What is the range of temperature for the 9219 and 9211 measurement modules using a K type thermocouple as the sensor?

Similar Questions

• When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes in the upper right corner.

  When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes at the top right corner with the-, square and X are too far to the right to do anything. How can I fit on my screen, so I can use my computer?

  Hello

  Please contact Microsoft Community.

  This problem is limited to any icon or it happens with all?

  Did you change to the computer?

  I suggest to refer to the following methods and check to see if it helps:

  Method 1:

  Install the latest display driver and check

  Uninstall the driver from Device Manager display.

  a. close all programs. This will ensure that the programs do not interfere with the update of the driver.
  b. right-click on my computer, and then click Properties. This will bring you from the System Properties menu.

  c. click Device Manager
  d. expand the display column of cards by clicking on them. This will show the graphical current map that is using your computer.
  e. right click on the adapter, then select Properties.
  f. click on the driver tab. This tab displays information about the current driver, as well as options to update, delete, uninstall, and back the driver.
  g. click on uninstall
  h. restart the computer

  You can install the latest display driver for download on the site of computer manufacturing, same driver will reinstall automatically after the restart, if the computer is connected to the Internet.

  Method 2:

  I suggest you try the system restore. Restore the system to a restore point when your computer was working fine

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also check the Device Manager to see if the video card has a yellow exclamation on it with an error any:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/device-management

  I hope this helps.

  Kind regards
  Anusha

• What sellers make in 32bpc plugins for AE CS5 and body?

  Hello

  reading a lot about the effects of 32bpc and how much "headroom" they provide

  However, if you use other effects less than 32bpc than all

  "make the pipeline" gets returned to the lowest effect of PCBs in the line...

  so

  My answer to this would be to only use 32bpc effects

  so I'm putting together a list of effects 32bpc for cs5 AE and organization

  I know that Cycore FX HD 32bpc

  Someone at - it a list of 3rd party effect companies that offer 32bpc effects?

  Thank you

  j

  The After Effects forum is not the best place for questions about the first Pro SDK and internals of Premiere Pro plug-ins. Here is a link to the forum first Pro SDK:

  http://forums.Adobe.com/community/premiere/premierepro_current/SDK

  If you want to make a feature request for Premiere Pro to have a 32 bpc, dynamic range color pipeline such as After Effects, you can submit a feature request. Remember to specify in your feature request why you think that a NLE needs a full 32-bpc, pipeline of high dynamic range color. Usually, this is only important and useful for the application of Visual effects and compositing, and not as much for an NLE.

• What a SQL Server would cost for a medium and large company?

  I am researching the cost of SQL for a medium and large business, allowing access to their users. I have priced at the State for everything but I can't find anything online. Someone would help me please on my business. I don't know too much about this topic and I'm looking to improve my results for the class that I am. Any help would be appreciated.

  original title: search SQL

  Hi Sam O'Day,.

   

   

  I wish you post your question in the TechNet Forums because it caters to an audience of it professionals.

   

  Check out the link-

  TechNet forums

   

   

  Hope this helps!

   

• To view the zero in a pivot for two dimensions and a measure view

  How show zero instead of null for the measure, the measure is seen in two-dimensional row and one in a column.
  Thanks in advance

  Hi santhoshbon,

  Are you sure that you get a record with a NULL value or are you just can't get a record at all? There is a great misunderstanding about the lack of data compared to data with a NULL value.

  If you really a NULL value which crosses, then all you have to do is use the IFNULL(MY_MEASURE,0) and you will represent at least a 0 instead of NULL.

  If you have no trace in your fact table for this combination of your dimensions, while you do kind of thing of data densification. Here are a few options:

  (1) query use Nico logical substitute to the densification of the data: http://gerardnico.com/wiki/dat/obiee/logical_sql/obiee_sql_densification
  (2) outerjoin bypass to implement John Minkjan in the report: Outer Join work-around
  (3) implement a real outer join to the RPD: joins OBIEE
  (4) to add missing dimensional data points, use the combine with a similar request.

  My guess is that you do not get a NULL value. I'm guessing that you have data scattered and you will need to use one of the methods above to work around this problem.

  Good luck and if you found this post useful, please reward points!

  Best regards

  -Joe

• Always get tries to connect to the server to try low support creative cloud because it my photoshop is gone and I need ASAP I paid for this month and I can't use it for my photogrpahy

  I googled and tried all of the suggestions

  Download error, installation or update of Cloud Creative applications

• Would be - what this laptop be all good for first CS6 and AE?

  http://www.eBay.co.UK/ITM/Dell-Inspiron-17R-7720-laptop-3-4GHz-I7-1TB-8gb-2GB-650m-win-8-F 290893870076 FULL-HD-B-NEW-/? PT = UK_Computing_Laptops_EH & hash = item43baa033fc

  Or it will be very slow?

  Of course, I am aware that a laptop can not hope to equal out of office. But since I am not satisfied by the quality-price ratio of Nvidia cards high of current range, I decided to wait until the release of Maxwell before assembling a new desktop platform.

  In the meantime, I am planning to get a laptop cheap (for editing in his bed ). This one seems to offer decent record and good value at £700 / $1075. I would put a 7200 RPM Seagate Barracuda in there.

  All opinions, please?

  No. It's terribly slow IMO, being only a dual-core CPU, although with HT, but still low power for HD editing. SD card, it is acceptable, if you get an SSD as a boot disk and a second drive internal 7200 RPM. The standard drive 5400 RPM is good enough to make a backup of...? It is at least 15 times slower than a fast desktop computer. Is it painful? Depends on the pain tolerance...

  Well, you know what you pay for...

• What is the best for my professional job or the retina

  Hello

  I need tips for buying a laptop Macbook...

  My job is to develop software for linux and windows systems, the software I develop usually require a connection to external devices via ethernet and RS 232 ports series, apart from that for windows, I have several special software which I use for programming of robots for use in industries and also the software IDEs for systems shipped as Cypress etc of Microchip.

  Linux I mainly use to develop applications for computers beaglebone and Raspberry.

  Using a Mac system means that I can develop also on Xcode for systems Mac OS x, something I wanted to do for a long time.

  I intend to run these operating systems (Windows and Linux) as the guest systems using VirtualBox, with Mac OSx as host.

  Since I also travel a lot maintenance machinery installed (requires Windows) I would prefer a laptop instead of a desktop computer, so I decided on the following configuration.

  MacBook Pro laptop

  -2.9 Ghz Dual Core i7 Turbo boost upt 3.6 Ghz

  -8 GB 1600 Mhz, DDR3 RAM

  -Hard disk 1 TB Serial ATA 5400 RPM

  I don't have many accessories as I already have a brand new Kensington trackball mouse, if necessary I can use an external monitor of HDMI (26 inches) to my office.

  My questions are these.

  1 - is the support of configuration above virtualization?, I want to VirtualBox to do this, is it possible with the above specifications?

  2 Ethernet RJ45 connectivity is very important for me because I need it to connect to various industrial automats, not to mention I have Ethernet I / simulation software P in need of this port. I see that my Setup doesn't have an ethernet port, so how do I connect via ethernet? Is there an available Ethernet adapter? What possible limitations are there compared to an integrated?

  [3. can be Ethernet port be customized through the Mac OSx, customize I mean change the IP, DHCP/Static, the gateway IP address], netmask etc.. These settings can be changed?

  4. I would like to increase my RAM 16 GB (or more) I currently have 16 GB, in my view, it is essential for the execution of virtual systems.

  5. the HDMI can support a share whole 26 inch HD monitor?

  6 is better than Pro retina?, I will not be upgrading my laptop, once I have the RAM and the required hard disk.

  7. because this is my work computer, what is the approximate years Apple will support this laptop? Will take in charge the laptop be declined in the following years? I have an Ipad Gen 1, which is totally UN-useableas, it can not be upgraded. My laptop will end up like this in 5 years?

  Rest of the card OK for me, 1 TB look better virtual systems consume a lot of disk space, speed may not be a review I would leave the laptop running or in hibernation, I believe that extends the life expectancy of the hard drive. Battery life isn't a review I would leave my laptop plugged in all time.

  Please let know us what you think...

  Thank you

  one

  1. Yes. But use Parallels instead of Virtual Box. The first is faster.
  2. There are two types of Ethernet cards. We use a USB 3.0 port and Thunderbolt, is used.
  3. Configurations can be configured manually. In most cases, it should be automatic.
  4. You can increase the RAM on the model 13 "as a custom configuration. The model 15 "comes with 16. GBs RAM is not extensible to the user.
  5. The HDMI port should be compatible with most of the ports to monitor.
  6. There is no model non-retine.
  7. Standard warranty is 1 year from the date of purchase. At any time within the first year, you can buy the extended warranty which adds another 2 years after the expiration of the standard warranty. All support including consultancies has a time delay. See registration Vintage and obsolete.

• What is the problem with 'AttributeMap' in a name of trigger?

  I think I found a bug in SQL Developer, but being new to this I thought I would ask here everything first see if anyone else knows why the error occurs.
  
  I use SQL Developer to write and test my table, the sequence and trigger scripts to create an application that creates the company I work for, but I ran into a problem where one of our names to trigger system, "TRG_ATTRIBUTEMAP_ID_INSERT" is originally a series of terrible mistakes that forces me to restart SQL Developer whenever I run the script. the table and the order are created very well however. If I change the 'P' to a 't.' in the name like "TRG_ATTRIBUTEMAT_ID_INSERT" Yes, the script works fine.
  
  Also, if I take the unaltered Create statements outside the lines Execute Immediate and run through SQL Plus, the trigger is created very well.
  
  Here is the error report I get:
  
  Error report:
  ORA-00603: ORACLE Server Session concluded with fatal error
  [ORA-00600: internal error code, arguments: [kqlidchg0], [], [], [], [], [], [], [], [], [], []]
  ORA-00604: an error has occurred at the SQL level recursive 2
  ORA-00001: unique constraint (SYS. Violated I_PLSCOPE_SIG_IDENTIFIER$)
  ORA-00942: table or view does not exist
  00603 00000 - "ORACLE Server session ended with a fatal error.
  * Cause: An ORACLE Server session is in an unrecoverable state.
  * Action: Connect to ORACLE again if a new server session will be created
  
  
  Here is the script I'm writing:
  
  DECLARE TABLE_MISSING EXCEPTION;
  PRAGMA EXCEPTION_INIT (TABLE_MISSING,-942);
  BEGIN
  BEGIN
  RUN IMMEDIATELY 'TRUNCATE TABLE AttributeMap;
  EXCEPTION
  WHEN TABLE_MISSING THEN
  BEGIN
  IMMEDIATE EXECUTION
  'CREATE THE AttributeMap TABLE '.
  (
  ID NUMERIC (38) NOT NULL
  -column removed to identify the error.
  CONSTRAINT PK_AttributeMap PRIMARY KEY (Id)
  )';
  BEGIN
  FOR (IN) cc
  SELECT sequence_name got sequence_exists
  Of all_sequences
  WHERE sequence_owner = USER
  AND sequence_name = "SEQ_ATTRIBUTEMAP_ID")
  LOOP
  -sequence exists, drop it (at least there will be one sequence)
  RUN IMMEDIATELY 'DROP SEQUENCE SEQ_ATTRIBUTEMAP_ID;
  END LOOP;
  -create sequence
  IMMEDIATE EXECUTION
  'CREATE THE SEQUENCE SEQ_ATTRIBUTEMAP_ID.
  MINVALUE 1
  MAXVALUE 999999999999999999
  START WITH 1
  INCREMENT BY 1
  NOCACHE';
  END;
  IMMEDIATE EXECUTION
  ' CREATE OR REPLACE TRIGGER TRG_ATTRIBUTEMAP_ID_INSERT
  INSERT BEFORE on AttributeMap
  FOR EACH LINE
  BEGIN
  IF: new. ID IS NULL THEN
  SELECT SEQ_ATTRIBUTEMAP_ID.nextval IN: new. DOUBLE ID;
  END IF;
  END;';
  END;
  END;
  END;
  
  
  I'm relatively new to Oracle, so I expect many of you wonder, ' why are you doing it like that? If you know a better way, I'm all ears, but I still want to know why a name of trigger with AttributeMap in it causes such problems.
  
  UPDATE: I tried to change the other letters in the name of the trigger and found if I change one of them it seems to work correctly. So is reserved TRG_ATTRIBUTEMAP_ID_INSERT or something?
  
  Published by: Paul Laska on August 1, 2012 14:10

  Hi Paul,.

  Here is some information about the PL/scope function which became available in Oracle DB 11.1:

  Oracle® Database Advanced Application Developer's Guide
  11g Release 1 (11.1)
  
  PL/Scope is a compiler-driven tool that collects data about identifiers in PL/SQL source code at program-unit compilation time and makes it available in static data dictionary views. The collected data includes information about identifier types, usages (declaration, definition, reference, call, assignment) and the location of each usage in the source code.
  
  PL/Scope enables the development of powerful and effective PL/Scope source code browsers that increase PL/SQL developer productivity by minimizing time spent browsing and understanding source code.
  
  PL/Scope is intended for application developers, and will usually be used in the environment of a development database.
  

  Of course the desired SQL Developer Team enjoy it in our Editor Code PL/SQL and DB Search, even in the version 1.1.x releases, by default the SQL Developer both the PLSCOPE_SETTINGS of IDENTIFIERS: ALL.

  Unfortunately, PL/scope had a bug which, long story short, effect triggers. This question, followed in bug 10094416, has been backported fixed and even to patch the many versions of database 11.2.0.x on various hardware platforms. If your solutions are:
  1 solve the problem by applying a patch for your version of the database.
  2. the solution of the problem using IDENTIFIERS: NONE for the sacrifice of some code editor in Chief/Research (not exactly how).

  -Gary

• HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

  According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

  What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

  Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

  Also if this from the Manual:

  Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

  So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

• What is the maximum CPU/GPU temperature safe for a 7212nr?

  When game Unreal Tournament 3 or Battlefield Bad Company 2 CPU reaches 90 ~ 92 degrees centigrade and GPU 80.

  What is considered 'safe' or 'normal' temperature for this laptop?

  I mean "without danger" for:

  -Avoid a shutdown.

  -Avoid damage BGA.

  -Other bad things.

  Thank you.

  These temperatures are hot enough, especially the CPU, once it starts to get close to 100 ° C, the processor will be throttle, slow down to avoid heat damage. If it cannot speed up, the computer will shut down to avoid frying the chip.

  If it is not under warranty, you may apply the thermal paste yourself and Yes. From my experience, the factory thermal paste is not enough. In fact, they use the dough, they used tampons. If you feel dangerous to do it yourself, take it to someone.

  If this isn't the case, buy you some arctic silver 5 and apply it. I say, if it starts to get into the middle of the 1980s, it's not too hot.

• What is the resolution for USB-6210 for positive ranges of entry?

  Hello

  I use USB-6210 to sample different types of sensors and each has its own range of values. I have two questions:

  (a) what are the fixed beaches of USB-6210 where most suitable is chosen automatically depending on the settings of user intput scope? They are to +/-0.2, +/-1, +/-5 and + /-10?

  (b) I know that if I select + / 10 as the range and then I will get the resoultion of 20 /(2^16), but what happens if I want to the positive range only? So if my sensor gives values between [0.10] and data acquisition would choose the + / 10 range. Then could get a resolution higher than 20 /(2^16) and how?

  Thank you.

  (a) Yes, they are the ranges listed in the manual

  (b) No, a fixed range means a fixed range. You cannot change them.

• Reading of temperature for the use of Thinkpad T510

  Hi all

  I have a question about the standard temperature / acceptable range for computers thinkpad t510 operation. My setup is currently my t510 is connected to an external monitor, speakers, keyboard and mouse. Therefore basically a desktop computer except using the innerds of the laptop as the "heart" of the system. My power manager put the CPU to adapt. The temperature readings that I get for the processor and the motherboard download the program called of Piriform Speccy are on average 60 to 61 degrees C. I wonder if it is within the normal temperature of operation for the laptop and if it is acceptable. What is the temperature not okay and why it is so high, it's that I use external references. Also, I even use heavy workload for the laptop and more for the web, browsing and listening to music and work on documents / spread sheet so basically, office work.

  And finally, the problem of temperature would resolve if I would in the future to get a computer laptop w530 since these laptops are more "powerful"? Or is that evil and the temperature is normal.

  Thanks in advance for answers

  unit88888888 wrote:

  The temperature readings that I get for the processor and the motherboard download the program called of Piriform Speccy are on average 60 to 61 degrees C. I wonder if it is within the normal temperature of operation for the laptop and if it is acceptable.

  Yes ~ 60 ° C is quite normal. I would get concerned if temperature readings consistently exceeded 80 c or if the fan was constantly. Otherwise you will see the temperature fluctuates as activity processor and graphics vary.

• What is the best alternative for the Pages ' 09?

  When I say 'better', what I want for me personally, is a suite of office or productivity app processor matches the characteristics and versatility of Pages ' 09; its other applications still compare well with other iWork applications; He has a history of integration with OS X; and it is well documented with good support. Also, for me personally, is less of a concern because Microsoft Office is available at a reduced cost as I am part of a society not-for-profit. I don't want to limit the question to these characteristics, however, because I am hoping to start a discussion that could be useful to a wider range of people than just me, and I hope that the wider, a question as possible would be more likely to attract the attention of Apple developers to say that if I'm out of patience There are probably others who do the same. Why can't they just continue to support Pages ' 09 up to 5 Pages is substantially more flexible and rich, more closely resembling the Pages ' 09? I downloaded and deleted 5 Pages twice the frustration. I use an older iMac OS x 10.11.4.

  Moreover, the "suites", whose names I know at least are Microsoft Office, OpenOffice Apache and LibreOffice.

  I had started a similar thread and somehow managed to check the wrong box and marked "resolved". I'm trying again in a slightly different wording.

  Apple's CEO and designer of programs/product/teams participate or read these messages because they are busy people. Instead, we are non-Apple employees who volunteer their time to help others solve problems. You can contact the team via the application menu Pages ' 09: provide feedback Pages.

  Your 'best' office suite would be Microsoft Office for Mac 2016 as a replacement for iWork ' 09 apps and their current impostors of Apple. You need to export your Pages documents in Word .doc, because no application in the world can open (faithfully) Pages ' 09 documents but Pages ' 09.

  With office for Mac 2016, you will work in the native Microsoft document architectures such as with the Windows Office 2013 and 2016. No translation on the import or export of worry. Just pure document exchange. You can even open a PDF file for editing in Word for Mac 2016.

  LibreOffice, although free, has a steep learning curve, is a Clone of MS Office and does not work in native Microsoft documents formats, although it can open and save in their. The format of the default document for LibreOffice is the Open Document Format, an international standard.

• Qosmio F50-108 - is the temperatur for 9700M GTS ok?

  Hello!
  I have a guestion temperatures on this GPU. My computer turns off twice while he was playing so I decided to take a look at the CPU and GPU temperatures. SpeedFan show that the CPU at rest is 54 and 56 for the Core 1 and 2 and 98 degrees for the GPU. What is the normal temperature of dor this map or should I worry?

  Thanks for the replies.

  Can you post what laptop Qosmio you have?

  In addition, I would try to clean the laptop with a jet of compressed air. You can buy this with a computer dealer and this could blow the dust from the cooling fans.

  I think that the temperature is too high because the laptop stops himself.
  Do you use the dirver Toshiba or nVidia?