What is the level of the HP Jet 7 Tablet DirectX?

Hello world!!!

Anyone know what is the level of DirectX (or function) of the HP Jet 7 Tablet? I've looked everywhere and there is no information about it. The fact that I found is that the HP Jet 7 Tablet has an Intel HD graphics card, and that I should assume is either level 9.1 and 9.3 (if I'm lucky). I would like to know before I rush to the store to buy a.

Any help is greatly appreciated!

Tetai Ik

DX 11.

Tags: HP Tablets

Similar Questions

  • What is the best current android tablet to test our Pub on?

    Is about to start testing our publication on android. IM mainly an IOS so looking for suggestions for a better test on the user?

    Any suggestion would be appreciated.

    Honestly, I wouldn't bother getting a tablet. Instead I would get a phone and test your content out there, even if you probably designed for Tablet. There are many more Android phones in the world and we have put a lot of effort to ensure the content tablet makes and works well on phones. If you check on the phone you'll be fine with the content on tablets too.

    I use a Moto X (2nd generation) for the test. It is a good phone for what works the latest OS Android. If you really want a Tablet, I asked one of our testers, and she suggested the Nexus 7.

    Neil

  • Where are the drivers for HP Jet 7 Tablet - 5701na?

    It seems that HP have pulled the drivers for the HP Jet 7 Tablet - 5701na... I downloaded the wireless BIOS a couple of days and stupidly didn't have them locally, now, a few days later, I return to the site and no driver is listed for this model!

    Anyone know where I can get these drivers?

    Hello:

    Unfortunately, the support pages do not work for most new PC HP.

    It has been like this for about a day now.

    Since I'm not employed by nor do I represent HP, I do not know when they will have pages working again.

    Come back again later.

    With the Independence Day holiday in the USA weekend, I wouldn't wait it to be taken care of immediately.

  • What is the level of output voltage of the NI 622 X

    There is no clear definition of the level of output voltage of cards X NI DAQ 622 in the spec.

    Are they drain open output? What is their level of voltage? The programmable ETC, voltage level is able to be configured to 3.3 or 5V?

    Look at the graphs on page 8.  This is not the usual way of Voh specification, but is is very informative. Other charts display different values from the DMV.

    Lynn

  • HP officejet 5740: what is different between the office jet 5740 and the 5742

    My HP 4632 just died 1 month warranty.   Looking for a new printer.  This model still sells... but Amend for the price was a great ptinter.  Looking to buy another printer...

    What is different between the office jet 5740 and the 5742

    Hello Izzy1211dw,

    The difference between these models (and the 5745) are content to include the box according to where you buy, like maybe one of these models can have the USB cable included in the box, which is not the other.  It is a HP reseller application, but in regards to the product specification, they are the same.

    You can see the specifications for each of them in these links:

    Printer support e-all-in-one-HP Officejet 5740

    Printer support e-all-in-one-HP Officejet 5742

    Printer support e-all-in-one-HP Officejet 5745

    I hope that answers your question.

  • What is the difference between the service SmartNet and SMB level

    Good afternoon

    I would like to ask if what is the difference between Cisco SmartNet and Cisco SMB service level?

    Thank you

    Hey Rey,

    SMARtnet covers traditional Cisco products (products of the company IE.) ISR routers), Small Business Support Center covers the line of small business.

    In the Group of the UC products, for some reason, Cisco believes the UC520, AP521, and WLC526, which are small business to be traditional Cisco products and brand SMARTnet are covered. But, the UC540 and the UC560 are covered by HWC. A major difference in the area of the CPU is the support for CLI vs CCA config.

    However, I noticed your message in small business - class switches. If you have a switch of small business people who are covered by HWC not TAC. HWC will support the CLI and web gui configuration of switches in small businesses, where the CLI is applicable to the model.

    HWC contracts tend to be 3-year periods and can be significantly cheaper than SMARTnet agreements.

    Hope that helps.

    Best,

    David

    Please evaluate the useful messages and identify the right answers.

  • What is the need for accessors from view at the level of the entities, as well as the view object level?

    Hi all

    What is the need for accessors of the entity and object level view-level view

    I use 11.1.1.7 jdev

    Thank you

    Delphine

    Timo, I think you might have taken the tack wrong here.  As you know EOs can use VO * accessors * (not associations) like your for things like validation entity or object view research

    CM.

  • What is the fastest way to convert navigation app 1-level 2-level once a project has already been established?

    What is the fastest way to convert navigation app 1-level 2-level once a project has already been established?

    You cannot change a project to change this setting. You will need to create a new project.

  • (1) now I use Lightrom 5.7 How to level 6 or CC? (2) what is the difference between the 6 and CC vercion? (3) when I used lightromm 3, inEXIF the distance in metres to the object that I took, in the virsions later that the function has disappeared, I coul

    (1) now I use Lightrom 5.7 How to level 6 or CC?

    (2) what is the difference between the 6 and CC version?

    (3) when I used lightromm 3, I could see in EXIF distance in metres to the object that I took, in the virsions later that the function is missing, it is very sad I am stiil waiting and I hope it would be possibble in new versions. Or this indication may possible by setting?

    (1) now I use Lightrom 5.7 How to level 6 or CC?

    Buy the standalone update from here: products

    Download CC version here: Adobe explore desktop apps | Adobe Creative Cloud

    (2) what is the difference between the 6 and CC version?

    See this comparison chart: Lightroom compare versions. Adobe Photoshop Lightroom CC

    (3) when I used lightromm 3, I could see in EXIF distance in metres to the object that I took, in the virsions later that the function is missing, it is very sad I am stiil waiting and I hope it would be possibble in new versions. Or this indication may possible by setting?

    Plugin ExifMeta of Rob Cole displays the distance between the subject field (and much more).  Unfortunately, his Web site seems to be down again.  He has been very active here, but he has not posted in several months.

  • What is the last level of patch bundle for x 3-2 exadata machine? How to find the doc?

    We have a x 3-2 exadata machine. I have a question: what is the last level of patch bundle for x 3-2 exadata machine? How to find the doc?

    Thanks in advance.

    Check note id 888828.1

    It has all the information you need.

  • What is the security level of a signing of pdf from Adobe? How is difficult to break? It is similar to a md5?

    What is the security level of a signing of pdf from Adobe? How is difficult to break? It is similar to a md5?

    Software can crack the document.

  • When you draw paths, what percentage of level best to see the image?

    Hello

    When drawing paths in the PS, which is the best level increase percentage to display the image? I find that 200 to 400% is sometimes useful, but sometimes 300% is too big and the edges of my selection become indistinguishable from the background. What are the techniques of zoom percentage that others use all pulling the railways?

    Thank you.

    Patrick

    Patrick, the answer is that it all depends on what you're trying to isolate, how you plan to use and how fast you need to do. I will describe a couple of scenarios.

    If you are knocking out 25 pictures of products, you need to go fast. Some studios will order their retouchers remain with zoom at 50% only. For general color/brightness, no drama, describing changes a form on this scale will be fine. The resulting mask will not be perfect, but it will go faster than the zoom to 100% because you will be with less detail.

    If you need a little more precision, zoom and more. So the question is: where to place the path on the edge of the element you want to isolate.

    If you plan to break the clip from the bottom, then place the path inside the border of the element. As long as you're fairly accurate, the fact that you can cut the edge pixels will be not easy for the Viewer to the end. It's better, because you can trim off the coast, say, clothing fabric in excess and idealize shape more. When hit against a new background, the shape will be better and no one will notice that you have trimmed it anyway.

    If you plan to keep this element in their existing background environment, you have to be more specific. As you say, you could perform a current zoom 100%. I'll generally not much past plu 150% because we always need to take a view of the overall shape, the forest from the trees so to speak. In this case, you'll want to put the path in the pixel areas liminal along the edge - right between where you see the transition of the element edge pixels and the background. If you make dramatic changes hue/lightness, you will need to massage the mask edge later to reduce the edges that appear.

    And don't forget to put a small feather on the resulting mask is always the key.

    Hope that helps, check out my blog if you are interested to learn more about the techniques of cutting, I'll post some in the future.

  • What is the secret behind the cache level?

    Hi, I have a question about cache levels...

    OK, as we know, Photoshop creates several (smaller than the original) preview images to show the effects and create histograms. So, I think that if I choose the cache level 1 in the preference window, Photoshop does not any glimpse and it always displays information according to the original file. Is this wrong?

    But this isn't the case, I see. I updated my cache level 1 and it still shows the histogram for level 3 of the cache.

    So, my question is... What is the secret behind the cache level?

    There is a bug with preferences level underneath Windows.

    Try to set in the 32-bit application, then leave then to revive the 64-bit application.

  • What is the difference between levels 1 to 4 of the performance monitoring? What is the default level?

    What is the difference between levels 1 to 4 of the performance monitoring? What is the default level?

    Collection and levels of collection intervals are two things that are used to monitor and collect statistics of performance for entities.

    Research in detail what intervals of Collection and collection levels mean:

    Collection intervals determine the duration for which the statistics are gathered. VirtualCenter currently has four intervals of collection: day, week, month and year.

    Every interval between two collections has a default collection level that determines how the counters are used when collecting statistics. Default collection-level is set to 1 (because the minimum number of counters). This level is configurable and can be set from 1 to 4.

    For more details on the intervals of the collection and the collection level (with respect to the measurements taken at each level), please see the "Collecting statistics" section, page 281 base System Administration Guide.

    http://www.VMware.com/PDF/vi3_35/esx_3/R35/vi3_35_25_admin_guide.PDF

    Hope that the information above will clarify your doubts regarding the level of default collection and what they mean.

  • What is the need for level 0 and level 1 backup?

    I am a bit confused about the need for level 0 and level 1 backup. Oracle has proposed strategy in 10g creates only level 1 backup continues to not to break and not to create any level of 0 after the first backup of level 0. But I had seen in the document Oracle Database Backup & Recovery basis he suggests to create backup of level 0 on weekly or monthly basis. There?

    Secondly according to my understanding when creating oracle backup of level 1 first creates a level 0 backup that contain also copies of data image files and then apply an incremental copies of the image, once the incremental backup is applied on the copy of the image you don't have to the previous incremental backups. Am I wrong?
    If I'm right, what is the difference between level 0 & backup of level 1? and after the level 0 backup you must also all previous backups.

    PL. help me to clarify my questions in this regard.

    Kind regards

    Vassallo

    What is the most reliable in terms of recovery?

    I do not see the differences in terms of recovery, the two strategies are reliable.

    There is an advantage in terms of recovery time expected, Oracle says:

    /*
    Incorporate gradually update the backup in your backup strategy shortens the time of recovery as provided. The reason is that media recovery right now or at some point in the recent past may begin at the time of the last backup of level 1 applied, rather than at the time of the last full database backup.
    */

    In a regular incremental backup strategy you always go back to a level 0 backup and then to apply everything follows level 1 backups + archivelogs. But - for an incremental backup set to day - it's a little tricky to emerging a window of recovery, normally relies on redundancy 1, i.e. that a backup is retained, you cannot go back, this type of backup is designed for a quick and complete recovery.

    But there is a solution (I don't think there is place in EM), even if you're on 10g, see the 11 g documentation, he explains fuller:

    http://download.Oracle.com/docs/CD/B28359_01/backup.111/b28270/rcmbckba.htm#BRADV89532

    Werner

Maybe you are looking for

  • resolution retina MacBook display and external

    I have a MacBook to the retina 12 inches early 2015 with a multiport Apple USB - C card that has a HDMI connector. I am using a monitor Dell 27 ' u2713hm with a HDMI cable. However, the display preferences do not allow me to set the resolution. I hav

  • Problems Photoshop CS6 with El Capitan

    I just upgraded my iMac and I now use El Capitan. I want to continue to use Adobe CS6, Illustrator seems ok so far, but Photoshop is pretty sticky, and many of the keyboard shortcuts are not working do not, or only work occasionally. Does anyone know

  • connect win 7 Home Prem Pavilion to the existing network of 98/xp

    Try adding a Win7 Home Premium 64 HP Pavilion to an existing Win98 and WinXP computer network. He can see the Internet through the router and switches, but not the rest of the network. Is it possible so he could see the local network?

  • Fax machine, do not leave the machine to pick up.

    Have a 7520 HP printer all in one. I have a phone/answering machine plugged into the rear 2EXT port and the other phone cord supplied with the printer in the other and it goes on the phone jack in the wall. I have problems with the fax machine pick u

  • try to get to windows 8...

    I may be misinformed, but printing that I can't buy a version full of windows 8 for my computer laptop w7j xp... It was suggested to get windows 7, then buy an 8 update. It's a fairly simple operation to move from xp to 7? (I'm used to go under the h