What is the problem with my iphone? He says still no service but my sim card works with other phones, after a reboot it says searching until I have to remove and reinsert the sim ive done all what is the factory reset to open the phone to verify any damag
IPhone 6 64 gb
iOS 9.2.1
The phone says no service but the SIM card works, everything in the phone works except the flash still lights up and flickers sometimes before becoming stable but who don't mind not 'that' much, ive tried factory reset and everything, ive also open the unit and looked for signs of damage, the phone knows there is a SIM card in the phone , but he never says the name of the carrier, also after the restart he said looking and does not stop until I have remove and reinsert the SIM card.
You can restore the factory state after an iTunes backup
If this does not resolve the problem then you may want to align on Apple or an approved repair shop
Tags: iPhone
Similar Questions
-
I have just purchased IPhone 6 Plus. When I get a text Message I get no notification - no vibration and no noise. I put everything correctly. I know several others who have the same problems with this phone. Any suggestions?
I have the same problem. You own an iPhone 6 Plus 2/9. Problems began the next day. Phone took over and got another new. Problems with another brand new! Volume is also impoverished - even when up until the end. Extremely frustrated! Any advice would be appreciated.
-
I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?
You need to activate the phone. There is nothing that the phone can not be activated.
-
I get a box that says, please verify your billing information. We discovered a problem with your last payment for creative cloud. Go online to manage your account and check your billing account. 19 days remaining. What is c?
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.
These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.
Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu
> options > advanced > General
. -
Question
I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the mode 5 firefox safe and always without success. Help, pleaseTo help other users find solutions, please come back to this Thread and connect you to the
Forum with your user name and password:Click on 'resolved' beside the answer above that BETTER resolved your issue
DO NOT CLICK on 'Solved It' next to this answer
-
R7000, problems with wireless connection after the last firmware update 1.0.6
I recently updated to the latest firmware available for the R7000...
The upgrade went well and my Wired PC all connected without any problem, but several of my wireless devices were unable to connect to the WiFi. I have my cell phone Wifi (Android phone) kept gives me an error of authentication, but was able to connect to the network comments... weird...
I started firmware 1.0.4 and everything worked well again... it seems that the new firmware is buggy.
The Firmware versions listed above are only for the first three issues, to save typing, but you get the version that I use...
Nick
Hello
I would like to let you know, I've improved in 1.0.6 last night and everything worked. The difference is this time I had to reset my router to the factory settings using the reset hidden at the back button and hold the button for about 7-10 seconds. This resets the router to the factory settings. I then had to re-enter all my IP address reservations and the word block list, but all my wireless devices were able to connect. The last time I did the upgrade, I just restarted the router, and I had read that I had to do a factory reset to operate correctly.
It would have been nice for Netgear arrive at a way to extract Information form my version last-place back... it would have saved me a lot of time...
Good luck
-
I have a problem with my keyboard after the update using drivercanner
Original title: my keyboard stopped working after the last updae
OTEVA here
Hi I have a problem with my keyboard after update using drivercanner I need help fixing this cause I tried looking for the installation of the upate that cause, but I don't have where to look.
try a system restore to a date preceding the update.
-
Problem with Windows Update after the removal of Virus
My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off. Any suggestions?
[Original title: Windows Update]
It makes more sense. How to reset the Windows Update components?
Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.
EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.
Repair the Windows updates
http://www.tweaking.com/content/page/repair_windows_updates.html
Registry backup
http://www.tweaking.com/content/page/registry_backup.htmlI hope this helps.
-
I have to unplug and reinsert the helmet after all power on?
I have a Pavilion dv4-1430us. I like to plug in external speakers and leave it plugged, but whenever I power down the laptop and it works again, the sound returns to the internal speakers. I have to unplug and reinsert external speaker cables in the headphone Sockets.
Is there a way to avoid having to do this?
Ok.. in this case... voila... ftp://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45211.exe
-
Remove and reinsert the battery to reboot the computer from sleep mode
When the computer goes into mode "sleep" due to inactivity, it cannot be started again until I completely remove and reinsert the battery. It is an Acer laptop with Windows 7 OS
Hello
References to Vista also apply to Windows 7.
1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------
Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
similar are not enabled.Shoot sleep problems - hibernation
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
type of hibernation - see turn Hibernate on / offAll the default power plans and then set them as you wish.
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I have a problem with my samsung R60plus. Whenever I am in stop, he fails to close and sometimes it restarts when it didn't close. A blue screen appers and this are some of the info it shows. Problem signature: problem event name: BlueScreen the system Version: 6.0.6002.2.2.0.768.3 locale ID: 2057 of additional information about the problem: BCCode: 9f BCP1: 00000003 BCP2: 852F46B0 BCP3: 862089E0 BCP4: 85531008 OS Version: 6_0_6002 Service Pack: 2_0 product: 768_1 files that help describe the problem: C:\Windows\Minidump\Mini111211-02.dmp C:\Users\EMMANUEL C\AppData\Local\Temp\WER-36555854-0.sysdata.xml C:\Users\EMMANUEL C\AppData\Local\Temp\WERBC76.tmp.version. How can I fix this annoying problem
Hello
· You did changes to the computer very recently before that this problem occurred?
Try the steps in the following methods and check the status of the issue.
Method 1:
Blue screen errors can be caused by either a software or hardware problem. This article contains steps that you can take to try to resolve the problems of software only. If you can't solve the problem by following these steps, you may experience a hardware problem. In this case, you must contact your computer manufacturer or a computer hardware technician for help with hardware issues.
How to fix bluescreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233
Method 2:
Follow the form of measures troubleshooting article and check if that helps.
"Stop 0x9F" error or "Stop 0xFE" on a Windows Vista-based or Windows 7 computer that uses certain USB AMD EHCI host controllers.
-
I used Paperport 9SE for several years without any problems with XP. Now, because of a forced computer upgrade, I have Windows & OS. Now I find that I can't "save under" or "Send scanned documents to ' MSWord' as suggestions?
Hello
Is Microsoft Office (Word) installed on the new Windows 7 operating system?
If this isn't the case, install Microsoft Office must fix.
If Microsoft Office is installed, try Microsoft Office. Follow these steps.
a. click Start.
b. click on Control Panel, programs and features.
c. find Microsoft Office.
d. right-click on Microsoft Office and select Repair.
Now, check the question.
-
did someone had problems with lightroom 5 after installing Mac OS El Capitan?
did someone had problems with lightroom 5 after installing Mac OS El Capitan? the images are well n the library but darken when I switch to develop fashion
It's a shame that you did not check for problems before you can update your Mac
First, see if the update to the fixed bug Mac 10.11.1 will help you
-an exchange of views of 10.11.1 https://forums.adobe.com/thread/1986008
-In ADDITION the need to update the drivers nVidia (links included in the message)
-There is also 'a' mention of an another 10.11.2 bug fix tested by Apple
He has problems with Mac 10.11 El Capitan... which is perhaps one of them
See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links
-the first link that the answer is a possible solution to install problems
-There is also a link on the video display problems in Premiere Pro
- and many other programs... MORE Microsoft Office also has problems
More official Adobe help pages listing problems Mac 10.11
https://helpx.Adobe.com/Photoshop/KB/Photoshop-and-El-Capitan-Mac-OS-10-11.html
http://blogs.Adobe.com/PremierePro/2015/10/Premiere-Pro-CC-and-Mac-OS-x-10-11-El-Capitan.h tml
https://helpx.Adobe.com/Lightroom/KB/Lightroom-and-El-Capitan---Mac-OS-10-11.html
http://blogs.Adobe.com/audition/2015/10/audition-CC-and-OSX-10-11-El-Capitan.html#.VjjYBtG raUk
-
having a weird problem with my assignment after incorporation of java
Hello
I have a weird problem with my assign activity, I use a Java Embedding wherin I access a variable and assign it some data, further in the next step when I try to assign data to the same variable affecting the activity I get an error message as below.
com.oracle.bpel.client.BPELFault: faultName: parts of {{http://schemas.xmlsoap.org/ws/2003/03/business-process/} selectionFailure}: {{summary = not valid for the type of part.}} When you perform the operation of the entitlement, the node THIS, IS, TEST is invalid. The node named in the error message was either null, or a node-set is empty, and it was not an instance of org.w3c.Element. Check the value of the node to the line number 795 is not null and is an instance of org.w3c.Element. } .
I am using soa 11.1.1.5
Can someone please help?
-Thank you
ShirishShirish,
This is a bug and you will need to apply a patch for it.
You can find explanations in Oracle Support Id ID 1194228.1.Arik
Maybe you are looking for
-
Hide pictures in Photos of the Sierra
After update to Sierra way too many of my pictures were to be identified by a new name. I was wondering if there is a quick and easy way to hide several pictures without going through the function 'Add' in people?
-
Will be never another Sony NEX NEX C3 camera will be able to use PlayMemories apps?
-
I trained with the events of the user to leave the course textbook, an example of Core 3. I did not use the blinking.vi like NOR use, instead I assigned a value Boolean true to the flashing for the event property node shot LED I want to blink only on
-
I recently had a print spooler problem and used a HP Assistant that I downloaded. Which seems to solve the problem when Lotus began to print again. When I tried to print from Excel and my account error Email said printer active unavailable, but he
-
LaserJet p1606dn ceased to print
This afternoon, my printer ran out of paper. I have loaded the paper, but now I can't print. I erased the QC. I ran to the resolution of the problems - it didn't report any problems. I rebooted the computer and the printer. If I try to print wit