What is the STIG RSS script and how implement us it with ESX hosts?

Similar Questions

• An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?

  An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?

  This issue has been resolved with the article below

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2015181

• What is the use of FPGAS and how it differs from the IO Modules

  Hi all

  Maybe it's a silly question for most of you.  But I have very less knowledge about the basic concepts of electronic (FPGA, real-time) to cRIOs. I know that FPGA

  can be used to generate circuits within the chip that helps by some logical functions.

  I've just started working in the cRIO.  My question is that we have Modules e/s making it outputs all the application entry.  So, what is the purpose of e/s in the FPGA.

  Lets consider that we entered for an application of RTD.  In this case the module NI 9217 itself exits 24 bits of data from the RTD measurement which may be the process of the LabVIEW VI.  What will be this FPGA between the i/o Modules and the processor will help in?  Also I want to know what type of communication is used to send data between the FPGA and host modules.

  Thanks in advance

  Ajay HI:

  Sorry, you do not have an answer to your original question. However, you are right about the benefits of the FPGA. You said, if you build pre-processing in the FPGA, you can unload a lot of potentially CPU calculations out of the host processor. In addition, the program running on the FPGA is highly deterministic and can run the code very quickly. So if you build a kind of guard or evanescent dog part of your application, the FPGA is a good place to put it.

  To answer your other questions, communication between the modules and the FPGA is generally above the SPI and the data can be transferred between the FPGA and host via DMA FIFO operating on the PCI bus or single point save access using read/write in the FPGA host Interface controls. You can also use interruptions in signal of disputes between the FPGA host.

  I hope this helps, but let us know if you have any other questions.

• I was wondering about an app that I had on a previous PC located in the 'Tools' menu, I'm going to submit inquiries about Firefox, my question is: what is the name of it and how do I add to the Firefox I have on my new PC?

  I had this about 2 weeks ago, but don't remember how I got it, it came with the download of 7.0 I think.

  The name of it is test pilot.

  For more information and download

  https://TestPilot.mozillalabs.com/

• What is the default identity store - and how can I put it?

  Hello
  
  I am running Webcenter on WLS and WLS and JPS assistance for authentication of users. On the WLS Console, if I go to areas of security-> myrealm-> providers, I have a list of four different suppliers.
  
  If I understand correctly, these four vendors are my identity stores. How can I set one as the store identities "by default"? Or see who is currently the default?
  
  The reason why I ask, is that I have the following code in Webcenter to create a new user in Active Directory:
  

        // Get the default identity store
        IdentityStore idStore = WCSecurityUtility.getDefaultIdentityStore();
  
        // Get the user manager object
        UserManager usermgr = idStore.getUserManager();
  
        usermgr.createUser(loginName, password.toCharArray(), propertySet);

  So I have a Java utility class that gives me the 'default identity store". Now, I want to change the configuration of WLS so that the Active Directory in which I want to create new users is the storage of identity 'by default'.
  
  Thanks in advance for any help,
  
  Ludovic

  I'm sure they mean the first in the list, you can reorder them by using the command button and moving them up and down.

• I was able to change the colors of fonts in an email, but now I can't. What is the reason for this and how can I solve the problem, please?

  I've updated for Mozilla Thunderbird v 24.4.0 and now the colors of fonts do not work.

  This bug was supposed to be fixed at 24.4, I why I am telling you your test so.
  See https://support.mozilla.org/en-US/questions/992366?

  could you please check again that you use 24.4.

  Also restart form Thunderbird Help menu (Alt + H) with Add-ons disabled, just to make sure that he is not an unhappy interaction with Add-ons or themes.

• What is the power on password and how to get the password

  Laptop HP 2000

  Hello

  Try to enter: 40791836

  Kind regards

  DP - K

• What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

  I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

  AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

  Mesh

  • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.
  
  
  • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient
  
  
  • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.
  
  
  • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

  Ports

  • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
  
  
  • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

  Problem solvers

  • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
  
  
  • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.
  
  
  • Several AXIEM processes are multithreaded as EMSight.

  Speaker

  • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

  I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

• Help me I have Windows XP. Would be, or could you please tell me what the function keys are and how I could use them?

  I have Windows XP. Would be, or could you please tell me what the function keys are and how I could use them?

  I have Windows XP. Would be, or could you please tell me what the function keys are and how I could use them?

  Function keys are used to things dirrent, depending on whether you are simply Windows or a program of work, and if you work in a program, what program it is?

  This search through the documentation of programs you use. Read also here: http://www.internetfixes.com/definitions/IF01424.htm

• What is a proxy server? Do I need to install the application proxy? And how to set up a proxy server to act as a gateway to the internet

  What is a proxy server? Do I need to install the application proxy? And how to set up a proxy server to act as a gateway to the internet and also a firewall to protect the network, finally to restrict internet access by employees to force employees to follow company policies?

  Hello

  Explanation of the Proxy Server

  http://en.Wikipedia.org/wiki/Proxy_server

  How to configure Internet Explorer to use a Proxy Server

  http://support.Microsoft.com/kb/135982/en-us

  How to set up a Proxy Server

  http://www.ehow.com/how_4488403_set-up-proxy-server.html

• What is the difference between extensions and Plugins and Add-ons?

  I'm sorry if here is not the right place for this post.

  What is the difference between extensions and Plugins and Add-ons? Apparantely, they differ in some sense or aspect, but I do not know how. Please, if it is not too complicated, explain in detail and simple language. Thanks in advance to 1 million.

  Kind regards
  Danesh

  Hi Danesh,

  You should take a look at this article for an explanation. Plugins and extensions are essentially types of Add-ons as well as of the characters and themes.

  Hope this helps!

• What does error Code 0x80072efd HRESULT and how to fix it?

  What does error Code 0x80072efd HRESULT and how to fix it?

  If this error occurs during the update of Windows, see here: http://support.microsoft.com/kb/836941. (0X80072EFD - ERROR_INTERNET_CANNOT_CONNECT). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• What is "a lot of widgets", and how do I remove it from my computer?

  Original title: "alotwidgets".

  What is "a lot of widgets", and how do I remove it from my computer?  I tried to download the latest version of Adobe Flash Player and he told me that I had to close this program... It is not listed in Add/Remove, but if I search in windows Explorer, it says it's in my program files...  There is no program running that I know...

  Please help that it left me speechless!

  Thanks in advance for any help.

  Hello

  Follow these steps and check if that helps:

  Step 1:

  I suggest that refer you to this article to remove the program add or remove programs and check if it helps.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Step 2:

  If you are not able to remove the program from Add or remove programs follow the steps in the article and check if that helps.

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

  Step 3:

  There is a 'Rapid Product Removal Tool' from Microsoft which can be used to remove the programs that we are not able to remove it by using the functionality of the program.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• Windows live family safety... What is it where it comes and how do I get rid of him?

  Windows live family safety... .What is where it comes from and how do I get rid of him?

  This thing has invaded my machine, prevented me to access my most used and very general web sites and it's driving crazy me.

  Won't someone please help me get this and all related _ out of my machine?

  I went to this site and received no directive. https://account.live.com/HelpCentral.aspx?mkt=en-us&ProductKey=wlfamilysafety

  When I go into the folder on WL that appeared magically in my repertoire that I find all kinds of Nice to do things. How that happened? Why I'm so clueless, out in space, lost in the dark? I really did it? Going to cost me more than my sanity? Most of all, how can I get rid of him and everything that is associated with?

  Hello swhite1

  When you download any program Windows liver, you get all unless you say otherwise.
  To get rid of Windows Live family safety, you will need to uninstall the program.

  This is for Vista.

  Start menu > Control Panel > programs > programs and features >
  
  Uninstall or change a program
  Letter: Windows Live Essentials
  Click here: [uninstall / change]
  Click here: [continue] (Windows requires permissions)

  Uninstall or repair your Windows Live programs
  Choose: (*) uninstall
  Click here: [continue]

  Select the programs you wish to uninstall
  Choose: [] Family Safety.
  Click [continue]

  Uninstall the program

  Fact
  Click here: [close]

  [X] close the control panel.

  ||

• What is blue screen and what to do and how to fix this with out taking back to factory setting and reinstalling Vista

  What is blue screen and what to do and how to fix this with out taking back to factory setting and reinstalling Vista

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Send a copy of your dumpfile as a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65