What is the correct order to install Win7 to Satellite P750-103?

Hello

I'm going to do a clean install on my laptop with Win7 x 64 and I would like to know if there is a specific order to install the driver and if there is a way to download all in one package (zip or other) or if I really need to download one at a time in the support page. If Yes, what Bluetooth driver I install: when I try to download that one I m re-directed to another page with a lot of them

Thanks for the help

Order of installation is very important for a successful OS installation. All the necessary drivers, you can find on the download page of Toshiba. Unfortunately, you have to download and install one by one. Toshiba doesn't offer a sort of all in one package.

Order of installation is as follows:
Win7 64-bit SP1
PatchFiles V1.0
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
SW 9.2.0.1015 Chipset installation utility
Intel Management Engine Interface V7.0.4.1197
Driver Intel 8.15.10.2353
267.44 NVIDIA display driver
Driver Intel Rapid Storage Technology 10.1.2.1004
Utility 1.63.51.2C TOSHIBA supervisor password
TOSHIBA HW Setup Utility 1.63.1.34C
1.63.0.12 TOSHIBA Flash Cards Support utility
TOSHIBA value added package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Audio Realtek Driver 6.0.1.6305
TOSHIBA 1.0.3 Wireless LAN indicator
Wireless LAN driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Driver Package v1.0.4 Filter
Battery Bluetooth for Windows by Toshiba v8.00.06 (T)
Realtek LAN Driver 7.038.0113.2011
JMicron 1.00.57.02 card reader
ENE CIR driver V3.2
Tuner DVB-T/ATSC YUAN V2.3.3.41 driver
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep 1.4.2.7 utility
3.1.9 TOSHIBA face recognition
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
2.0.0.7.64 HDMI Control Manager
Remote control TOSHIBA 3.0.6.1 Manager
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree 8.0.37rev.2
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA resolution + plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG - 1.2
PatchFiles TosVolRegulator_x64_1.1

Good luck.

Tags: Toshiba

Similar Questions

  • Tecra M7: What is the correct order to install drivers Vista

    Hello

    after Vista fleeing RTM on my Tecra M7 Tablet and using a mixture of XP and Vista drivers, I decided to rebuild my machine.
    However is - that someone could advise on the order in which the Vista drivers must be applied when Vista is back on?

    Kind regards

    Rhys

    Hello

    As you can see the document of instructions for installations is unfortunately not available but you can try to install it on this way:

    OPERATING SYSTEM
    Display driver
    Audio driver
    Driver modem
    touchpad driver
    Flash media driver
    Value Added Package
    Tablet PC Extension Package
    Support Button
    Config Free
    And so on...

    I hope you will successfully install OS.

  • What is the correct order of network provider

    original title: network provider order

    What is the correct order for network providers.

    my choices are:

    a. provide Dell Wireless WLAN Card Logon
    Server Desktop Session host remote M/Soft b.
     c. Web Client Network and
    d. M/Soft Windows network...

    Hello

    The order of network providers can be changed according to the requirement. I suggest you to see the following link on the change of the network adapters.

    Modify the protocol bindings and the network provider order
    http://TechNet.Microsoft.com/en-us/library/cc732472 (v = ws.10) .aspx

  • What is the correct order of installation between Siebel - Apache?

    Hi, I have a Siebel architecture with an Apache web server. I wanted to confirm the installation order, that is to say, I install Siebel Enterprise, Siebel server and the gateway. After that, install the Apache web server and, finally, the Siebel Web Server Extension. This is the case? This is the correct order? or should I change a component of the place?

    Thank you very much
    Kind regards

    In siebel 8.1.1 first you install Gateway Siebel and Siebel Enterprise Server, install Siebel server, install the configuration DB utilities, create DB Siebel and install Siebel Web Server Extension (SWSE). If a Siebel DB is not already created, see doc below for more details and considerations:

    http://docs.Oracle.com/CD/E14004_01/books/SiebInstUNIX/SiebInstCOM_InstSES3.html#wp2367737
    http://docs.Oracle.com/CD/E14004_01/books/SiebInstUNIX/SiebInstCOM_InstSES9.html#wp2367945

    The Web server must be installed before installing SWSE. Make sure that you use a supported apache based web server:

    http://docs.Oracle.com/CD/E11886_01/V8/core/SRSP_81/SRSP_81_ServerEnv8.html#wp1013532

    Thank you

    Wilson

  • Satellite P750-103 - what drivers should I install?

    I have the following problem: after you have reinstalled Windows 7 64 bit and the pilots, who have downloaded from the official website Toshiba.ru, licensed my laptop slowly began to run File Explorer, with indexing for 5-10 minutes the contents of the hard disk (sometimes - with no results).

    I think that probem associated the mechanizm of driver installation.
    East - the right conclusion?

    If YES, in this regard, I have the following questions:

    -Should what drivers I install?
    -What is the correct serialization of installing these drivers?

    Hello

    See the list of drivers and make sure that you have installed all of the drivers listed:

    Win7 64-bit SP1
    Sun Java2 Runtime Environment 1.6.0_20
    TOSHIBA Assist 4.02.02
    TOSHIBA Bulletin Board 2.1.10
    TOSHIBA ReelTime 1.7.17.0
    SW 9.2.0.1015 Chipset installation utility
    Intel Management Engine Interface V7.0.4.1197
    Driver Intel 8.15.10.2353
    267.44 NVIDIA display driver
    Driver Intel Rapid Storage Technology 10.1.2.1004
    Utility 1.63.51.2C TOSHIBA supervisor password
    TOSHIBA HW Setup Utility 1.63.1.34C
    1.63.0.12 TOSHIBA Flash Cards Support utility
    TOSHIBA value added package 1.5.4.64
    NVIDIA HD Audio Driver 1.1.13.1
    Audio Realtek Driver 6.0.1.6305
    TOSHIBA 1.0.3 Wireless LAN indicator
    Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
    Synaptics Touch Pad Driver 15.2.11.1
    TOSHIBA HDD Protection 2.2.1.13
    Atheros Bluetooth Driver Package v1.0.4 Filter
    Battery Bluetooth for Windows by Toshiba v8.00.06 (T)
    Realtek LAN Driver 7.038.0113.2011
    JMicron 1.00.57.02 card reader
    ENE CIR driver V3.2
    USB3.0 Driver 2.0.34.0
    TOSHIBA Sleep 1.4.2.7 utility
    3.1.9 TOSHIBA face recognition
    TOSHIBA eco Utility 1.2.24.64
    TOSHIBA HDD/SSD Alert 3.1.64.8
    TOSHIBA Service Station 2.1.52
    2.0.0.7.64 HDMI Control Manager
    TOSHIBA PC Health Monitor 1.7.5.64
    ConfigFree 8.0.37rev.2
    TOSHIBA Web Camera Application V2.0.0.19
    TOSHIBA V4.00.6.08 VCR - HAS
    TOSHIBA Media Controller 1.0.86.2
    TOSHIBA Media Controller plugin 1.0.6.1
    TOSHIBA resolution + plug-in for Windows Media Player 1.1.0
    PatchFiles PCIIDEREG - 1.2
    PatchFiles TosVolRegulator_x64_1.1

  • What is the correct recovery process once upgraded to Windows 10? (No OneKey Recovery)

    I have a cell phone Z50-70 which is preinstalled with Windows 8.1. It is an OEM version, with the product key that is stored in the Bios. This is an installation of UEFI.

    The vehicle currently has OneKey recovery installed, which, if I understand well (I've not used actually still), allows you to recover from a hard disk recovery partition. This is not a "fresh" Windows 8.1, but an image provided by Lenovo that take back you to the State the laptop was bought originally (will have all software Lenovo and preinstalled drivers).

    According to the official upgrade guide Lenovo, before performing the upgrade of Windows 10, we should uninstall basically all software from Lenovo, including OneKey recovery and it won't work in Windows 10.

    Issues related to the:

    1. What is the correct process to recover the system from Windows 10 if something goes wrong? I think that Windows 10 integrates a feature "Reboot your computer" in the settings which I suppose is what we are supposed to use. It would take me to:

    a. a completely new install Windows 10?

    b. a created image during the upgrade from 8.1 to 10, containing all my files etc. when performing the upgrade?

    c. or he would use the recovery partition from Lenovo (which would have used OneKey Recovery if it was compatible) and take me back to 8.1 for Windows?

    (d) another thing?

    2. once I did the upgrade and Windows 10 has successfully activated, I think I could create a bootable with ISO of Windows 10, inside boot media and install a completely new install of Windows 10 and activate it. Theoretically, I could make as many fresh installs from the boot media I want, as long as initially, I did the upgrade (not a clean install), and the hardware of the laptop does not change. Is this correct?

    2A. If, therefore, during the first boot media clean installation process, I'd be sure compeletly remove the Lenovo recovery partition entirely and go from there, rely on 'Reset your PC' feature of Windows 10? Could I could use even just reinstall Windows boot again media 10 as a way to recover? If I understand correctly, it is not absurd to keep recovery partition it if it can not be used within Windows 10.

    I think I had a desktop PC ordinary with a retail version of Windows, then everything above would be fine. The complications added here are that 1. I have no product key Windows 8.1 (alll is managed by the BIOS) and 2. I have no recovery disk. I want to make sure that I understand everything completely before moving, and potentially do a clean installation using bootable media, so that I don't end up ruin something and end up with either a laptop I can not recover, a Windows installation that is not enabled.

    Thank you.

    Update for anyone of another reading:

    I just uninstall OneKey recovery on my installation of Windows 8.1 for the upgrade. While Windows is concerned, OneKey Recovery has been completely removed.

    The good news is that I then shut down the laptop, you press the novo button, selected "System Recovery" and I was always greeted with OneKey recovery program where I could choose to restore from original image, or a custom image. So I guess that once I have upgraded to Windows 10, I'll always have the option to restore to the factory Windows 8.1 if I ever need/want to.

    The confusion seems to be that OneKey recovery software is actually two separate software:

    1 OneKey Recovery #1 is installed in the hidden recovery partition which is responsible to perform a system restore from the image of your choice - either the image of plant or a custom image created by #2 OneKey recovery software. OneKey Recovery Software #1 is still accessible via the Novo button.

    2 OneKey Recovery #2 is installed on the Windows 8.1 installation, which is responsible for the creation of custom system images. You can also choose to restore the system from here, but AFAIK, it just restarts the computer and OneKey #1 software, which allows you to recover expenses. OneKey Recovery #2 is the software Lenovo told us to uninstall it before Windows 10. However, uninstalling OneKey Recovery #2 let software OneKey Recovery tact #1.

    As far as I know, this means that the uninstall OneKey Recovery #2 mean that we lose the ability to create custom system images, but we reserve the option to restore from a system image.

    Can anyone confirm that I understood, and that what I said above is indeed the case?

    I'm still a little uncertain about what Windows built tens in the willingness to ' PC ' do well - that it will use the Lenovo recovery partition or run a 10 Windows Installer Clean up.

  • Card rules do not run in the correct order

    Hello

    I am using FDM 11.1.2.1.

    I imported data and used the card rules: mapping was not what you expected, so I had to modify the sequence of the rules on the map.
    So I updated the sequences of the rules on the map and re-validated (even re-imported) = > I still have the same problem: the card rules do not run in the correct order.

    Below is an example of a line imported with this problem:

    Export of the import mode:
    PARTITIONKEY | CATKEY | PERIODKEY | ACCOUNT | ENTITY | AMOUNT | * UD5 *.
    749. 12. 2011-03-31 00:00:00 | 60413031 | MM31N0 | 773. * 000000 *.

    Rules of the card for the dimension of the UD5 (exported from FDM) (sorry it is not well presented :-/))

    %{DIMNAME/} SRCKEY SRCDESC TARGKEY WHERECLAUSETYPE WHERECLAUSEVALUE SEQUENCE VBSCRIPT PARTITIONKEY
    749 UD5 MTN424 project MTN424 MTN424 1
    749 UD5 R_PROJ_AXMECH project AXMECH #SCRIPT IN * 2 * ' * If Left (varValues (15), 2) = "" MM"" Then. "

    * Result = ""AXMECH *"
    Else if varValues (15) = "" MSIND0"" Then
    Result = ""AXMECH"
    Else if varValues (15) = "" MSTLP0"" Then
    Result = ""AXMECH"
    End If '.
    UD5 749 * 000000 * project undefined PROJET_NON_DEFINI * 3 *.
    749 UD5 R_PROJ_AUTRES other projects * AS * 4

    If despite the sequence 1-2-3-4, the UD5 000000 is mapped to PROJET_NON_DEFINI (rule explicit map with sequence 3) instead of AXMECH (IN the rule of the map with sequence 2).

    Thanks in advance for your help

    Fanny

    The card sequence numbers have effect in a single mapping type (Explicit, between, in, analogues), not through multiple types of mapping only. Explicit cards always take precedence.

  • What is the correct version of Flash Player for Kindle Fire HD?

    What is the correct version of Flash Player for Kindle Fire HD? Where do they find it? How can I install? Thank you.

    Hi nani2eande,

    The last Kindle Fire HD is not officially supported by Flash Player.  Please see this page for a list of all certified devices:

    That said, some users were able to get Flash Player working on Kindle using Dolphin fire, a third of browser.

  • What are the correct settings in outlook express to pop and smtp in att.yahoo?

    What are the correct settings in outlook express to pop and smtp in att.yahoo?

    If it's a US or CA, Yahoo account, and that you are not subscribed to Yahoo Mail Plus, then you cannot access the account in Outlook Express.

    POP Yahoo! Mail more for Outlook Express configuration
    http://Overview.mail.Yahoo.com/enhancements/mailplus

  • margins for the printer so the words are not cut on the right side. What are the correct numbers for size printing letter?

    What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

    What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

    go to the icon for your printer, go to the page set up, size, A4 sheet? 19.05 mm pitch all sides, mine is set up for this and it seems ok. or what you like

  • Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

    Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

    What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

    start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

    When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

    I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

    An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

    So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

  • What is the correct URL for the commercial intent tool?

    I'm in the middle to make a transfer online. I need to know the tool the URL of Microsoft online commercial intention.

    I like: adlab.microsoft.com/Online-Commercial-Intention/default.aspx

    I tried Microsoft and a google search...

    This tool still exist? And if so, where? What is the correct URL?

    Thanks for your help!

    This is the site for

    http://ADLAB.Microsoft.com/audience-intelligence.aspx

    But when I click on the online commercial intent tool, the page is not found.
    http://ADLAB.Microsoft.com/online-commercial-intention/

    I would like to use the contact information on this page to see if the tool will be available:
    http://ADLAB.Microsoft.com/contact-us.aspx

    Contact information
    • Microsoft Bing Ads Labs
    • 1 Microsoft way, Redmond, WA, 98052-6399
    • Phone: 425.882.8080
    • Fax: 425.936.7329
    • E-mail: * e-mail address is removed from the privacy *.
    • Website: http://adlab.microsoft.com

      Sincerely,

      Marilyn

  • What is the correct syntax to reference a page point (P23_ID, for example) in a process of PL/SQL page after submit?

    What is the correct syntax to reference a page point (P23_ID, for example) in a process of PL/SQL page after submit?

    TexasApexDeveloper wrote:

    Variable binding is preferred: P23_ID you can also use & P23_ID. (variable substitution notation).

    Bind variable and static text substitution references are not interchangeable. For example, static text substitution references cannot be used in allocation targets:

    :P23_ID  := 'foo';  -- valid
    &P23_ID. := 'bar'; -- syntax error (or something weird or sinister due to SQL injection)
    

    Substituting static text references should be avoided in SQL and PL/SQL code because of the risk of behavior topic SQL injection and / odd error because of values containing quotes, etc.

  • What is the correct procedure to take a host of a hav?

    Sometimes need to take a host far a hav, what is the correct procedure for it?

    Thank you!

    George

    Disconnect the host in your cluster, and then remove host.  Or evacuate all customers outside the host, put in maintenance mode, and then remove the cluster

  • What is the correct procedure to abandon diskgroup asm is rac?

    Hello

    I would like to table a diskgroup in asm to the CCR? What is the correct procedure?
    1 should I disassemble the diskgroup firstly in 2 node?
    2 alter diskgroup xxx drop command to run in the 2 nodes or just 1 node?
    3. after droping command, is there any other procedures to be done?

    No matter what doc to follow?

    Thank you

    Andrew

    Hi André,.

    860523 wrote:
    Thank you very much. Oracle 10.2, if I unmount the diskgroup, I want something offline, or what is the procedure before changing disgroup xxx disassemble?

    You MUST remove (using DBCA) or move (using RMAN) all databases stored on the diskgroup (if exists) before giving up DISKGROUP.
    (1) check if there are any database using the DISKGROUP.
    The query above must return no rows.

    SQL>  SELECT D.NAME,C.INSTANCE_NAME,C.DB_NAME,C.STATUS
         FROM GV$ASM_DISKGROUP D , GV$ASM_CLIENT C
         WHERE D.GROUP_NUMBER=C.GROUP_NUMBER
         AND D.NAME = '';  
    
    no rows selected
    

    If the above query returns rows you remove and stop must all first trial or move the database to an another DISKGROUP.

    (2) remove the Diskgroup all instances of ASM, except one.

    ALTER DISKGROUP  DISMOUNT;
    

    (3) decline diskgroup of the ASM instance, that the diskgroup is still mounted

    DROP DISKGROUP ; -- If no files on DISKGROUP
    DROP DISKGROUP  INCLUDING CONTENTS; - If exits files on DISKGROUP
    

    Just it.

    Kind regards
    Levi Pereira

Maybe you are looking for