What power supports PCMCIA on Satellite M40-184 location?

Similar Questions

• What memory can I use in Satellite M40-184?

  This memory module to add for laptop Toshiba Satellite M40-184?

  Hello

  Just a question;
  Search you the forum for similar issues before posting this new thread?

  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=50874&

  Do you need information?

• Satellite M40-184 MP3 without OS

  Hello

  I have laptop Satellite M40-184 and I would like to ask you, how to play MP3 on this laptop without OS for long time as possible. I installed the program of express Media Player, but it is not possible to play MP3 with it. Or y at - it an upgrade that would allow to read MP3?

  Thank you for your answer
  Best regards
  Pavel Zidlik

  Hello Pavel

  As much as I know there is no update that allows this option. Installation Express media player the idea was that the user can watch DVD movies and listen to music CDs without booting the operating system.

  Perhaps in the future the Toshiba will design a newer version that can play the mp3 music format.

  Good bye

• Satellite M40 184 - Question on battery and speakers

  Hello everyone.

  A few months ago, I bought a laptop (M40-184), which uses the harman Kardon speakers. I have two questions to ask you.

  1. the battery does not work for more than 1 hour (when the laptop is any more, or when internet explore is enabled). There are no other programs running. I think that this is not normal. What can I do? I'll be back there?

  2. speakers are a strange low frequency noise, when I'm listening to music or watching DVDs. It doen not to be little heavy or something. It was supposed to be a very good pair of speakes.
  What can I do?

  Thanks in advance

  Hello

  Usually battery working time depends on the use of the laptop.
  If you use a high performance such as 3d graphics tools tools, games or watch DVDs battery working time goes down.
  But if you only use the explore IE the battery should work more than 1 hour. In this case I think that it s a battery failure. If you need to contact the ASP for the replacement of the battery.
  In addition you must always remove the battery from the unit if the power adapter is plugged.

  2.) as far as I know that the Toshiba Virtual sound utility is preinstalled on his unit. Here, you can change some sound settings. Maybe you can solve the problem with the speakers.

  Best regards

• How do I start bluetooth on Satellite M40-184

  Hello
  I bought a new Satellite M40 and I found that I have the Bluetooth Manager, but it does not show me the that Bluetooth at all besides it still gives me the message "Bluetooth device is not ready" even when my bluetooth is turned on! Kindly let me know how to solve this problem, as I have been through the whole pages of starting Instructions and possible help, but nothing seems to work. Thanx

  Imran

  Hello Imran

  It will be interesting to know what unit should be connected to your device (mobile phone, printer). I hope that use you the FN + F8 key combination to activate the Bluetooth connection. If the Bluetooth connection is enabled you can start a wizard and search for other Bluetooth devices.

• Toll-free indicated what power disconnected from the Satellite L30-134

  I don't know it this the appropriate category, because I'm not sure of the source of the problem.

  Okay, here it is:
  I have Toshiba Satellite L30-134.

  Normally, when I unplug the cable of the AC adapter, 2 things happen:
  1 ATP icon shows that the current generator is the battery, and it shows invoiced % and about working time remaining before the battery is empty.

  2. the power management becomes more energy saving settings, and implementation Hibernate just until the battery is completely down.

  Well... Last few days things have changed:

  Now, when I unplug the power cable, the system does not recognize this and she continues to display: ' course Power Source: AC Power ', for the remaining capacity of the displays: "S/o" and the system is not hibernate, because he does not feel the difference.
  I'm not sure that this has something in common, buy, I found that the UPS SERVICE has been stopped, I tried to start it manually, but there is ERROR 2481: the UPS service is not configured correctly.
  Need help, please :-)
  OS: Windows XP, automatic updates, I did not notice if this happen after installation or any other measure of speciffic, I did...

  > Normally, when I unplug the cable of the AC adapter, 2 things happen:
  > 1. ATP icon shows the current generator is the battery, and it shows invoiced % and about working time remaining before the battery is empty.
  > 2. Power management becomes more energy saving settings, and implementation Hibernate just until the battery is completely.

  This process is correct. After disconnecting the AC adapter the laptop switches to the battery power and uses the Toshiba power saver mode the power created for the use of the battery.

  > Now, when I unplug the power cable, the system does not recognize this and she continues to display: ' course Power Source: AC Power ', for the remaining capacity of the displays: "S/o" and the system is not hibernate, because he does not feel the difference.
  > I don't know he has something in common, buy, I found that the UPS SERVICE has been stopped, I tried to start it manually, but there is ERROR 2481: the UPS service is not configured correctly.

  Well the ups (uninterruptible power supply) service could be responsible for this problem!
  If you are not able to start it manually, then it might be a problem with OS software.
  I studied a bit and found this article in the Microsoft Knowledge base about this problem.

  + Cannot start the UPS Service.
  http://support.Microsoft.com/kb/310437

  Good bye

• Re: What is the difference between Satellite M40-103 & Satellite M40 136

  Hi, can someone tell me what the difference between the two laptops;
  M40-103 and M40 - 136.
  They seem to have the same characteristics.

  Thanks in advance.

  Hello

  Yes, it is possible
  In most cases, the laptop hardware parts are the same, but only the system language is different, it means that the two laptops could be released for different countries.

  But the hardware specs are the same

• Satellite M40-184 and noise problem

  I bought two days ago, this laptop and I already found two problems. The first is that always before the speakers seem to start working a strange noise (ICT) and it is very annoying for me. Is there a problem with the speakers.

  The second problem is that when I use the laptop for more than two hours the AC adapter also makes a very annoying noise. He is also very strong (more strong that fans or anything else). Is it normal to do what noise?

  Thank you

  Hi Manos,

  I'm not sure of the sound from your speakers, normally I wait till they're totally calm, unless a job is running that use.

  Regarding your power adapter, should make any noise at all. It can become hot for what is quite normal. I would recommend the adapter/notebook back to your provider as soon as possible.

  Kind regards

• Satellite M40-184: Temperature increses to 95 degrees if CPU load fully

  Hello

  I have this laptop for almost two years and it works perfectly, but I discovered thease days that the temperature of the cpu at full load is charged to O it comes to 70 and 95-98 degrees celsius.

  My question is is there a hardware protection built into the motherboard of the laptop from overheating or shuold I worry more about the problem?

  I always keep a litle raised to allow the laptop airflowbelow and I can hear the fan operation.

  Hello

  It s nothing unusual that the CPU temperature increases to a higher level during the CPU works with maximum performance.
  It is a fact, not a problem!

  If you ask if there is a protection of equipment built into the motherboard to protect the laptop from overheating.
  -> Yes, the phone supports this overheating protection! If the temperature occurs at the critical level the laptop stops automatically.

  In your case the laptop no shutdown and so I don't assume that everything is ok

• Satellite M40-184: how to connect a projector?

  How can I connect to a projector?

  Thanks in advance

  Hello

  You can connect the projector with either an RGB connection or an S-video connection.

  Kind regards

  Nick

• Satellite M40 - the update of the BIOS

  I have Satellite M40-184 and I want to Flash the BIOS with a bootable CD, but can't do it.
  I downloaded the bios file - 20070709161345.zip and extract the file, but it gives me error to run the file.
  I extracted the exe with rar and I saw an image file, I burned it but it is not bootable.

  I have not now what to do WHOW can I FLASH THE BIOS NOT BY WINDOWS?
  I read the flashing method, but it has nothing to do with the file that is downloading.

  Hello

  The driver from Toshiba site doesn't provide the traditional BIOS but only the BIOS that can be updated only running Windows OS!

  This means that you will not be able to boot from the floppy drive using the unzipped BIOS file.
  It s .exe file and should be conducted under OS.

  I think it should be clear now.

  By the way; the update of the BIOS is risky and if you use bad BIOS or bad update procedure can damage the ROM. module

  Greetings

• What Type of PCMCIA is supported by Equium A200-1ED?

  Hello

  They gave me this old Equium A200-1ED which is too slow for window 8.

  Putting aside the expensive option of a SSD, I thought to install windows on an SD card but the BIOS do not see it as a boot device and the driver seems not to recognize as exFat and even then it only reads that 27.7 GB on a 64 GB card.

  So my next option is to get an adpater for the ExpressCard/PCMCIA location for the 64 Gb SD card that I hope the BIOS will be able to see as boot drive, but I don't know what Type (PIN configuration) of the card supports this machine slot.

  The driver seems to think that he supports PCMCIA, but I know that it is not a Type II, because I have a Type II device that does not fit into here.

  I don't want to open it, so I wrote to Toshiba, but I didn't get any answer.
  So maybe someone here can help.

  Any ideas?

  Thank you

  PCMCIA is designed for the use of some external devices, but the idea to use the preinstalled with OS boot device is really crazy. I'm pretty sure that this will not work.

  A few years ago, I had Satellite A200. It is the same model as your satellite. If you want to have good enough laptop s performance I recommend to install Windows 7 32 bit. This machine was designed for Vista, but it is supported for Win7 32 bit. WIN8 isn't the solution for this old piece of hardware.

  With Win7, it works fairly well, stable and faster than original Vista. SSD is very good way to increase the performance of s for laptop, but it costs a little. Anyway, you shouldn't buy the best and most recent SSD. You can get an opportunity for a lot of money.

  Anyway, combined with mise a niveau of RAM and Win7 installation is, in my opinion, best option for you.

• PCMCIA.sys problem with Vista on Satellite M40 135

  Hello

  (Sorry for my English)
  I tried to install Windows Vista on my Satellite M40-135. (I added the 512 MB of RAM).

  But, like all users, I have the problem with pcmcia.sys. Vista starts successfully when I delete the pcmcia.sys file.
  But I have a problem: I have a PCMCIA TV and I could not use it without the pcmcia.sys file...

  So I was wondering if Toshiba will download the new drivers for Windows Vista... This laptop is 'Vista capable' according to Microsoft System requirements...

  Waiting for your help...

  Unfortunately, it seems that the snipe is right.
  Can the hardware specifications of this laptop allows you to install the Vista
  but it seems that Toshiba has decided to publish no Vista drivers for each series laptop.

  In order to check this document:
  http://support.toshiba-tro.de/KB0/TSB7201SK002HR01.htm

  Not seem that your laptop series is not part of the list

• What is max capacity of the HDD on the Satellite M40-101

  What is the maximum capacity of the disc HARD can be installed in the laptop M40-101?

  To my knowledge, some of the Mobile Satellite M40 were shipped with the hard disks of 80 GB (IDE).
  I didn't find any official Toshiba information about supported tough max, but I guess you should be able to use the 100 GB drive HARD; Maybe a 120 GB HARD drive too.

  Seems that you have to test.

  Best regards

• Backlight is disabled until the power management software is loaded on the Satellite M40 - 295

  Greetings to all members of the forum.

  I am owner of ten months a Satellite M40-295. My problem is the following:

  When I start my computer the backlight is disabled until I go into Windows and the power management program is loaded.
  After that the backlight of the screen lights up. I tried to change the brightness with Fn-F6/7 and screens using Fn + F5 without success.

  Init information (init messages, such as the Toshiba and Windows logo) appears on the screen (I checked it under the intense light and the screen from another angle of view), so the adapter seems to work properly.

  Thanks in advance

  Hi Evangelos

  I'm afraid that now, you have a problem. If the unit won't start the BIOS chip is probably damaged. In my opinion BIOS update was bad idea.

  Right now I don't want write something on the screen because now it is not important at all. Please contact the customer Service of your country partner and let check the device. Sorry, but I'm 99.9% that the unit is now completely screwed.

  If the appliance shows any sign of life is the case for the service. :(