What is the connector 100 OEM part number used on the PCI-DIO-96 map pins?

I have a PCI-DIO-96 card and I want to make my own custom cable to connect to the connector of the OID 100 i/o pins.  However, I can't find any reference to the reference OEM of the connector used on the PCI-DIO-96 Board so I can order his companion.

If anyone knows of any information about the connector part number 100 pins used on the PCI-DIO-96 Board, I would be very happy to know this information.

Thank you.

Well, I found earlier the information I was looking for...  Page 1-3 of the PCI-DIO-96 manual (section "Custom wiring").  FYI, I have the March 2009 edition of the manual.  (it helps to actually read the manual, huh?)

In this section, two OEM mating connectors are suggested:

Company AMP (P/N 749879-9)

Honda Corporation (Ref. PCS-XE100LFD-HS)

I went to the website of the GPA.  There are actually two AMP parts active that do the trick... the P/N given in the PCI-DIO-96 manual map is the non-RoHS connector version.  The compliant version RoHS/ELV of this connector is AMP P / N 5-749879-9.  (Note than the previous one "5" in the part number)

For the purposes of referral, the connector is a series of 0.050 "SCSI cable insulation Dispalcement Connector [CID] (100 pins to 0.050" Ribbon).

In the United States, Heilind Electronics (http://estore.heilind.com) carries the AMP part.  Minimum purchase is six parts.  At the time of this announcement, they have a few hundred in stock.

If all goes well, that helps other readers.

-Mike

Tags: NI Hardware

Similar Questions

  • can I set up an amplifier to lock using the PCI-7831 RIO map?

    Normal 0 21 MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: 'Times New Roman' ;} "}

    Hi all

    I use FPGA, PCI-7831R module, I can implement locking an amplifier using the PCI-7831 RIO map?

    Kind regards!

    SUN

    Hey,.

    The following link shows an example of a lock-in amplifier set implemented on a cRIO with 9233 module.

    -> http://decibel.ni.com/content/docs/DOC-1762

    Hope this helps,

    Christian

  • Tecra M9: What is the "PCI Simple Communications controller"?

    Hello

    I just rolled back a Tecra M9 - 12R (T7300) to XP Pro.
    I found all the drivers on the site but now I installed all and yet, I get a non recognized "PCI Simple Communications Controller" in Device Manager.
    I installed the card ethernet and wi - fi driver modem very well.

    Anyone know what it is?
    Thank you

    I don't know about you but I need modem description. Have you installed driver modem Windows XP Home edition?

  • What are the PCI ANALOG OUTPUT PORTS Terminal 6024E block CB-68LP

    Dear all

    I want to get the analog output on the physical output signal. In my LabVIEW diagram, I develop the DAQ assistant and configure ao0 as analog output. The tension I want hovel is analog - 5v to + 5 volts. Terminal block, what will be the output port analog physical that I measure this voltage.

    Waiting for ypur response.

    Kind regards

    Irfan

    In MAX, you can simply right-click on the device and select 'device pinouts. The DAQ Assistant will also show pinout.

  • What is the good memory of 2 GB for my Areca ARC-1880ix

    Hello

    My Areca ARC-1880ix came with 1 GB of memory onboard.   I can't upgrade to 4 GB of memory.  But I'm just upgrading it 2 GB of memory, replace the key of 1 GB to 2 GB memory.

    I want to double check to make sure that the new memory is "compatible".  One of the reasons why I'm checking although it seems that the stick indeed fits within the Council, the stick is not too 'high' as the original memory stick.

    I guess that I'm being too cautious. I guess I could just the memory stick in the card and see if it explodes.  But I tell myself that I would run the sticks by experts here.

    See the attached photo of the two sticks, side by side. BTW, the upward alignment slots...

    The memory stick supplied with the card has these specifications:

    UNIGEN
    UG 12T7200M8DR-8CR

    1 GB DDR2 800 240PIN RDIMMS

    1116 ME75TDM80018CUEKRS

    The memory I bought is 2 GB and here are the specs:

    Kingston

    9905429 028.NATALIA AOOLF

    KTD-DM8400A / 2G

    1.8V

    0000005468831

    Specifically, this stick:

    http://www.Amazon.com/GP/product/B000ACZC9C

    Product features and technical details

    Characteristics of the product

    • Includes a module to 2 GB of 533 MHz DDR2 Desktop for Dell
    • Replaces Dell A0515351, corresponds to the size 4700C, xps gen 5, e520, optiplex 210l, 740, 745, gx280, gx520, gx620, gx745, sx280,.
    • Memory designed, manufactured and tested to the specifications of each particular brand computer system
    • The leader of the industry in the PC memory
    • type of DIMM 240-pin
    • Station work Precision 380 390 and xps 600 700 710

    Technical details

    • Model: KTD-DM8400A/2 G
    • Item package quantity: 1
    • Platform: PC
    • Memory RAM technology: DRAM, DDR2 SDRAM
    • Form factor: DIMM 240-pin
    • Memory storage capacity: 2 GB
    • Memory speed: 533 MHz
    • Memory specification compliance: PC2-4200
    • Warranty: limited lifetime warranty
    • Equivalent OEM part number: DELL A0515351


    big and small.jpg

    Rowby,

    This is probably the module you are looking for:

    Kingston ValueRAM KVR800D2E5 / 2G

  • Part number of Mini PCI WLAN for Sat Pro 2100

    Please can someone tell me the part number Wireless LAN Mini PCI for PS210E 007 T 9 en (Satellite Pro 2100).

    Hello

    I got a Toshiba Wireless LAN Mini PCI, which must be compatible with the Satellite Pro 2100
    Is the part number: PA3212U-2MPC

    If you want to buy accessories or devices to your laptop but you don? t know the right parts, so you can contact Toshiba service partner in your country.
    There you can order everything for your laptop.

    Also found this topic on the Forum.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=7516&MessageID=26108

  • PCI-DIO-96 - OEM IBM

    Dear support,

    I got my hands on some PCI DIO 96 maps in scraps of IBM tape libraries.

    These cards were inside a special device PC running OS/2.

    The card IBM partnumber is: 19 p 5156 (OEM 068-02369-0000)

    Is there anyway that I can run these cards under Windows?

    I suspect there is another 'firmware' inside the map, because it does not load the driver correctly.

    Said driver Windows Manager: could not start the device.

    I use NEITHER-DAQmx 9.0.2.

    Some PCI card info:

    PCI\VEN_1307 & DEV_0054 & SUBSYS_00541307 & REV_02\4 & 258F4AE7 & 4040

    Thanks in advance.

    H. Haken

    Netherlands.

    Hello h. Haken.

    I did some searching on Google with the provider information you gave. There are a few other manufacturers who use the same name (PCI 96 DIO) for their cards. With the vendor information you gave, I came across the site of calculation of the measure .

    In the end, we can conclude that this device is not working under the DAQmx driver. Please contact the manufacturer for the correct driver.

    Best regards

  • Satellite Pro P100: What is the part number for Toshiba for a 2 GB memory module

    Unable to find any sort of emailing this issue so I posted on the forum. Of course this info should be more easily accessible without having to ask.

    What is the number of part of Toshiba for a 2 GB for a PSPA4E-00F007 memory module. It's a satellite Pro P100 T2400

    http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 115421

    Gives memory crucial me this module - is that correct?
    http://www.crucial.com/UK/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304

    Found, via the Kingstons site - is this okay?
    http://www.dabs.com/ProductView.aspx?QuickLinx=4P3V

    Would be really grateful for official clarification here.

    Thank you very much

    It must be PA3513U-1M2G. Please check whether this module is compatible with your model of laptop. I think so.

    In any case I recommend to buy products of high quality like Kingston modules.

  • What is the part number for Toshiba for Satellite Pro L20

    Morning

    Anyone happen to know the part number for Toshiba Satellite Pro L20? I seem to have misplaced mine.

    Thank you
    If

    Hello

    I put t know what number you mean exactly, but there are several different models of Satellite Pro L20 what different numbers.
    All the necessary details and all the serial numbers, you will find on the label that was placed at the bottom of the unit. Please check this box.

    If you need these details for the part order or recovery cd, you must contact the after-sales Service of Toshiba partner. Here, you can order parts all supported.

  • Re: What is the part number?

    Hello people...

    I was wondering what the part number is suppose to say? Does this affect the specification of your laptop to another? for example, I have this laptop [Satellite A300 - 1 G 5 | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 1055589]. As you can see from the link, the laptop displays a part number: PSAG4E-_ * 03801 MG 3 * _. On my laptop cover, the label of the model is identical to the first part, but different on the second, its written like this: PSAG4E-_ * 03801HAR * _, have you noticed the difference? How important is this difference?

    I'll explain why Im concerned about it once I get a clarification on what means the part number... Thank you

    Hello Poison

    AFAIK, part number is a kind of identification number. Each laptop model is available with several different hardware configurations and different hardware components.

    Your Satellite A300 has PSAG4E model number. MU by Satellite A300 has PSAG8E part number.
    When you visit the Toshiba download page, where you can choose model right after the part number. Drivers available for your PSAG4E probably won't be the same as for my PSAG8E.

    I don't know what the difference is, but maybe my laptop model has other graphics card, the sound card or the card wireless network may be. This part of the part number is important to you.
    Other numbers behind this first part of the part number is depending on the country and it is absolutely irrelevant for you.

    So, what's your concern?

  • What is the point number (spare part) protects cable for ILÇE-7RM2?

    What is the point number (spare part) protects cable for ILÇE-7RM2?

    I'm looking for this part:

    http://Helpguide.Sony.NET/ILC/1520/v1/de/contents/image/b_cableprotector.PNG

    Thank you

    Michael

    I discovered, that it is the part number:

    Cable protector: X-2591-933-2

  • What is the number of keyboard for Portege Z30-A-1E5 part?

    Hello
    I want the Toshiba Portege Z30 A 1E5, but is apparently available for purchase of the German and Austrian sellers with the QWERTZ keyboard. I would like to buy an and Exchange on the keyboard AZERTY or QWERTY (UK).

    However, I spoke with a company that and they can't confirm that they can get a part unless I can provide a reference number of keyboard (they also cannot give me a quote without it), but this number does not seem to be easy to get their hands on without actually having the computer and take off the keyboard and research under! I feel a little nervous about spending so much money when there's a chance that I won't be able to reverse the keyboard.

    So my question is, can someone tell me what the part number of the keyboard is for the a-z30-1e5 portege?

    Any help would be appreciated!

    Kate

    Hi, Kate

    I m wondering why you want to buy a Portege Z30-A-1E5 that isn't available in the United Kingdom?
    The notebooks are pre-installed with a Windows system in different languages. In the case of Portege Z30-A-1E5 available in Germany, the system language would be German.
    The keyboard also supports a different layout.

    Portege Z30-A-1E5 was equipped with a processor i7, SSD 512 GB and 16 GB of RAM disk.
    Very similar Portege laptop, Z30 - has - 1 6 was released in the United Kingdom. Its preinstalled with the Windows system in the English language and English keyboard layout.
    Of course, the hardware specs are a little bit lower (256 GB SSD drive and 8 GB of RAM) but I think that this could be improved is much easier to replace the keyboard.

    However, where you can buy the Portege Z30-A-1E5, I recommend contacting the maintainer authorized Toshiba in your country for replacement keyboard. Guys could control the keyboard of Toshiba law and could perform the replacement.

    Just a note: the replacement must be performed by service provider authorized because of the validity of the guarantee. The replacement must be performed by an approved engineer to keep the warranty valid.

  • What is the number of MB of Satellite A300 part - 1 L 0 PSAGCE

    Hello

    I've got Toshiba A300 model No. - 1 L 0 PSAGCE-03100UGR.

    But there is a problem with graphics ATI 3450 (M82 chipset). After installing the correct drivers, I got blue screen on startup of Windows - and it says this file ati2... dll gives the problem. The same situation occurs on both Windows XP and VISTA.

    What is the reference number of the laptop computer motherboard mentioned? I intend to sell all parts of this laptop that is why I would like to know the part number.

    Part number is listed in the Toshiba database only then you have to find someone who has access. What you write when you sell your laptop, is that this motherboard is for A300 PSAGCE part number with.

    Someone who needs new motherboard will know what that means.

  • Envy 15-J138tx: what is the number of part of my keyboard?

    I want to replace my laptop keyboard. What is the part number of the keyboard? The model number of the laptop is HP ENVY 15-J138TX.

    Hello

    Please use page #92 of the first mamual on the following link:

    http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/5401187/model/6754031/manuals

    Kind regards.

  • What is the number of spare parts of the neck strap that comes with ILCA - 77M 2 (with printed logo a77II)?

    What is the number of spare parts of the neck strap that comes with ILCA - 77M 2 (with printed logo a77II)?

    Kind regards

    Michael

    Hi cmosse,

    Welcome to the community of Sony!
    Good day and thanks for the comment. The part number for the neck strap is 4 - 535-925-01.

    For further assistance about your concern, please contact us recommended to visit our Sony Global Web site for more information on contacting the Sony's Support centre in your area to http://www.sony.net/SonyInfo/Support/.

    If my post answered your question, please mark it as "accept as a Solution.

    Kind regards
    Zander

Maybe you are looking for

  • Bug when printing unicode

    I try to print some unicode characters. The browser fine poster, but what impression he show some square as when unicode is not found. For example, try http://getbootstrap.com/components/. Unicode is well displayed in the browser, but when I print (w

  • Why did you take away my toolbars of Google? WHY? !!

    I loaded the new version of FIREFOX. Now my Google toolbar is gone and Firefox won't let me load it on. WHY?

  • launch *.exe to view lab & write on it.

    Hello I use LV 8.2. I understand that 'executable system' can be used to launch applications or files *.exe, which works very well for me. My problem is writing text in the application is started or the exe file. I can explain for example - I used 'e

  • Files corrupt Word - Help!

    I have a Word document saved on a USB key. When I tried to open it, I got the message "the file could not be opened because there are problems with the content". When I click on details, the message "the file is corrupt and cannot be opened" appears.

  • Insert the string xml in a clob column. ??

    https://drive.Google.com/file/d/0BwAVQqYmX0-zMHZiS1F0SVdOMmc/view?USP=sharing DECLARE         v_clob CLOB := to_clob('xml string from local file'); --pls. download xml file from above url;         stmt NVARCHAR2(500) := 'INSERT INTO TEST(XMLDATA) VAL