What is the tool to bless and why it prevents a clean reinstall?

Similar Questions

• What is the purpose of VTEncoderXPCService and why should I use so much CPU?

  As you can see in the image as an attachment, it consumes about 300% of the power of my CPU:

  

  This causes in turn my MacBook Pro CPU to heat and speed up the rotation of the fan.

  What is the purpose of this process? Why is it so CPU intensive even if the Photos app is sitting idle in the background?

  Thank you.

  Why is it so CPU intensive even if the Photos app is sitting idle in the background?

  As you probably know, the conditioned XPCservices which can access the sandbox of a request and securely communicate with him. When you import new media or migrate a photo library, it will create thumbnails and previews of media in the library.  'S done it by background processes began to take photos. These will be run and is same photo is apparently inactive. After the importation of the new media, it is best to keep the pictures running overnight to get background processing as long as you don't need a mac for other tasks.

  VTEncoderXPCService and VTDeoderXPCService convert your videos. If one of them is hogging all processing power, this may mean that you have a lot of videos in your library requiring a conversion or one of your videos is damaged or uses a codec that cannot be treated by pictures. Have you recently to import new videos or migrate a library with videos?

  If a video cannot be treated, remove it from your photo library.  To find the culprit, try to read your videos into pictures.

• What is the "system idle process" and why it seems to freeze my Windows XP and show the 99% CPU usage?

  This problem sometimes occurs when my computer starts. Today, it happened and actually picked up my internet connection, which also won the update of Flash Player and Internet Explorer open. Also, I couldn't get the Start Menu to open. What is happening to the CPU is too busy doing something else? Is there a way to refresh the process or the CPU?

  Hi Hope_H,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. do you have security software installed on the computer?

  4. you receive an error message?

  Checking service or program uses high processor usage by using Task Manager.

  To view the CPU usage, press CTRL + ALT + DELETE, click Task Manager, and then click the performance tab.

  Overview of the Task Manager

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/taskman_whats_there_w.mspx?mfr=true

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• What happened to the filter oil painting and why? John

  What happened to the filter oil painting and why?

  Hi John,.

  You can go through this link, it provides information why the oil filter has been removed from Photoshop CC 2014. but you can always download the version of Photoshop CC which is a version of back and it still contains the oil filter.

  Photoshop: Spring cleaning | Blog of Adobe Photoshop

  Thank you

• On opening gogle I get the message: "ATTENTION!" Your Flash Player can be updated. Please update to continue"- by clicking on ok I am confused to download Flash Player Pro site? What is an Adobe product? And why, even if I have the most recent flash playe

  On the opening of google, I get the message: "ATTENTION!" Your Flash Player can be updated. Please update to continue"- by clicking on ok I am confused to download Flash Player Pro site? What is an Adobe product? And why, even if I have the latest version of flash player I received several times the message?

  This isn't a message that provides Adobe, and I recommend that you do not click the link. It seems you may have malware on your computer.

  For more information, see: http://malwaretips.com/blogs/warning-your-flash-player-may-be-out-of-date-virus/ or http://wasconet.com/how-to-remove-warning-your-flash-player-may-be-out-of-date/

• What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

  I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

  AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

  Mesh

  • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.
  
  
  • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient
  
  
  • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.
  
  
  • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

  Ports

  • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
  
  
  • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

  Problem solvers

  • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
  
  
  • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.
  
  
  • Several AXIEM processes are multithreaded as EMSight.

  Speaker

  • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

  I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

• What is ms away mode system, and why do I need?

  What is ms away mode system, and why do I need?  This just showed on my Vista system and I "".m "not familiar with it

  See the information here:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/gg463208.aspx

  Tom Ferguson

• What is the purpose of ASAv and physical differences?

  Hello dear friends!

  I'm a newbie in network.  I have a task in my FIRST job for the ASAv: what is needed for installation, requirements for hardware, software and so on.  But I don't know anything about ASAv. I have red some materials already but now I have a few questions:

  1. What is the purpose of the ASAv?
  2. What is the difference between ASAv and ASA physical, except that one is virtual? (objectives, functions and so on)
  3. What is - this to implement ASAv, when/why/where is it necessary use ASAv?

     Thank you! :)

     PS sorry for my English, it's not my best skills.

  1. If you have virtual servers in wmvare and you want to protect some servers to another, so you need asa virtual wmvare

• What is the use of links and the executable section in a pageDef?

  Hello

  What is the use of links and executable section in a page view definition file.

  I know that we can add different types of links to page with links that are not there in the page what use executable?

  If I click on the icon I get different types of iterators and stocks + green. If the two are even why we we both kept?

  Thank you

  REDA

  Hi Ashish I put in it,

  Now, only I realized the problem is with the lifecycle ADF

  If I place a logging operation in the method of the request form, we will see that the method is called twice and that is why exceptions are thrown. Change the property of refreshment of the invokeAction of prepareModel to renderModelIfNeeded. The commit operation will work with this change and the invokeAction will be called once again because it will be necessary. Once again, the point of the example is to call the invokeAction but for the validation button, as is evident, the value of prepareModel was not enough. The value renderModuleIfNeeded ends the validation operation. .

• The upgrade of the tools of vm and vm hardware version

  Hi all

  I've recently updated our vCenter for version 5.0 Update 1 and we have a mixed infrastructure composed of running ESXi 4.0, 4.1 and 5.0 ESXi ESXi hosts.

  I need some clarification on versions of database tools to the virtual machine and vm hardware version.

  I read that if I pass the hardware version to 8 on my virtual machine, then no matter what host running a lower than 5.0 ESXi will not be able to see these vm... is this true?

  Also vmtools being dependent on the ESXi host version, what is the best way to upgrade for my vm vm tools? Upgrade of all virtual machines that are on 5.0 ESXi hosts?

  Really, what I'm asking, is how to manage the tool of vm and vm version levels of material in a mixed environment of ESXi.

  Work wants everything to be more 'late', but it is simply not possible with some hosts on ESXi 4.0 and ESXi 4.1.

  Thanks in advance.

  Yes, it's true. HW version 8 is only supported on ESXi 5.0 and later.

  In order to upgrade the version of the material, you must be on the last tools first in any case - this is the recommended method. In order to upgrade the version of HW, you need to fuel the VM so this failure should be taken into account in your courses on the latest plans.

  Personally, I use PowerCLI to upgrade all the tools and cela as part of the monthly patch cycle when failures are already planned. You can install the tools without a reboot in advance by using the switch - NoReboot in your syntax PowerCLI (although there is a clause in the help files that says something along the lines of reboots may still occur in some circumstances, but I haven't done this experience yet).

  In regards to the HW version, I try to upgrade downtime is planned and only to force an upgrade, if I need a feature not supported on an earlier version.

  in your case, if you have any mixed clusters or there is a chance that you will need to migrate a virtual computer on an older host go then the virtual hardware. When I upgraded to Version 5, I ensured that no virtual material has been updated so that all guests were on ESXi 5.0... But also rememer that new VM created on your hosts 5.x will HW version 8 and will not be able to run on hosts earlier.

  Post edited by: jrmunday

• What is the difference between EPMA and Essbase Studio

  If the two are not used to design applications?
  
  And a really need Essbase Studio?

  What is the difference between EPMA and Essbase Studio

  ^ ^ ^ It's a little confusing, isn't? As far as I understand the role of EPMA, it is a way to share dimensions and common data between several products Oracle EMP including Planning, Essbase and HFM. In fact, I don't know if other products live in EPMA. What is EPMA not have is a great way to supply or manipulate the dimension and fact tables (or files). Oh, there are tables of the interface, but you will write the code/use the utility of dimension EPMA to load dimensions. I must say that I never tried to load through EPMA data so that someone else will have to pronounce on it. Once the dimensions are built, you can deploy Essbase (and other products) of common and specific to the database dimensions.

  Studio is the tool you will use to go against a data warehouse, or something terribly close a data warehouse to build Essbase databases. Just for Essbase - HFM, planning, etc. are not the targets of the Studio release.

  What gets confusion / intriguing, is that when EPMA deploy Essbase apps, it uses Studio under the covers to do. So the interesting implementations where people use Studio (which is much more flexible than EPMA because it is a development tool as opposed to a dimension/data management application) to read the tables, EPMA interface (and as far as I know, the EPMA base tables) and create Essbase applications like that.

  If you think that there is overlap, I agree with you, but you can see that they are not the same.

  And a really need Essbase Studio?

  ^ ^ ^ Do not use Studio to build Essbase databases. You can go hog wild in EAS with loading SQL rules if you want, even if at some point it will be probably easier and simpler to build in the Studio. Although the Studio has been mentioned as the replacement of EAS for awhile, I suspect the effort required to build a database in Studio will keep around for quite a while EAS or Studio Lite will be out. There is a lot to say (sometimes) for the incredible flexibility EAS/Essbase-Studio requires a more methodical approach and EPMA has a very formal set of standards and methods.

  Phew, I'm sorry, I wrote a book on this subject and I bet you get a lot of differences of opinion on that.

  If you are interested in the Studio, you could do well to take a copy of 'Look smarter than you are with Oracle Essbase Studio 11' of Glenn Schwartzberg. I don't get a penny from the sale while I was among the writers of copy (Hey, I got a mention in the acknowledgements). It's a good book and an excellent introduction to the tool.

  Kind regards

  Cameron Lackpour

• What is the difference between ActionEvent and SelectionEvent?

  Technical environment:
  Oracle jDeveloper 11.1.1.4.0
  Windows XP
  ----------------------------------------
  
  I think there is something behind ActionEvent and SelectionEvent which makes my code does not work.
  
  Here's my problem:
  
  I have three tables. One is a masterpiece, contains the summary of something. If I select a line on this chart, the second table shows some data, based on the line selected on the first table. Well Yes, it is a ViewLink, and it works perfectly. Now, I want the same thing to work between the second and the third table. If I select a row in the second table, the third table should show some data, based on the line selected on the second table. The third table is a ViewObject with some binding settings. I need to assign values to these parameters, that I get the value of the line selected on the second table. How can I do this?
  
  I tried to use ExecuteWithParams. Select the line in the second table, get the values, pass it in the form ExecuteWithParams, run and... it works... I get the result on the third table. Here is the code how to:
  
  ***
  {} public void updateTableEvent (ActionEvent actionEvent)
  DCIteratorBinding iter = gen.getIteratorBinding("SearchView3Iterator");
  Line rw = iter.getCurrentRow ();
  
  oracle.jbo.domain.Date strDate = rw.getAttribute ("Tgl") (oracle.jbo.domain.Date);
  String strRkno = (String) rw.getAttribute ("Rkno");
  oracle.jbo.domain.Number strRkId = rw.getAttribute ("Rkid") (oracle.jbo.domain.Number);
  
  DCIteratorBinding iterParam = gen.getIteratorBinding ("variables");
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pRkId", strRkId);
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pTgl", strDate);
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pRkNo", strRkno);
  OperationBinding operationBinding = gen.getOperationBinding("ExecuteWithParams");
  Object result = operationBinding.execute ();
  }
  ***
  
  But when I tried the same thing on SelectionEvent, I did nothing... no error and also no results. What I want is just to select the line on the second table and get the result on the third Board, not any pressure from button. Here is the code:
  
  ***
  {} public void onRowSelect (SelectionEvent selectionEvent)
  DCIteratorBinding iter = gen.getIteratorBinding("SearchView3Iterator");
  Line rw = iter.getCurrentRow ();
  
  oracle.jbo.domain.Date strDate = rw.getAttribute ("Tgl") (oracle.jbo.domain.Date);
  String strRkno = (String) rw.getAttribute ("Rkno");
  oracle.jbo.domain.Number strRkId = rw.getAttribute ("Rkid") (oracle.jbo.domain.Number);
  
  DCIteratorBinding iterParam = gen.getIteratorBinding ("variables");
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pRkId", strRkId);
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pTgl", strDate);
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pRkNo", strRkno);
  OperationBinding operationBinding = gen.getOperationBinding("ExecuteWithParams");
  Object result = operationBinding.execute ();
  }
  ***
  
  Then. What is really going on here? What is the differece between ActionEvent and SelectionEvent? Why did give me answer of difference?
  Thanks for your comments.
  
  
  Kind regards
  Novan Ananda

  Hello

  did you tried third table PPR.

  Simply give the id from table2, table3 partialtrigger.

• What is this Google plugin Widevine, and why can't find it in my Mac Finder?

  What is this Google plugin Widevine, and why can't find it in my Mac Finder? You should have a right click on the Add-ons, to 'show in Finder '!

  Although it's called a plugin, it is not one plugin like any other that you can find in a file, but a piece of embedded code. Other plugins are often part of the operating system or systemic at least installed, as opposed to extensions. However you can disable - see content DRM Watch on Firefox for instructions.

  That answer your question?

• What is the difference between readResourceContent and services ReadDocument...

  What is the difference between readResourceContent and services ReadDocument...

  Why if I create the file or folder write document\ create the directory, then it is not visible from the work bench...

  If I create the file using WriteDocument... It shows the created path

  / Apps/KI01/AF-was61-PP01/AppServer/Profiles/AF-node61-pp

  01-01/uploadfiles/test.PDF

  It is what... tell me differences...

  ReadResourceContent is used to read the documents in the repository of LiveCycle (the database LiveCycle).  ReadDocument is for reading binary files to the file system of the server (hard drive).

  If you create a file with write document\ create a directory it goes on the servers file system - its disk hard - and not in the repository of LiveCycle (the database).  Indeed, the repository may be hosted on a different server (in the case of a remote database).  If you write a file "/ apps/ki01/af-was61-pp01/AppServer/profiles/af-node61-pp01-01/uploadfiles/Test.pdf", then check the hard drive of the server, then you will see the files are there. If it is a control of the C: drive for this file Windows box.

  file system (hard drive)! = repository (database)

• What is the best between Firefox and Aurora?

  What is the best between Firefox and Aurora?

  Hello DarshanK, that depends on what type of user you are probably: https://www.mozilla.org/firefox/channel/