What is the way to read NIRFSG_ATTR_SPECIFIC_DRIVER_REVISION
Basically, I need to read the version of the driver installed NOR RFSG programmatically. The help of RF signal generators OR talk about this property - NIRFSG_ATTR_SPECIFIC_DRIVER_REVISION. However, I can't find the right way to read. What I have to use the standard OR-RFSG property get method or I do not get a handle to a generator?
Thank you very much
-Ilya.
Ilya,
To use the nodes property or the features included with the RFSG driver to pull the driver version by programming information, you'll need to get a handle to a generator.
If you need a way to check the version of the driver programmatically without the handle, I would recommend the search by querying the Windows registry information. The sample code posted on our community here: determine the current Version of VISA by program, shows how to VISA, and it seems like it should be possible for our other drivers as well.
Thank you
Eric K
Engineering applications
National Instruments
Tags: NI Software
Similar Questions
-
What is the way to find out which app is downloading data from the internet?
Every time I connect to internet, I see that nearly 100 MB of data is is downloaded, without my consent. I did almost all the applications that I know to ask my permission before you download.
Yet, some applications are downloading data without my consent.
I would like to know what are the applications that do.What is the way to find out which app is downloading data from the internet?
There is background applications that automatically transfer and receive data when the computer is connected to the internet. Try if there is active apps running.
1. click Alt + Ctrl + Del to go to start Task Manager / Applications and end unnecessary tasks.
2. go in Control Panel / programs / uninstall a program and uninstall unwanted programs.
I hope this helps.
-
What is the way to apply the sequence ATG?
What is the way to apply the sequence ATG?
for example, if I want to order numbers to increment in order 1,2,3,4,... What is the way to do it?Best way to generate an ID field is by the use of an IDGenerator. It is not guaranteed to generate numbers which are contiguous.
To get numbered contiguously order numbers, I guess you could add another field to the order and have a database trigger that will select the next value in a sequence in the database itself. In the application could get complicated if there are multiple instances ATG running the same application.
-
What makes the JAWS screen reader compatible VM
Folks iHi
I have a screen of several entities collect Interview which is analysed from the ContainmentRelationshipControl.vm and there are different entities on collected screen atm.
I use JAWS (Insert + F3 > > edit boxes/labels) to playback of these entities. However, to make it more accessible, I'm trying to customize entities on the screen by using a < span class = "visuallyhide" ">$ {counter} </span >"
where the counter variable is initialsed in one of the loop foreach above vm IE
#foreach ($otherInputControl in $collectControls)
#set ($counter = $velocityContext)
#end
But my action "view page source" in the browser properly displays the value of the counter by label instance & question but the JAWS, screen reader (insert + f3 > > edit boxes/labels) reads the counter value = 3 (there are three cases to the screen for example) for each label/question instance that is not correct! Why the JAWS not reload the page and deduce by vm? why he reads our the final value of the counter? It does not read the html code that form in the page source?
Waiting for your advice.
Thank you very much
Angie
Hi Frank
I found the solution. JAWS, read the last HTML source code in the and substitution of the variable as mentioned earlier, the reason being that my label was as below:
Since my body had text entry: Address1: (global_addressline_t) which was common to all instances form on the screen. The jaws were attributeId and text all the same so he gave reading of as is, replacing and the value in the text box correctly.
Thus to make the JAWS single reading to what address he read IE text box address of first instance or second instance, I had to make the unique AttributeId in the following way.
-
Sony ILÇE-7R - what is the speed of read/write in the camera
I have several Sony ILÇE-7R cameras used for a given application where more than 80 panes in a row with 1 second interval occur.
When you are taking pictures on a 1 sec shutter time / 1.2 s, then the camera tends to slow when writing the buffer on the SD card. (A suitable high-speed sdcard has been used). When the buffer is disabled on the SD card, then the camera accepts no any command of the shutter (IR Led or cable gives the same question), so I'm missing components/images.
What is the read/write speed in the camera?
What are the compensation of buffer time?
Are there settings that can improve the buffer time on the SD card, while taking still pictures of compensation?
Is there firmware settings that have been implemented to improve the write speed camera?
Thank you very much
Kind regards
-
What are the ways to vCenter 5.1 5.0?
I have vCenter 5.0 with joint hosts, most of them is ESX 4.0, two of them is a 5.0 ESXi. I would like to upgrade vCenter to 5.1.
What is the best and least disruptive to do? I am considering an upgrade in place against the construction of a new 5.1 vcenter and then migrate all hosts in
This vCenter. What is the best and least disruptive to do? Both are considered as valid ways to achieve the same goal?
Thank you
Another option that you have, and the way I just made, must continue to operate your vCenter 5.0. Start the installation for the SSO to the ISO 5.1 and get that working first. It is not interact with 5.0, so you should not spoil anything. Once you have that working, you can install the WebClient service too and also get that works - it interacts with SSO, then you can experiment and make sure it's all happy. Once all this is done, take your time, and then do the rest of the upgrade to vCenter 5.1.
I guess ours was a fairly simple installation - we run all services on the same Windows Server vcenter, and we were already in SQL 2008, so it was not too serious - it was with 13 ESXi5.0 9 ESXi4.1 hosts and about 180 guests.
The WebClient/SSO Service took me a few hours to do in February, and the last part of the upgrade to vCenter took a few hours of time to do last week. Of course, you can add another + 2 hours for installation of syslog, dumper, autodeploy, vShield and other pieces that you have.
My biggest fear was of all the horror stories I had heard about the SSO installation, that is why I am and out of the way first.
Of course, I'm always build and test my image ISO ESXi5.1 of installation etc.
G
-
What is the way to place a background Image in a Div?
I searched Google and Adobe forums for a while now, and although there are very valid solutions for similar problems I discovered that none of them fixed the problem that I am facing. I blame myself and get lost in this encoding sloppy mine, so part of my plan was to start my stylesheet from scratch.
My question, what is the right way to add a background image in a div? I currently have the div albums following the css style "header", here's what I typed in this section:
< style type = "text/css" >
@import url("..) ("/ twoColLiqLtHdr.css");
. Header {}
Width: 1000px;
height: 300px;
background-image: url(Assets/HeaderTemplate.png);
background-repeat: no-repeat;
background-position: center;
}
The problem here is that the background image is not still appear. I would appreciate help, could someone inform me on how to do this so that I can implement images in div in the future without turning my coding in a bottom right mess?
Thank you in advance.
Try changing it to:
background-image: url('Assets/HeaderTemplate.png'); Also make sure you have the case appropriate for file names: for example
Assets = active
HeaderTemplate = headertemplate
etc etc.
Sometimes these things create problems.
Good luck.
-
What is the difference btwn Reader and Acrobat Pro?
Hello
My requirement in the broad sense of the term: I develop a VISITORS Info. Adobe interactive form, I have Designer 8.1 and Reader 9.0 in my Windows 7 laptop. When I checked the menu EDIT-> properties-> compatibility, its form Adobe XML File (XDP)
When I opened this interactive form to VISITORS in a browser, right click and PROPERTIES-shaped, then I saw the "PDF Version: 1.6 (Acrobat 7.x)" (pls. Let me know what is the right forum for me to post my questions)
My 1 subset of my requirement: Front desk guys want to open this form Info VISITORS and enters the address details + attached a copy of proof photo ID of the JPEG format + writes a few COMMENTS in the form
Pls. Let me know
(1) is that my software inventory is sufficient to move forward and to develop an interactive form (as mentioned Info VISITORS)? or I need more software?
(2) I've seen Acrobat Pro version 10.x... do I need this softaware so to get my requirement is (VISITOR Info)?
(3) what is the difference between 9.0 Reader and Acrobat Pro 10.x?
Thank you
No, you don't need a LiveCycle Designer to create forms. Acrobat is able to
by doing this.
I didn't say "creating forms", but "create files". However, the form fields are
interactive elements in a PDF file that users can fill (text boxes), or select
(buttons, drop-down lists), or press (buttons).
-
What is the way to faster/better load 160K every night?
Oracle 9.2
We have records of 160 K (maybe get new records in the future) that must be refreshed in the production database every night (complete emptying). I suggested that we need to truncate the data, and then do the bulk loading every night. What is the best/fast way? or a better way? How fast to bulk load 160K?
Appreciate any suggestions.
Thank you
S.Hello
Insert bulk is the right option. You have a test or development environment where you Messure it?
Concerning
Ignacio[My blog | http://oracledisect.blogspot.com]
-
I had this error for centuries and have searched all over the internet for months, but impossible to find something that works. What is the solution?
Hello
The question you have posted is related to Windows Live Messenger and would be better suited in the Windows Live Solution Center.
Please visit the link below to find a community that will support what ask you
-
My source data in the remote database schema (say C3.case). And I am trying to insert data of this CASE table in my database table (for example SIMS.case) I use the stored procedure to load the data.
I was going through the documentation and I thought that the creation of MV is not possible in this case is the source table in the remote database schema. Is this correct?
or create a link DB is the only option available to access the remote database schema table.
Thank you.
Hello
2929538 wrote:
My apologies for the bad conventions help. I meant remote schema.
the required data and the destination table, the two are in oracle, but in totally different schemas.
Yes, you said a table is in a scheme called C3, and the other is in a schema called SIMS. Are these schemas in the same database or in different databases?
If they are in the same database, then you do not have a database link. Or the other schema can reference tables in the other qualifying names correctly, for example
SELECT *.
OF C3. case_studies
...
assuming that the right privileges have been granted.
If the schemas are in different databases, a database link is the best way to access data in a database in a different database.
Without a database link, you will probably use some kind of use outside the database to write the data to a database, the file if necessary, transport and read in other databases. DataPump files of images or CSV files, as Paulzip said in answer to #1, could be used for this.
-
I deleted my documents accidentally, what are the ways to recover
I deleted my documents of the system folder. But it was not available in the recyclebin. How do I get it back please help me to recover my documents folder
I deleted my documents of the system folder. But it was not available in the recyclebin. How do I get it back please help me to recover my documents folder
"Deleting" a file does not delete actually it brand just space be used. There are third-party programs that can sometimes recover deleted files. The problem is that the space used by the file is likely to be replaced very quickly, and this makes the unrecoverable file.
So your chances of successfully recover this file are decent, if you try it again immediately after deleting it and quickly down. If you have used the computer since then (for example to read this answer and write that question), your chances may be very weak now.
But if the file is large enough, it's still worth a try. Stop using the computer in question immediately, if you haven't done so already. Download an undelete program (in here is one: http://www3.telus.net/mikebike/RESTORATION.html but there are many other choice; do a search) on a friend's computer and bring it to you on a diskette, CD, or drive to the thumb.
If that fails, your only recourse is to bring or send the drive to a professional file recovery company. This kind of service is very expensive and may or may not work in your case.
-
I have a subscription to create clouds. Applications are installed on both machines. One of them broke down. I have no access to turn off a single installation. How to proceed?
Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help
-read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html
-or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html
-
What is the way to rigth to card CASE and NVL?
I have the following statement, I need the card. So, how did you would map it?
SELECT i.id, h.year, NVL (o.code, 39) code.
CASE
WHEN (h.reg AS im %')
THEN im.trader
Of OTHER ex.trader
Importer of END
CASE
WHEN (h.reg LIKE '% EX')
THEN ex.trader
Of OTHER im.trader
END AS exporter,
(SELECT exco.pk_ex_codes
Of exco exempt
WHERE i.ex_code_a = exco.ex_code
AND exco.ex_type = 'A') ex_a,.
(SELECT exco.pk_ex_codes
Of exco exempt
WHERE i.ex_code_b = exco.ex_code
AND exco.ex_type = 'B') ex_b,.
FROM the points i.
h head,
o offices,
(SELECT a.trader, b.id
MERCHANT has, head b
WHERE b.exporter = a.internal_key) ex.
(SELECT a.trader, b.id
MERCHANT has, head b
WHERE b.importer = a.internal_key) im
H.id = i.id WHERE
AND h.office = o.code (+)
AND h.id = ex.id (+)
AND h.id = im.id (+)I would say it is the best way to do it.
See you soon
KatiaPublished by: Nawneet_Aswal on August 10, 2010 08:30
-
After insert trigger mutation of error, what is the way to overcome it.
I have two tables namely profiles_answers and user_profileanswers. Based on the requirement that is: when a user inserts the answer in the table of user_profileanswers I need to calculate the weight-age of this issue with the many options available in the profiles_answers table and update this table user_profileanswers age-weight. So, for that, I wrote the following after trigger insert. But when I try to insert it throws me error mutation. As I update the table, used to insert action in the trigger. Please let me how can know I solve this problem.
create or replace
AI_weightageCaluculation TRIGGER AFTER
FOR EACH row INSERT on user_profileanswers
BEGIN
DECLARE
v_a VARCHAR2 (50);
YaeUb VARCHAR2 (50);
V_c VARCHAR2 (50);
v_d VARCHAR2 (50);
ve VARCHAR2 (50);
a_weightage NUMBER;
b_weightage NUMBER;
c_weightage NUMBER;
d_weightage NUMBER;
e_weightage NUMBER;
BEGIN
SELECT option_a, option_b, option_c, option_d, option_e IN
v_a, YaeUb, v_c, v_d, profiles_answers FROM ve
WHERE profile_questions_id =: new.profilequestion_id;
IF (v_a IS NOT NULL AND YaeUb IS NOT NULL AND v_c IS NOT NULL AND v_d IS NOT NULL AND EV IS NOT NULL) THEN
BEGIN
a_weightage: = 85;
b_weightage: = 60;
c_weightage: = 45;
d_weightage: = 30;
e_weightage: = 15;
END;
ELSIF (v_a IS NOT NULL AND YaeUb IS NOT NULL AND v_c IS NOT NULL AND v_d IS NOT NULL AND ve IS NULL) THEN
BEGIN
a_weightage: = 85;
b_weightage: = 60;
c_weightage: = 30;
d_weightage: = 15;
END;
ELSIF (v_a IS NOT NULL AND YaeUb IS NOT NULL AND v_c IS NOT NULL AND v_d IS NULL AND ve IS NULL) THEN
BEGIN
a_weightage: = 85;
b_weightage: = 45;
c_weightage: = 15;
END;
ON THE OTHER
BEGIN
a_weightage: = 85;
b_weightage: = 15;
END;
END IF;
IF: new.answer = 'A' THEN
BEGIN
UPDATE user_profileanswers
SET weightage = a_weightage
WHERE user_id =: new.user_id
AND profileanswer_id =: new.profileanswer_id
AND profilequestion_id =: new.profilequestion_id;
END;
ELSIF: new.answer = 'B' THEN
BEGIN
UPDATE user_profileanswers
SET weightage = b_weightage
WHERE user_id =: new.user_id
AND profileanswer_id =: new.profileanswer_id
AND profilequestion_id =: new.profilequestion_id;
END;
ELSIF: new.answer = 'C' THEN
BEGIN
UPDATE user_profileanswers
SET weightage = c_weightage
WHERE user_id =: new.user_id
AND profileanswer_id =: new.profileanswer_id
AND profilequestion_id =: new.profilequestion_id;
END;
ELSIF: new.answer = ' THEN
BEGIN
UPDATE user_profileanswers
SET weightage = d_weightage
WHERE user_id =: new.user_id
AND profileanswer_id =: new.profileanswer_id
AND profilequestion_id =: new.profilequestion_id;
END;
ON THE OTHER
BEGIN
UPDATE user_profileanswers
SET weightage = e_weightage
WHERE user_id =: new.user_id
AND profileanswer_id =: new.profileanswer_id
AND profilequestion_id =: new.profilequestion_id;
END;
END IF;
END;
END;
Thanks in advance.
Hmm... Why do after insertion?
CREATE OR REPLACE TRIGGER BI_weightageCaluculation
FRONT INSERT ON user_profileanswers FOR EACH ROW
BEGIN
SELECT BOX: NEW. RESPONSE
WHEN 'A' a_weight THEN
WHEN 'B' THEN b_weight
WHEN 'C' THEN c_weight
When ' THEN d_weight
Of OTHER e_weight
END
in: new.weightage
(SELECT 85 a_weight
Case option_result
WHEN 31 THEN 60
WHEN 15 THEN 60
WHEN 7 THEN 45
another 15
end b_weight
Case option_result
WHEN 31 THEN 45
WHEN 15, THEN 30
When 7 then 15
END c_weight
Case option_result
WHEN 31 THEN 30
When 15 then 15
END d_weight
Case option_result
WHEN 31 THEN 15
END e_weight
FROM (SELECT DECODE (option_a, NULL, 0, 1) +)
Decode (option_b, NULL, 0, 2) +.
Decode (option_c, NULL, 0, 4) +.
Decode (option_d, NULL, 0, 8) +.
Decode(option_e,,0,16) option_result
OF profiles_answers
WHERE profile_questions_id =: new.profilequestion_id));
END;
/
HTH
Maybe you are looking for
-
Calibrate both screens thunderbolt
Hey everybody. I need help on how to match the calibrations of color on the two thunderbolt screens that are right next to each other. I hope that I can use the calibration of Apple. I really want to spend the money on the calibration tools. All grea
-
Satellite Pro A300: How to create the recovery disk
HelloI just bought a Satellite Pro A300 with Windows XP.I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.The information gives instuctions on how to proceed for the Vista machines, but
-
Yoga Pro 2 - Wifi only B/G, no N
I bought a Yoga Pro 2 from BestBuy the other day, and my roommate. We are IT guys and this for a living. We both noticed on ours we do not have Wireless N capability. We can see only B/G networks. When it is connected to the speed of the network show
-
Reset password for Age of Empires 3?
So I have 2 accounts of Age of Empires 3, one for myself and for my friends (in case someone else decides they want to play). I have my original account that I play, but has friends I never use. I have reaced level 120 on my original CD and want to
-
How to create a header for my magazine using InDesign CC
How to create a header that will be applied automatically to all of my pages in my magazine without having to type in one by one in a text box?