What is the nucleus of a file system for any operating system or file system - at the heart of any os?

Similar Questions

• What is the heart down link between 2 ASA?

  We have 2 firewall to connect through the link dedicated and accounting a/s, my uqestion, what is heartbeat link down, airport causing the ASA 2 all active? in this case, our switch will send traffic to 2 firewall?

  In normal operation if it breaks down, the situation you describe won't "our switch will send traffic to 2 firewall. However if they restart, both units becomes active. Take a look at this table:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml#actio

  Please rate if useful.

  Concerning

  Farrukh

• What size are all my image files?

  PES 9 on Win 7.

  Is there a way I can tell the total size of all images/videos in my PSE catalog?

  My catalog has access to all my files.

  I don't keep anything on a separate device.

  Thus, regardless of my Advanced catalog, this is what I want to summarize.

  Thanks for any help or advice!

  I would like to start a full backup of the Organizer. Before you start the actual backup, the Organizer calculates the space required for backup. You can stop the process when the calculation is done and displayed... or you can continue the backup, which is never a bad idea.

  Edit: the above calculation is valid even if your multimedia files on several disks.

• What is the best software for this matter of form?

  I have a project for which I think Adobe have a solution, but I want to assure you that I have buy the correct software. I searched the forum but quite impossible to find the right answer.

  I want to be able to create a form that can be completed electronically, has captured for analysis of the data entered and then be able to print a paper copy of the completed form.

  What I understand from what I have read so far, I can create a form with Acrobat and distribute it in PDF format. Once the form is completed on-screen and submitted, the data will be captured by forms Central where I can analyze it. The person who completed the form and then print it as I need a signed paper copy. The completed form by e-mail, in which case it is completed on an i - Pad and can be sent to a place that can print?

  Finally, I need about 750 of these completed forms. Forms Central allows only 500 participants by the form, I think, but, with the right subscription can I distribute 2 identical forms and then export and merge data in, said Excel?

  Or Livecycle will do all what I want.

  Thanks in advance for any advice.

  With the basic plan of FormsCentral, the maximum number of answers in the table of responses at one time is limited to 500, but you can earn more if you export the responses and remove some of the table. If you get the plan, this number increased to 5000. So the question is to know if you think that you will be able to export before the response table fills up. But there is also a buffer zone so that all submissions over 500 are always saved, they are simply not shown until you remove a part out of the way, so no data is lost.

  Users will be able to present, print, save and email if you wish. They use Adobe Reader on the iPad, which is not the default PDF Viewer and cannot be made the default display.

• What is the audit file system 8 exit code?

  Disk utility > first aid

  What is the audit file system 8 exit code?

  Thank you.

  Disk utility local SSD and the disagree recovery Partition

  IR.1819660 / http://forums.macrumors.com/threads/File-System-Check-Exit-code-8-Disk-wont-repa

• What is the purpose of the BOOTSECT. BACK file on a system dual boot?

  What is the purpose of the BOOTSECT. BACK file on a system dual boot?

  Hi Clyde,

  What is the operating system installed on your computer?

  Bootsect.DOS is the boot sector loaded by NTLDR charge BACK, or if there is no file not specified when an operating system is not NT-based loading. When your computer is configured to dual boot in Windows NT version 4.0 and another operating system, it uses a hidden file called Bootsect.dos to boot into the no Windows NT operating system. If the Bootsect.dos file is damaged or is missing from the root of the C drive, you receive this error. Bootsect.DOS is created by the installation of Windows NT. The boot sector in sector 0 of the C drive is copied in Bootsect.dos until the installation program writes the Windows NT boot sector. (Setup will not overwrite an existing Bootsect.dos.) If you choose a previous operating system, Windows NT runs Bootsect.dos, simulating the normal procedure to start the previous operating system. Because the information contained in Bootsect.dos is really created by the previous operating system, it is very difficult to re - create.

• What burning CDs in Windows Media music system prepares all the files listed.

  What burning CDs in Windows Media music system prepares all the files listed.  When the system starts writing the files on the disc it gets through about 4 songs and then goes to finalize the disc and ejects the disc.  The disk does not appear to have anything on it.  Can I do anything locally to solve the problem?

  My system is XP.

  I burned the disc a lot in the past

  There has been no major changes to the system

  The files I am to burn to the disc are previously ripped files on the disk hard, some of them were burned on another drive before.

  I tried to slow down the burn speed, but that did not work.

  CD burning problem

  Hello

  • You receive an error message when burning CDs?
  • What were the changes made before the issue started?
  To resolve this problem, do one or more of the following and then try again:

  a. Verify that the CD burner is properly connected.

  b. clean the disc and verify that it is not damaged.

  c. try a different brand of blank discs.

  d. If another program is currently burning files on the CD, wait until the burning process is completed.

  e. Quit other programs that may be using the CD burner.

  f. restart Windows Media Player.

  g. restart your computer.

  h. use the Windows error-checking tool to find system errors of files with bad sectors on your hard drive. For more information about the error-checking tool, see Windows Help and Support.

  You can check: http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=C00D10DA&contextid=30&originalid=C00D0019

• On a 32-bit vista business system, what is the right way to recover from a damaged NTLDR file that prevents the system from booting?

  On a 32-bit vista business system, what is the right way to recover from a damaged NTLDR file that prevents the system from booting?

  Also, is there a powerful device filled, utility like Winternals Windows PE boot, I can download for the resolution of problems like this and others?

  Thank you in advance!

  Have you had a glance at this startup repair disk?

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• What is FAT, FAT32 & NTFS maximum file size of file systems supported? File system of all the methods of the passage of FAT & FAT32 to NTFS without formatting is appreciated.

  What is FAT, FAT32 & NTFS maximum file size of file systems supported? File system of all the methods of the passage of FAT & FAT32 to NTFS without formatting is appreciated. (IE without deleting the files from a particular disk).

  Difference between material FAT & FAT32?

  I have a disk full of files, and it is in the FAT32 file system. As I can't copy large files (5 GB +) in this player, I intend to fix this by changing the file systems. Apparently, it is not possible to do it without formatting. I am curious about a way to do this without destroying the drive.

  Thanks in advance.

  Eguy

  Tuesday, October 9, 2012 16:55:51 + 0000, Eguy wrote:

  What is FAT, FAT32 & NTFS maximum file size of file systems supported? File system of all the methods of the passage of FAT & FAT32 to NTFS without formatting is appreciated. (IE without deleting the files from a particular disk).

  Difference between material FAT & FAT32?

  First, note that there are three varieties of FAT: FAT12, FAT16, and
  FAT32. Many people call just FAT16 FAT, because before that FAT32 is out.
  FAT16 is the only variety used for hard drives, so just
  The FAT was not enough.

  FAT12 (hardly any more used) had a maximum volume size of 12 MB.
  It has been used almost exclusively for floppy disks.

  FAT16 was used on hard disks (or partitions) up to 4 GB and had a
  cluster size which varied from 2 KB to 64 KB, depending on the size of
  the partition. It serves almost never again, because almost nobody does
  a as small as 4 GB partitions.

  FAT32 FAT16 succeeded and has a maximum drive size of 2 TB. His
  maximum file size is 4 GB, which explains why you can't copy a file of 5 GB to
  it. its cluster size is 4 KB up to an 8 GB partition. Beyond 8 GB the
  cluster size develops up to 32 KB.
  NTFS, that's what almost everyone should use on their hard drives
  today. Its maximum volume size is 2 ^ ^ 64-1 and its maximum file size
  16 × 1024 is ^ ^ 6 bytes (much more than the bigger hard drive available
  today). Cluster size is 4 KB, regardless of the size of the volume.

  I have a disk full of files, and it is in the FAT32 file system. As I can't copy large files (5 GB +) in this player, I intend to fix this by changing the file systems.

  Good! You should.

  Apparently, it is not possible to do it without formatting.

  It's not correct. To convert to NTFS, use you the CONVERT
  command. But first read http://www.aumha.org/a/ntfscvt.htm , because
  There is an important question about the size of cluster that is not obvious.

  Also note that conversion is an important step, touching everything on your
  drive. When you take a big step, no matter how unlikely it is
  always possible that something can go wrong. For this reason, there
  careful to make sure that you have a backup of everything you can not afford to
  lose before you start.

  Ken Blake, Microsoft MVP

• Windows 7: what are the individual "file system type" files in the system volume information folder?

  Original title: Windows 7: what are the individual "file system type" files in the folder system volume information accumulating [not the files system restore I already know and don't use yet]

  Hi-

  I stopped using the system restore, I found a better solution, for me, that's what I have to do.
  Then I noticed that several 'file system' 'type' was being created, 12 times yesterday, 3 up to today in the early hours of the morning and stored in they System Volume Information folder, anywhere from 30 MB to 2 GB.
  three of these file names 'file system' 'type' are:
  {debb21da-eafc-11e2-ba92-00241dc5d84e} {3808876b-c176-4e48-b7ae-04046e6cc752}
  {3debe675-eaa7-11e2-a462-00241dc5d84e} {3808876b-c176-4e48-b7ae-04046e6cc752}
  {3debe5e8-eaa7-11e2-a462-00241dc5d84e} {3808876b-c176-4e48-b7ae-04046e6cc752}
  Anyone know what it could be?
  Can I follow up to what program/process they are related?
  Are they safe to delete?
  Ideas?  Suggestions?
  Thank you.
  John

  Hi John,.

  Yes, you can delete the system volume information data if not to use the system restore.

  You will need to give permission to the folder until you delete it.

  How to open a file if I get an access denied message?

  Please post with the State of the question.

• Accidentally deleted a dynamic link library (DLL) file and the need to replace one possibly other system files - what is the best method?

  I did a system restore to a point before that my main user account has been established.  I had to set up a new user, and then it was suggested that to copy all the data of the user "existing" to the newly created user.  When I did this it's not well at all and some DLL files have been corrupted or deleted or not connecting correctly to the user of your choice.  I actually then did a restore of the system to the last restore point.  However, given that SR does not change the data, I was stuck with the wrong DLL and other system files.  I thought I had stupid test because I had backed up data.  I tried to restore to an earlier point (using Windows backup and restore).  Unfortunately the restore will not work and I get the following error: "a systematic failure of the initialization of the Dynamic Link Library (DLL).  I need to repair or replace the corrupt to get the system back and then protected files again.  I'd appreciate any help!

  Thank you

  In the case that he is a protected system file, you can check if you can always run the System File Checker

  http://support.Microsoft.com/kb/929833

  You can boot from a system repair disc to retrieve an image from the previous system that you have made.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

• I need to import a simple Excel file in InDesign, but it must be free of error, what are the system requirements of InDesign and Excel?

  I need to import a simple Excel file in InDesign, but it must be free of error, what are the system requirements of InDesign and Excel?

  but it must be free of errors

  Do you mean without errors in the text or formatting? When you place an Excel doc, the Place dialog box allows you to display Import Options. You can choose to place as a non formatted table and apply to any InDesign Table Style.

• I had a blue error screen, so I've debugged and discovered that this ntoskrnl.exe file was the cause. The version of the file is 5.1.2600.1106. Is it safe to remove it from my XP system, or what is the solution?

  Windows would not open.

  Hi canuckster,.

  1. have you made any hardware changes or software on the computer before this problem?

  2. What is the full error message or code you receive?

  If you receive one of the error messages listed in this link, you can follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Contacts file is empty after the last OS update.  I have a backup, but what is the name of file

  I have a backup, but what is the name of the contacts file so that I can restore the backup?  After that the last operating system updated, the contacts file is empty.

  If you use Time Machine for backup, you can open the app on your Mac and then click the Time Machine icon in the menu bar and then click on "Enter Time Machine".

• 15.0.1 Firefox what are the system requirements for Mac?

  I use Mac OS 10.6.8 and I can't install Firefox v 15.0.1. What are the system requirements for this new version of Firefox running on a Mac?

  Firefox should work fine on Mac OS X 10.6.8

  See:

  • http://www.Mozilla.org/en-us/Firefox/15.0.1/system-requirements/

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
  • Basket of the current application of Firefox (for example, open the Applications folder in Finder and drag the Firefox application to the trash) to do a clean install (re) -
  • Install the new version you downloaded
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox