be to look at the minimum specifications required by the video editing program, and then start looking for laptops with these specifications.  Then look for those that have the best specifications requested by the program and settle for something in between.

  According to your budget, it would be better to buy something that has more than request the program you always want to have the best.

  Kind regards

  Robert

• What is the best browser for incontext editing

  Hi all

  What browser on a PC that you would recommend for incontext editing?

  Thanks much for any info

  Martin

  Hi Martin,

  Any current browser is recommended and should work just fine.

  Kind regards

  -Sidney

• LAPN300 - the best configuration for 3 access points, while using the same SSID

  Hi all

  What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?

  I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.

  What do you think? What is the best way or do, or could suggest you something else?

  As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network?  Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature?  Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?

  I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.

  Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.

  Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.

• What is the best way for foglight consume a webservice

  I hope that this is has not been replied that a bazillion times and if it is please send me the link I'm open to that.  What is the best way for foglight consume a Web service and respond with an alarm if the response from the Web service is not what is expexted.

  for example, calls Foglight webservice to acme.com/areuup and he responds with correct status in json format process.  If it does agree return, then foglight must send alerts to correct individuals.

  Thank you

  Kaleb

  in the end, we have used a perl script to capture the webservice and treat it and tables configuration.  Here is what has been written and created an agent custom.

  I apologize to all those who find the bulky comments, but it's my edition of journal of the script. I removed the comments once the script has been published and used.

  ===

  #! / usr/bin/perl

  #############################################################

  # Author: Kaleb J. Albee

  # Depandancies: SOA webservice

  # Engineers: Marc and Manu

  # Date: 28/02/2013 perl: (v5.14.2) built for x86_64-linux-gnu-thread-multi

  # Operating system: Linux 3.2.0 - 29-generic eam-ops-test #46 - Ubuntu SMP Wed Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  #############################################################

  use strict;

  use warnings;

  use Try::Tiny;

  use SOAP::Lite;

  use SOAP::WSDL;

  Use Time::Local;

  My = @soaenvs ('BSE - dev', 'BSE test', 'BSE-scene', 'BSE');

  # parameters: $_ [0] receives a call of SOAP client object.

  #

  void toStr {return $_ [0] == 1?} 'up': 'down' ;}

  void getBusResults {}

  # $_ [0] will be the $client spent

  # create a different buses SOAP connection.

  my $result = $_ [0]-> (getMessagingEngineHealth)

  # arg0 is used to set the setting for what is expected on the soa web service.

  SOAP::Data-> name (arg0 => $_ [1]));

  # $_ [1] will be the bus happened in

  return (Lk ($result) "started" eq? 1: 0);

  #return $result;

  }

  # Start sampling.

  My $curTimeStamp = "";

  my $count = 0;

  Print "LdsEsbBusHealth5\nSTART_SAMPLE_PERIOD\n TABLE";

  foreach my {$soae (@soaenvs)

  my $client is SOAP::Lite-> service ("put the url of the webservice here.");.

  $count ++;

  # create an object to inspect objects. My $insp = Data new::Inspect->; Download the time stamp for this.

  my ($sec, $min, $hr, $day, $mon, $year) = localtime;

  # format the year correctly for useage.

  My $curyear = 1900 + $year;

  # the hand to the fglam agent fields at the tables.

  My $soacei = getBusResults ($client, "messaging.000 - CEI.esb.BUS");

  My $soaapp = getBusResults ($client, "messaging.000 - SCA.APPLICATION.esb.Bus");

  My $soasys = getBusResults ($client, "messaging.000 - SCA.SYSTEM.esb.Bus");

  $curTimeStamp = ' $curyear$ MON$ day$ hr$ min$ s ";

  Print "SoaEnv.String.id=$soae\n";

  Print "CeiBusNum = $soacei\n";

  Print "AppBusNum = $soaapp\n";

  Print "SysBusNum = $soasys\n";

  Print "CeiBusStr.StringObservation.obs =". toStr ($soacei). "\n";

  Print "AppBusStr.StringObservation.obs =". toStr ($soaapp). "\n";

  Print "SysBusStr.StringObservation.obs =". toStr ($soasys). "\n";

  Print "Daterun.StringObservation.obs=$curTimeStamp\n";

  If ($count<=>

  Print ("NEXT_SAMPLE\n");

  }

  } {$soae foreach (@soaenvs) #.

  Print "END_TABLE\n";

  Exit 0;

  ===

  I hope this helps someone out there!

  Bravo!

• What is the best workflow for longer projects with music?

  Hello. I'm just getting into after effects and WOW, I soak every tutorial I can. That being said, I wonder what's the best practice for working with longer projects. Let me give you a scenario.

  So, I have my HAND COMP with piece of music in 3 minutes I sync up to my animations.

  I create ANIMATION COMP 1 and drop it in the HAND COMP.

  So let's say that I want to adjust something in ANIMATION COMP 1.

  I switch back to ANIMATION COMP 1 window to make my adjustments.

  Problem: Bed of music is in comp 1 so I can't listen to music and make adjustments accordingly.

  The obvious solution is to simply create everything on 1 composition. But is there a way to make the MAIN COMP room if you change a secondary layout?

  Thank you

  The only sensible thing to do for a few minutes longer project to edit in Premiere Pro and make the moves you must treat as individual comps in After Effects. Comps are for the creation of pictures and short clips. Try to put 80 or 100 cups in a single cimp is not only difficult to treat, but finding the flow with the music of changes are almost impossible.

  If you want to get a real specific on all your production must begin before a single frame is shot. Shot a bunch of stuff and try to build something later are a very very bad idea unless there is no other choice. I did a lot of musical projects him more than 45 years in the business and even if you can't draw, just block storyboards will save you a lot of time.

  I hope this helps. If you remember that make you plans in an EA and you had it first and you mix sound in addition, you will be in good shape.

• DPS: Judge to use the parameter Raster or vector in the States of the objects when the majority of the page is a photo. What is the best setting for the overall performance?

  I am trying to decide whether to use the parameter Raster or vector in the States of the object when the majority of the screen is a picture (with a modest but important legend for children to read). The legend certainly makes it look more net as vector. But does the photo! The raster setting seems to make the lower-res images in comparison. In my first edition of my application, I thought that raster would be the best setting when the photo was the subject dominating the page. But now, after seeing how strong he looks like vector, (but with almost a refresh of the unacceptable time. Perhaps better on the latest iPad. Most of my readers/students in class will use iPad 2 s, which has a slower processor). I wonder if I should go through the trouble of changing States of photo objects that have the type as well to the vector. It doesn't seem to be as sensitive to a re - draw on the iPad 2 (non-retine)

  Is Filesize hit if I make about 1200 on these objects range from Raster to vector? (It is a huge, highly interactive history book, so I'm curious if acutally go to vector on these photos would reduce the size of the file) What is the best setting for the overall performance?

  I see the freeks screen outside for a bit if you try to pinch and zoom in a vector object (photo) vs raster. Which is disappointing. Does slow down load time/refreshment in frame, which is a little less. I also found that the drop shadows really bad that redraws effect in vector, almost vibrating in a slide show, for example. Thus, in cases where I need shadows, I'm sticking with Raster.

  All tips go ahead?

  Brian

  Does that help? http://boblevine.us/Digital-Publishing-Suite-101-keep-text-sharp-in-raster-slideshows/

• What is the best practice for a 'regular' Server VMware and VDI environment?

  What is the best practice for a "regular" VMware Server and VDI environment?   A single environment (ESXi and SAN) can accommodate two if it is a whole new configuration?  Or even better to keep separate?

  Enjoying inputs.

  Quick and dirty answer is that "it depends."

  serioulsy, it depends really two things budget and IO.  If you had the money for two without then buy two and don't have to host your server environment and the other for VDI desktop, their IO profiles are completely different.

  If this is not the case, try to keep each type of use for their own dedicated LUN.

• What is the best configuration of network with 4 NICs (2 x 10GB and 2 x 1 GB)

  I have 4 hosts running ESXi 4 Enterprise license with 2 x 10GB and NIC 2 x 1 GB, what is the best configuration of network to be used in this configuration? where FT logging should go? I can't add NICs more because it is on the HP blades.

  It's my current setup:

  

  Thank you

  Dan

  You talk about the c3000 blade enclosure, aren't you?

  For a solution tolerant when disaster strikes, you will go probably with:

  VSwitch0 has.)

  Physical NIC: vmnic0 (1 Gbps) + vmnic2 (10 GB/s)

  (A.1) VMkernel Port Group (network management)

  vmnic0 = standby

  vmnic2 = active

  (A.2) VMkernel Port Group (Vmotion)

  vmnic0 = active

  vmnic2 = standby

  Networks of Virtual Machine A.3)

  vmnic0 = standby

  vmnic2 = active

  VSwitch1 B.)

  Physical NIC: vmnic0 (1 Gbps) + vmnic3 (10 GB/s)

  (B.1) VMkernel Port Group (Fault Tolerance)

  vmnic1 = standby

  vmnic3 = active

  -Default - VMware uses round robin to assign a virtual computer to one vmnic.

  So you don't configure port aggregating on the switches.

  You can, however, traffic using if possible VIRTUAL networks, this is why you must configure the ports as junction ports.

  André

• What are the best options for the composition of math in InDesign CS4?

  What are the best options for the composition of math in InDesign CS4?

  I tried a few versions of the composition of mathematics test. All have their advantages and disadvantages, but I can't decide on which the plugin/script will be the best in the long run (in taking account of the ePub and MathML).

  
  So far the two best seems to be InMath (if it becomes compatible CS4) or Math + Magic Pro.

  
  The biggest pro of InMath is editable on the screen, but it seems to have some risk: http://InDesignSecrets.com/InMath-update-with-new-reader-functionality.php

  
  Math + Magic Pro works well with CS4, but need of equations to modify in the window of their plugin, and because they are EPS format. The file size and the ability to work with a digital player disappeared.

  And MathType seems pretty useless...

  Someone at - it had positive experiences?

  Not exactly the kerning, but you can move blocks wherever you want with the arrow keys. And you can change the spacing between the elements by changing the spacer between them. There are also defects of spacing.

  Batch edit can be something again. I use 6.0, and I see that the most recent version is 6.5.

  I had problems with files EPS of Mathtype, which may include a preview, but do not include fonts. So, I opened each equation of the word with my default settings (they automatically change the default fonts, spacing, size, etc.), copy, paste in Illustrator and save as have. So when I'm finished, my equations are always vector (if that's what you mean by text).

  Microsoft has chosen to implement a version of Mathtype dumbed-down as the editor of Word equations for many years. So for me at least, long term has already been decided. There are several things wrong with Mathtype, but given the choice between the use of Mathtype to * convert * equations and using InMath or mathemagiques to * recreate * equations, I'll take Mathtype, warts and all.

  Ken Benson

• What is the best OS for a late 2008?

  What is the best OS for a late 2008?

  El Capitan.  He will run the latest apps and have the latest safety features.

  Do not install the maximum RAM that your model will accept (best sources RAM compatible Macs are OWC and Crucial).  If the bank account is fat, install an SSD (Crucial and OWC SSD are recommended).

  Ciao.

• What is the best SSD for a mid 2010 17 "macbook pro?

  What is the best SSD for a mid 2010 17 "macbook pro?

  It depends of what your budget and how much Go looking

• What is the best OS for Macbook pro 13.3 mid-2010

  What is the best OS for Macbook pro 13.3 mid-2010.

  I am currently using OS X El captian and it's extremelly slow. Please tell us which is the best OS for her to be able to function properly.

  Thank you very much

  specifications:

  2.4 GHz Intel Core 2 Duo

  4 GB 1067 MHz DDR3

  NVIDIA GeForce 320M 256 MB

  The Snow Leopard is one of the more stable OS Ive ever used, but you won't have a lot of features.  Mavericks is in the Middle, has more features and is always quite stable. I would, however, try to reinstall El Capitan, or deleting some files to free up space.

  See you soon,.

  Adam

• What is the best vpn for OS 10

  What is the best VPN for my MacBook Pro running Yosemite

  The question is really not much sense.

  A VPN is not something that you install on a computer. It's a service that you connect to, as such, there is no better for a specific type of computer.

  What exactly you need to accomplish with a VPN?

  Usually, a VPN is used to connect to a remote network and use its resources, such as printers and servers, as if you were connected locally to them.