What RAM I need to use the Satellite Pro M70-144

Similar Questions

• Of memory can what type of bars I use in Satellite Pro A210-1AZ

  I just bought the satellite pro a210-1az which has 1 GB ram samsung.
  I'm tempted to increase the amount of ram and I think theres 1 free slot, my best plan would be to exactly match the installed module.

  My problem is the determination this exactly.
  I googled the numbers on the module - no luck.

  The label on the statements of the 667 mhz box, but I saw the post 5? MHz.
  I don't want to buy the wrong kind.

  Please take a look here:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=42617&ft=m&St=3

  According to this site, the laptop would support DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM barrettes.

  I think this should help to clarify your question.

  Welcomes the boyfriend

• Is it possible to upgrade the Satellite Pro M70 with a Core 2 Duo CPU?

  I ve got the Toshiba Satellite Pro M70.
  It is with the Intel Centrino 1733 Mhz.
  I want to know if it is possible to update my system with a Core 2 duo.
  STI Centrino (Dothan) 479M CPU base and the core 2 duo is 479 Y.

  Thanks for your replies!
  Sebastian

  Hello

  No, to my knowledge you cannot switch the laptop with Core Duo or Core 2 Duo CPU.
  Laptop Satellite Pro M70 supports a Mobile Intel 915 PM Express chipset and cela only the Intel Pentium M Processors.

• Info satellite A210 171 what do I need before using the recovery disk?

  Hello

  I have 1 recovery disk that came with my equium, have not used before.
  It says on the back of the envelope of recovery disk 'insert the first diskette.

  I guess there should be a second?

  Also this info I need to provide during the installation process? as serial number?
  All I have a black and white sticker that is on the side of the box, it came in, but it was so long ago.

  I'm having a lot of problems with windows install does not and many others.
  Windows updates do not work either and I tried to correct those, but a clean reinstall of the operating system has been recommended.
  Now, at this point nothing will install because windows setup will not work.
  So I think I wil lhave to try a clean install, but I do know that the cd player works.

  I got a great run on this laptop, little slow today for my needs, but all very good product, purchased in 2007.
  With a clean OS and 4 GB of ram that could last for years, cannot afford a new right now.
  I really tried to avoid using a disc of recovery in the past, as I have never had problems until now.

  Thank you

  Post edited by: sounds

  > I have 1 recovery disk that came with my equium, have not used before.
  > On the back of the envelope of recovery disk, it says 'insert the first diskette.
  > I guess there should be a second?

  I m wondering why you get this disc with your laptop, why? Because I do not have the recovery disk, but I had to create one using the Toshiba recovery disc creator software
  But my laptop is more recent that your A210 might be the reason why you have this drive

  I have created a recovery disk and I needed two-disc DVD, I think it depends on the size of the image file

  > Also what information I need to provide during the installation process? as serial number?
  This is not necessary because your system has already been activated.

  But I recommend you backup your personal data, because the recovery disk would format the whole HARD drive and you will lose the files.

  PS: you should read other threads in product recovery forum!

• What RAM modules are compatible with the Satellite A100-590?

  Hello

  I plan to upgrade the memory of my A100-590. At present, there are 2 x 512 Mo of RAM DDR2-533 Samsung inside. The motherboard supports PC2-4200 and PC2-5300.

  If I want to put 2 x 1024 MB DDR2-667. Now, my question is, RAM from other manufacturers such as Corsair, Kingston etc is also compatible with the jury?
  Thanks in advance for your answers!

  GMC

  they * SHOULD * be compatible with this machine, but I won´t dare to say they really are.

  Then it s even better to use the original modules because you can be sure that they are 1000% compatible with your laptop.

  Welcome them

• Need advice on the Satellite Pro M40

  I wonder if someone could advise me. We just bought 8 smart tips for our school with these I ordered 8 portable computers SatProM40. When I ordered them I checked the spec as follows

  Toshiba SatProM40 - Celeron M360 1.4 GHz - RAM 256 MB - HD 40 GB-CD RW/DVD-ROM combo - Mdm - Lan EN - FAST EN - Win XP Pro - 15.4 "TFT.

  I checked before I ordered that the RAM was 256 because I had heard that it is the minimum recommended to switch to XP.

  Laptops take almost 5 minutes to turn on and everything takes an age to work it's really frustrating and they are totally useless for our school because the entire lesson is included with get the computers to run anything.

  I checked the system information and found laptops were running of 192 MB RAM and rang the provider. I was told that they used 64 MB for the graphics card and that's why they had provided a RAM of 256 MB computer.

  My question to someone who can help:-c' is a normal practice. If I had known this I would have ordered a laptop computer with more RAM to compensate.

  He would welcome any advice that would help us get our children working on their new computers. Thank you.

  Hi Lisa

  In my view, Satellite Pro M40 is nice unit for school work, but I agree with you really is 256 MB minimum RAM and I recommend you buy more 256 MB or 512 MB, depending on your budget.

  The compatible RAM modules are:
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)

  Problem is that this device uses shared memory and that means that RAM will be used also for graphic designers. If there is someone who has a good knowledge of PC that they check all running processes. Many of them are unnecessary and can be disabled. I also noticed that preinstalled Antivir asks (Norton) slow OS quickly. If all units are not connected to the internet I recommend you to remove it.
  By the way: there are many applications of good antivir which works well and don't slow down the operating system currently running.

  Good luck!

• Using the Satellite Pro L550-17U in North America

  Hello

  Hope this is the right place. I go to the Canada in a few weeks and I'll bring my laptop with me. My question is how can I know if I need a voltage converter. I asked around a few places and keep getting different answers. I was told that I would need to buy a converter by one person while another said that most laptops have built in converters. Also the frequency in Hertz, there here is different as well. Does that affect anything?

  How can I check if I have a built-in converter?

  My laptop is a satellite Pro L550-17U.

  Thanks in advance.

  As far as I know you don t need this converter. What you probably need is the power adapter. Check on Amazon for your country. There you can order this adapter for the USA or the Canada trip.

• Should what type of Module I use for Satellite Pro A100

  Hello

  I have a Satellite Pro A100 (PSAASE-00G004GR) with + 1 GB of SAMSUNG DDR2 - 533 + already installed (+ 1 GB 2Rx8 PC2-4200 s-444-12-e3 +).

  Now I want to upgrade the memory to 2 GB of RAM, adding an additional 1 GB of RAM, the problem is:

  * In the manual, it says that I have to stick to the following numbers of the module in case of upgrade of RAM which is for 1 GB: PA3411U-1M1G

  In some other sections of the manual, it was mentioned I can use PC2-4200 or PC2-5300 on that laptop, not to mention no module number.

  If {color: #ff0000} + _should I stick with this module number (1 GB PA3411U-1M1G) _ + {color} or simply choose any type PC2-4200 or PC2-5300 RAM available in the market?

  Looking for additional help, THANKS ;)

  Hello

  I recognize that the manual irritates statements. The true, it is that you can install any module market PC4200. So, you can also use the original Toshiba modules that are known to work in this machine.

  Feel free to enter any market module, but I suggest you use kingston or corsair modules to ensure performance and full compatibility.

  Greetings

• How to recover the Satellite Pro M70 using the RIS (starting at LAN)?

  Hello, we are trying to get some 6 M70 of them to build via ris but they keep trapped say Setup is inspecting your hardware.

  We tried the latest maps on the server ris and many different things.
  Bios update laptop computers and update the PXE boot room with no joy.

  What is the answer?

  Thank you
  Richard

  Hello

  At first, I must say that on this forum, you will find some interesting discussions on installation of RIS. Use the RIS services as search terms in the advanced search option and check the results. Regarding the installation of RIS, you can also find some info under http://support.microsoft.com/kb/304992

  A question: have you done your own recovery to the installation image?

• LED flashing - need to know the Satellite Pro 6100 POST error codes

  When I tried to turn on my Satellite Pro 6100 laptop the Green DC in power light turned orange and started to blink.
  It flashes 5 times, then 3 times then repeats.

  I guess that this indicates a failure in the system, but where can I find what means this error code?

  Hello

  You can read the flashing code very easily short flashing means 0 long average 1.
  Then you read the complete code back.

  Finally, the error code must be converted into HEXADECIMAL value and then a technician of the laptop could know what means this value.

  The ASP in your country should provide details of the mentioned error.

  Welcome them

• How to use the Satellite Pro A100 speakers as a hands-free SmartPhone device?

  I have a your Satellite Pro A100 (PSAAC) and a T-Mobile SDA Smartphone. I would use my laptop speakers and microphone to talk to my cell phone hands-free. I use Vista.

  Are you sure that something like this is possible?

• Need to display for Satellite Pro M70 for Windows 2003 drivers

  Hello
  I am a university student and I have a project to present next week. I picked up my laptop and divide the hard drive into 2 partitions. I installed Windows Server 2003 on the 2nd partition. I need to update the display drivers for the windows, I tried to get these drivers for XP but it didn't work.
  I need the VGA drivers, so I can make my presentation. What should I do?

  Thank you
  By Uncle Sam

  You mean that Windows Server 2003?
  This OS has been designed based on the XP and if I m wrong not XP drivers must run on Win Server 2003 operating system.
  Unfortunately, Toshiba didn't release all the drivers for Windows Server 2003 and to be honest I didn t see pilots Win Server 2003 special anywhere in the internet!

  This would confirm my assumption that drivers Win Server 2003 don t exist and XP drivers should be used.

• What do I need to use the database shall begin backup mode to perform the backup?

  Hi all

  I have a primary database to 10g (10.2.0.4) with intelligence on a solaris platform. I need to create a different primary eve for the same database.

  I stopped the recovery based on standby and began copy (copy of the os) the existing files pending at the 2nd backup server. But I didn't keep the (mounted) existing standby database into begin backup mode. Is this right?

  Thank you

  Arun

  For a mounted database backup mode?

  orclz >

  orclz > startup mount

  ORACLE instance started.

  Total System Global Area 788529152 bytes

  Bytes of size 3050600 fixed

  373293976 variable size bytes

  406847488 of database buffers bytes

  Redo buffers 5337088 bytes

  Mounted database.

  orclz >

  orclz > alter database begin backup;

  ALTER database begin backup

  *

  ERROR on line 1:

  ORA-01109: database is not open

  orclz >

• I need BIOS update for Satellite Pro M70 (PSM75E), but only for the BACK

  Hello world

  Help me!! I'm looking for driver for BACK Bios M70. Does not exist, only for windows and my cell phone is dead.
  Bad news, because after 3 minutes, stop!

  So I have only one solution (with the diskette bootable cd).
  So I need the dos version of the Bios

  Thank you

  This version is not available on the official support page so only one chance to get it is to contact Toshiba service nearest and ask for help.
  Sorry, but I don't see another option for traditional BIOS.

• What HARD drive can I install the Satellite Pro 2100?

  I installed a second hand Toshiba 40 GB HDD in my Pro 2100, but he fails to recognize in the BIOS. Any ideas?

  Yes, I have an idea ;)
  Have you checked if the HARD disk is not corrupted?
  I think it's a first step to find out what's wrong.

  If you are sure that the drive is 100% damage not so in my opinion him BIOS is unable to manage the size of the HARD drive. It s just too big size.
  The BIOS supports multiple disk sizes but if HARD drive it too big the BIOS may not be able to recognize the HARD drive.