What is the best way to format a drive external microSDHC?

Similar Questions

• What is the best way to create a backup external to the files from my laptop?

  What is the best way to create a backup external for my laptop files which may be about 40 GB +.

  There are a few utilities in Windows that will help you to back up data. Consult the following link:

  http://www.Microsoft.com/athome/Setup/backupdata.aspx#fBid=UkLRcjvJbN_

  There are many third party tools that will help you to do so. Here's a free:

  http://www.ssesetup.com/SDB.html

• What is the best way to import and export images from the 5 d Mark II?

  Hello

  I have just finished what I plan my first masterpiece of shooting film.  Shot on the Canon 5 d (1080 p, 24 fps), and the film looks amazing.  Now, I'm ready to start editing and now use creating lately, but I still have to figure out the proper conduct.  I want to know the best way to keep the resolution before I dive into this project.

  My questions:

  (1) what is the best way to start a new project and import the images without having to make while editing, in order to keep all the resolution and the originality of the source footage?

  (2) what is the best way / codec / format to export these images even once done editing to maintain than crisp 1080 p for which the 5 d is therefore counted?

  (3) what is the best way / codec / format for import and export / rendering between the first and after effects?  I speak especially of Visual effects and color correction.  I also a few sequences of 30 images per second that I intend to slow down in AE and then import into first.

  I know that it's wide enough, but as a solo Director I really need advice from someone.  Rarely, I finished my films with the same look crispy as images.  I need help of pipeline and really appreciate it!

  > used first lately

  A list of tutorial in the #3 http://forums.adobe.com/message/2276578 message

  1 - Please NOTE that the PPro CS6 screen may be a little different (I use CS5)

  For CS5 and later versions, the easy way to ensure that your video and your project

  See 2nd post for the photo of a NEW ELEMENT of process http://forums.adobe.com/thread/872666

  - and a FAQ on setting http://forums.adobe.com/message/3804341 sequence

  2 - BluRay... but I'm not sure if 1080 p is supported (I don't use of BluRay)

  1080 p http://forums.adobe.com/thread/995191 some work, some are not

  In addition, for upcoming posts, information FAQ http://forums.adobe.com/message/4200840

  In addition, read the metadata contained in the file http://forums.adobe.com/thread/1015001?tstart=0

  And finally, read Bill Hunt on http://forums.adobe.com/thread/919388?tstart=0 installation project

• What is the best way to resize an image, but keep the height and width of the same original size or format?

  What is the best way to resize an image, but keep the height and width of the same original size or format?

  I tried to use the function of the size of the Image, but when I changed the size of the image, the width has not changed with it.

  Thanks for the tips!

  Hi Landon.Luu,

  You want to keep the relationship between the width and height to be the same?

  Click the constraint between width and height to keep the ratio intact.

  

  Kind regards

  Claes

• What is the best way to obtain a string that represents a date in the format mm/dd/yyyy

  What is the best way to obtain a string that represents a date in the format mm/dd/yyyy
  
  It would be good if I could generate this string using the static methods of a class.
  
  
  
  
  
  
  

  You can use date formatter:

  Import mx.formatters.DateFormatter;
  ...

  var trainer: DateFormatter = new DateFormatter();
  formatter.formatString = "YYYY/MM/DD JJ:NN:SS;
  var today: Date = new Date();
  trace (formatter.format (now));

• What is the best way for foglight consume a webservice

  I hope that this is has not been replied that a bazillion times and if it is please send me the link I'm open to that.  What is the best way for foglight consume a Web service and respond with an alarm if the response from the Web service is not what is expexted.

  for example, calls Foglight webservice to acme.com/areuup and he responds with correct status in json format process.  If it does agree return, then foglight must send alerts to correct individuals.

  Thank you

  Kaleb

  in the end, we have used a perl script to capture the webservice and treat it and tables configuration.  Here is what has been written and created an agent custom.

  I apologize to all those who find the bulky comments, but it's my edition of journal of the script. I removed the comments once the script has been published and used.

  ===

  #! / usr/bin/perl

  #############################################################

  # Author: Kaleb J. Albee

  # Depandancies: SOA webservice

  # Engineers: Marc and Manu

  # Date: 28/02/2013 perl: (v5.14.2) built for x86_64-linux-gnu-thread-multi

  # Operating system: Linux 3.2.0 - 29-generic eam-ops-test #46 - Ubuntu SMP Wed Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  #############################################################

  use strict;

  use warnings;

  use Try::Tiny;

  use SOAP::Lite;

  use SOAP::WSDL;

  Use Time::Local;

  My = @soaenvs ('BSE - dev', 'BSE test', 'BSE-scene', 'BSE');

  # parameters: $_ [0] receives a call of SOAP client object.

  #

  void toStr {return $_ [0] == 1?} 'up': 'down' ;}

  void getBusResults {}

  # $_ [0] will be the $client spent

  # create a different buses SOAP connection.

  my $result = $_ [0]-> (getMessagingEngineHealth)

  # arg0 is used to set the setting for what is expected on the soa web service.

  SOAP::Data-> name (arg0 => $_ [1]));

  # $_ [1] will be the bus happened in

  return (Lk ($result) "started" eq? 1: 0);

  #return $result;

  }

  # Start sampling.

  My $curTimeStamp = "";

  my $count = 0;

  Print "LdsEsbBusHealth5\nSTART_SAMPLE_PERIOD\n TABLE";

  foreach my {$soae (@soaenvs)

  my $client is SOAP::Lite-> service ("put the url of the webservice here.");.

  $count ++;

  # create an object to inspect objects. My $insp = Data new::Inspect->; Download the time stamp for this.

  my ($sec, $min, $hr, $day, $mon, $year) = localtime;

  # format the year correctly for useage.

  My $curyear = 1900 + $year;

  # the hand to the fglam agent fields at the tables.

  My $soacei = getBusResults ($client, "messaging.000 - CEI.esb.BUS");

  My $soaapp = getBusResults ($client, "messaging.000 - SCA.APPLICATION.esb.Bus");

  My $soasys = getBusResults ($client, "messaging.000 - SCA.SYSTEM.esb.Bus");

  $curTimeStamp = ' $curyear$ MON$ day$ hr$ min$ s ";

  Print "SoaEnv.String.id=$soae\n";

  Print "CeiBusNum = $soacei\n";

  Print "AppBusNum = $soaapp\n";

  Print "SysBusNum = $soasys\n";

  Print "CeiBusStr.StringObservation.obs =". toStr ($soacei). "\n";

  Print "AppBusStr.StringObservation.obs =". toStr ($soaapp). "\n";

  Print "SysBusStr.StringObservation.obs =". toStr ($soasys). "\n";

  Print "Daterun.StringObservation.obs=$curTimeStamp\n";

  If ($count<=>

  Print ("NEXT_SAMPLE\n");

  }

  } {$soae foreach (@soaenvs) #.

  Print "END_TABLE\n";

  Exit 0;

  ===

  I hope this helps someone out there!

  Bravo!

• What is the best way to change a column type in the materialized view?

  Hello my dear friends,.

  I want to change a column type in a materialized view. VARCHAR2 NUMBER, so what do you recommend? What is the best way to do it?

  Thank you

  You can not change the data type of the column while there are data in the MV, so you might as well give up and recreate the MV with a TO_CHAR() around the column in question in the application of MV to get the data exactly as you want (be sure to include an appropriate format mask). That said, I'm fighting to think reasonable grounds to make such a change.

• What is the best way to change the size of a design?

  I have an announcement in A4 format and need to change it to a bunch of different sizes, what is the best way to do it? Just making it smaller does not work because the text that it becomes small to read.

  Erica Gamet gave a great presentation on this topic (which creates several sizes of an ad in InDesign) to my user group earlier this year. There are two messages for Erica who explains how to put in place:

  http://creativepro.com/understanding-liquid-layouts-part-one/

  http://creativepro.com/understanding-liquid-layouts-part-two/

• What is the best way to make a PDF file several Photoshop images, while maintaining editable layers?

  What is the best way to make a PDF file several Photoshop images, while retaining the layers in editable for later use mode? I tried to do in Acrobat, but it does not keep separate layers. I also tried to automate the PDF presentation in Photoshop, but it combines the layers as well. I need to enable layers from photoshop retain their ability to be edited.

  It is not possible at this time, Photoshop is not a page layout program and pdf is hardly a format suitable to hold several files psd layered or editable page layouts.

  Why would you do that anyway?

• What is the best way to get a comp from AE 2014 to Flash Professional CC?

  I created a training video for 10 minutes for a customer who wants this video for an interactive flash presentation now. Now that the XFL export is no longer an option for AE, what is the best way to get all of the animations in Flash without having to rebuild the entire project?

  The XFL format was not much more than what I mean. The files are huge and for a project that I built in AE by using export, time would have been better spent just making the whole project in Flash.

  In addition, if you are only working in Flash, you can create projects that work on mobile devices and use HTML 5 instead of the traditional Flash Player. And in my never humble opinion the SWF format is dead.

• What is the best way to use files recovery

  I work in FM 11 and broke FM a few times. What is the best way to use the recovery files and save them as normal files? So should I filter a window of the Explorer to "recovery" so FM don't ask me if I want to use the older recovery files? Thanks for your help.

  > What is a wash of the MIF?

  1. Save all the files of FM component .mif as MIF format.
     Save the .book as. book.MIF in the MIF format.
  2. Output FM.
     Restart FM.
  3. Open .mifs. Save as FM, replacing the old (FM probably saved files).
  4. Open the. book.MIF, re - register under .book.
     Note: do not open the. first book.MIF and then try to open the component files, or open the files binary pre - MIF.

  FM11 and 12 can have a free add-on as much as the fact in a single operation.

  Washing MIF creates new .book files and FM have syntactically correct data structures (and that may have lack of bad content). They are less likely to crash, but can still have problems.

• What is the best way to migrate PSE6 catalogue (Wxp) to new computer W7, PSE11?

  What is the best way to migrate PSE6 catalogue (Wxp) to new computer W7, PSE11?  Recovery of previous PSE6 (Wxp) after a HD failure gave rise to images showing, but not not opening due to connection problems.  Had to restore backup images and rebuild the catalog and albums.  Found a fix to third later that has no support spent PSE8.  Try to make this migration to painless PSE11.

  William47 wrote:

  What is the best way to migrate PSE6 catalogue (Wxp) to new computer W7, PSE11?  Recovery of previous PSE6 (Wxp) after a HD failure gave rise to images showing, but not not opening due to connection problems.  Had to restore backup images and rebuild the catalog and albums.  Found a fix to third later that has no support spent PSE8.  Try to make this migration to painless PSE11.

  This is a very common and classic situation:

  http://helpx.Adobe.com/Photoshop-elements/KB/backup-restore-move-catalog-Photoshop.html

  Just make sure that your backup on the external drive is ok: you should find a "backup.tly" file in the folder.

  Use the organizer of PSE11 to restore the backup of the PSE7: the first step restores all your multimedia files, the second automatically performs a conversion of catalogue in format PSE11.

  Read the note in the link above on the restoration of XP to the ulterior Win operating system. You can also restore to a location 'custom '. For example in a "C:\My new library" folder. Make sure the main folder is accessible to all users, and if you wish, you can move the catalog (database), itself from this location to the default location: Catalog Manager, ability to move catalogs in location that is accessible to all users.

• What is the best way to migrate from forms to ADF?

  We are in a big mess. Our company has been developing Oracle Forms for more than 15 years. We have applications developed in Forms 6i and 10 g. We have about 5 products and these 5 products have different versions of 25 to 30. that is, we maintain about 30 different versions of our applications. Each version of the application has about 100 forms and 100 States.
  
  Now, given that the forms came at the end of life of 11 g we want to pass to the ADF. We tried forms of ADF migration tools but failed. So now, we decided to manually to rewrite applications in the ADF.
  
  Our forms / PL/SQL developers, designers and analysts (about 40 in total) are all people of Oracle Forms. They have no experience in Java.
  
  What I want to know is:
  (1) what is the BEST way to do this?
  (2) need to learn Java, JSF, and ADF? (i.e. every 3)?
  (3) it is mandatory to learn JSF?
  (4) assuming that may benefit from a full training, how much time will it take for people of forms learn the ADF?
  (5) what kind of training will be necessary? (Java, JSF, ADF and JDeveloper etc..)
  (6) how LONG will take? that is to train all 40, then to rewrite an application forms 100 + 100 + reports? (Ballpark is OK).
  (7) any other technology we should learn?
  
  Published by: user12240205 on July 18, 2012 05:48

  Obvoiusly liked you training the better, but I think the minimum would

  (1) Java skills - I think to start, 1 or two days read some thing like head first Java http://www.amazon.com/Head-First-Java-Kathy-Sierra/dp/0596009208
  (2) I would then get the http://www.amazon.com/Quick-Start-Oracle-Fusion-Development/dp/0071744282/ref=sr_1_1?s=books&ie=UTF8&qid=1343201618&sr=1-1&keywords=jdeveloper+quick of "The Quick Start Guide to Fusion Development" (declaration: I am the author so have an interest, but I still think it's a good point of departure - this should be about 2-3 days to read and also to try things.)
  (3) in parallel I would observe these http://www.oracle.com/technetwork/developer-tools/adf/learnmore/adfinsider-093342.html#a1 ADF Insider Basics - a few hours
  (4) I'd so try this tutorial http://www.oracle.com/webfolder/technetwork/tutorials/obe/jdev/obe11jdev/ps1/ria_application/developriaapplication_long.htm - 3 hours.
  (5) if necessary, if you come from a background of forms I would also read http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/SummitADF/SummitADF_Redevelopment.pdf and watch http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/Forms_Redevelopment_ADF/Forms_Redevelopment_ADF.html - which is about 2 hours of work.

  I think it would be the absolute MINIMUM at least be able to build basic applications and begin to feel your way all also described in the http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADFTour/ADFTour.html 'ADF COLLATERAL TOUR' could be shot as you start to build a proof of concept. However, I would say don't you try to build a real application with a single exposure of weeks (in the same way, I don't expect you to design a database of product with the formation of a week only). I would probably expect your developers to have at least the above training, then spend a month or so evidence of (minimum) building of the concepts (or test themselves with the ADF Insider Essentials tasks). In addition, I would probably expect to have at least a senior developer/architect, with much more experience that may be decisions on things like reuse, partitioning, architecture, etc..

  Of course, it's all subjective, but I hope it helps.
  concerning
  Grant

  PS
  Of course, we also have lectures for university training Oracle which you could attend (or they can be bought to watch online).

• What is the best way to copy a large poster and print it?

  I am doing a project of great art (about 5 feet by 5 ft), where I'm going to learn things by hand and would like to make a copy of this project by analysing the it in the computer, or to take pictures high resolution project and their compilation together in the computer and then print the image at this size, or larger. So, I'll have the original, 5x5ft and one printed copy.

  What is the best way to achieve this?

  I heard that vector images are ideal for this, so is recommended for Illustrator this?

  I know it is a vector graphics program, but is it possible that I can take a bitmap of a scan or photo and somehow become a vector? If this is not possible, what are the recommendations would you?

  I have Illustrator CS2.

  I do not believe that the scanners large format are flat, if I'm wrong. In my view, they have a mobile head that scans the original bottle then made up the data with the software.

  It is not cheap, if the original can be easily damage they'll probably damage it unless you make sure that beforehand what they know about it
  and that they accept that they can scan without damaging it.

  Photography is a good solution if you know how the art of light and you use a long distance goal.

  The reason is shooting with a normal or wide-angle will give an effect of stretching the edges especially bandwidth due to the proximity of the camera to subject distance. The lens and the longer distance will accomplish the same capture without you stretching effect.

  Now, if you really have a service experience work fine arts or large commercial then scanning might be the way of.

  In both cases, I don't think you want to vectorize the art.

• What is the best way to work with Word documents in The InDesign CS4?

  I work in Microsoft Word 2007 and all my documents have.doc format.

  What is the best way to work with Word documents in InDesign CS4?

  David Blatner says to avoid copying and pasting text from Word instead of placing (Ctrl + D).

  How to paste RTF or text Document?

  I want to do a book layout in ID CS4 and its main feature is that there is the left page with the text and the right - with graphics.

  So, if I understand correctly place the text on each page I create for example 70 Word documents and place each element on 70 pages left?

  He loks like wasting time. I have supplements another way to make such provision?  What kind?

  It is best to place any text.

  You can have all your text in a single file and debit allows you to add text, images and pages as necessary block (hold down the SHIFT key when you click the loaded text cursor), but it is somewhat atypical for the thread on one side of the spread in the perspective of automatic flow, so you don't have to set up properly.

  It is a case where a block of text that you type will work to your advantage. On your master page, add a text block to the left page, but not to the right (or at least not donned one to the right - for another project you can actually two threads of independent text). Hold the cursor of the load on a frame on the left side of a page document and auto-flux. ID will add new spreads as needed, but only to put the text on the left side.

  Peter