What is WDC WD10 EADS-65M2B1 SCSI Disk Device

Similar Questions

• H9 SCSI Disk Device

  My desktop computer HP Pavilion HPE h9 - 1215t Phoenix CTO has a hard drive WD 2 .0TB with the C drive, containing the Windows 7 operating system.  There is also a SCSI disk (MTFDDAK2 MTFDDAK256MAM - 1 K).

  What is the SCSI drive?

  "My H9 is an h9 - 1215t and the SSD 256 GB is not recognized when I go into computer, management of disk storage management."
  Computer Management displays:

  Disk 0 (basic 238.35 GB online) with 3 partitions; No name 100 MB EFI system Parition
  OS (C: 227,71 GB) and HP_Recovery (D: 10.54 GB NTFS).
  ---
  DISK 0 - it's essential / Micron (256 GB) Solid State Drive (SSD) with 3 partitions.
  DISC 1 - it's your drive Western Digital hard (2 TB).
  ---
  MS Windows 8.1 with UEFI and Secure Boot is significantly faster (almost compressed as) than MS Windows 7.
  I don't know how this specific HP computer was (originally installed) installation.

  You have applied the update driver Intel Rapid Storage Technology (RST)?
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-119917-1&cc=us&DLC=en&LC=en&OS=4063&product=5261660&sw_lang=
  ---
  The age of this SSD, MANY manufacturers released a updated firmware to date - to increase performance and respond to questions. For example, my SanDisk Ultra II SSD had a firmware update (2nd quarter 2014) that solved problems with Windows 8.1 reboot intermittently.

• T110 II - with Dell virtual disk SCSI Disk Device-WIN2012

  This server is running out of space on hard drives, 2 x 500 GB RAID1.  I want to wear it to 2x1To.

  At startup and Ctrl-f shows 2-500 GB in RAID1 disks.

  What is the right way to do this?

  I can stop and remove one of the 500 GB disks and replace it with a 1 to and let it rebuild once completed, repeat the same process?  Afterwards to have 2x1To in place that are synchronized, bootable and functional.

  N ° it is part of the hidden cost of buying low-end equipment. If you had a PERC 6/7, you could do it, but not with the SAS 5/6, which is very low end, material basis.

  rdurham

  It will take at least 24 hours to drive new format and sync and probably another 2-3 hours to restore if not more.

  You insert the new larger disks, configure RAID 1 and then restore your backup to it. You do NOT normally have to wait for it to completely initialize.

• How to find if a scsi disk can be used as a ROW or only use not vsphere CLI.

  Hi, I want to know if the SCSI disk can be used as RDM and a remote computer running vSphere CLI.

  I tried to use 'vicfg-scsidevs - l', but it doesn't have the required information list

  ===============================================

  Here is sample out put

  MPX.vmhba0:C0:T1:l0

  Device type: disk

  Size: MB 69459

  Full name: disk space from VMware (mpx.vmhba0:C0:T1:L0)

  Plugin: NMP

  Device console: /vmfs/devices/disks/mpx.vmhba0:C0:T1:L0

  Devfs Path: /vmfs/devices/disks/mpx.vmhba0:C0:T1:L0

  Seller: VMware model: Block device Revis: 1.0

  SCSI level: 2 is nickname: status:

  : RDM Capable is removable:

  Other names:

  VML.0000000000766d686261303a313a30

  empty fields "Is Capable RDM" here.

  =======================================================

  When I executed the command 'esxcfg-scsidevs - l' on an ESX Server, he gave me the necessary info.

  MPX.vmhba0:C0:t0:l0

  Device type: Direct access

  Size: 138919 MB

  Full name: disk space from VMware (mpx.vmhba0:C0:T0:L0)

  Plugin: NMP

  The console device: / dev/cciss/c0d0

  Devfs Path: /vmfs/devices/disks/mpx.vmhba0:C0:T0:L0

  Seller: VMware model: Block device Revis: 1.0

  : SCSI 2 is Pseudo: false status: on

  : RDM Capable false is removable: false

  Is Local: true

  Other names:

  VML.0000000000766d686261303a303a30

  So is it possible for vSphere CLI through which we can tell if the SCSI disk device can be used as ROW or NOT?

  and what parameter defined as capable of RDM?

  Thank you

  Chandra Sekhar P.

  Hi Chandra,

  In order to get the SCSI LUNS that can serve as RDM, you must use the QueryConfigTarget method. This method is defined on EnvironmentBrowser. You need to recover some EnvironmentBrowser object ComputeResource the HostSystem where the virtual machine is created. The configTarget.ScsiDisk returned after the method call contains the logic unit number information that is capable of RDM.

  I hope this helps!

  Neha

• Several stores data on the Local SCSI disks?

  Hi all

  Is it possible to have several data stores on 1 partition VMFS on scsi disk?  or have you partition than to install multiple VMFS partitions?

  I have 1 VMFS 500 GB partiton, but it does not chop into several datatsores?

  The 'fb' partition created during installation is the VMFS data store. You can add another disk and use fdisk without problem.

  To do what you want, I guess you would need to delete the existing partition and then use free space to create new partitions 2 or more which could then be formatted with the VMFS. It is a question of intresting so I thought I'd look around (not enough to trash my interesting, but interesting test server). I found this ad that may be useful

  http://www.virtualvcp.com/content/view/67/26/

  Think I might give this whirl next time, I have a system still undelivered to the customer

  Post edited by: bulb for spelling and clarity

• What happens on the free space of disks defragmenting the disc.when I used it is reduced. is this real case for all systems?

  What happens on the free space of disks defragmenting the disc.when I used it is reduced. is this real case for all systems?

  Defragmenter free space but can free report incorrect running after the space.

  Run disk cleanup before defragmenting...

• Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable.

  Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable. Is there a FDISK program that can be run to solve this problem from a command promt?

  Hello

  You try to access BIOS and change the SCSI to IDE in the BIOS or Raid in IDE and try to install Windows 7.

  If it fails, contact your SCSI manufacturer for the latest drivers for your SCSI and install it by clicking on load drivers and try to install Windows 7.

  Hope this helps and works.

  Chris

• What is the maximum size of virtual disk in machines virtual esxi 4.0

  I am trying to create a virtual disk to a virtual machine, I want to make the size of the 300 GB disk but its not allowing to create.

  Can I know what is the maximum size of virtual disk, we can create in machines virtual esxi 4.0 with vmfs3 partition

  
  

  The maximum size of the virtual disk that you can use depends on the size of the selected block when formatting of the data store. With the default of 1 MB block size, the maximum size of virtual disk on a VMFS-3 datastore is ~ 256MB.

  André

• Extend a thickness of stocked SCSI disk?

  It looks like so it is possible to extend a thickness of stocked SCSI disk.  It's not something I do very often does anyone have any notes on this?  It seems that snapshots should be deleted everything first.  It is a Windows 2008 Server.   Thanks for the help.

  Yes, it is possible with discs thin provisioned too.

  Basically you will ensure that the VM has no snapshots, increase the drive to the desired size in the virtual machine properties editor and then use the measure of volume inside the windows disk management console.

• How to fix windows in virtual scsi disk?

  Hi guys,.

  I have a server windows server 2008 in my computer running on wmware preinstalled. A week ago my server crashed. Now when I try to repair using the windows image, it says "Setup not found disk units installed on your computer.

  The drive I have installed windows is a SCSI disk (a virtual scsi disk, I have not all scsi devices connected to my PC). Without disks hard appear in the BIOS but if I am not mistaken, it's normal because only the SATA and IDE are see the place in the BIOS.

  I just need to repair windows using the iso, I have... Help, please

  most of the time the problem of 'lack of pilot' on Win7 and 2008 is bad downloads

• VI 3 virtual machine SCSI disk is changed on the IDE drive in vsphere 4

  Hi Experts,

  When the virtual machine SCSI disk is add to the Vsphere virtual machine, only the scsci disk 3 VI is replaced by the mode IDE drive can be added.

  How to solve it? Thank you.

  Add a SCSI controller on the virtual machine and then add the disk

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  -Josh

  Trying to learn

• VMware Vista support physical disk device does not not for some VM.

  I handle Win2k8 64 bit vm on esx5.5 Update 2 which are evidence of "Disk of Vista VMware help" have the error "this device is not present, is not working properly or is not all its drivers installed." (Code 24) ». Versions of VMware Tools vary, either 9.4.0 9.4.5 build-1585188, build-1598834 or 9.4.10 build-2068191.

  Google missed most of the time. I can't find any information on what concrete this virtual device is or what it does in particular, except that it may be involved in the creation of snapshots suspended.

  In addition, the device seems to be attached to the vmrawdsk service, which does not exist on the server. These virtual machines were not P2V, they have been created since iso win.

  One guess what it is and how I might be able to fix it?

  I got it on a working server my copy on the file vmrawdsk.sys missing a server well-known, uninstall VMware Tools, restart, reinstall it and restart again. Then the VMware Vista support physical disk device / service vmrawdisk are working normally.

• HyperDrive 5 and 'fixed Direct Access SCSI-2 device.

  Colleagues ESX - ers,

  I think to buy a very fast RAM-disk, the "HyperDrive5", in:

  http://www.hyperossystems.co.UK/

  It is fully compatible SATAII (and therefore must be recognized by my E200 very well). It is, will be virtualization ESX 3.5 as SCSI drive slow down questions too? My server lists current as disc:

  da0: fixed Direct Access SCSI-2 device

  da0: 320,000 MB/s transfers (160,000 MHz, offset 127, 16-bit),

  Tagged Queueing active

  Thus, when you buy the ramdisk, fixed Direct Access SCSI-2 unit of Vmware will be the bottleneck? Or it dimensionnera upward, in speed, according to the new features of the psycical (much faster) of the RAM disk?

  Thank you

  -Mark

  Hello

  If it works fine, but SAS, SATA, SCSI and RAM all have different performance characteristics. It will not change the other. The controller will be your factor limiting.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• VM disk devices

  Hi all

  can someone explain what the virtual machine disk unit (for example vmhba1:2:0)?

  In general, I need to find the data store that is used by the VM virtual disk device.

  Thank you.

  I see.

  First find the HostSystem and recover all attached data storage. So for the purpose of data store, see the "info.vmfs.extent" property, which gives you an array of HostScsiDiskPartition objects. Check each diskName to see if it matches your disc's canonical name. If so, this is what you want.

  Steve JIN, VMware engineering

  Creator of VI Java API: http://vijava.sf.net

• Inspiron 531 s (HL-DT-ST DVD +-RW GSA-H31N SCSI CdRom Device)?

  I CLICK ON 'START' CLICK ON THE COMPUTER AND MY E: DRIVE IS NOT THEIR... I WENT IN MY DEVICE MANAGER TO SEE IF IT IS THEIR... WHICH IT IS, BUT IT HAS A SIGN WITH AN EXCLAMATION MARK INSIDE YELLOW... WHEN I DOUBLE CLICK ON IT, IT OF WHAT IT ME SAID IN THE GENERAL FILE...

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I HAVE CHECKED FOR SOLUTIONS... I TRIED UPDATING THE DRIVER SOFTWARE AND IT ME SAID THAT "THE BEST DRIVER SOFTWARE FOR YOUR DEVICE IS ALREADY INSTALLED. "THIS DEVICE DRIVER SOFTWARE YOU KNOW."

  OH, AND I HAVE WINDOWS VISTA WHICH I AM NOT FAMILIAR WITH... I NEVER HAD PROBLEMS LIKE THIS BEFORE WITH WINDOWS XP PRO... I DON'T KNOW IF THIS HAS NOTHING TO DO WITH IT OR NOT...

  I RESTARTED MY COMPUTER... Press "F2" AND HE is BED THAT MY HL-DT-ST DVD +-RW GSA - H31N SCSI CdRom Device IS THEIR... I TRIED MANY THINGS AND NOTHING WORKS... ANY DISC I PUT IN, IT IS NOT READ... I TRIED TO BURN TO A DISC AND IT ME SAID 'YOU DON'T HAVE A HARD DRIVE CAPABLE OF BURNING FILES TO CD OR DVD.  I NEVER HAD PROBLEM BEFORE BURNING PHOTOS, MUSIC OR TEXT ON A CD 2 WEEKS AGO...

  Help, please!

  Thank you

  BAMF ~ CHEROKEE