What is the best way to connect the pipes to Labview? DDE or OPC

Similar Questions

• Best way to connect my computer to computer outside

  What is the best way to connect to my server from 14 Filemaker from an outside computer.  Both computers to run OS10.11.  Team Viewer is the only way I just need to do one or two weeks a year, in order to access the program.

  You can use any service remote desktop, such as VNC, Apple Remote Desktop, etc.

• best way to connect two PC 2748 s?

  I just upgraded our office in two PC 2748 s (while still also using one of our PC 2324 devices) and I would like to know the best way to connect these three switches.

  At the present time, I have a cord Ethernet connecting each of the 2748 s via the 49 port and then another cord ethernet connecting the 2324 to the 50 of my first 2748 port (which has our main file server and the outgoing Internet connection on it, among other things).

  Should I also connect the 2324 to SECOND 2748 or is asking for disaster? Also, is there an advantage to invest in GBIC modules for the two 2748 s so that I can connect this way or this advantage of flow occurs only when connecting a 2748 to another device (i.e. There is no speed advantage when only connecting two 2748 s together)?

  Thanks in advance for your clarification...

  
  

• What is the best way to connect my iPad Air to my hifi amp?

  I'm wanting to connect my iPad Air to my hifi amp and want to know what is the best method, I am currently using a headset taking racial RCA connection.

  Music compressed on an iPad is not designed to be played on a stereo. It was the first question I asked when I got my iPad.

  You can use bluetooth speakers, it allows to be systems for iPhones from and now you can play music Apple on Sonos.See link below. for the Forum.

  Apple music on Sonos

• The best way to connect 2 the application of ADF database servers?

  Until merge us the databases, I have a situation where I need to connect and to interview the two different databases. If the number of declaration is < 9 digits, use DBConn1, otherwise use DBConn2.
  
  I thought to use two modules of the application, but how would pass between the two connections in the code, let's say, a command button from the user interface with links?
  
  Is this possible at all?
  
  Thank you
  
  John

  In any case, you will need different display objects to query different data.

  The easy thing would be for create you to choose a database as the main one and in this database, DB links to the database. Then create a synonym for the table in the database, and then build your second view object against the synonym for the link to the DB.

  It is the best way to achieve your goal.

• Satellite M30: best way to connect to STEREO to listen to music

  What is the best way to export the music to an external stereo installation (by which the port or the connection output device)? Do I need devices additional periferal?

  Hello

  I use the small audio adapter like this one http://www.audiogear.com/cgi-bin/shopper.cgi?key=Adpt2Rf-Mnsp&preadd=action. The HIfI has generally to THE free line. This line, you can use to listen to music.

  It's also nice when I play games. I like it a lot.

  Good bye

• What is the best way to connect the Xoom to a desktop monitor?

  I would like to power mirror my screen xoom on a desktop monitor for presentations by small group to the site.  I've seen some of the threads on hdmi to vga, hdmi/DVI and hdmi to hdmi, but I'm a little confused as to what is easier.  It seems that if you go with hdmi to vga you will need some type of converter, not just a cable?  If it was just a cable that would be perfect.  In addition, another option would be to hdmi for display port (published in December 2010), has anyone tried this? Thank you!

  @uberpixels,

  I think the easiest way is using a HDMI output on the Xoom to an HDMI-> DVI Cable. or HDMI-> VGA Cable. I use an adapter at right angles (adjusted to avoid breaking), HDMI port which offers a complete female HDMI.

  Here's the thread on this adapter:

  https://supportforums.Motorola.com/message/401234#401234

  Then, connect a HDMI-> DVI Cable for the monitor. If you want to copy to VGA, you may need to add the + 5V using the applicator of tension mentioned in this thread:

  https://supportforums.Motorola.com/message/414527?TSTART=0#414527

  I have a portable DLP I use with the Xoom and choose to use a small HDMI-> VGA Converter that meets my needs. Here's a thread on this configuration:

  https://supportforums.Motorola.com/message/375995#375995

  -Doc

• What is the best way to connect the two interactive reports?

  Hello
  
  =================
  Set of bottom-up
  =================
  I created two interactive reports - report on the project on the project page and report of tasks in a task.
  Project report on the project page can contain several projects.
  Report of the tasks in a task can contain several tasks.
  A project can have several tasks.
  But a task can have only one project.
  
  
  =================
  What I'm trying to reach
  =================
  When I click on a project name, it must pass The ID of project of work page and view jobs that are established for the project.
  When I create a new task, past project ID must be mapped to the task.
  
  
  =================
  Challenges
  =================
  1. How can I pass Project ID of the project page on the task page while clicking on the project name in the project page ?
  2. How can I get the project name in the page of work based on the project ID goes from the project page ?
  3. How can I view jobs related to the name of the project ?
  4. How can I take project ID passed to the task page and map it to a new task?
  
  Thank you
  Guy

  1. How can I pass project page ID of the project to the task page while clicking on the project name in the project page?

  Create point hidden in a task, for example: P2_PROJECT_ID. That the link on the column to the task page:
  Interactive report-> column change-> link.

  2. How can I get the project name in a task based on the project ID password page of the project?

  There are two ways you can create a function that will return the name of the project by id or you can post the name of the project to the task page (the second way is dangerous, you can miss some parts of your project name if you have a symbol ',')

  3. How can I view the tasks on behalf of the project?

  In the interactive report source add condition to your query, for example:
  and task_table.project_id =: P2_PROJECT_ID

• What is the best way to connect a time capsule from the airport to an existing dsl router?

  I have a Netgear D6300 router with built-in ADSL modem and I'm getting a time capsule from the airport. I thought to put the D6300 in Bridge mode and connect the TC via a ethernet cable but my netgear router is kept in a metal TV armoire or I asked myself if I put on the floor and used to extend my existing wireless which is a little spotty on the floor, but I didn't know if the connection on the hard drive would be too slow. However I read in another post is no longer that apple supports the extension of networks of "no apple"?

  The time Capsule will connect to the Netgear router using a wired Ethernet cable connection, permanent... no matter how you decide to configure things.

  Regarding the location, Time Capsule can be located just about anywhere that it will allow an Ethernet connection. If you want to time Capsule to "extend" the wireless Netgear, and then configure the time Capsule to create a new wireless network that uses the exact same wireless network name and password than the Netgear router. The result will be a network of 'big '.

  Should be a lot more work, but assuming that the Netgear gateway can be configured to work as only a simple modem, the Capsule can be configured as the primary network router.

• How is the best way to connect the configuration of my router and switch?

  I have a cable modem. connect to a switch, I have 2 computers connected to the switch. I also just connected my router wireless switch. That's the best configuration or I lose my firewall of the router in passing is not by ports directly above?

  Most of the cable modems will give an IP address, so connect a switch to the modem and then connection of two computers and a router to the switch will usually result in one of these three devices, get an IP address (and internet connection), while the other two will not be.  (Notice that I guess a true "Modem" and not a "Modem/Router" device).  The correct configuration would be to connect your router to the modem (router gets the unique IP address).  The router can then process from the addresses IP what either side LAN of the router, then plug the devices you need (including switch) to the router's LAN ports.  This also ensures that all devices will be on the same subnet that your connection scheme to separate devices on the router wireless from the other two devices on the switch (here, assuming that you have a router/Modem device).

  HTH,

  JW

• What is a secure way to connect devices through the internet by using the credentials of the AD?

  I want everyone to connect devices using their company user names that are stored in Active Directory. RADIUS does not help because the credentials are not sent encrypted. What are some options for encryption of the credentials you travel a router to AD?

  RADIUS crypt passwords.

  GANYMEDE + encrypts the credentials, and then some.

  Reference.

• Best way to connect several hard disks

  HI - since getting my new Mac Pro, I worked with two hard drives of 12 to promised Pegasus 2 Raid-5.  They have been great.  But my video player started to get crazy and so I bought two backup drives WD - 8 to, one to save the key on each PP2 files.  Unfortunately, it was too late to save the video player, as one of the bays failed.  Because it's Raid-5 and with the amazing and patient Vincent promise eSupport, I replaced the failed drive Bay and am now waiting while he rebuilds (if all goes well, without any loss of data).  Then it will get saved.

  Until it became clear that a bad drive Bay was probably underlying computer freezing, loss of images in video playback, etc., I was wondering if there was some sort of best practices for fixing of external drives.  With Thunderbolt, you can chain; But what to what?  Is there a limit any?  Can I plug two disks promise, then the one closest to you on the computer?  Must the WDs be connected in the same way, each to each, and the other to the computer?  Should there be just a Garland of four disks?   ????   In the old days, you had to look at how much energy was used during the USB and Firewire connection, but the true even for love at first sight?

  Surely you'd be recognizing any indication on how best to connect several hard disks.

  Thank you!

  There are 3 unique bus in the Mac Pro black cylinder. Better reactivity is with your readers spread between three buses, keeping in mind that video display takes nearly half a ThunderBolt Bus itself.

  You can use USB-3 for your backup drives - just keep in mind, it is only a sufficient bandwidth behind the USB to operate a chain of reading and writing of full tilt. If you simultaneously use devices more than that, you can start to see some cuts of your maximum transfer rate.

• What is the differene between labview 6.1 and 2009

  someone is selling labview 6.1 without opening it first of all, I was wondering if it was legal and whether he would be completely obsolete.

  It's pretty much going to be obsolete.  You would have to use the old drivers and some current hardware will not be supported.  Also, it doesn't officially work on operating systems later (although I had it works great under Vista - haven't tried Windows7 yet).

  The differencesare too many to name.  Only, I come back and use it to support very old code. I'm now down to only a customer that still has their software in there and I don't have to do anything for them in a couple of years now.

  If you want to play with it, it might be worth if purchase is $100 or $200 dollars if you try to teach you or whether you want to carry out the full investment for the current version.  If they charge more than that, it's a scam and they are hoping to find someone who absolutely must have 6.1 and is willing to pay for it.

• What are the differences between LabVIEW and LabVIEW FPGA and LabVIEW RT

  I need a comparison of LabVIEW, LabVIEW FPGA, and LabVIEW RT

  Sorry, I misunderstood.

  LabVIEW RT (LabVIEW Real-time) combines graphical LabVIEW of programming with the power of a real-time operating system, allowing you to create applications in real time.

• What is your best way to center align two objects without moving one of them?

  I would greatly appreciate your advice.

  Use the align palette and define an object as a key object. Choose align to: and that is defined on the object key (if not already set)

  

  1. Select a group
  2. Shift click to add the next group to the selection
  3. then click on a group to set this as a key object (the sketch will turn into a "BOLD" since CS4 to mean is a key object)
  4. Choose alignment in the Align Panel