What is the fastest way to transfer files between two Windows 7?

Similar Questions

• The fastest way to transfer files between servers...

  I have a question regarding what would be the best option to accelerate the transfer of files between 2 servers to our VMware environment. We plan to spend our GroupWise email from netware to windows and upgrade to Groupwise (v7 to v8) at the same time. We will anticipate moving about ~ 125 gigabytes of data (files ~ 517 000) and expect that it will take several hours. We would like to minimize this time better we can so we wonder what would be the best configuration of things to get there? Two virtual machines on the same host? Two virtual machines on the data store even? On different hosts, or data warehouses? Our configurations are listed below:

  -In the course of running vSphere 4.1 ESXi

  -Data stored on 2 Dell Equalogic 5500 without

  -SAN one in each of the 2 sites, physically about 3 miles away

  -3 guests, 2 to a location and 1 in the other (same places the San)

  -Transfer of data from Netware 6.5 source, destination will be Windows 2008 R2 DataCenter

  -Links gigabit between all the elements of our VMware environment, including the link between the sites (on optical fiber).

  -3 guests are able to run all our virtual machines without overloading, so if we go to the virtual computer to another host, it is not a problem.

  We would like to know what is the best way to put everything in place for the transfer, so that we can prepare before hand. Any suggestions?

  Thanks in advance.

  Well, the fastest way would be to offload the clone/copy to the San operation. If your configuration supports VAAI then the clone would happen completely on the SAN by assuming that the source and destination storage device is the same SAN. Would it be different San then the network factors in anything. For what is running on the same host, which would be beneficial for cloning a virtual machine (mainly memory footprint) should not take place on the network.

  I hope this helps!

• The fastest way to transfer data between two Lacie Thunderbolt external HDs

  Hi all. I have a ton of music on a Lacie Rugged 1 TB Thunderbolt/USB 3.0. I use to mix. I have a Macbook Pro 15 "w 2015 / retina with Thunderbolt ports two (2) and I try to use it to transfer all the data from my Lacie Rugged drive to my new Lacie 3 to Desktop HD that was Thunderbolt (2) and USB 3.0 and use also the new Lacie Desktop drive as my primary for backups time machine.

  In order to transfer data from the rugged drive (THE most RAPID WAY POSSIBLE) on my new Lacie desktop drive I should? :

  (A) connect to each port thunderbolt on the laptop itself?

  Or

  (B) connect the Lacie Rugged HD to the new Lacie Desktop HD then the Lacie Desktop HD to the thunderbolt on the laptop (daisy chain) port?

  Thank you!

  MacWorld has done some tests on this and found a slight increase in performance with the devices connected directly to the laptop. So don't try Garland!

• What is the best way to transfer files from old to new computer

  I think of buying a new Imac to replace my 27 Imac K 27 5 two years old.

  What would be the best way to move my files such as e-mail, documents, music, photos, etc., with doing a complete Imac Imac transfer?

  I would like to start fresh with the OS and then reinstall all my program files, but some files to transfer.

  Any suggestion would be appreciated.

  Click on the following 2 links:

  https://support.Apple.com/en-us/HT204350 move your data to a new Mac

  A new Mac set up an ancient, its backups or PC

  

• What is the best way to transfer files to an external hard drive?

  I would like to clean my laptop occasionally so that the hard disk gets more than half full, because I run a large number of graphics and good programs, my fan has some mental problems then he goes crazy. The problem now is that my external hard drive is that of 500 GB and now it's almost half full. I tried to use the files zipped, but honestly, there's just a huge amount of time to compress something (which by the way, why windows excludes a zipped folder more?) and the file gets that much smaller. Should I use another form of compression program?
  A Briefcase is not a substitute for a zipped folder?
  Thank you

  ". . . I can't even afford a good 1 TB hard drive. »

  Whenever you are able to buy another external drive, get not necessarily the least expensive (unless it's a more expensive player for sale). If these backups are valuable to you, go the extra cost of a high quality unit.

  It seems that you pretty much a backup solution, you're just trying to reduce the time it takes. I understand perfectly with having six physical computers, but four of them use SyncToy to keep the two main desktop computers in sync so I only have two I actually backup; I picture all six, but much less frequent that my backups (copies).

  If you try to compress large video files (of the order of GB), I can see where this would be extremely slow and compress probably not as much as you said. In the past, I use to make a copy of zip each of my web sites periodically to check them with one of the order of 1 GB, which took forever.

  ", I don't really like having a bunch of useless files"

  Have you tried the free version of CCleaner? I use it and it keeps a pretty simple enough clean machine. If you have not heard of him or tried, see my post about it in the thread below.

  The temporary Internet files folder
   http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/temporary-Internet-files-folder/c7f4ab88-D4Ea-4114-8935-9d736508cca8?tab=mysubscriptions#tabs

  You are welcome and hope you enjoy your visit here in the United States.

• What is the best way to transfer files from e-mail Mozilla Thunderbird to Gmail on the same computer?

  I had to use Mozilla Thunderbird as a program of temporary email and now re - transfer email to Gmail about files. How can I do this simply and effectively. I'm not a computer specialist. Thank you, Bill

  A question for Thunderbird support or their forums

  Maybe this helps;

  http://email.about.com/od/gmailtips/Qt/How_to_Import_Mail_from_Mozilla_Thunderbird_in_Gmail.htm

• What is the best way to transfer your license of Windows product key when you sell your older hardware?

  Hello

  I wanted to just see what others suggest, when planning on the sale of your more old hardware to family or friends and ensure the maximum payment and trade-in value.  I have a laptop that I will probably remove the Windows operating system and installs an open source OS top. I intend to sell the laptop of the family, and I'm little warily to get paid as much as I want for her.  I think that one option could be to remove the product key sticker, until I paid, and then send the product to them key sticker separately or is it really important and should leave the sticker on the computer because the laptop was first recorded in my name and my address.  I read your suggestions on how to handle this matter. THX ;)

  You are not supposed to do. License is part of the machine, remove the sticker isn't fair, since you sell the machine, the license must be sold with it.

  In addition, you cannot use the license elsewhere.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

• What is the best way to transfer the file to a new larger internal drive?

  I am running win 7 ultimate.  I had two hard drives of 500 GB.  C is partitioned to 120 GB (not enough) I just installed a 1.5 terabyte drive.  What is the best way to transfer my data? I would keep the 500 GB (now C: and D :) and add the 1.5 to, I also have a 2 external to that I tried to move my libraries at, but I'm confused my system.)  I don't know much about indexing or mapping.

  \

  Consider transferring all the files that are currently in the second partition of 500 GB drive that is hosting the C: drive (you have referred to as D :) on the new drive.

  Once you have done this, you can then delete the D: partition since this 1 hard drive. This would then extend the C: drive to actually use all the 500 GB drive. Finally change the drive letter for the 1.5 terabyte disk d: it in disk management ( Diskmgmt.mscRun)

  So in the end you have a 500 GB C drive and a 1.5 TB drive D.

  When it comes to move libraries Windows has a utility to do it for you. If you click on your username at the top right of the menu start all your user profile directories are displayed. If you right-click on each one and select Properties, those that support this feature will have a tab 'location '. In this tab, it displays the current location of the file, but has a button "move". You move the folder and all its files and subfolders in a new location and update the references, the system uses for this folder.

  So if you created a folder on the D drive say 'Juli-year' and you right-click on Favorites, some properties, then on location you can move this summary folder in C:\Users\username\Favourites to D:\Juli-An\Favourites. Not all folders in the user profile supports this but all the c library files and a few others.

  Of course if you did as I suggested and ended with a 500 GB C drive you may need.

• What is the best way to transfer pictures on my desktop of my Olympus D-425 digital camera

  What is the best way to transfer photos on my desktop

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

• What is the best way to transfer pictures from an old computer to a flash drive or a drive back then to a new computer?

  What is the best way to transfer pictures from an old computer to a flash drive or a drive back then to a new computer?

  The easiest and most reliable I've found is to make the direct drag-and-drop method.

  (1) on the old computer, open your Windows Explorer and go to your photos.

  (2) open another Windows Explorer window and access your 'Computer' folder and in your flash drive

  (3) drag the photos to the flash drive.

  (4) take the flash drive on the new computer and drag them into your images folder

• What is the fastest way to convert navigation app 1-level 2-level once a project has already been established?

  What is the fastest way to convert navigation app 1-level 2-level once a project has already been established?

  You cannot change a project to change this setting. You will need to create a new project.

• What is the best way to transfer a hard drive of a computer with a motherboard dead to a new system?

  Moving an Installation of Vista

  Hi guys (and girls).

  I'm looking for the best way to transfer my computer drive "workaholic" into another machine... it's a Vista Home Premium x 86 OEM installation, but the motherboard has serious problems, so I'll pulling the reader (and its programs of many irreplaceable and owners) and transfer it into another machine. Yes, I know what are the rules regarding OEM licenses and I don't mean to skirt the rules, as I have a full VHPx86 commercial license collecting dust on the shelf that I was going to use, while I was looking for advice on the transfer:

  Should I go through the process of installation/installation (and following key change) on the original machine and transfer, then the drive in the new machine?

  Or can I move the disk to the new machine as that is, struggle with the driver updates and enter the new key when I reactivate the license?

  Thanks for any advice,

  JAM

  I suggest to install the copy retail hard disk once it's in the new computer.  It is more complicated than simply changing the product key.  You can probably use an upgrade of the repair on-site and avoid having to reinstall your programs and data.  However, you should make a backup of the image first, just in case something goes wrong.  The other option is a clean installation of the new OS and Windows Easy Transfer to move your files and settings.  It would need to reinstall your programs.  Personally, I recommend the latter.  If you go this route there are external to the file migwiz drive since you will be formatting the drive.

• Just ordered new MacBook Pro. What is the best way to transfer Photoshop, InDesign

  I just ordered new MacBook Pro. I need to transfer files and applications from my old to my new MacBook.  What is the best way to do this with the least time involved? I have our serial numbers for Photoshop and InDesign available group license.

  Thank you

  Please see CS5 download products

  Hope that helps!

• What is the best way to use files recovery

  I work in FM 11 and broke FM a few times. What is the best way to use the recovery files and save them as normal files? So should I filter a window of the Explorer to "recovery" so FM don't ask me if I want to use the older recovery files? Thanks for your help.

  > What is a wash of the MIF?

  1. Save all the files of FM component .mif as MIF format.
     Save the .book as. book.MIF in the MIF format.
  2. Output FM.
     Restart FM.
  3. Open .mifs. Save as FM, replacing the old (FM probably saved files).
  4. Open the. book.MIF, re - register under .book.
     Note: do not open the. first book.MIF and then try to open the component files, or open the files binary pre - MIF.

  FM11 and 12 can have a free add-on as much as the fact in a single operation.

  Washing MIF creates new .book files and FM have syntactically correct data structures (and that may have lack of bad content). They are less likely to crash, but can still have problems.

• Just bought a new Apple computer. What is the best way to transfer the CS6 and Lightroom

  Just bought a new Apple computer. What is the best way to transer CS6 and Lightroom? Both applications have been updated. Should I reinstall it on the Adobe site?

  first of all, if you're going to retire this old computer or, at least, no longer use your adobe on this old computer programs, open and click Help > deactivate.

  then install your files to your new computer and activate.  If you already have an installation cd, you don't need to download.  If you don't have the installation files, download the trial and activate it with your order number.