What is the mainboard on Satellite Pro M30 productnumber?

Hello

I need the Productnumber motherboard for my Satellite. Modell Nr.: PSM35E-000NU-GR

Thank you.

It is not easy to find that information except you will try to ask Toshiba service in your country. They have access to the database of Toshiba s and can help you about this.

In any case, trying to verify the number P000400260. It should be the correct order number.

Tags: Toshiba

Similar Questions

  • What memory RAM for my Satellite Pro M30?

    Hi all ;-)

    I have a M30, bought to the Netherlands. It currently has 512 MB of RAM installed (by default when I bought it). I would like to update, but I do not know what a memory to him. I've downloaded the manual, but that does not specify the type of memory, it just says: "max 2 GB, 2 slots, 256, 512 MB or 1 GB. But what type do I have? Like DDR or DDR2, and how fast?

    Thank you in advance for an answer,

    Kind regards

    Nick

    Hello

    According to the specifications of the laptop are the compatible RAM modules:
    PC2700 512 MB (PA3312U - 1 M 51)
    1024MO PC2700 (PA3313U-1M1G)

    Use the number in part for research in Google.
    Good luck!

  • Re: What position the caddy a Satellite Pro 6100 use?

    I recently acquired one of the old machines out there I have an I was wondering where can I get the internal carriages of?
    Second, this model uses a hard drive spindle adapter?

    Thanks in advance!

    This SP is very, very old model laptop so I put t think you can order somewhere try to check eBay. You will find lots of different parts for old models of laptops. In the worst case buy a defective SP 6100 and use it for parts.
    > Secondly, this model uses a hard drive spindle adapter?
    I n t think so, but you can check it yourself. You can remove very easy HDD. HARD drive cover is fixed with a screw. When you remove the HARD drive cover, pull the disk block HARD on vinyl of the HARD drive battery handle.

  • Satellite Pro M30 - Win XP - for the brightness of the display FN keys do not work

    I just do a fresh install of win xp on a satellite pro M30 laptop.
    I installed the drivers bt the fn keys (brightness, etc.) will not work if the screen is very dark!

    I tried to update the bios, but it won't let me.
    Also tried to install the common modules but get an error saying that it didn't is not supported on this hardware!

    Can someone please help.
    I think you need to install the drivers in a specific order.
    Is this true? Or y at - it way round this?

    Any help would be appreciated.

    > I tried to update the bios, but it won't let me.
    > Also tried to install the common modules but get an error saying that it didn't is not supported on this hardware!

    To me, it seems that you tried to install applications that are not compatible with this laptop.
    Where did you get the drivers?

    On the European driver of Toshiba in archive page, you can find the drivers for Satellite Pro M30

  • Satellite Pro M30: new HARD drive - what is the max capacity?

    Hello

    My Toshiba Satellite Pro M30 is 4 years old with a 60 GB hard drive (IDE).
    I would like to replace the hard drive with a bigger. What is the best? (BIOS version 1.70, Windows XP Pro SP 3).

    I would be happy not only to get the answer to my question but alos to where I might find the answer myself.

    Thanks and greetings
    waltgallus

    Hello

    As far as I know the laptop is equipped with an ATA-100 IDE / ATA-6 HARD drive controller.
    In this case, you will need to use the 2.5 IDE HARD drive.

    I know with certainty that this notebook would support 80 GB HDD, but generally a larger HARD drive should also be possible because the controller is able to manage the 48-bit LBA.
    The 48-bit LBA can handle hard drives of more than 120GB.

    In my opinion, you can try a 120 GB and also 160 GB HARD drive should be possible.

  • Satellite Pro M30 series deactivates the WLan connection

    I have an old Satellite Pro M30 series. Whenever I turn on the wireless signal, the computer closes its doors.
    I assume that the driver's latest version.

    I'm not known for that Yes, there is someone out there who can advise me on where to find the latest driver and install it.

    Assuming this is the problem.

    Thank you
    Gibbsey

    > spend a lot of time on the wireless signal, the computer closes its doors.

    What do you mean exactly by farm down?
    The laptop turns off automatically once the WiFi (switch) card is turned on?

    I put t think this would cause obsolete WLan driver, this sounds like a hardware problem.
    In case it of not possible to use the internal WiFi card, I recommend to use an external USB WiFi dongle.
    Would be the best option

    PS: all the drivers for old Toshiba laptops are placed on the page of the Toshiba UE driver.
    You will need to search the archives (in the product Type click Archive) for a list of the old series of laptop computer.

  • Satellite Pro M30: Where to find the new battery

    Hello

    I think I need a new battery for my Satellite Pro M30. When the battery is fully charged, it will be only for a few minutes. The light comes on when connected to AC so I know that it charges.

    I guess my battery died (I had the computer for almost three years now) and I need to get a new battery. Problem is, I don't know where to find it. The Toshiba homepage doesn't seem to provide.

    Is anyoine knows what to do?

    Thaks!

    Hello

    Your suggestion is right! This really looks like a dead battery and replacement is necessary.
    So, you know the details of the battery?
    Usually, batteries compatible and taken in charge are listed on the Toshiba site Options & accessories.

    I found this site on the European site of Toshiba:
    http://EU.computers.Toshiba-Europe.com-> product-> Options & accessories
    Here, you can choose your laptop model and you will get a list of compatible parts

    Oh compatible parts you can order the ASP in your country.

  • RAM 1 GB upgrade will increase the performance of the Satellite Pro M30?

    My ram size is currenty 512 MB.
    I have the model Satellite Pro M30.
    As the old model, my laptop would be faster if I increase to 1 GB

    Hello

    Of course, the 1 GB of RAM would help increase the performance of your laptop.
    It must be useful for faster loading applications.
    You will notice also that your tools and other software will be faster.

    To upgrade to the 1 GB RAM, you would need two 512 MB modules.
    Usually the PC2700 DDR - RAM 512 MB module must be compatible.

    Welcome them

  • Satellite Pro M30 - where to get the new motherboard

    I have a sat SPM30 Pro PSM35E-0023J-FR model with a video fault.
    Anyone know where I could get a new motherboard?

    If anyone has a similar model with other damage that they might want to sell on. All I really need is the motherboard.

    Hello

    New parts can be ordered from the local ASP.
    But be aware that a new motherboard is not good cheap. You will need for a replacement of the mobo 300Euros.
    I think that it s not worth buying a new motherboard because you could add a few Euros and might get a new laptop.

    However, you can view some websites like Ebay for example a satellite M30/Satellite Pro M30 of second hand. Perhaps you could get a second hand mobo

    Good luck

  • Satellite Pro M30: buttons on the front don't do media control

    Buttons on the front does nothing when the machine (satellite Pro M30) is disabled or order the multimedia. Is there something I need to do to configure, or is it a hardware failure?

    Hugo

    Hello
    to perform the General music in "offline" mode, I pushed and hold down the Mode button until the blue LED on the CD symbol lit up on the front.
    After that I inserted a music CD, and portable he played very well in "offline" mode

    But this time I had to study the manual actually.

  • Can Satellite Pro M30, you help me how I can connect the wire of the COM series?

    Dear Sirs,

    Can you help me how I can solve my problem:

    I have TOSHIBA Satellite Pro M30 computer and as you know there is no Serial Port COM in this model.

    Can you help me how I can connect the wire of series Com (SR232 DATA)?

    Where I connect on the updated satellite of reserve.

    For your information I have is also trailer male sides.

    Concerning

    Ali H. Ba - Aqeel

    [email protected]

    Hello
    you´ve got the alternative to get a PCMCIA Serial Port adapter.
    The Installation was easy to my laptop and runs without problems under Windows XP and 2000.

    Have a try.

  • Satellite Pro M30 - error message: the user is not authorized to update BIOS

    Hello

    I bought a Satellite Pro M30 of second hand. This one has the Bios 1.30... I would like to install the bios v1.70.

    I am running Windows XP Pro SP3 and tried first update in Windows.
    I however got the message "the user is not allowed to update BIOS.

    This message is quite surprising given that I have administrator privileges.

    I read that you can use a floppy disk to update, but I did not...

    So, is it possible to update the Bios with the CD?

    See you soon,.
    R.S.

    Hello

    I checked the page European driver of Toshiba and found the version of BIOS 1.7 WIN in the field of ARCHIVES.

    As you can see, it's a version of BIOS Windows and not a traditional version of the BIOS (trad BIOS can be updated using the diskette).
    This BIOS win can be improved only from a running OS Win.

    In any case, I see that you have installed SP3. It could have a bad influence on the update of the BIOS.
    Then maybe you should try to update the BIOS without SP3 installed?

    Remove SP3, download the good BIOS, unzip correctly and then try to run the BIOS update file.

    _Ps: If you laptop then runs without problem a BIOS update is not necessary! _

    Concerning

  • Satellite Pro M30: Where to find the BIOS for download

    I'm looking for the new version of BIOS to my laptop.
    When I go to driver download site I can see only Satellite Pro M70 downloads but not by Satellite Pro M30.
    Where can I find the version of the BIOS, My F keys do not work and maybe the new version fix it (BTW I use XP SP3)

    Hello

    It seems that all drivers for some older series of laptops have been moved to ARCHIVE.
    So please first select the Archive.
    Then satellite Satellite Pro Pro Satellite Pro M30 M

    There, you can find all the drivers and BIOS.

    BUT NOTE; the update of the Bios will not help you to get the Fn keys work.
    You should first try to reinstall the * common Modules *, then the * utilities Hotkey for display devices *.

    Welcome them

  • Satellite Pro M30: Question on the new RAM

    Hello!
    I'm going to upgrade memory RAM.
    Is this ok, buy 2 x SO - DDR PC2700 0512 MB Kingston [KVR333X64SC25-512] or 2 x SO - DIMM DDR 512 (pc-2700) Transcend?

    Thank you.

    Hello

    Satellite Pro M30 supports these modules;
    PC2700 256 MB (PA3311U - 1 M 25)
    PC2700 512 MB (PA3312U - 1 M 51)
    1024MO PC2700 (PA3313U-1M1G)

    PA3312U - 1 M 51: RAM SODIMM 512 MB DDR 333 MHz/PC2700

    You must use the Toshiba recommended memory modules and you have don t use all modules of no name.

  • Satellite Pro M30 graphics works not when the driver is installed

    Hi all

    I m having problems with my nvidia Geforce FX Go5200, in a portable Satellite Pro M30, (processor Intel Pentium M 1.7 GHz, 512 MB Ram). This card was working fine suddenly the laptop stops.

    I formatted the laptop and installed Win XP PRO. After installing the driver VGA, I restarted the laptop, but black screen started to come right after the Win XP splash screen appears. The laptop continues to start up but no screen.

    It starts fine in safe mode. I get my best screen simply by disabling the geforce card or uninstall the driver. I tried to install a new driver for the VGA on the download from Toshiba site, but same problem appears. I also tried the BIOS update but nothing happens.

    Can someone help me?
    [email protected]

    It's very strange question. It will be really interesting to know if this happens when you use the CD delivered recovery facilities.

    In any case, I assume that there is a problem with the LCD display. In safe mode, the desktop appears in the resolution decreases but the resolution to the OS boot will be suitable for a standard (1280 x 800), and of course, there is the problem.

    I am not a technician, but I recommend you contact the Service partner. AFAIK they use special tools and programs for display tests. They can tell you more.

Maybe you are looking for

  • Block outbound connections

    Hello, I want to know how to block outbound connections on my macbook 12 using MacOs Sierra. In the firewall, I have found that I can block incomming connections. I missed an option? How can I do Terminal form?

  • pop-up that won't go away

    I have a popup that appears in Add format telling me that I need to update Viewer window to continue. I don't believe and suspect it is a Trojan Installer. I use 25.0 and I uninstalled the program and reinstalled it. The popup appears when I hit a li

  • HP Pavilion p6510y not getting display, so that ever!

    HP Pavilion p6510y Windows 7 When I turn on the Office seems to work very well the lights are on, but it seems not to send anything to the monitor. I tried I tried the monitor with another computer and it worked fine it's not the monitor. I also even

  • Motorola phones.

    General question: Future motorola phones available in local stores? beacause in India there are hudge asks for motorola phones.

  • Could someone provide a network test tool because eclipse network problem?

    Operating system: Windows XP Problem:Momentics_tool/Flash 1.Eclipse/QNX Builder cannot sign a key, the software update, orinstall new software. Error code:1. search for: failed to updateSome sites could not be found. See the errorlog for details.Unab