What is the Mode of operation WRT54GS?


Fix.

Router mode = disabled NAT
Gateway = NAT active mode

This should be the main difference. Sure, it has some effects on dynamic routing (RIP) because with active NAT routes from the local network will not be published and sent to WAN.

As long as you have your installation gateway mode should work fine, regardless of the BEF. But it is impossible to say without knowing the exact configuration you are trying.

Tags: Linksys Routers

Similar Questions

  • What is the Mode "PDF/A?

    Greetings,

    When I open a specific PDF file, a blue bar comes up saying "you can view this document in PDF/A mode." What is the mode "PDF/A?

    I use Adobe Reader 9.3.1 on Windows 7 Home Premium.

    Thank you

    Shane.

    Read this:

    http://en.Wikipedia.org/wiki/PDF/A

  • What is the order of operations

    Where can I find the order of operations that are evaluated by the Oracle database? I mean, for example, for a query like this:

    Select an element, rank on (partition of order in...) r

    from t1, t2

    where t1.x = t2.x

    and t2.other_something = 'value '.

    order by 1;

    We can say that: "order by" going to last, "rank" works on lines after that the paintings are "United" and "selected". So in a sense, there is an order of operations. I understand that the actual order of operations when execution can be different if optimizer concludes on an equivalent, alternative execution plan. But what is a sort of operations of op "basic" order Oracle follows "to understand" the request even before trying to understand the alternative form. Is there such a list of order of operations?

    Thank you

    Hello

    946279 wrote:

    Where can I find the order of operations that are evaluated by the Oracle database? I mean, for example, for a query like this:

    Select an element, rank on (partition of order in...) r

    from t1, t2

    where t1.x = t2.x

    and t2.other_something = 'value '.

    order by 1;

    We can say that: "order by" going to last, "rank" works on lines after that the paintings are "United" and "selected". So in a sense, there is an order of operations. I understand that the actual order of operations when execution can be different if optimizer concludes on an equivalent, alternative execution plan. But what is a sort of operations of op "basic" order Oracle follows "to understand" the request even before trying to understand the alternative form. Is there such a list of operations?

    Thank you

    No, I've never seen any kind of official list like that, no doubt because, as you say, the optimizer does not follow these rules; the optimizer has done what he thinks is the fastest way to get the results that you specified.

    It may be useful to imagine things in the following order:

    1. Subqueries
    2. Joins (including the join in the WHERE clause conditions)
    3. PIVOT and UNPIVOT
    4. START WITH and CONNECT BY clauses
    5. WHERE clause
    6. Clause GROUP BY and aggregate functions
    7. HAVING clause
    8. Analytic functions (for example, RANK)
    9. ORDER BY clause

    Again, this has the same relationship to what actaully goes according to the drawings of atoms you see in science books have to the real atoms.  It can help you to remember (for example) that an analytic function (n ° 8 in the list above) may rely on an aggregate function (#6), but not vice versa.

    Yet once, SQL is not a procedural language, and the optimizer does not actually follow a rule of procedure like this.

  • What is the equivalent of | operator using the Q-quote mechanism?

    Version: 11.2.0.3

    I started a thread on similar requirement last week. I didn't want to resurrect. So, I start a new thread.

    We have a stored procedure called generate_table_stats that meet the stats for tables with a few additional options.

    Usually, this procedure is performed as below

    generate_table_stats exec ('EMP_DTL', 'BASIC');

    We want to generate the exec above instructions dynamically for all tables.

    In the traditional method of quotations, we use the concatenation (|) operator to separate the column names whose values are retrieved dynamically from the table queried.

    Similarly, how can I get a column of values printed when you use the Q-quote mechanism?

    In my column in table_name attempt below must be retrieved from user_tables. But table_name and pipes that are treated as literal string (which is not surprising).

    What is the equivalent of | (concatenation operator) when you use the Q-quote mechanism?

    -Expected results

    generate_table_stats exec ('EMP_DTL', 'BASIC');

    generate_table_stats exec ('CUSTOMER_DTL', 'BASIC');

    .

    .

    .

    -My attempt using Q-quote

    -Using # as the quote delimiter

    SQL > select q'#exec generate_table_stats ('| table_name |', 'BASE'); #' From user_tables;

    Q' #EXECGENERATE_TABLE_STATS('||) TABLE_NAME |', 'BASE')

    -----------------------------------------------------

    generate_table_stats exec ('| table_name |', 'BASE');

    generate_table_stats exec ('| table_name |', 'BASE');

    generate_table_stats exec ('| table_name |', 'BASE');

    generate_table_stats exec ('| table_name |', 'BASE');

    .

    .

    .

    .

    Hello

    The concatenation operator. works the same with any string expression.

    x | There

    Returns a string that is the same as sting followed immediately the string x y, x is

    • a literal string with Q before the first single quote
    • a literal string without Q
    • a VARCHAR2 column
    • a function that returns a string, or
    • any string expression.

    The string can be everything above, too.

    If you concatenate strings of 3 or more, like this

    str1. str2. ... || Suro

    then each of the STRS can be any kind of expression, independent of others.

    If you want to concatenate strings of 3, the 1st and the 3rd being Q-literals and the 2nd being a column, you can do it like this:

    Select q' generate_table_stats #exec (#' | table_name)

    || q ' #, ' BASIC'); #'

    From user_tables;

    Each of literals has its own Q and her own pair of start and end markers (all the ' # s in the example above).

    Since the first string literal has no any single-quotation marks incorporated, it is unnecessary to use Q-rating, and it could be misleading; a person who bed the code might think the actaully string contains ' #'s.  I prefer wriite the query in the form

    Select ' generate_table_stats exec (' | table_name)

    || q ' #, ' BASIC'); #'

    From user_tables;

  • What is the mode of staging by default when it is: (not specified)?

    Hi all

    What is staging mode by default if none is specified?

    According to the docs, there are three: stage, any stage , and external stage

    http://docs.Oracle.com/CD/E17904_01/apirefs.1111/e13952/TaskHelp/deployment/SetAServerStagingMode.html

    Thank you very much.

    Under Weblogic 10.3.5.0 OEL.

    The default value, set in the fashion scene is different depending on the scenario.
    For example, if you are deploying to a single server domain (just the AdminServer), default time mode is 'nostage '.
    If you deploy a server managed running in PRODUCTION mode, the default mode is 'stage' {in most cases, the default time mode is 'stage'}

    Arun

  • What is the mode of connection (ME918LL/A) current Airport Extreme support?

    I have a setup of the airport with two airports of previous generation connected in Bridge mode. (NOTE that this is not the same thing as a network via a wifi - connection Wi - Fi). I want to upgrade one of the units. I believe I read somewhere that the current model of (ME918LL/A) does not support bridge mode but can't find information about this in the specifications of the device.

    Bridge ME918LL/a mode?

    I believe I read somewhere that the current model of (ME918LL/A) does not support bridge mode but can't find information about this in the specifications of the device.

    Your feelings are what they are, but as any airport, Bridge Mode router is available as an option in router Mode for the 802.11ac current version of AirPort Extreme.

    Here is a screenshot of the ME911LL/A 802.11ac version of an Airport Extreme on the network here.

  • Want to play Total War on Windows using Bootcamp on Mac. What is the best Windows operating system?

    Original title: MACBOOK PRO 2011

    I have a macbook pro in 2011. It has a 2 ghz processor intel core i7. I have bootcamp and want to download a windows operating system to play total war games. My question is what windows operating system is best for this?

    Hello

    To find out which is the operating system that is recommended for the Total War Games, you may need to contact the administrator of the game. I suggest post you the question in Total War support forums.

    Reference:

    http://forums.totalwar.com/

    If the problem persists, you can contact the Sega support for assistance.

    http://help.Sega.com/home

    Hope this information helps. Response with status so that we can help you.

  • Could not load the Mode of operating unit using fndload.

    Hello experts,

    I'm migrating a competing using a TDL of an instance file to another program. As you know has R12 of this security feature where you can run the program with the operating unit single or multiple mode. I ran fndload for download the concurrent program to another instance and it ends without error, but it does not affect the operation of the single unit. It has the value null. If someone has encountered this?

    Here are the steps I did:
    I copied the XXF5_PO_PRINT.ldt file to $FND_TOP, patch, 115, import directory
    Run the following command:
    FNDLOAD apps / DOWNLOAD < < password > > O $FND_TOP/patch/115/import/afcpprog.lct XXF5_PO_PRINT.ldt PROGRAM APPLICATION_SHORT_NAME = XBOL CONCURRENT_PROGRAM_NAME = XXF5_PO_PRINT

    I ran fndload for download the concurrent program to another instance and it ends without error, but it does not affect the operation of the single unit. It has the value null. If someone has encountered this?

    This is set on the source instance? You can find it in the ldt file? If so, you can modify the ldt and try the same command again.

    In addition, please use CUSTOM_MODE = FORCE or UPLOAD_MODE = options to REPLACE and see if it helps.

    Advice on FNDLOAD [ID 735338.1]
    FNDLOAD Download / Upload of concurrent programs fails to load settings [ID 1101946.1]
    How to manually download the files "ldt" [1092694.1 ID]

    Thank you
    Hussein

  • What is the Mode of safe work and how can I turn it off?

    I am trying to display pictures on several websites and some of them are blocked with the message IMAGE NOT AFFICHABLE WORKSAFE MODE ON

    Based on a little research on the words 'IMAGE NO AFFICHABLE WORKSAFE MODE ON' I found that there is probably a toggle for this at the bottom of page alternate Mode safe work: Off | On that I found this on a model site where if it is switched on, the images in portfolios image models that were 18 + (eg nudity) were hidden.

  • What is the maintenance of operating system update?

    He saw in windows update, I wondered what it was
    Thanks :)

    Test updates to Windows 7 beta users

    Carey Frisch

  • What is the MicrosoftR WindowsR operating system?

    ASUS useless.  In broken English email, I had to simply delete programs on the C: drive files, if it does not appear in programs and features.  They wrote that they knew nothing about it.

    Finally found some info in the forums on the internet.  The engine that drives the touchpad on this laptop can use the stylus and touch for some of its parameters.  It is not on the touch screen, it is used by the tablet.

    The touch pad uses the Port of PS/2 ELAN Smart-Pad and Pen and Touch is enabled with it.  It's hard to use, very sensitive, so I use an external mouse instead.

    Anyway, the simple answer is this pen and touch is for the touchpad of the notebook and has nothing to do with the screen.


  • Bug of Linksys WRT54GC Mode of operation of "router"?

    I use a Linksys WRT54GC router and I experience a behavior that I don't expect.
    You give me your opinion?
    This is the case:

    My assumption of "Gateway" or "Router" operating Mode is:
    Gateway mode means NAT that makes invisible LAN subnet side WAN addresses. NAT is disabled by activating the Mode of operation of 'Gateway' to 'router '.

    I have connected a PC (192.168.2.100) to port the router WAN and another (192.168.23.100) PC on a LAN (192.168.23.1) of the router (192.168.2.2) port.
    When I switch my WRT54GC "Router" mode I can't always ping the PC on the site of the side router LAN WAN. SPI Firewall protection and block anonymous Internet requests are disabled. Firewalls on both computers is disabled.

    I saw a similar problem at the forum "Connecting two routers via WAN" 08/28/2008 Victor Tang.

    Don't you think that it is a bug in the mode of operation of the WRT54GC software?

    I reported the bug to Linksys.

    My first experience with Linksys technical support is very good.

    They take the serious problem, ask for the discharge of Wireshark and send me an update of the firmware of the router.

    This fixes the bug with the mode of operation, now I can without NAT on and outside, very well!

    I don't have firmware update earlier because the release notes did not mention my bug, I read in the forum a lot of users having problems after the update of the firmware, so I followed the policy do not update unless it can solve your problem.

    There are some things perhaps worth mentioning:

    You should be careful to use the right firmware for your router.

    Not only the model of the router is too important, the hardware version and too country!

    I've got a WRT54GC, hardware version 1, and it is the type of the EU.

    Of this material, there's also a different US with versions of firmware version!

    The latest version of the firmware to the US type is v1.60.1, the latest version of the EU type is 1.60.0 v.

    Thus, you should take care of this website, you download the update to get the right version and read the release notes. These release notes, you can check if your current firmware version is part of the history of this firmware, so you know that you have the right one. I was so very accurate because many have reported problems in the forum with updates.

    Now I'm able to Exchange traffic between computers and printers in different subnets and I can access the Internet from each subnet gateway I want.

    It is important to think about the configuration of your PC and routing tables.

    The firewall on the computers must be configured on the additional subnet.

    A PC has a default gateway to reach a device on another subnet.

    Most of the time these are devices on the Internet, so if you create additional internal subnets that your traffic will be by default will be send to the Internet and will be lost. To define additional gateways where your additional subnet can be found to avoid this.

    This can be done on a PC with the command: route add (IE 192.168.23.0 mask 255.255.255.0 192.168.2.2) or you define a static route to your router (the latter is preferable).

    The problems I've had, forced me to consider how does networking, with the help of the users on this forum, I would conclude that this is a bug, with the support of very good Linksys everything now works as expected.

    Thank you.

  • What is the newest operating system that will run on my Powerbook G4 17"

    My Powerbook G4 17 "is currently running OS 10.4.11. I want to update so I can buy a new printer, since any of it available seem to run on this OS. What is the operating system that you are higher that this computer will accept and what steps do I need to get from here to there? Thank you.

    Your computer can run the version latest is OS X 10.5 Leopard.

  • What is the HP Digital Imaging Monitor? Apply to my operating system, Windows 7?

    What is the HP Digital Imaging Monitor? Apply to my operating system, Windows 7? I want to remove the icon from the task bar (toolbar in the lower right corner of the screen) that I never use it.

    Picardjc wrote that "Digital imaging monitor is part of the HP software that communicates with your HP printer. This program allows to read the inklevels, get an out of paper message, scan from the device to the computer and so on. It is not necessary, but it will restrict the use of printers if you delete. "Understood. But for my printer HP Officejet Pro 8000 A809a, what is the purpose of having the digital imaging monitor icon in the taskbar Windows7 sp1 of the Notification area (aka system tray)? My A809a is NOT an all-in-one that includes a scanner; It is simply a very good printer. When I start to print something, if you need ink or paper, that information is displayed on the screen of my computer. So I ask again: why is the icon of monitor digital imaging on the taskbar? I clicked on at the time of this icon (I not print anything, but as usual, the printer is turned on), and nothing happened. R.N. (Roger) Folsom _ P.S. below I'll post some other discussions (with links to their locations) of the digital imaging monitor, I discovered before finding this site on which I am writing. There are a variety of opinions on what makes the digital imaging monitor. HP Digital Imaging Monitor is for HP director system tray access. This is necessary if you want to use the buttons of all-in-one on a HP printer all in one to scan documents or transfer photos from a camera manually. Closing the icon monitor HP digital imaging in the Windows system tray can cause the HP all-in-one to lose part of its scanning features and not the connection error message. In this case, you can restore all functionality by restarting the computer or by starting the HP digital imaging monitor. SOURCE: Yahoo http://answers.yahoo.com/question/index?qid=20080115093754AAlajpq - Re: REMOVE HP Digital Imaging Monitor of Systray? [Edited] 03/08/2011 14:05 - edited? 03/08/2011 14:08 Yes, it is safe to remove. In my view, it is usually in the program group under start / all programs / startup. Simply navigate under the Start button, right-click on it and delete! If it is not there, then remove it from the registry: run regedit and go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run and delete it from the list in the right pane. If she is not there, then try hkey_current_user\\software\\microsoft\\windows\\currentversion\\run it's better than using msconfig and uncheck it. In my opinion, msconfig must always be set to Normal startup. Your printer will always print without that annoying obstructive utility called Digital Imaging Monitor. Ciao! Casey Henderson, MCP SOURCE: http://h30434.www3.hp.com/t5/Web-Printing-Software/REMOVING-HP-Digital-Imaging-Monitor-from-Systray/td-p/253515

  • What is the easiest way to improve the operating speed?

    What is the easiest way to improve the operating speed?

    Buy a new Mac.

    C.

Maybe you are looking for