What is this update of firmware for Portege M400?

Support on the Toshiba site newsletter we 98082168 refers to a firmware update to correct 'white screen after waking from sleep state '.

I get this problem, but unfortunately, I am in the United Kingdom. Anyone know what is this update of the firmware, how can I check if I need it, and tips to keep her as the support United Kingdom said he doesn't know anything about this?

I assume you mean this Toshiba document we:
http://askiris.Toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1642 844xml & sliceId = & dialogid = 12943627 & stateId = 0% 200% 12941508 20

Please don t mix the Toshiba us with the European of Toshiba.
US books are all just different like laptops designed for the European market.
Using a laptop in US?
Have you tried to contact the ASP in the United States?

In any case, I have that support newsletter was created at 2007-01-24.
Perhaps the ASP to the United Kingdom should wait for more information and details.

Tags: Toshiba

Similar Questions

  • Error message on the download of update of firmware for airport

    Get an error message when you try to download the update of firmware for the airport. Have disabled the Wi - Fi for all devices; powering down of the airport; MacBook connected to the router via a cable; access to Internet but the download update still gives an error. Any ideas on haw to get the update, or what is the problem? Thank you.

    The error message say, exactly? What version of Mac OS X you are running on this machine?

    For updates of the firmware to work, you must be connected to your device from the airport and connected to the Internet at the same time. If you have a situation where you have to disconnect from the Internet to connect to your airport device, it does not work, at least not for the first time, you have to download a firmware version for the same model of AirPort base station.

  • Power failure during the update of firmware for Color LaserJet 2600n

    Just in the middle of the update the firmware for my Color LaserJet 2600n, the power is out. Now I can't get anything to happen on the printer. The screen, or the power lights and the error light, but it does not work when the power is put on. I think that he wiped the previous firmware and either had not started or has been along the way in writing the new info. Is it possible that I can cancel it and reload the original firmware? It hangs on my MacBook Pro running OS 10.6.8. The only thing that the instructions seriously cautioned against a interrupt the installation. Needless to say, this is exactly what happened when the power is out. Any help would be greatly appreciated.

    Randy

    Able to understand me. Has proved to be quite simple. Powered off the printer and turn it back on and represented the firmware upgrade program. The printer didn't restart automatically, so I had to power off and wait 5 seconds before feeding this back. Once he recalibrated itself (which takes several minutes), I was in business.

  • Update of firmware for HP Officejet Pro 7700 problem

    I need help with this problem, thank you for your time.

    Operating system is windows 7 ultimate

    Printer network cable (RJ45) and is recognized by the computer and is able to ping.

    I had a problem with the printer freeze and reset to make it work. Now, I want to update the firmware from R2004NXNeN0 to OfficejetProL7700_R2011PxN when I run the program it is unable to find my printer, I have the firewall turned off and other HP printers on the 'Wireless' network they don't show either. But I wasn't expecting to show.  What I am doing wrong.

    John

    Hi John,.

    I understand that you are looking to update the firmware on your printer. Here is the information on how to get the latest updates of firmware for your printer.

    Get the latest Firmware and updates

    Kind regards

  • Installed the wrong update of Firmware for my HP Laserjet 1102w

    There are two updates of firmware for the HP 1102w. An upgrade of the printer with Eprint mobile printing, and the other upgrades the printer with AirPrint services. Of course, I installed the wrong (eprint) and now the update of the firmware for AirPrint will not be installed because it says that the firmware is up to date. Does anyone know how to restore the firmware so that I can install the firmware with the features I want?

    Hello

    Any firmware update providing the last additional functionality and any previous firmware fixes as well.

    The latest firmware is version 20110826.

    Please print a configuration page holding the Cancel button for several seconds.

    I think that you should have the latest firmware now and should be able to use the Airprint feature.

    Check that your printer is connected to the same network of your iDevice and following the steps below:

    http://support.HP.com/us-en/document/c02623193

    Please let me know of any questions,

    Shlomi

  • Update of firmware for 40TL963RB

    Good evening!

    I bought a Toshiba 40TL963RB TV.
    However, after a collapsed while respond during startup (black screen and light green only).

    I used flash USD to engrave some firmware.
    However, this firmware was for television 40TL933.
    For example, I burned 3 files (on my USB key):
    TL_MBOOT_545609_INIT_CLEAR.bin
    TL_MFC_246009_INIT_CLEAR.bin
    40TL933K_644087_INIT_CLEAR.bin

    These files as firmware my TV works fine, wait for the DVB - T2.
    I guess that this 40TL933 is not compatible DVB - T2,
    However, my 40TL963RB should support DVB - T2 hardware (I read the specification).
    However, the feature DVB - T2 has been lost during the combustion of the firmware.

    I downloaded the latest firmware for 40TL963RB: tl963_993045.bin.
    I have renamed it to 40TL963_INIT_CLEAR.bin.
    television begins the process of updating the firmware, but unfortunately, it frozes (hangs up)
    during the update firmware on 1% (always).

    Also I tried other firmwares: TL966, TL968, TL969, a version of 933.
    The same result - hangs at 1% during the update.

    Any ideas?

    I guess I need binary MBOOT & MFC binaries for my 40TL963. Am I wrong?

    Thank you very much!

    Post edited by: GkmSoft

    In my opinion its very bad idea to use the firmware that is NOT specially released for your Smart TV.
    I don t think that the use of this firmware not compatible could be very useful.

    You said, your TV no longer responds to the start.
    In my opinion there is nothing to do with the firmware of the TV because TV should work even if the firmware is not updated. I think that your TV equipment malfunctions.

    I m not Smart specialist not in TV, but there is not a lot of parts that can be replaced: motherboard and LCD screen are the main components and I think that TV does not answer the needs of TVs one motherboard check

    By the way: I found the firmware for model: 46TL963RB
    [Firmware Update Version 6.9.9E.1 | http://www.dl.toshiba.com/tsb-dtv/NA/GB/DE/46TL963RB.html]

  • Matsu NEW * an update of Firmware for Qosmio F20 (PQF20) and F30 (PQF30)

    Exit the: 16/04/2007

    This update of the Firmware includes following changes: improved the recordability of DVD - RW media, increased reading ability against fine scratched DVD-ROM media, improved the quality of the recording to the Mitsubishi media.

    NES http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=eu&mode=allMachi & action = search & teddProduct = 652

    Thanks for this info, I have already noticed this update on the page, but this additional comment could be helpful to others here in the forum

  • Update of firmware for CD - RW drive to a Satellite P30

    Hello
    I have a Satellite P30 with a carpet * a DVD-RAM UJ - 831S installed. It's supposed to be able to cope with the CD - RW disks but when trying to erase a disc through the option to erase a disc from Windows does not appear. According to the help of Toshiba and the support Centre, I get the firmware available for the reader.
    Can someone help me? I have no idea what that means or where to get the firmware said.
    Thank you very much
    Brendan Mulholland

    Before update any firmware on the drive, you must test something different.
    I found here advice very useful on the forum.

    If you install DLA (drive letter access), then you can format rewritable CD or DVD with DLA.
    Then you can drag and drop files or folders on media CD/DVD-RW, with Solution Explorer, just as with hard disk.
    You can find DLA in C:\TOOLSCD.

  • Update of firmware for 30 d

    EOS 30 d: I thought I was to update the firmware, but missed the last of them, old several years now.  I 1.0.5 but 1.0.6 is indicated as the last.  When I go to the page of the software for 30 days, it shows the download, but by clicking on the button DL does nothing.  Apparently, the link is not active.  Where can I get a clean copy of this firmware update?

    Thank you very much.

    Found. Pop-up window was hidden on the screen. (Blushing)

  • Update of firmware for HP Officejet Pro 8600

    I have a 8600 Officejet Pro running on a home network where all computers run Windows XP Professional SP3. I installed all the updates the OS published by Microsoft.

    Updated the firmware of the Officejet device comes in a file named ojpro_8600_n911_a_1304A_10042013.ful.rfu and the instructions talk to unpack this file to get a file with the extension .bdl. I don't know what software will unzip a file with the .rfu extension so I don't know how to get to the .bdl extension. Can someone please explain to me how to decompress this file?

    Bob Porter

    Hello

    Have you downloaded the update of the firmware from the link below?

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-101905-4&cc=us&DLC=en&LC=en&OS=228&product=4323659&sw_lang=

  • What has been fixed in v2.10 for Portege M400 BIOS

    Can someone me pointing in the direction of a page that documents what is included/fixed in the new BIOS?

    Relative to the European Toshiba I site didn t find descriptions on renewals of BIOS.
    But I visit the United States Toshiba site and found some information.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

    Visit this site and chose-> downloads
    He chose the Portege M400 and go to driver downloads.
    The first should be BIOS 2.1. If you click the BIOS 2.1, you'll see the entire history of renewal.

    But I do not know if the BIOS since the US site is the same as that on the European site of m.

  • What is this update? (Qosmio G10)

    I received the email below from Toshiba. I hate the fact that they - in most cases - do not explain what is an update about and I also hate to install something I have no idea what it is.

    All done and can tell what it is? Is this somehow, or simply an extra utility. My WIFI works properly, so I did not any question about that.

    Thank you.

    PC: Qosmio G10
    Type: Wireless Lan Client Manager
    Taal: universal
    Besturingssyteem: Windows XP MCE

    A link of Klik om het hele artikel op you read more
    http://nl.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?id=35667&OSID=23&drive rLanguage = 42 & selectedLanguage = 12 & driverCountry = 41 & selectedCountry = 24

    Hello

    In my opinion that you need not explanation because the update type is clearly indicated. It's just Wireless Lan Client Manager and if you know what that means avoid any problem.

    Good bye

  • Update of firmware for PRST1 (1.0.04.12210)

    There is a new update of the firmware for the PRST1 - it solves the problem where using a flick of the very short page to turn a page may accidentally select words and start the dictionary - details are on the page Sony eSupport at the following address:

    http://eSupport.Sony.com/us/Perl/SWU-do... group_id = 5

    You can either use the download link on the above page or click help in the Reader for PC software and then click find updates , and then click OK to download the new update.

  • What's the power adapter of Tecra M4 compatible for Portege M400?

    After the failure of my Tecra M4, I bought Toshiba Portege M400. They batteries are the same.
    How compatible are adapters for machines?

    If they are compatible, for example can use one at work and one at home?

    Hello

    You can use them for both machines as the adapters have almost the same current. In your case, you can instantiate your idea with the help at work and another at home.
    I have 3 adapters that have classes 5A and I can drive almost all of my toshiba´s who need 15 v input voltage.

    You can also check current glancing at the bottom of the machine on this small silver sticker. Then, you can be absolutely sure.

    Welcome them

  • Update of firmware for r.620 750w power supply

    I'm under OME v2.0 and he pointed out that we need to apply a critical update to our power supply 750w on our servers r.620 (Power_Firmware_JX7PR_WIN64_09.2B.80_A00. (EXE)

    I installed the update on 2 of our r.620 servers and did not receive any errors.  After the update process is complete (and several reboots), it still shows the older firmware (v07.2B.80) is always installed.

    Curious to know if anyone has had this problem or updated their firmware to power supply.

    If you read the documentation on the 09.2B.80 update, it says:

    WARNING: after successful PSU FW updated on PSU PN: 5NF18 Version of FW on power supply must be 07.2B.80

    Before the update, my power supply has had the 07.2B.7D version and after the update, they have 07.2B.80. This means that they have in fact been updated. However, because the version of the package is 09.2B.80, things like OME will still say that they need to update because the version numbers do not match exactly. The most stupid thing ever and totally bored. All the time, I lost to try to get updated when he was already.

    www.dell.com/.../DriversDetails

Maybe you are looking for