Similar Questions

• I need the old Bios for my Satellite A100-233 PSAA8E

  I had updated my BIOS to version 6 and now my battery doesn t even hard 10 min... it see the 103 percent when it is fully charged...
  Is it possible that I can get my old BIOS... I think than v5.1

  Hello

  It's very strange

  First of all you will not be able to download the old version of the BIOS for Toshiba page provides only the most recent versions.
  So if you need the old BIOS, you will have to ask the help of the ASP

  With regard to the issue;
  I'm not very well if the BIOS has something to do with it, maybe you should unload until the battery would be total empty m and then try to charge it again.

  Check it out!

• Satellite A50 543 - what is the correct BIOS?

  Hello

  My friend has a portable Satellite and the internal CD drive is broken and its Windows had a virus and was showing strange behavior I want to install XP to clean. Does not support BIOS current ver 1.2 boot from USB CD-ROM drives. In the support section, I found a worm 1.4 BIOS that says in the description "adds this Bios Update expands the functionality of your system.", not very useful.

  The bios file is called bios - 20070808112012.zip for model Satellite: A50, model runs no.:PSA50E.

  I know this is probably a redundant question, but just to be sure I can be sure it's the correct BIOS that I am not too familiar with Toshiba naming scheme.

  see you soon
  damole

  Hey damole,.

  If you don't find this BIOS on Toshiba website for your model laptop is the correct version. I mean why Toshiba has release a bad BIOS doesn t work?

  But I searched a bit using Google and I think that it of not possible to boot from USB also with the new version of the BIOS. This is possible on the new laptops and Satellite A50 is old enough, so I think that in this case, you need to replace the CD/DVD drive. Maybe you can get a second hand one from eBay that is cheap.

  But if you install XP from a Microsoft disc, a CD/DVD drive isn't necessary. Copy the folder integer i386 to the HARD disk and start the WINNT.exe file.

• What is the latest BIOS for Satellite C855-1U4

  Hello everyone

  I wanted to know about which title was the latest bios for the Satellite C855-1U4 notebook computer.

  Thank you.

  Hello

  You can find the latest version of the BIOS on the Toshiba UE driver page.
  The C855-1U4 Satellite is part of the PSCBYE series and now I can find the BIOS 1.60 - WIN

• margins for the printer so the words are not cut on the right side. What are the correct numbers for size printing letter?

  What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

  What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

  go to the icon for your printer, go to the page set up, size, A4 sheet? 19.05 mm pitch all sides, mine is set up for this and it seems ok. or what you like

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• What is the correct URL for the commercial intent tool?

  I'm in the middle to make a transfer online. I need to know the tool the URL of Microsoft online commercial intention.

  I like: adlab.microsoft.com/Online-Commercial-Intention/default.aspx

  I tried Microsoft and a google search...

  This tool still exist? And if so, where? What is the correct URL?

  Thanks for your help!

  This is the site for

  http://ADLAB.Microsoft.com/audience-intelligence.aspx

  But when I click on the online commercial intent tool, the page is not found.
  http://ADLAB.Microsoft.com/online-commercial-intention/

  I would like to use the contact information on this page to see if the tool will be available:
  http://ADLAB.Microsoft.com/contact-us.aspx

  Contact information
  • Microsoft Bing Ads Labs
  • 1 Microsoft way, Redmond, WA, 98052-6399
  • Phone: 425.882.8080
  • Fax: 425.936.7329
  • E-mail: * e-mail address is removed from the privacy *.
  • Website: http://adlab.microsoft.com

    Sincerely,

    Marilyn

• What is the correct syntax for the use of a variable in an ad-hoc query?

  Hi all
  
  I'm a casual user of the DB and right now need to update the records about 1000 + so that a certain column gets a unique value.
  
  So I thought I'd use a variable for this.
  
  Then, I built this type of SQL statement for only a small subset of records:
  ----------
  variable number recNumber;
  exec: recNumber: = 1;
  UPDATE TABLE_TO_BE_UPD
  SET COL_TO_BE_UPD = COL_TO_BE_UPD + recNumber
  WHERE COL_TO_BE_UPD IN ('VAL_A', 'VAL_B');
  ----------
  
  I get invalid SQL statement error when you try to run above (except for the guest who asks for a value I want to omit).
  
  In any case, I also tried this one:
  ----------
  CREATE SEQUENCE seqCounter;
  UPDATE TABLE_TO_BE_UPD
  SET COL_TO_BE_UPD = COL_TO_BE_UPD + seqCounter.NEXTVAL
  WHERE COL_TO_BE_UPD IN ('VAL_A', 'VAL_B');
  ----------
  
  Of it, I got the error ORA-01722: invalid number... I guess it's because seqCounter is of type number and the COL_TO_BE_UPD is of type character... (?)
  
  Then I want to ask is what is the correct way to define and use a counter variable type to add a number at the end of a string?
  
  Also another question I would ask is that are variables that are used in queries ad hoc, also called "bind variables"?
  
  Thank you muchly

  If you want to add a unique number to a column, then it would be:

  UPDATE TABLE_TO_BE_UPD
  SET COL_TO_BE_UPD = COL_TO_BE_UPD ||to_char(rownum)
  WHERE COL_TO_BE_UPD IN ('VAL_A','VAL_B');
  

• Hi, I have Windows 7 on my laptop dv6408nr and wanted to know what is the correct BIOS

  Is there a download for the newest BIOS for Windows 7?

  Thank you

  Mike

  Hi Mike,.

  If everything works Ok, then I'd not concerned - I has machines with their level of original bios running Windows 7.

  There is not bios available for your laptop running Windows 7 - definitely not trying to Flash the bios with an installer designed to another version of Windows as it can "brick" the machine.

  Kind regards

  DP - K

• What is the correct notation for complex variables

  I need to handle files after download. They are all uploaded in 1 directory by a flash component and then I need to rename them, and move to the directory that corresponds to the choice of categories and subcategories. Now I'm having trouble finding how to get my variables correctly

  It's the thisFiletoMove1 variable, it must match the destination file in the cffile tag

  (< FileExists('#request.site.imgupload#\max_#MultiPowUploadFileName_0#') cfif >
  < cffile action = "Rename".
  source="#request.site.imgupload#\max_#MultiPowUploadFileName_0#".
  destination="#request.site.imgupload#\#request.currentimgid#_max.jpg" >
  < cfset thisFiletoMove1 = #request.currentimgid #_max.jpg / >
  < / cfif >

  < cfset thisFiletoMove1 = #request.currentimgid #_max.jpg / > is what gives an error construct CFML invalid encountered, ColdFusion was looking at the following:

  _max.jpg

  Then I try

  < cfset thisFiletoMove1 = #request.currentimgid & "_max.jpg" / > and I get
  

  The C:\websites\beta.antiek.net\demo\galleries\test\thisFiletoMove1 source specified in the cffile tag is not valid

  So now I wonder, what is the correct way to do this?

  Bianca

  bianca_homedev wrote:

  I need to handle files after download. They are all uploaded in 1 directory by a flash component and then I need to rename them, and move to the directory that corresponds to the choice of categories and subcategories. Now I'm having trouble finding how to get my variables correctly

  It's the thisFiletoMove1 variable, it must match the destination file in the cffile tag

  
   
  source="#request.site.imgupload#\max_#MultiPowUploadFileName_0#".
  destination="#request.site.imgupload#\#request.currentimgid#_max.jpg" >
     
  

  is what gives a construction of CFML not valid error found, ColdFusion was looking at the following:

  _max.jpg

  Then I try

  and I get

  The C:\websites\beta.antiek.net\demo\galleries\test\thisFiletoMove1 source specified in the cffile tag is not valid

  So now I wonder, what is the correct way to do this?

  All are both wrong:

  
  

  You were near. What you meant was probably

  However, are even better
  
  

• What drivers do I need for my Satellite A100-912

  When I open the driver www.toshiba.com page, I saw a series below books
  A100-S2211TD
  A100-S2311TD
  A100-S8111TD
  A100-ST1041
  A100-ST1042
  A100-ST3211
  A100-ST8211

  He was not listed on my laptop. My laptop model is A100-912.

  Hello Murat

  Problem is that you can't find your model of laptop (Satellite A100 - 912 (PSAA9E)) on the Toshiba US Download pages and only you should use is Toshiba Europe page under http://eu.computers.toshiba-europe.com/

  American books have different model description as the European specifications. I checked your other job offers, and I assume you are trying to find the Vista drivers. Am I wrong?

• HP 8200elite cmy: what is the latest bios for the 8200 elite and where it is on the site?

  Well, I have used the tools to support on-site and can find references of the bios, in the downloads section, but they are the actual files of nin for the bios...?

  I J01-2, 03 currently on the MB, but I was wondering if there was a newer bios, I can't identify what is in the section downloads correctly or coorelate against the installed bios...

  any help would be welcome

  Thanks in advance

  Keith

  You are the very welcome.

  Yes, this is the last update.

  If you click on the history tab of review on the link I posted in my first answer, you can see all previous versions.

• What is the correct format for a single. File ALX for pre and Post 5.0?

  Hello

  We have an application which works fine on the pre 5.0 BlackBerry OS.  We have one ALX file that uses the _blackberryVersion designation to determine what COD files must be installed to which devices.  We do this because we build separate sets based on the device, for example, the version of the storm is more optimized for the storm devices.  It was all working well, but with the release of BlackBerry OS 5.0 OS versions seem to have changed.  Previously, the storm was 4.7.0.x and when the tour came out it was 4.7.1.x.  Now, however, so the Bold 9700 and Storm 2 are the two 5.0.0.x to the less based on the OS versions for the two simulators available right now.  It is therefore impossible to use the name of _blackberryVersion in the ALX file, at least for us, since we have different files COD for the storm, with touchscreen and other devices without touchscreen.

  So, I try to understand what the appropriate method for the use of a single file ALX is in this case.  From what I can tell the _blackberryVersion element uses only the three first sections of the version, for example 4.7.0 or 5.0.0 so even trying to make it more specific would not work and would also not practice for all minor versions that will be potentially different carriers.

  I did try to use the name of the series, for example , and even that would not work.  I also tried with 9500 | 9530 | 9550 and always had an error in the Application Loader saying there is no compatible software.  At first I thought it was due to some sections of with _blackberryVersion and then some with the series.  But I tried a new ALX file with just the designation of series and still no luck.

  Has anyone found how to do this properly yet?  Are there examples of ALX files which series =? Someone at - it examples of work from ALX files that use the _blackberryVersion and the series?

  Before everyone jumps on me, I'm not the real Director of enforcement, I only update the ALX file.  So I don't think it's possible to have a single file of COD to build, but at that time, that never would have happened so I need to find the best solution with different files of COD, that shouldn't be a problem because she supported and described in the documentation.

  If I need to display the ALX file please let me know.

  Kind regards

  David Dewaele, Jr.

  The correct series attribute for 9500 is "Thunder".

  You can find that where she attributes to all here-(for normal installations)

  C:\Program Files\Common Motion\AppLoader\Device.xml search

• What is the correct value for "simultaneous: GSM enabled.

  What is the value for the option of profile:
  
  ' Competitor: GSM enabled.
  
  Is this 'Y' or 'yes '?
  
  Can someone give me a link to the 11.5.10 docs that show this?

  Hi Chris,

  What is the value for the option of profile:

  ' Competitor: GSM enabled.

  Is this 'Y' or 'yes '?

  It's there for Yes and N for no..

  You can refer, please
  * [How to set the simultaneous Option profile: GSM enabled for N using AutoConfig | https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=391240.1] *.

  * [How to solve problems when the Workflow Services descend | https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=564394.1] *.

  * [Services start correctly with the active GSM | https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=391239.1] *.

  * [Troubleshooting problem Manager Start Up related to the Service Manager competitor | https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=735148.1] *.

  Thank you
  Anchorage :)

• Pavilion g6-1d21dx: what is the latest BIOS for my Pavilion G6?

  Details, please! I was told on this forum that I had to upgrade the BIOS for my Pavilion g6-1d21dx to a F.48 version, which seems to be the last being available on the product page. However, the BIOS currently on my machine is version F.49. F.49 would be not newer than a F.48? Can someone explain the discrepancy and tell me if there are significant differences between the two versions of the BIOS?

  I ended up installing the BIOS revision F.46, because this revision restores the ability of the computer to enter and exit the sleep and hibernation modes, which was broken in a future revision of the BIOS (which has been a HUGE source of frustration). In the absence of other information on the revisions of the BIOS, I recommend that users go with revision F.46. The 32-bit version of Windows 10 works beautifully with F.46 on my g6-1d21dx Pavilion.