What is the best way to free up space and improve performance of Vista?

Similar Questions

• What is the best way to free up space in C drive in Vista?

  Pop - up says I have littl/nop of space on the C drive and I need to free up space.  I removed several files / unused programs/etc and was allowed to download several files small photo. Then the no message available space appears again.  Suggestions?

  * original title - C DriveSpace away message.  What is the best way to free up some space? *

  Hello

  Make sure the message is your whole system C: partition and not your recovery D: partition

  see if this program helps you to determine what is take up space

  http://www.Jam-software.com/treesize_personal/

  by default system restore will have up to 15% of the capacity of the hard disk

  you would like to reduce this amount

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  http://www.vista4beginners.com/system-restore-space-used

  also use disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  also scan for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  and read these information from microsoft on windows optimization

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Partition question - what would be the best way to increase its space and take part of the space from another partition

  Hello, I have my 500 GB SATA broken down into 3 partitions. Vista and 2 others. The problem is the process of using Partition Magic, Vista has been given only 30 GB, now its operation with 1-2 GB of free space. I want to know what would be the best way to increase its space and take part of the space from another partition, but I don't want to have to reinstall or do I want to lose all the data like photos, browser, documents and news ect.

  -Thank you

   

  You can read more details on "How to move from one partition to the other sapce without loss of data.

• What is the best way to import my address and e-mail of Pegasus in Thunderbird?

  I use Windows 7 x 64. I have a number of files and many electronic addresses in the Pegasus Mail client. I'm looking to migrate to Thunderbird. Can you tell me the best way to move my files to Thunderbird?

  Thank you
  Allen Hill

  For your address books, can export you to a format such as CSV?

  To move e-mail messages, the cleaner is to use the IMAP protocol. Then your new client look just the same files you had in Pegasus.

  Unfortunately, email clients tend to use their own systems of storage of e-mail owner and there is no commonly used standards that could help to transfer between clients. If you can export files in mbox format, then Thunderbird can use.

• What is the best way to change this program and to read 1 sample of each channel?

  The initial program was conducted with NOR-traditional DAQ. I change it to DAQmx the best I could. The program, he is already the application of voltage to generate code (Daqmx Write.vi). But I have problems with the acquisition of tensions, give me readings rare (Daqmx Read.vi) I don't know if I have to make a (Daqmx start Task.vi) for each channel in the program or if I can make it work with a single. Notice I have no significant changes a lot because this program is already running in another lab, and they send us the program so we had no problems so much but rather than get the BNC-2090, they got the BNC-2090 is who uses DAQmx instead of the traditional. If anyone can help?

  A BNC-2090 is just a connection block.  It has no effect on the question of whether you should use traditional DAQ or DAQmx.  Which is determined by the DAQ card that you are connected to the terminal block too.

  You can refer to this document, differences between the BNC-2090 and connector BNC-2090 blocks has, but it's just saying to change the label of the Terminal Board to reflect the new DAQ cards.

  What problems are you having with the new VI you just posted?  You get an erro rmessage?  I don't know what mean "rare readings.

  You really shoud look at some cases DAQmx in the finder of the example.  Some problems that you are experiencing, is that your blocks of data acquisition are all kinds of disconnected.  Generally, you should connect the purple wire from your work function of creation, through the beginning, reading or writing, then the narrow task.  Many of your data acquisition functions are sitting there on the small islands now.  You should also connect to your son for the error.

  With DAQmx, you should be combining all your analogue channels in a single task.  It should resemble Dev0/AI0... AI7.  Then use a sample of channel 1 N DAQmx read to get an array of the readings, you can then use array of index to break.

  Other things you need to do is to replace the structures sequence stacked with flat sequence structures.  Turn on automatic growth for some of your structures such as loops.  At the end of the day, you might find, you can eliminate some of the structures of the sequence.

• What is the best way to import and export images from the 5 d Mark II?

  Hello

  I have just finished what I plan my first masterpiece of shooting film.  Shot on the Canon 5 d (1080 p, 24 fps), and the film looks amazing.  Now, I'm ready to start editing and now use creating lately, but I still have to figure out the proper conduct.  I want to know the best way to keep the resolution before I dive into this project.

  My questions:

  (1) what is the best way to start a new project and import the images without having to make while editing, in order to keep all the resolution and the originality of the source footage?

  (2) what is the best way / codec / format to export these images even once done editing to maintain than crisp 1080 p for which the 5 d is therefore counted?

  (3) what is the best way / codec / format for import and export / rendering between the first and after effects?  I speak especially of Visual effects and color correction.  I also a few sequences of 30 images per second that I intend to slow down in AE and then import into first.

  I know that it's wide enough, but as a solo Director I really need advice from someone.  Rarely, I finished my films with the same look crispy as images.  I need help of pipeline and really appreciate it!

  > used first lately

  A list of tutorial in the #3 http://forums.adobe.com/message/2276578 message

  1 - Please NOTE that the PPro CS6 screen may be a little different (I use CS5)

  For CS5 and later versions, the easy way to ensure that your video and your project

  See 2nd post for the photo of a NEW ELEMENT of process http://forums.adobe.com/thread/872666

  - and a FAQ on setting http://forums.adobe.com/message/3804341 sequence

  2 - BluRay... but I'm not sure if 1080 p is supported (I don't use of BluRay)

  1080 p http://forums.adobe.com/thread/995191 some work, some are not

  In addition, for upcoming posts, information FAQ http://forums.adobe.com/message/4200840

  In addition, read the metadata contained in the file http://forums.adobe.com/thread/1015001?tstart=0

  And finally, read Bill Hunt on http://forums.adobe.com/thread/919388?tstart=0 installation project

• What is the best way to "clean up/free space" on my computer? Thank you

  What is the best way to clean/free up space on my computer?  Even do not know where to look to see how much space I use... Thank you.

  A loss of main surface within each user profile would be penchant of EI for the storage of copies (or much) of almost every web page, your friend has already visited.  Try to reduce the amount of temporary Internet files put in cache, which is huge by default.  I always bring it back to a maximum of 50 MB.  In Internet Explorer, click on tools > Internet Options > general, temporary files > settings.

  Same principle for the Java cache. Start > Control Panel > Java > temporary Internet files > settings.

  The System Volume Information is the folder in restoration of which WinXP system feature stores information to retrieve errors.  By default, Windows XP sets aside a maximum of 12% of the size of the partition to store the information of the System Volume, but the amount of space reserved for this purpose can be adjusted by the user.  Start > all programs > Accessories > system tools > system restore > System Restore Settings, select the relevant partition and click settings.  If you don't want to use the system at all, restore simply to turn off System Restore (start > all programs > Accessories > system tools > system, System Restore settings restore) and restart.  This will remove all your Restore Points, thus freeing up hard disk space.

  An another great space waster may be trash.  By default, it takes up to 10% of the capacity of your hard drive. On today's big hard disks, it's a lot of waste.  It can be set to a lower limit by right clicking the desktop Receycle Bin icon, select Properties, and using the scroll bar to reduce the maximum size to something more reasonable - 1% to 2% should be more than enough space.

• What is the best way to buy an iPhone Unlocked 7?

  Hi all

  I am currently using T-Mobile and want to get the new iPhone 7. Since there is no option for a sim-free iPhone, what is the best way to buy the new iPhone? Should I get the T-Mobile one full fare? I know that he will be released version but it will come with a T-Mobile sim so what will do with the sim card? Put it away or give it to T-Mobile? Or should I wait for the version without card sim to appear, which I don't think that will come out until November, and I don't want to wait that long.

  Thank you in advance.

  If you do not want to wait to pay full price for the model from T-Mobile.  You can do whatever you want with the SIM card.

• What is the best way to consolidate e-mail messages in the e-mail program, before deleting?

  I have an iMac with a capacity to 1.11 - 679,49 GB available. With the software updated.

  Model name: I

  I have emails out of my different accounts in a "random" folder, but is not free up space. If I move an email in "Archives" and then it always remains in the e-mail account, apparently duplicate email in two places. "

  ERGO: the question is...

  What is the best way to consolidate e-mail messages in the e-mail program, before deleting?

  (I hope I've inserted which may be useful, but I'm not sure about that.)

  Thank you

  ilenefrombaltimore

  Archive messages or move them to some other local mailboxes or mailboxes on the server. Don't know what you are trying to do because it appears that you have 2/3 of your hard disk.

  Why do you think archiving emails in 2 places? Where are you trying to save space to?

• What is the best way of reformatting my MacBook ssd for resale?

  I'm preparing my 2015 12 '' MacBook 1.3 GHz 512 for resale.  What is the best way to erase and reformat the SSD drive?

  Thanks in advance!

  -jag

  Before you sell or give away your computer, and more the steps listed in this article to support, please follow these steps:

  1. run the Diagnostics from Apple or the Apple Hardware Test. The buyer will do (or it should), and you won't be surprised by the results.

  2. reset the PRAM and the SMC, which may contain personal information.

  3. If you set a firmware password, remove it by running the utility in recovery mode firmware password.

  4. If you turn on FileVault in OS X 10.7 or later, turn it off.

  5. If you use Boot Camp, the partition must be deleted.

  6. If you have created another partition of data on internal disk, remove them in disk utility.

  7. If the machine has an internal hard drive, erase the remaining data partition with the possibility of putting the data to zero. An SSD has no need to be set to zero.

  8. remove the machine from your list of registered products. If it is still covered by an AppleCare Protection Plan, transfer the warranty to the new owner as described in the terms and Conditions AppleCare (under the heading "Transfer of Plan.")

  Note also:

  You can legally or transfer almost any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. This includes OS X, so if you've switched to OS X 10.7 or later, you need to reinstall an operating system older, either from the installation media, if any, or by commissioning in recovery mode of the Internet (option-command-R start ringing.)

  The new owner will have to re-download everything software that came on the App Store, as appropriate, including updates of OS X, under her Apple ID. If you never updated applications bundled iLife (iPhoto, iMovie and Garage Band) through the App Store, you can not transfer these either. The buyer must buy them. Note that iPhoto has been suspended and is no longer available for purchase.

• What is the best way to install XP on Vista Equium A100-338

  I want to install XP on my Equium A100-338, who has already installed Vista. What is the best way to do it, I heard a lot of bad luck stories trying to do!
  I do it only as a new software, with that I need to work only works on XP.

  Any help appreciated

  Thank you

  Hello

  In my opinion, you must install the XP operating system on the second partition.
  In this case, you can use the two BONES; Vista and XP.

  Using these two s OS has many advantages. For example, you can always test the Vista and the new Microsoft features that are available in Vista and, in addition, you can use the XP if you need to run some programs and applications that are not fully compatible with Vista.

  Then first ask how o create a second partition in Vista.
  Well, this can be done in disk management. Right-click on the my computer drive management made right click on the disk to manage and modify the size of the partition.
  Then the free space on the HARD drive can be activated, and you can create the new partition.

  Then simply boot from Win XP and install it on the second free partition.
  The Toshiba drivers needed should be downloaded from the Toshiba page.

  Good luck

• What is the best way to create a backup external to the files from my laptop?

  What is the best way to create a backup external for my laptop files which may be about 40 GB +.

  There are a few utilities in Windows that will help you to back up data. Consult the following link:

  http://www.Microsoft.com/athome/Setup/backupdata.aspx#fBid=UkLRcjvJbN_

  There are many third party tools that will help you to do so. Here's a free:

  http://www.ssesetup.com/SDB.html

• What is the best way to completely uninstall optimizer registery of winzip

  What is the best way to completely uninstall optimizer registery of winzip? That seems doubtful, and has installed without my consent. Pls help

  Hello

  You can uninstall a program from your computer if you no longer use, or if you want to free up space on your hard drive. You can use the programs and features to uninstall programs or to change the configuration of the program by adding or removing certain options.

  For more information, see Uninstall or change a program

  Alternatively, you can contact their support team for assistance.

  It will be useful.

• What is the best way to upgrade Windows 7 Professional to Windows 7 Ultimate

  What is the best way to upgrade Windows 7 Professional to Windows 7 Ultimate to load the language packs?

  Hello
  Welcome to the Microsoft community. Sorry for the delay in responding.

  Please take a look at this article for more information on the upgrade to Windows 7 Ultimate.
  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade but now it would be better if you upgrade to Windows 10 directly. If you have Windows 7 Professional, you qualify for a free update to Windows Professional 10.

  Upgrade to Windows 10

  Which edition of Windows I get as part of the free update?

  To install the language packs take a look at this article.

  Windows 7 language packs are available for computers that are running Windows 7 ultimate or Windows 7 Enterprise

  Hope that the information provided has been helpful and let us know if you need more help. We will be happy to help you.

• Any transfer on a drive hard new - what is the best way?

  Here's a question simple and straightforward, I hope. I currently have two internal hard drives:

  • C (IDE): OS (Win7), programs
  • F (about three times larger than C, faster, SATA): for most of the multimedia stuff

  (And some external and a dvd burner, which should not be relevant to this question.)

  I ordered a new hard drive, which will take over old job of the F drive. Once I have install and F empty on it, I want to move everything that is currently on C for which is now F and the new C drive I start and run Windows from. (C would also get a new drive letter and would only be used for backup purposes).

  I much prefer this without having to reinstall Windows and all my other programs, and without investing in expensive software of type Ghost I would probably use only once every two years or more. I also prefer not to have to partition F, although I'll do it if necessary.

  What is the best way to do it?

  Windows 7 image and move it to the new hard drive

  The only way to avoid reinstalling programs is in the image of the player. Connect the new drive as a slave (if IDE), then partition the new drive, so it has two partitions (or more if you want) - the last partition being slightly larger, then the amount of data on your current hard drive. Also, make sure that the partition you are moving that Windows 7 is greater, then the current partition is.

  Make now a picture of your current hard drive with either programs below and save it to the last partition on your new drive. If you have the recovery of 100MB partition do not forget to include that. Then restore the image of the partition that you want Windows 7 installed-you put in place the same as long as your current drive, and you may need to remove/change the partitions that you have done.

  Both programs are offered free of charge:

  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.html

  Remove the old hard drive and see if a new start, if it is not:

  Try to repair the Installation of Windows 7

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. click on the link to repair list system in the System Recovery Options recovery tools.

  More information and a how to guide:
  http://pcsupport.about.com/od/toolsofthetrade/SS/Windows-7-startup-repair.htm

  If this does not solve it:

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD. If you are prompted, press any key to start Windows from the installation disc.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. Select command prompt and try the following commands (one command might work, or you may need to use several commands according to the exact problem):
   
  Bootrec /fixMBR
  Bootrec /fixBoot
  Bootrec /rebuildBCD

  Note: there is a space before the /.

  Space - increase free hard drive space

  Before taking the free picture of space hard drive if you want.
  The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
  2. in the drives list, click the drive you want to clean, and then click OK.
  3. on the Disk Cleanup tab, select the types of files to delete.
  Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
  4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

  Reduce the amount of space allocated to system restore.

  1. start--> panel--> system and safety--> system
  2. then click on the "System Protection" link located at the top left.
  3. in "system properties? window, click the tab "System Protection".
  4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
  5. now, click the "Configure" button to change the settings to restore "disk space".
  6. move the slider to the left to reduce the amount of disk space, that System Protection can use.
  7. click "Apply" and then the "OK" button after setting the disk space.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses