What is the fastest Possible SD on Tecra M9?
Hello
I have Tecra M9-185.
I want to install linux on a 16 Gb SD Card, or use it as a small flash drive
What is the SD card more fast that is supported? (15 MB/s, 20 MB/s, x 100, x 133, x 200...)
Thank you
Oren
Hello
I think that it s no matter what speed is the SD card.
I know, it's that Tecra M9 supports SD card maximum up to * 4 GB capacity * and you can also use the SD - IO cards.
Welcome them
Tags: Toshiba
Similar Questions
-
What is the fastest processor I can install in Satellite A200-1YW?
Hello!
A question: what is the fastest processor I can install in this laptop? Current processor T5450 is.
Thanks in advance for your help.
Hello
As far as I know the chipset is capable of managing the CPU
Intel Core 2 Duo processor
Intel Core Duo processor
Processor Intel Pentium Dual Core
Processor Intel Celeron MBut as General, upgrading CPU is always a delicate procedure and it is possible that a higher temperature which is produced by a CPU stronger could affect the functionality of the laptop.
Welcome them
-
What is the fastest processor available in a laptop?
I do video editing and speed is important.
What is the fastest processor available in a laptop?
Hello
As far as I know the fastest mobile processor is the Intel Core 2 Extreme CPU.
The QX9300 is the fastest quad core processor and the X 9100 fastest dual core processor.But don t forget that the speed of video editing is not only based on the central unit. You must also fast hard drives at 7200 RPM and at least 4 GB of RAM.
I hope I could help a bit.
Good bye
-
Satellite Pro M10: What is the max possible CPU
What is the maximum possible processor to use in this laptop? Thank you!
The laptop has one of the following processors, which includes 64KB
L1 cache and 1 MB cache L2:Processor Intel Pentium M 1.3 GHz
Processor Intel Pentium M 1.4GHz
Processor Intel Pentium M 1.5GHz
Processor Intel Pentium M 1.6 GHzGenerally, it should be able to use one of the processors listed above. But I read in this forum that Toshiba does not support updates and so you could upgrade the processor only at your own risk!
-
What is the fastest connection that I can use for a new external SSD for my MBP late 2008?
That IS the question. I want a new external SSD for my MBP late 2008.
What is the fastest connection type that works?
'External' and 'SSD' could be a problem. SSDS are different animals of disks spinny. Some will say that you need not trim on SSD (TRIM is a management tool to move only the ' opportunity' bytes in a block when the block of data is moved), but definitely TRIM does not work on USB or Firewire. Not sure if the TRIM works on Thunderbolt connected readers as it does on disks SATA-path, however.
Speed included between slower and faster, however: USB 2.0, Firewire 400, Firewire 800, USB 3.0, love at first sight.
-
I want to know what is the best possible settings for energy management software.
Hey
I just buy lenovo b 570 e dual core laptop.I want to know what is the best possible settings for energy management software.Secondly, I want to know b 570 e score if one is to use it.Thank youconcerningNadineOriginal title: lenovo B 570 e dual-coreHi Nadia,
I suggest you to use your favorite search engine to find the best possible settings for energy management software.
If you are referring to the Windows experience index, I suggest you follow the links below and the update of the status of the issue.
What is the Windows experience index? :
http://Windows.Microsoft.com/en-in/Windows7/what-is-the-Windows-experience-index
Windows experience index:
http://Windows.Microsoft.com/en-in/Windows7/products/features/Windows-experience-index
I hope that the information above helps you.
-
What is the fastest processor I can use in my Dell XPS 400 motherboard DXP051
I currently have the Intel Pentium D 2.8 Ghz processor supplied with my computer in 2005. I bought an Intel Pentium D 3.4 Ghz (see info below) on ebay but I got an error message when I started my computer saying "incompatible processor detected. Is there something I can do to fix this? If not, what is the fastest processor that is compatible with this motherboard? And why is it so hard to find lists of compatibility?
Info on new processor:
INTEL ' 05
PENTIUM D
945 SL9QB COSTA RICA
3.40GHZ/4M/800/05A
3631 HAS 184
Not because the VRM on the motherboard not supported to 130w processors.
Processor Intel® Pentium® D with
Dual Core technology up to 820 CPU faster stop with unsupported processor Message.
(2.8 GHz, 2 x 1 MB, 800 MHz FSB)
Processor Intel® Pentium® 4 with up to 650 faster CPU will stop with unsupported processor Message.
Hyper-Threading technology
(3.4 GHz, 2 M, 800 MHz FSB)
Intel® Celeron® D up to 351 faster CPU will stop with unsupported processor Message.
(3.2 GHz, 256 K, 533 MHz FSB)Unsupported parts can be associated with 130W TDP.
The list of all has been tested in a GX 620 Mini lathe with power 305 w, Bios A11 and the
DELL Performance radiator J9761 (Version Heatpipe copper)
The Optiplex 620 TOUR WITH BIOS A11 works with all processors listed.
Processor Intel® Pentium® D 960
(Cache 4 MB, 3.60 GHz, 800 MHz FSB) 130 W
Processor Intel® Pentium® D 950
(Cache 4 MB, 3.40 GHz, 800 MHz FSB) 130 W
Processor Intel® Pentium® D 945
(Cache 4 MB, 3.40 GHz, 800 MHz FSB) 095 W
Processor Intel® Pentium® D 940
(4 M Cache, 3.20 GHz, 800 MHz FSB) 130 W
Processor Intel® Pentium® D 935
(4 M Cache, 3.20 GHz, 800 MHz FSB) 095 W
Processor Intel® Pentium® D 930
(Cache 4 MB, 3.00 GHz, 800 MHz FSB) 095 W
Processor Intel® Pentium® D 925
(Cache 4 MB, 3.00 GHz, 800 MHz FSB) 095 W
Processor Intel® Pentium® D 920
(4 M Cache, 2.80 GHz, 800 MHz FSB) 095 W
Processor Intel® Pentium® D 915
(4 M Cache, 2.80 GHz, 800 MHz FSB) 095 W****************************************************
Select the processor Intel® Pentium® D 840
(Cache 2 MB, 3.20 GHz, 800 MHz FSB) 130 W
Select the Intel® Pentium® D 830 processor
(Cache 2 MB, 3.00 GHz, 800 MHz FSB) 130 W
Select the Intel® Pentium® D 820 processor
(Cache 2 MB, 2.80 GHz, 800 MHz FSB) 095 W
Select the Intel® Pentium® D 805 processor
(Cache 2 MB, frequency of 2.66 GHz, 533 MHz FSB) 095 W -
What is the other possible way to reset the new hash in 12 c value
What is the other possible way to reset the new hash value in 12 c (edit user < username > identified by the values < "Hash" >; ?
Thank you
Suman
Thanks for all the help.
Problem has been resolved. There was little extra space (undesirable character in file) which has been provided by the user. Monday, I created a test user and manually run reset password and has worked well:
SQL > select banner version of v$.
BANNER
--------------------------------------------------------------------------------
Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production
PL/SQL Release 12.1.0.2.0 - Production
CORE Production 12.1.0.2.0
AMT for Linux: Version 12.1.0.2.0 - Production
NLSRTL Version 12.1.0.2.0 - Production
SQL > alter the test user identified by test2;
Modified user.
SQL > select name, password of the user$ where name = 'TEST ';
NAME PASSWORD
---------- --------------------
TEST A43C4E7D0745AB7D
SQL > alter user identified by the values "A43C4E7D0745AB7D" test
Modified user.
My apologies without testing on my side I asked a question here.
Thank you.
Suman
-
What is the fastest way to convert navigation app 1-level 2-level once a project has already been established?
You cannot change a project to change this setting. You will need to create a new project.
-
What is the best possible upgrade for a Dell Inspiron 545
I think buying a Dell Inspiron 545 to a friend. Now, I want that it works well on games like League of Legends, Garry Mod and Starcraft 2.
What is the best possible processor for this computer? Currently it has one - Intel Core 2 Quad Q8200 2.33 GHz to
The graphics card now it's a - Ge Force GT 620, y at - it another graphics card that would allow a better gaming experience?
I know I need a new power supply too.
Let me know what are the best possible CPU upgrades. :)
And if you have time how map/graphic power supply would work well?
Sorry if it was too much trouble.
Thank you very much. :)
-TrizairX
As a general rule, her upgrade CPU what whether it is compatible with the motherboard will NOT give you a lot of performance. The GT 620 is a low range GPU and there are a lot more mature. Check the video card review sites for options. You will also receive additional RAM if it is not already overexploited, usually more than a costly upgrade of CPU.
-
Satellite M30-S309 - what is the fastest processor for upgrade?
I'm looking to upgrade the CPU in my M30 and wonder, what is the processor the faster, in that I can put? I am very familiar with the guts of the PC and I'm comfortable replace myself, I just need to know what the fastest I can get is.
Any help is greatly appreciated!
Tom
Hello
Until you have created this topic, did you find it?
[Is it possible to upgrade the CPU or GPU of a Toshiba laptop computer? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=13]If you want to risk this update check the specifications of the other portable Satellite M30. If you can find one with faster CPU, maybe it will work also on your laptop.
But don not forget that the current CPU is tested in your laptop!
Welcome them
-
What is the fastest processor, I could put in Satellite Pro L20
It is a desperate help request!
Football Manager 2010 will come out soon and my laptop should be at the height.
I know that I need to upgrade because Football Manager 2009 almost killed it!At the moment I have Intel Celeron M 1.4ghz and 704 MB ram chip.
What is the song the fastest I could put in that? I did some research and found that I have only 2 GB of ram
The laptop is in perfect working order, so I don't want to buy a new one, just for fun he and its served me well over the last 4 years - I dropped it enough times! Just need to speed up a bit!
Hmm... You want really old enough Satellite Pro L20? I mean new laptops are more so expensive and I doubt that you will get a solid performance with the new CPU gain.
Anyway, in your notebook is only the preinstalled CPU pre-tested and nobody is able to say what other s CPU will run. But you should look on the specifications for other laptops Satellite Pro L20. If an another L20 is equipped with a faster processor, it should also work in yours. You can try it, but in the worst case, it will not work.
Good luck!
-
What is the fastest method producer consumer. Queue, RT-FIFO, event
Hi all
Another question completed for the pro:
I recently inherited the labview code that uses RT-FIFO for the transfer mechanism in the architecture of the producer consumer.
The code was first written in 3-4 years and is currently in LV8.6. It is possible that the reasons for the architectural decision no longer exists.
I am qualified using a producer consumer queued architecture,
I understand the RT-FIFO Architecture.
I started using an architecture based on events from the user.
(I have attached samples of each)
I also see the existence of a priority queue
Each method has its own capabilities and gaps, that hand, nobody knows the relative performance of each method.
(Assuming that the only process)
I would expect RT-FIFO to be faster, there seems to be a version of low characteristic of a standard queue.
What is the perfornace hit to use a coding user-friendly queue more
RT-FIFO description talks about commications between the time-critical and lower priority threads.
Until today, I thought that the queues had the same capacity.
I've included an event method that I commonly use for review by peers and help from other users...
It allows to:
1. several producers with different types of data
2. process 37 production order.
3 allows asynchronous verification of functional notifiers such as stop, start and abort.
4. in a system not real-time, it can include interactions of façade.
What I do not understand on this subject, that's what are overhead or thread priority changes that may occur using this architecture (it solves a lot of problems for me).
Thanks in advance,
Hi Timmar,
Here's a KB article on some frequently asked questions about the RT FIFO: http://digital.ni.com/public.nsf/allkb/7AE7075AF1B2C58486256AED006A029F?OpenDocument
The more relevant question is #4, I posted below.
What is the difference between RT FIFO and queues?
Functionally, RT FIFO and LabVIEW queues are two pads of first in, first out. However, here are the main differences between them:- RT FIFOs run deterministically in LabVIEW and evanescent code queues are not. This comes from the fact that queues use block calls during read/write to the resource shared, while RT FIFOs use non-blocking calls.
- RT FIFO are fixed size while queues develop when items are added to them.
- RT FIFOs will execute the code, even if there are input errors. They can (and will) produce new errors and spread the existing errors.
- Queues work with any type of data, while the data types that can be used with RT FIFOs are limited. Generally any type of data involving allocations of extra memory can be used with RT FIFOs to preserve determinism.
Let us know if you have persistent questions!
Ryan
-
When shooting in burst mode high with my 7 D Mark ii, I do not get optimal performance... the buffer fills up fast and backup... while I can't take shots more... I disabled the quite high definition noise reduction... Usually, I only have an SD card in the camera. I do not use the other card slot... is it because I didn't have the fastest SD card... For those of you who shoot regularly 7 D Mark ii, make it a point to always shoot with a SAndisk SD 95 map... ? I'd get better performance if I used the slot for CF card or both?
IRIS says:
I'm shooting with a single card (SD), a Lexar pro 64 GB 150 MB/sec Class 10 and 3 inside the U (whatever that means), but I show a limit 16 popping up on my screen... so I do not understand... I'm shooting a low ISO... I have disabled noise reduction... I'm shooting a Standard picture style... I'm shooting RAW only... My battery is charged... Then why is it backup and buffering so often? I forgot something? is it's just that the CF card is faster? .... I doh't understand why I don't get the perfromance promised high 20 + something burst shots...
First of all, Yes, CF cards are faster.
Second, the number you see is the current buffer and does not include the write speed of your card.
The only way to tell what your real brightness issue is therefore to test.
Shooting RAW to SanDisk Extreme PRO 32 GB 160 MB/s UDMA 7 CF Card, I get about 30 shots before the outbreak slows. My viewfinder shows 15.
Note When your feature of gust of defined test cards your lens to manual focus (MF) because according to your settings of priority to focus the camera auto focus can slow or even stop your glow.
-
Hi all
I have two query to find 2nd highest salary.
Please explain what is the most fast and why?
Analytic function:
Select * from
(
Select ename, sal, dense_rank () in the standings (sal desc order) of emp
) where the ranking = 2
Aggregate function:
SELECT max (sal) FROM (SELECT FROM emp WHERE NOT IN sal sal (SELECT max (sal) FROM emp)).
Thank you
"it depends".
The analytical function can recover all the data on the line easily, so you can see all the information of the employee for those who make the second highest compensation. I would probably use this one anyway, because it is more concise code.
Maybe you are looking for
-
where is my new button of the sidebar?
Hi guys, I've just updated Firefox to v.30but... I do not see the new feature "Button of the sidebar" as stated here http://betanews.com/2014/06/10/firefox-30-adds-new-sidebar-button-gstreamer-1-0-support-for-linux/How to set up?Thank you
-
Hello I tried to update the Intel graphics driver in my notebook using sp55098.exe , but the system returned the following error: "This computer does not have the minimum requirements for installing the software. I have the following: dv6-6b05tx lapt
-
64 GB Sandisk Ultra Microsd error 0x800701E3
HelloI've been using a SanDisk 64 GB Micro ACE for over 2 years and it was no problem. Recently, I am not able to copy all the files on the SD card that Ii can display the files, or even copy files already on the SD card on my computer. I cannot dele
-
error code 28, which means that all other currencies are works well
I have no idea what value for this field means even
-
Somehow Microsoft XPS Document Writer became the printer by default - I don't know what it is. We have an HP printer. We cannot go back. I need the Microsoft XPS Document Writer?