What is the driver used for the PCI8360.

Similar Questions

• What operating system I use for iPhone 4?

  What operating system I use for iPhone 4? It will work with OS 9?

  7.1.2 No. is as high as possible.

• Computer HP laptop slim 500 GB HARD drive: used for HP laptop HARD drive upgraded to Win 10 Pro with key now stuck after HP Drive Encryption Login

  I bought a portable hard drive used HP for the upgrade of my Lenovo G550 with ugraded CPU with Intel's CORE DUO T9300 2.50 ghz

  (HP hard drive: computer laptop slim drive HARD 500 GB SERIAL ATA DISK DRIVE S/N W627S9NL P/N 756731-001 MFG Seagate Technologies DOM 8 / 2015)

  I was happy to see that the hatd drive had already installed because Windows 7 I had bought already separate legitimate Windows 10 Pro license key for the upgrade. I was able to go online and download the upgrade of Windows 10 and used my purchased license key to activate my updated.

  While doing the installation, there are some HP software that was still on the hard drive. I thought it would be good to have some additional security protocols, so I also installed the WinMagic Securedoc Bootloader v1.2.12 and saved the drive encryption HP with the security issues and password for secondary access.

  10 Windows has been activated and everything was beautiful. But when I restarted the laptop, I put my password for windows and then it goes to this screen of disc HP encryption rises. I put the password and it is accepted - and then the screen turns white... not offshore... jblank TEU with a cursor flashing that doesbn can't react to inputs.

  I tried leaving it for a day or so and still nothing.  There is nothing I can change in the configuration of the BIOS that works so far.

  I also tried Reimage download on USB and re-creation of the sequence of boot, but not good. Even tried a boot drive, but nothing there either. I'll try again.

  I don't know where to go or how to get beyond the screen of HP encryption.  I am pretty good at following directions, I don't know coding, but may do what you suggest to help me fix this problem.

  Can you help me?

  Sorry... I missed the part that you have a license Win10.  I thought you were trying to activate 10 using the OEM HP license and causing problems.

  I do not use HP encryption applications - as having recently completed a career in the InfoSec, I personally focus together on the encryption of the PC to be laughable-, but my guess is that you are basically out of luck.

  If it was my drive, I WIPE the drive of all its content and then again install Win10.  A good product to do i.e. DBan: http://tiptopsecurity.com/how-to-securely-wipe-your-hard-drive-with-dban-erase-your-data-for-good/

  Once your disc is clean, then simply install Win10 on it.

  That said, with a bit of luck, one of the HP EXPERTS will probably come along and tell you how to get around their encryption.

  Good luck

• Should what audio drivers I use for Windows XP?

  I need to know what audio drivers should I use for Windows XP?

  Use the XP drivers for your model.

  Download drivers

  Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions.

• What VB6 API to use for Resultlist

  Hello, I am trying to extract portions of the resultlist of teststand 3.5 in VB6.  In particular, I try to get the err.code and the err.msg of the last step in which the error has been reported in teststand.   I don't know what object API to use.      In 'teststand help' index, I noticed a Table STEP_RESULT schema, which contains error_code and error_message, but I'm not sure how to apply in VB6.

  My apologies Dan. Here is the link to the reference for the TestStand 4.2 manual.

  For step 4 of my post above, please replace Parameters.Result with Parameters.Step.Result.

  For example, instead of Parameters.Result.Error.Code, you would use Parameters.Step.Result.Error.Code.

  I hope this helps.

• Know what Android SDK is used for compilation

  Hi, I wonder if there is a link any documentation or something that we can easily see what Android SDK has been used in every AIR SDK to compile the .apk files? For the moment, I need to know what version of Android SDK has been used for AIR SDK V23?

  Hi Hadi,

  Please go through the release notes below and refer to the upgrade of the Android SDK section:

  Flash Player Help. Release notes | Flash Player® AIR® 20 20

  We always have the same version of Android SDK for AIRSDK 23.

  Thank you

  Adobe AIR Team

• What operating system to use for Exchange 2010?

  I'm currently in the planning/design phase of implementation of our new Exchange 2010 server.  Our current environment using Exchange 2003 on Windows Server 2003.

  Exchange 2010 is 64-bit, I want to install Windows Server 2008 R2 64-bit, but my question is... do I install Windows Server 2008 R2 Standard or Enterprise?... What is the main difference between the 2 platforms, OS should I consider before decide me which one to go with?

  I searched online for a while and can't seem to find a definitive answer to this question, or at least a logical explanation that would allow me to determine which is best for what I want.

  Any help is greatly appreciated.

  Thank you

  -Angel

  The main difference between the medium Standard and Enterprise's clustering and memory. It was a big difference in Windows 2003, if you need more than 4 GB of memory. With Windows 2008 x 64 I think 16 GB of memory allows to use this grouping is the $ 64 question. You do cluster CCR or SCR with Exchange 2010?

  Mike

• What order should I use for iPhone more 6s?

  I am new to Premier Pro, but I have a question. Which order am I supposed to use for images shot on the iPhone 6 more.  Mobile & devices does not work so please help me.

  [Left the lounge general Forum, troubled for a specific product - Mod support forum]

  Everything you have to do is your film simply drag the icon of the sequence and it will create a new sequence for you with all the correct settings.

  Alternatively, you can start editing your video right there on your phone with Clip first from Adobe app, and you can open this project inside Premiere Pro when you return to your desk.

• What background process is used for data files retriving data

  Hello
  
  What background process is used to retrieve data from data files
  
  as I know dbwn is used to write the data to the SGA buffer cache in data files
  
  and I want to know that when the recovery of data from the data file in the buffer cache that back ground process is used
  
  I want to process structure
  
  Thank you
  
  Gita

  Hello

  What process will write to connect to buffer?

  Process server :)

  Kind regards
  Rakesh Jayappa

• Satellite C850-1E7 - what SSD can I use for the upgrade?

  Hi all

  I am looking for one SSD hard drive.
  Problem is the documentation does not specify whether the system is Sata 3 GB or 6 GB.
  I understand that if I buy a 6 GB SSD and the system supports only 3 GB, there is work, but I would rather try to localize "cheaper" 3 Gb SSD if the system supports up to that speed.

  Look under the hood, the current HARD drive is a SATA 3 Gb.
  Any of you know?

  Satellite C850-1E7 (serial: YC325575R)

  Thanks for any help.
  See you soon
  Chris

  Hello

  You could easily find what SATA controller not Satellite C850-1E7 support.
  Different hardware diagnostic tools she will provide you with details.
  I recommend you to install and test software like Sisoft SANDRA or Everest Home Edition.
  Both will provide the device properties built in Notepad.

  But I think that the device supports the SATA II (300Mbit/s) controller.

  > I understand that if I buy a 6 GB SSD and the system supports only 3 GB work remains
  Yes, it's okay because the SATA controller is compatible to the bottom

• What settings should I use for the rear button focus put in place for the d5 mark 3? TIA

  5 d Mark 3

  When you press the menu button, highlight on (using the knob on the front of the camera) menu "C.Fn2: disp.» "/ Operation" orange. (it's the icon of a camera that has an index of points for a light meter below - right of the wrench, to the left of the star icon).

  Each of these menus on the 5 d III have several pages.  This is the 2nd page (the 2nd point from left to right) who has the category of "custom controls".  Note that (using the wheel on the back this time) and click on the set"" button.

  Which displays a menu showing each of the important controls on the back of the camera and what they do.  Highlight the icon for the shutter button (this modifies the behavior of a half-press) and change to 'measure and AF start' to just 'start of counting.

  "AF-ON" button (on the back of your camera) is probably already put 'measure and AF Start' (I think that this is the default factory setting).

  If you're not so much focus to enable back-button (which is probably already active) you're more "power off" the focus when the shutter button is pressed to halfway.

  Good luck

• What is most commonly used for the Cache Timesten IMDB?

  Hello
  TimesTen focuses on the description of table based on cache groups and there is no way to load a schema at the same time.
  
  Is this means that it is designed to be cached especially a small number of large tables than on the tables of any scheme, support something more similar to an application?
  
  I would like to know what is your knowledge, the more common use of timesten.
  
  Manage manually a large number of table creates problems when some force is "disappeared" to timesten creating the CG.
  
  I tried to tables from a Primavera P6 project management schema cache (187 tables and other views more, etc.). Trying the scheme has reported an error about a missing relative to a constraint). Loading of a given subset resulted in very small number of set tables cached in reality due to the lack of other related tables.
  
  
  So if timesten is a very good solution, all the necessary step to get a consistently large number of cached tables seems to be is not so effective.
  
  Thank you
  Fabio Alfonso

  An application using TimesTen IMDB should be designed for TimesTen and the necessary hierarchy for it to load properly. Primavera is designed without a doubt not properly.

  Most people use the IMDB as a cache to environments of volume of very high transaction or in environments where peak loads exceed the ability to execute transactions directly to a RDBMS on disk.

• That must make the password stored in the JAGENT portfolio, and what JAVA_HOME should I use for the pw_agent_util.sh command?

  I configure the GoldenGate Plugin for OEM. There is a step to create the portfolio. The documentation is not clear on the role of the provided password. If I run the JAGENT as user oracle, it must match the password for the oracle user, or is this separate password? Also, should I use the jdk to OEM agent to set JAVA_HOME?

  ./pw_agent_util.sh - jagentonly

  Pat,

  Morning.  Good to see that someone is working on the use of the plug-in for GoldenGate in OEM12c.

  If you use the plugin 12.1.0.2, you will be much better with the preparation of reports on the processes of GoldenGate.  In order to get the 12.1.0.2 plugin to work, the 12.1.3.0 JAgent is necessary and can be downloaded in the distribution of the Oracle GoldenGate monitor (Agent Monitor configuration Oracle #GoldenGate |) DBASolved).  If you use the old plug-in 12.1.0.1, the JAgent is integrated with the GoldenGate Software (Oracle GoldenGAte(11.2.1.0.1 and later) and Oracle Enterprise Manager 12 c |) DBASolved).  I recommend you take the new plug-in!

  Now to the address that ask you the password. The password is stored in the portfolio under the House of GoldenGate ($OGG_HOME/dirwlt) and is used directly for the JAgent to connect to the EMAgent and connect with OEM.  The password associated with user name is configured in the $JAGENT_HOME (different depending on version, look for the Config.properties).  Then in OEM, the user name defined in the Config.properties and the password in the portfolio must be provided before OEM GoldenGate targets will come.

  The $JAVA_HOME parameter is dependent on the version of JAgent you want to run.  The JAgent 12.1.3.0 to using the JDK 1.7 or higher.  The JAgent shipped using JDK 1.6.

  Thank you

  Bobby

• Should what output parameters I use for rendering the pc for mac final cut 10

  I recently spent from mac to PC and must make files to use on my machines to editors who are pimps. I need to know what output parameters, I should use to pull them into my graphics without any problem and must also ensure that the alpha channels are also available in the CF.

  It's a QuickTime .mov file. Now, you can do it is a PNG with AE sequence if you wanted, but I didn't think this is what you wanted. Select QuickTime as the format and PNG in the codec section. If you make sure you choose RGB + Alpha in your output module, you will also get your alpha channel.

• Should what Management Interface I use for the free version of ESXi

  I plan on the implementation of the free version of ESXi on a server with Intel VT technology.

  I have a management interface for my free version of ESXi.

  I was told by someone that I need to manage VSphere.

  I can just purchse VSphere and should be fully compatible with the free ESXi?

  If so, should what version of VSphere I buy?

  What are my alternatives to a manageable GUI that won't cost too much? (I intend to manage only 5 virtual machines on the ESXi server)

  Thanks in advance!

  When you download the VI client from the http:// you the Virtual Infrastructure Client GUI.  Not a powershell environment.  See attached screenshot.