What is traces of sti?

Similar Questions

• No access to the interface of the ASA by behind the other is

  Hello

  I am faced with the issue of not being able to access the interface of "dmz" behind the interface 'internet '.

  Here is a brief description of the topology:

  

  List entry on the internet access "," allows for 1xx.xxx.172.1 traffic.

  No nat is configured between these interfaces.

  The routing is OK because hosts on the DMZ network are accessible from the Internet.

  The software version is 9.1 (3).

  Security level of the interfaces is the same.

  Security-same interface inter traffic is allowed.

  Here's what packet trace says:

  tracer # package - entry internet udp 7x.xxx.224.140 30467 1xx.xxx.172.1 det 500

  Phase: 1
  Type:-ROUTE SEARCH
  Subtype: entry
  Result: ALLOW
  Config:
  Additional information:
  identity of the 255.255.255.255 1xx.xxx.172.1

  Phase: 2
  Type:-ROUTE SEARCH
  Subtype: entry
  Result: ALLOW
  Config:
  Additional information:
  identity of the 255.255.255.255 1xx.xxx.172.1

  Result:
  input interface: internet
  entry status: to the top
  entry-line-status: to the top
  the output interface: NP identity Ifc
  the status of the output: to the top
  output-line-status: to the top
  Action: drop
  Drop-reason: (headwall) No. road to host

  Please help me find the cause why asa is unable to find the path to its own interface.

  Thank you in advance.

  Hello

  You will not be able to connect to an IP address of an interface ASA behind another ASA interface. It is a limit that has been there for Cisco firewalls as long as I can remember.

  The only exception is when you have a VPN connection that is connected to an ASA interface, then you can connect through this VPN connection to another interface of the ASA. In this case the ASA will also require that you have the following command

  access to the administration

  Where is the name of the interface to which you are connected.

  -Jouni

• Citing question regardng XML maps

  I'm just finalizing on my app, when I see something strange:

  Page 17 (on the GPS and BlackBerry Maps Development Guide) has a XML call to structures of cards with a "" wrapper, while starting page 19, is "".

  Whatever it is, my code does not work. I get an "Exception number Format" which is confusing to me. I'm running a simulator 8330.

  Note: if I do not include the document in the chain, I get the card, but with the default location. I guess the problem is with the XML document.

  Here's my code string:

  String document ="
  "" dataset.elementAt(i+3) + "------" lat =-+.
  "" dataset.elementAt(i+2) + "------" label = "" + \
  "" TEMP + "------" description = "" + \
  TEMP + "-" zoom =------"4" / >«;»

  Here is my code Invoke:

  Invoke.invokeApplication (Invoke.APP_TYPE_MAPS, new MapsArguments (MapsArguments.ARG_LOCATION_DOCUMENT, document));

  That's what I trace in the console:

  Any help would be much appreciated! Thank you.

  Delete the point

  LON = "-80.52070' lat ="43.46310" at lon = lat '-8052070' = '4346310. '

• Monitoring DBMS_JOBS status

  Hi all
  
  I have Oracle 11 GR 2 on windows 2008 server R2 64 bit version.
  its my environment.i of development gave to create, delete, modify dbms_jobs to other users, when I check in user_jobs some body changed last_date column...
  So question here is I want to know who changed the column?
  1. do we have any what display where we can verify and meet this change?
  2.i have trace enabled in my database. but I do not know what file trace should I check?
  3 and if I want to follow this, how is it possible?
  
  Thank you and best regards,
  Vikash Jain (Junior DBA)

  As said sangare values will change if the task is completed successfully.

  You can see who ran that work by querying the view user_jobs;

  If auditing is enabled, then you can query

  SQL > SELECT user name, owner, obj_name, action, timestamp FROM dba_audit_trail;

  to display the user who performed the action on the database.

  If you want to learn more about the audit through the link below

  http://www.Oracle.com/technetwork/database/Audit-Vault/learnmore/TWP-security-auditperformance-166655.PDF

• Concatenation of parentheses

  I have a few buttons named StrAdd, DexAdd and ConAdd within a clip. When you click on them, they all call the same function that is trying to do some calculations on the element 0 in a table on the main timeline, based on the name of the button. The names of the tables are StrArray, DexArray and ConArray.

  StrAdd.addEventListener(MouseEvent.CLICK, plus);

  DexAdd.addEventListener(MouseEvent.CLICK, plus);

  ConAdd.addEventListener(MouseEvent.CLICK, plus);

  function plus(evt:MouseEvent):void {}

  trace (MovieClip (root) [evt. Target.Name.Slice (0, -3) + "Array [0]"]); "."

  }

  What I trace it as "not defined". My syntax must be disabled. Anyone know how to do it correctly? Basically what I'm doing, is make sure if you click on the button StrAdd, part evt.target.name.slice (0, -3) into just Str because it chops on the last 3 letters, then that concatenates with "Array [0] ' make him StrArray [0], which is in parentheses to make it a MovieClip (root). StrArray [0].

  Try:

  StrAdd.addEventListener(MouseEvent.CLICK, plus);

  DexAdd.addEventListener(MouseEvent.CLICK, plus);

  ConAdd.addEventListener(MouseEvent.CLICK, plus);

  function plus(evt:MouseEvent):void {}

  trace (MovieClip (root) [evt.currentTarget.Name.substr (0.3) + "Array"] [0]);  or, MovieClip (root) [evt.currentTarget.name.split("Add").join ("Array")] [0]

  }

• Flex not including ArrayCollection collection passed to PHP

  First of all, I use Flex Builder 3, Wamp with 5.2.9 - 2 PHP and MySQL 5.1.33.  I also use the Zend Framework to retrieve data from MySQL.

  I have Flex using an HTTPService to send a request; the server is running then some PHP that reads a database MySQL, written each row in a table, all rows in a table.  Although I changed the actual data, here's what my returns a call on my MySQL database:

  SELECT  *
FROM  `table1`
LIMIT 0 , 30

  1 video filename.flv

  otherDescription 2 filename2.flv

  thirdDescription 3 filename3.flv

  The names of the columns are 'id', 'title', and 'source', respectively.

  Arrays in php seem to work very well, because in PHP,

  Print($result[1]['title']);

  We will give "otherDescription", and we can see that easily in Flex.

  The problem is I don't want "otherDescription; I want the whole table passed to Flex as a collection of table.

  I am able to pass the array from php, and then it's just a 'table' that I can't do anything with.  No matter what I trace him, he always says "Array", or it just doesn't work... Why is this?  Why can't I get anything out of it?  The thing is useful I can switch from PHP to Flex is a string, and it's awkward for what I do.

  Here is my PHP code:

  <? PHP

  require('Zend/DB/adapter/PDO/MySQL.php');

  $arr = array ('host' = > '127.0.0.1', 'username' = > 'root', 'password' = > ", 'database_name' = > 'videolist');

  $db = new Zend_Db_Adapter_Pdo_Mysql ($arr);

  $db-> getConnection();

  $sql = ' SELECT * FROM 'table1' LIMIT 0, 30';

  $result = $db-> fetchAll ($sql, 2);

  $resultArray = array();

  {foreach ($result as $resultItem)

  {foreach ($resultItem as $itemFragment)}

  [] $resultArrayFragment = $resultItem;

  }

  $resultArray [] = $resultArrayFragment;

  }

  echo $result;  or else, to illustrate how the collection of table, we can put "$result [1] ["title"]; ', in which case, Flex will show «otherDescription»

  to the traces below

  ? >

  Here are my relevant ActionScript:

  private function onResult (): void {//this is drawn, we get a result after calling the HTTPService send()

  var result = userRequest.lastResult;

  trace ("trace 1 =" + String (userRequest.lastResult));     product: 'table '.

  trace ("trace 2 =" + result [1] ["title"]);                           product: 'table '.

  trace ("trace 3 =" + result [1] ["title"] [0] [0] [0] [0]);            Product ALWAYS just: 'table '.

  var someDataProvider:ArrayCollection = new ArrayCollection (userRequest.lastResult.valueOf ());

  trace ("trace 4 =" + result [0]);                                     product: "RangeError: Index '1' specified is out of range...". »

  .

  .

  .

  }

  XML is fine for small amounts of data, you can use the object of the authority which is fast and lightweight. In my opinion, by far the simplest is Jason.

  PHP can encode and decode Jason, you can load a library in flex jason and decode and coded.

  Works perfectly, is now my main way to communicate with PHP.

  Google flex and jason there are tons of projects there.

• Entrance area of text in Flash 8

  Hi all, I came across a problem this morning, I was able to find a work around.
  I have a button and a text box on standard input. What I want to do is you (release) trace the value of the input text box (no big deal right )
  
  That's what my trace returns as: (not good when you try to get the var)
  < TEXTFORMAT LEADING = "2" > < P ALIGN = "LEFT" > < FONT FACE = "Times" SIZE = "12" COLOR = "#000000" LETTERSPACING "0" KERNING "0" = = > Hello World < / POLICE > < /P > < / TEXTFORMAT >
  
  now the job is about I save the file as a test MX04 again and he returned as
  Hello world
  
  While he is with that? Any ideas?
  
  Thank you
  Bobby

  you use auto kern on your textfield. which is causing it to be formatted for html text.

• dynamic text color

  I am trying to use an xml document to dynamically load the color of the text in my film and I can get the color, but when I try to use this value to change the color of the text, it does nothing, how can I get this to work?
  
  Thank you
  
  This is my code:
  
  

  There are two problems here I think.
  1. get the correct value.
  var txtColor:Number = XPathAPI.selectSingleNode (this.firstChild, path + "/ textColor / *");

  This probably gives you a correct path (if the xpath expression is correct for what you want to do), but the track is misleading.
  trace applies to the toString method to its arguments (I think). And by putting the: number is not a number, the compiler treats just like one.

  What you actually have is the following:
  var txtColor:XMLNode = XPathAPI.selectSingleNode (this.firstChild, path + "/ textColor / *");

  What if
  trace (txtColor.NodeType)
  Watch "3" then you have a node that contains the value you want.

  So, try this:
  var txtColor:Number = number ((XPathAPI.selectSingleNode (this.firstChild, path+"/textColor/*").nodeValue);

  This * should * you get the value you need.

  2. assignment of the value

  If the works above, then assign the number must be very well... but just to clarify other points...
  Regardless of if its flash 8 or flash CS3 compiler will give an error with the assignment of the string textColor property of a textfield if your textfield has been declared as a TextField.

  For example
  It does not work:
  var testtext:TextField;
  testtext.textColor = '0xff00ff ';

  But it works without a declaration:

  testtext.textColor = '0xff00ff ';

  If you get this error, then you must use Number (stringValue) and it will work.

• Trace of IO: What is attribute 0xBFFF0002 VISA?

  Hi all

  The Question:

  Can someone tell me what VISA 0xBFFF0002 attribute corresponds to what I can follow the bug?

  The context:

  This week, I was invited to help solve some heinous bugs that others face.

  Continuing this theme, I have a VISA IO trace that someone gave me, and there are several rows with an invalid session/reference error.

  This error occurs when the "VISA Get Attribute (0xBFFF0002)" occurs. I really need to know which attribute it tries to fetch and a hexadecimal code said me nothing by itself.

  I saw that a few others these requests in the past have gone unanswered - I look forward to any entry.

  Thank you

  Mr. Jim

  file visa.h:

  #define VI_ATTR_RSRC_CLASS (0xBFFF0001UL)
  #define VI_ATTR_RSRC_NAME (0xBFFF0002UL)
  #define VI_ATTR_RSRC_IMPL_VERSION (0x3FFF0003UL)
  #define VI_ATTR_RSRC_LOCK_STATE (0x3FFF0004UL)

  .....

• What are some of the requests of users likely to be assigned to an officer IT worked at the Department of STI?

  What are some of the requests of users likely to be assigned to an officer IT worked at the Department of STI?

  Hello taki5910,

  This issue is beyond the scope of this forum.

  Please post this question on the TechNet forums:

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Best regards

  Matthew_Ha

• Is there a tool or a trace to show what wishes (standard or) currently playing?

  Monitoring Portstartus or port Viewer tool has.

  There is no real-time tool that displays this information, unfortunately - close - if you turn on the track "PhraseServer to Monitor" in the tool of diagnosis of the unit and look in the status of port manager, you will see the names of files for all the guests play and you are supposed to see the file names of the greetings as well--the names on these make clear who is playing (they contain 'standard') (, "offours" etc. in the name) - however it is said 'flow' now - I'll look into why it's not the file name.

  However, you can activate a trace to see this information in a newspaper if you need to. Again, in the unit Diagnostic tool go in the micro option footsteps and go to the section "Conv PHGreeting" - select "properties and Variables Values, #24 and click next - make a call into the system and struck a greeting and then go look in the \commserver\logs directory - you will see a file called 'diag_AVCsMgrxxxx' y and you will see your call - he's going to say explicitly what wishes is selected when the handler call/Subscriber is reached.

• El Capitan crash hearing CS6. Had to reinstall older OS that wiped my computer clean. No need to reinstall CS6 (which was originally downloaded from the Adobe site) but the Adobe site can find no trace of my download. What should do? Thank you!

  El Capitan crash hearing CS6. Had to reinstall older OS that wiped my computer clean. No need to reinstall CS6 (which was originally downloaded from the Adobe site) but the Adobe site can find no trace of my download. What should do? Thank you!

  Hi Jeremy,.

  I do not see a CS6 license registered, if you have any other email address with which you have registered it please check with this e-mail on your Adobe ID on the forums.

  Kind regards

  BANI

• Hi, my old broken computer and I lost my series for the Photoshop Elements 10. Curiously, there is no trace in my ADOBE ID on the purchase of this product. What could I do?

  Hi, my old broken computer and I lost my series for the Photoshop Elements 10. Curiously, there is no trace in my ADOBE ID on the purchase of this product. What could I do?

  Hello

  The following document can help you to locate your serial number of your product: find the serial number of your product Adobe quickly

  You can download the Photoshop Elements from the following link: using Photoshop Elements. Download Photoshop Elements | 10, 11, 12, 13

  Kind regards

  Shipti.

• How to identify what trace file is your track of backup controlfile in udump

  I have a 10.2.0.3 database under unix.
  I want to configure a job to run a script every night to save the controlfile as text.
  as "alter database backup controlfile to trace."
  How my script can identify what trace file is the only one created just for backup controlfile and copy the file on a backup drive?
  
  Thank you very much!

  I thought that there

  change controlfile backup of database to trace in the "absolute path to a file where you want that control to plain text file";

  e.g. on Windows...

  ALTER database backup controlfile to trace as *'c:\temp\create_ORCL_control.sql'*.

  This way, you will know where your work will backup controlfile to trace

• What do you think is the best way to overlay a XY trace on graphic intensity?

  I have some thoughts, but it was not a bad idea to ask this question to the experts here.  The coordinates of the XY plot can be unconnected with the coordinates of the ranges coordinated axe X and Y of the intensity curve.  A few thoughts:

  (1) knowing the X, Y coordinates of the plot, somehow use the draw capabilities to duplicate the XY trace - draw capabilities allow almost anything to be drawn on the charts with a smart programming.

  (2) similar to above, but in fact do, first display graphic intensity of the data in the picture in the image control control (the default container that I use is the graph of the intensity, but for this application, I can switch back).  Mask of image control capabilities can be used?

  Any thoughts are appreciated...

  Ah, I see. You'll really have to do something special. Just your graph XY to be transparent by using the color brush tool, remove the axes X and Y and just place it on top of the intensity card.