What is the event when back to summon the Manager

Similar Questions

• OMF and to what extent the management

  I have a few questions about OMF, missmanagement and go to 10g:
  
  (1) if I mostly BLOB data, it would be better to create a bigfile tablespace or not?
  (2) for the management of the measure, should I do allocate local?
  (3) if I use the OMF, can I still specify autoextend for the data files?
  (4) if I create a storage space for the BLOB data, which would be a good idea? Then do everything else in another space, or one doesn't do that?

  1. you probably don't use bigfile tablespaces, less that the total size of the storage space exceeds the maximum size allowed for a database based on the Oracle block size (32 G for 8 k) and use of several data files to support a tablespace is not desired.

  Only if the object is actually going to be very important and the total number or size of the files needed in support of your database can be a problem should you consider using a bigfile tablespace. If all of the LOB data will be in the range of Teragbyte so yes.

  2. Yes, you must use a locally managed tablespace. Automatic assignment would probably be good. Auto-allocagte takes into account the extensive application and spend more of 64 degrees k and 1 M if the initial allocation is sufficient.

  3. I think so.

  4 - If you need a space for the BLOB data will depend on the expected total size, your decision to point 1 above, and if you want to use uniform extensions on the base table or lob segment that are either different in the size of each other or you want to use auto-allouer for but not the other.

  The segment size is very important with LOB space use/reuse. With 11g, you can convert files secured basic file usage (10g and below CLOB and BLOB segments) to get best performance and storage methods, used internally by Oracle.

  HTH - Mark D Powell.

• When I add a new event to the calendar, what I type is 'New event' when I press return. Why?

  When I add a new event to the calendar, I type the name of the event in the field, change the time, add notes, etc. When I press return, the new event indicates briefly on the calendar as what I typed, but most of the time, it is up to 'new event '. I tried to change my sequence of this type I and sometimes validate instead of return, but it doesn't seem to be a reason for this behavior. Also, it happens all the time, just most of the time.

  It's extremely frustrating because if I don't notice it right away, I don't know what was the event.

  Any suggestions?

  I use OS X, 10.9.5.

  Maybe this will help.

  Calendar may not enter the new event.

  Calendar may not enter the new event (2)

• All of my icon are icons of java. When I click, a back short style window appears, then disappears. I can not open files or links. What is the simple solution?

  All of my icon are icons of java.  When I click, a back short style window appears, then disappears. I can not open files or links. What is the simple solution? This CHANGE occurred on 15 July.

  The simple solution is:

  1. type the word restore in your Start menu.  Some options will appear.  Choose to restore the system and settings files
  2 - Click Next, choose July 14 (or a date before the problem occurred), and then click Next again.  Your system will restart with repaired parameters.
  Let us know if it works for you.

• What type of event is triggered when the Panel is collapsed?

  I'm working on an extension and I hit a dead-end. It seems that when you click on the Control Panel, a type of window.loaded event fires. But what type of event is triggered when reduce you the rear panel in the shape of the icon?

  I want to link the serialization to the window.unload or window.close event, but nothing similar seems to work, which means that such an event is not raised.

  Any ideeas?

  Hello

  Our next version of the CEP will include support for resizing by program an extension and receive events when the visibility of the Panel has been changed for example just collapsed.

  Kind regards

  LEA

• What is the sequence when a PDF file is generated?

  I would like to know the sequence of events when a PDF file is generated from InDesign CS4 using the Adobe PDF 7.0 printer. PostScript is involved somehow before the PDF is generated and I would like to have a better understanding of what is happening.

  Acrobat Help says:

  In an application such as Adobe InDesign, use the command print with the Adobe PDF printer to convert your file in Adobe PDF format. Your source document is converted to PostScript and sent directly to Distiller for conversion to PDF, without manually starting Distiller. Preferably current Distiller and Adobe PDF settings are used to convert the file.

  It is the a delicate, at least for me, because the explanation is confusing. My problem is the following: under InDesign > file > print > printer I have a PDF Adobe 7.0 (as well as my regular printers), and I don't know who 'Adobe PDF settings' are currently designated.

  QUESTION 1

  The expression of aid:

  Preferably current Distiller and Adobe PDF settings are used to convert the file

  is that the fact of Distiller > Preferences, and Distiller > settings Adobe PDF (the main window to distill)?

  QUESTION 2

  When I select the Adobe PDF 7.0 printer and press print, InDesign creates Postscript itself, or he asks using Acrobat or Distiller?

  QUESTION 3

  At some point before I get the PDF, a Postscript file will be launched, and it's "fairly directly to Distiller for conversion to PDF. At this stage, the Postscript file only is all the options that I asked in the print of InDesign dialog box (exit, Advanced Graphics, transparency and so on)? Or has there been some back-and-forth discussions between the Distiller (and its parameters) and InDesign (and its print settings) to solve all the conflicts?

  In short, is it correct to say that InDesign creates Postscript by itself (subject to its print settings), and then distilling takes Postscript from InDesign and converts it to PDF format (subject to its own parameters).

  Are you talking about export or print to PDF?

  Exported PDF files is not converted to postscript at all. It is exported

  directly to PDF using the libraries PDF internal.

  When you print to PDF, InDesign creates a postscript file, as it would

  What impression on any standard printer and Distiller converts that to

  PDF. Distiller simply acts as a virtual printer.

  The postscript created by InDesign file contains all the options work

  selected in InDesign - as would any postscript file everything

  printer.

  In summary, Yes.

  But you really should be export directly from InDesign and avoid

  the PostScript scene altogether...

  Substances

• When you use find on the page (ctrl + F on Windows) it is a message indicating the total number of matches. What does the first number?

  When you use find on the page (ctrl + F on Windows) it is a message indicating the total number of matches. What does the first number?
  I'm more interested in the case when this number is smaller than the total.

  Hello

  I think you mean the text stating "x of there matches", to the right of the box where you entered the search term.

  The first number ("x" in my example above) indicates the current entry highlighted on the page that matches the search phrase. If you use the upper and down arrows to navigate through the instances of this term on the page, you will see this number go up and down.

  I hope this helps, but if not please come back here and we can look at another solution for you.

• When I try to add a credit card to pay Apple for Apple Watch, field security Code only allows three characters, but my password for my Apple Watch is four.  What is the problem?

  When I try to add a credit card to pay Apple for Apple Watch, field security Code only allows three characters, but my password for my Apple Watch is four.  What is the problem?

  He is not asking for the PIN for your watch, he wants the security code 3 digits on the back of the credit card.

• Generate the event when the focus lost

  Hello

  is there a way to capture an event when a textbox control lose focus?

  Thank you.

  Yes there is, just create an event filter button on this control of the chain and when a tab is entered you trigger your (re) load event. Or you can set a keyboard shortcut for this field (such as ctrl-D) to define a group of controls to a default state.

  What are the complications that would keep a button 'Load' of work? Maybe things are too complicated and we need to simplify things a bit.

  Mike...

• What is the fastest method producer consumer. Queue, RT-FIFO, event

  Hi all

  Another question completed for the pro:

  I recently inherited the labview code that uses RT-FIFO for the transfer mechanism in the architecture of the producer consumer.

  The code was first written in 3-4 years and is currently in LV8.6. It is possible that the reasons for the architectural decision no longer exists.

  I am qualified using a producer consumer queued architecture,

  I understand the RT-FIFO Architecture.

  I started using an architecture based on events from the user.

  (I have attached samples of each)

  I also see the existence of a priority queue

  Each method has its own capabilities and gaps, that hand, nobody knows the relative performance of each method.

  (Assuming that the only process)

  I would expect RT-FIFO to be faster, there seems to be a version of low characteristic of a standard queue.

  What is the perfornace hit to use a coding user-friendly queue more

  RT-FIFO description talks about commications between the time-critical and lower priority threads.

  Until today, I thought that the queues had the same capacity.

  

  I've included an event method that I commonly use for review by peers and help from other users...

  It allows to:

  1. several producers with different types of data

  2. process 37 production order.

  3 allows asynchronous verification of functional notifiers such as stop, start and abort.

  4. in a system not real-time, it can include interactions of façade.

  What I do not understand on this subject, that's what are overhead or thread priority changes that may occur using this architecture (it solves a lot of problems for me).

  Thanks in advance,

  Hi Timmar,

  Here's a KB article on some frequently asked questions about the RT FIFO: http://digital.ni.com/public.nsf/allkb/7AE7075AF1B2C58486256AED006A029F?OpenDocument

  The more relevant question is #4, I posted below.

  What is the difference between RT FIFO and queues? 
  Functionally, RT FIFO and LabVIEW queues are two pads of first in, first out. However, here are the main differences between them:

  • RT FIFOs run deterministically in LabVIEW and evanescent code queues are not. This comes from the fact that queues use block calls during read/write to the resource shared, while RT FIFOs use non-blocking calls.
  • RT FIFO are fixed size while queues develop when items are added to them.
  • RT FIFOs will execute the code, even if there are input errors. They can (and will) produce new errors and spread the existing errors.
  • Queues work with any type of data, while the data types that can be used with RT FIFOs are limited. Generally any type of data involving allocations of extra memory can be used with RT FIFOs to preserve determinism.

  Let us know if you have persistent questions!

  Ryan

• What is the purpose of the BOOTSECT. BACK file on a system dual boot?

  What is the purpose of the BOOTSECT. BACK file on a system dual boot?

  Hi Clyde,

  What is the operating system installed on your computer?

  Bootsect.DOS is the boot sector loaded by NTLDR charge BACK, or if there is no file not specified when an operating system is not NT-based loading. When your computer is configured to dual boot in Windows NT version 4.0 and another operating system, it uses a hidden file called Bootsect.dos to boot into the no Windows NT operating system. If the Bootsect.dos file is damaged or is missing from the root of the C drive, you receive this error. Bootsect.DOS is created by the installation of Windows NT. The boot sector in sector 0 of the C drive is copied in Bootsect.dos until the installation program writes the Windows NT boot sector. (Setup will not overwrite an existing Bootsect.dos.) If you choose a previous operating system, Windows NT runs Bootsect.dos, simulating the normal procedure to start the previous operating system. Because the information contained in Bootsect.dos is really created by the previous operating system, it is very difficult to re - create.

• When I close a program, it seems that the page is molten! What are the causes that

  Just as I said, when I close my Internet explore the page looks as it melts down.

  When I close the Office computer looks like it is melting.

  What are the causes and how can I fix what is wrong

  I ran mcafee and malware programs.

  I have compaq presario v5000

  Windows xp

  32 bit

  do not add ons running.

  I don't see how someone can offer you promising ideas knowing more about your system.  The best you can get is speculation on what might work sometimes maybe. All we seem to know is what sort of a Presario V5000 with XP (there are a lot of different V5000s).

  It worked better in Mode safe or clean boot?  Even if it did, this does not your problem, unless you want to run mode without failure or boot for the rest of your life.

  If you restored to the factory settings in the past, then you have all your video drivers updated?  Chances are good that everything that comes out of the plant is outdated when it leaves the factory.

  If I were you, I would first take a look at your specifications and make sure that your video drivers are up to date.

  Should be considered ditching of McAfee (since it's a famous memory and CPU hog) and replace it with something with a smaller footprint like Microsoft Security Essentials (MSE).  You can simply use the McAfee uninstaller install temporarily and see how things work... you can always reinstall later if you are forced to do it, right?  (but I wouldn't).

  If you still have the problem after all and the verification of your video drivers, check the properties of your system performance (especially the Visual effects) Options.

  Why don't you do this so that we can see what you have:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For video device and driver information, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  * Original title: startup

  How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  Hello

  I understand you want to learn about programs, you should start your Windows startup. I will certainly help you to question.

  When you start Windows by using a normal startup startup, several applications and services automatically, and then run in the background. These programs include the base system, antivirus software, utility applications processes system and other software that was previously installed. These applications and services may cause interference when you install or run a program.

  The system configuration is a tool that can help identify problems that might prevent Windows from starting correctly. You can start Windows with common services and startup programs turned off and then reactivate them, one at a time.

  I suggest you to refer to the links below and check if this is useful:

  Using the Configuration System (msconfig)

  Perform a clean boot to determine if background programs interfere with your game or program

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• What are the risks by removing the previous Windows installations when you perform disk cleanup?

  What are the risks by removing the previous Windows installations when you perform disk cleanup? Will be some things about windows 7 stop working or be affected?

  The Windows.old folder is your ticket to uninstall Windows 7 and roll back to Vista.

  If you are happy with the results of leveling, can access all your data files, all that you have transferred to the E-mail, the .old folder can be deleted.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• What is the repayment on BB Plan when someone claim how to repay him?

  What is the repayment on BB Plan when someone claim how to repay him?

  a man is not satisfied with one of my requested refund application. How I'll pay him back I need money help on this... BB will pay him back as the amout that paid the guy is with the BB help me soon I want to help him get his refund

  The following seems to be the way to get the refund if the customer has paid with paypal or cridit card: