What screen resolution will be an early 2008 iMac support HDMI Firewire?

Similar Questions

• G70 screen resolution will not change

  HP G70 - 257CL running Windows Vista Home Premium SP2

  Mobile Intel 4 Series Express Chipset Family

  Have this second hand with a broken screen. Until I could get a new screen, I used the HARD drive in another notebook successfully. Now reinstalled in the G70, have everything works fine except the screen resolution.

  Reports adapter Device Manager works correctly. I uninstalled and reinstalled, updated the drivers. But no matter what resolution to choose for the screen, it remains the same.  I've currently set to 1440 X 900, 32-bit color, refresh rate of 60 Hz. But what I get is closer to 800 X 600. And it stays that way, no matter what I put it to.

  To the best of my knowledge, I uninstalled all drivers associated with the other laptop, so there should not be anything interfere. Thanks for any help, that all the world can offer.

  Hi Barnaby,.

  It doesn't sound like an exorcism is necessary. From all I have seen and know the computers that he shouldn't do that. Before you call the Ghostbusters or a priest try connecting an external monitor to see if you have the same problems.

  http://support.HP.com/us-en/document/c01938980

  Thank you

• WIN7 NEW DESKTOP - SCREEN RESOLUTION WILL NOT BE PROGRAMMED IN TRUE COLOR (32 BIT), REQUIRED BY THE E-MAIL PROGRAM

  bought a new ACER, desktop win7 Wal-Mart 2 weeks. My e-mail program & my financial pgm are not good on the monitor. Determined that the screen resolution should be set to True Color (32 bit), 256 not. Reset, click on APPLY and clicked on Yes, I want to change this setting. Programs has worked. Private messaging pgm (JUNO.com). When I reactivated it, I have to go through the whole process again subject parameter True Color 32 bit.

  How can I set this up so that the resolution is still putting in true color?

  It works fine on my Toshiba laptop with win7.

  Tom Finnegan * address email is removed from the privacy *

  bought a new ACER, desktop win7 Wal-Mart 2 weeks. My e-mail program & my financial pgm are not good on the monitor. Determined that the screen resolution should be set to True Color (32 bit), 256 not. Reset, click on APPLY and clicked on Yes, I want to change this setting. Programs has worked. Private messaging pgm (JUNO.com). When I reactivated it, I have to go through the whole process again subject parameter True Color 32 bit.

  How can I set this up so that the resolution is still putting in true color?

  It works fine on my Toshiba laptop with win7.

  Tom Finnegan * address email is removed from the privacy *.

  True color is actually 24-bit.  32-bit is True Color + Alpha channel.
   
  Understand the brand and model of the video card (as a processor nVidia or AMD/ATI - but which model) then get the latest video card driver and install it.

• Early 2008 iMac RAM Upgrade

  Hello

  I have my old iMac bought in early 2008. It works very well and did an amazing job. However as time progressed so also the OS X has progressed on my iMac too. Snow Leopard, I moved to El captain.

  The maximum memory I have is 4 GB of RAM (2 GB * 2 LOCATIONS). But recently, I discovered that there are a lot of buffering going on and I'm sure it's due to lack of RAM. A lot of paging happens I think between the RAM and the HARD drive.

  My question to the readers of this message is:

  Can I go head and buy a Stick 4 GB RAM (DDR2 - 800 Mhz - 4 GB of RAM). What might be the implications of material. Although the chip itself is very expensive, I fear not buy if this will help my iMac to better respond to requests.

  Comments appreciated by all those who have done this kind of upgrade.

  Thanks for reading my message.

  Best wishes

  DeSmet

  Your iMac can actually use up to 6 GB of ram. Buy ram from a friendly seller Mac as OWC http://eshop.macsales.com/

  or critical http://www.crucial.com

  That said even with 6 GB your old iMac can't run your expectations with El Capitan. An older operating system like Mountain Lion might better work in 4 or 6 GB of ram on your machine http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

• How do I reinstall the AHT on my early 2008 iMac

  My 8, 1 imac, early 2008, now has installed, after Leopard and Snow Lepoard Yosemite. AHT will not load with the D option or the nline version, years that I don't have the diskettes original so I don't seem to be able to perform the test. Y at - it somewhere I can download and install AHT of?

  I guess my 2nd Q's that matter? Are there ways better/easier to test the card mother etc?

  Thank you.

  PS. I had to tap my Q 3 times to get to this point. 1 type Q and then connection; 2. type again; 3 Q appears in the summary box so change downwards and tap again below summary (see box).

  You can not download the AHT Apple or the internet.

  To run the AHT you disc #2 originally supplied with your iMac.

  Your best bet is to contact Apple Support and order a replacement set CD.

  Contact Apple for support and service - Apple Support

• Can I switch to macOS Sierra with early 2008 iMac running El Capitan 10.11.6?

  Can I upgrade to macOS Sierra on an iMac in early 2008 running El Capitan 10.11.6?

  Nope

  MacOS Sierra - technical specifications

• Early 2008 IMAC HD

  I just installed a new hybrid of 1 TB (7200 RPM and 8 GB SSD) in my Early 2008 20 "2.66 Ghz IMAC

  I need to format the HD before you try to boot from El Capitan loaded on a USB?   When I hold that get an icon for the USB option, it loads then goes to a gray circle with line

  This could mean the picture on the port USB does not work?

  I also installed 2 module 2 GB of RAM, but I took out and replaced with the old RAM and always get the same result

  * Everything has been bought at OWC.com

  Yes, a new hard drive must be formatted before that you can do something with it.

  Regarding the USB - which is a Setup bootable on it? Doesn't seem to be if you are unable to start it. How do you have this OS out there?

• Transfer of ram on macbook (early 2008) iMac 8.1?

  Hi, is it safe if I transfer 2 ram sticks of a macbook (early 2008) for an Imac 8.1 (core 2 duo)? Or I have to get different ram for imac?

  Also how can I clean the ram because its pretty dusty on one side of it.

  They are not the same memory.

• What screen resolution should I get?

  Hello

  I'm about to buy a new screen to connect to my Macbook Pro 15 "mid-2012. Now, the thing is that my computer supports up to 2650 x 1600, and I would buy a 4 k (3840 x 2160). I'll probably buy a new computer (macbook) in the next 12 months, which takes care of 4 k, so my question is: if I buy a 4 k monitor now, will it still work on my current computer, but with resolution limited to 2856 x 1600 (or 1440), or it will simply not work at all? I.e. I can live with a resolution of 2856 x 1600 (or 1440) to a buy a new model.
  

  
  

  My idea was to purchase the: Samsung U28E590D.

  
  

  I use my computer for my university studies, analysis of stocks and the production of music. No game at all. Would what monitor you recommend with a limited budget?

  
  

  Min. 27 inches,

  Min. 2856 x 1440, but I prefer a 3860 x 2160.

  Latency as little as possible.

  
  

  ANY RECOMENDATIONS?

  
  

  Best regards
  

  Any ideas?

• I have Windows 7 and I would like to know why my screen resolution will not remain when I put it?

  I need to know why there is above all the resolution of my screen jumps in and out?

  Then, I would like to know if anyone can tell me why my monitor

  He died after I turn it on?  Help

  Try:

  • Install the latest Windows 7 drivers for your graphics card;
  • check if your display requires specific drivers and if so install them (some views just use generic plug & play those)
  • check that the video cable is connected properly;
  • check that your graphics card is pressed fully home in its housing and that the necessary extra power cables him arae connected;
  • check that all the fans (CPU, graphics card, case - where they exist) are working and that the air vents are free of dust and debris.

• Early 2008 iMac upgrade to El Capitan

  El Capitan has disappeared from the app store.  How can I upgrade my iMac 2008 start of the Mavericks El Capitan now?  (Apple he will not go to Sierra.)

  Try here:

  https://iTunes.Apple.com/app/OS-x-El-Capitan/id1147835434?MT=12

• CS6 or even limited CC update for early 2008 iMac 20 "

  Can CS6 or same CC work, if even in a limited capacity of animated graphic, on and at the beginning of 2008 20 "iMac 2.66 GHz Intel Core 2 Duo, 4 GB SDRAM, ATI Radeon HD 2600 Pro 256 MB and OS X 10.9.4 operating?

  Requirements for programs of cloud

  -http://www.adobe.com/products/creativecloud/tech-specs.html

• iMac early 2008 fails to boot completely

  Hi all -

  I have an early 2008 iMac 3.06 GHz 24 "model that starts more completely. The system gets to the Apple screen and the progress bar comes in at halfway and there it is. I had replaced the original HARD with a SDD drive and had not had any problems so far. The system has 6 GB of RAM.

  I searched around here and I've tried all of the following conditions:

  -Reset the SMC

  -Reset NVRAM

  -AHT Ran, fast mode and the full analysis - no problems found. After that, the system does boot to the desktop, but after I stop, I was unable to get another successful reboot.

  -Swapped the SDS for the original HARD drive (which was in good working order when removed) and the system stopped booting in the same place on the progress bar

  -Replacement battery PRAM

  -Ran new AHT.

  Now, I remember the computer to reboot once before what is going on started and seeing that the screen was a little fuzzy. It's the me first to suspect the video card - but don't would not AHT reported that? I don't know if the problem I have is a card or a video card. This computer has been completely reliable since I bought it new in 2008 and I was very happy with it. I want to keep around for a little longer if possible.

  Is there something I'm missing here? I have no problem opening the iMac and to make the appropriate surgery according to the needs, but I want to be sure I'm correct operation.

  Thank you!

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• Screen resolution problem. Cannot set above 680 x 480.

  Screen resolution problem

  I have a dell latitude d630 2.5 GHz computer laptop under XP Professional 64-bit operating system.  The screen resolution will not be set above 680 x 480, and when I try to increase the computer stops with a black screen message that don't stay long enough onscreen to read.  Dell advised that they don't or support this machine with the XP operating system and that they have no drivers or other fixes for the problem.  I hope that you will be able to help and thank you.

  Hi dduck11,

  ·         What is the default screen of the laptop resolution?

  You need to update the graphics (video) drivers for the laptop. I see that there are Windows XP drivers available for the same thing. Download and install the updated drivers to see if it helps.

  Drivers & downloads for Latitude D630

• Vista screen resolution?

  Hello world

  How can I change my screen resolution?

  Thank you

  Serdar Baykara salvation,

  Right-click on your desktop and in the menu that appears, click Customize. In the window customize, click the display settings link (to the bottom of the window). When opens the display settings window, move the slider to increase or decrease the screen resolution. Make sure that you do not increase the display resolution more that your monitor will build the case, you may have problems. The screen resolution will change and a box will appear asking you if the resolutin is OK. This box has a timeout. If the resolution is OK, and then click the OK button. If it isn't, then click on no and try another resolution of the screen.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk;  Web: http://xphelpandsupport.mvps.org;  Web: http://vistasupport.mvps.org;  Web: http://www.silversurfer-guide.com