What should I do after having replaced the card mother i - pod?

Similar Questions

• No video after having replaced the graphics card and power supply

  I have a desktop HP Pavilion m9515y PC. The graphics card that came with it (NVidia GeForce 9600 GS, 768 MB) did not suit the minimum specification required by a game that I played. Things in the game has been very slow - I could see a delay of s ~0.5 to move my mouse on the splash screen for the game.

  Today, I bought a new graphics (NVidia Geforce GTX 550Ti, 1 GB) card and a Corsair 700W PSU to replace the 350W one that came with the system.

  From the outset that I messed up something. It's been a while since I opened the box and I thought wrongly that the top panel (with the rubber surface) to come off before the side panel could be deleted. I removed the two screws now the top panel in place and slipped it in the process it disconnect and two thin black wires which I do not know the function. It was attached near the power button and one was attached to the rear of the Panel. The sons have stripped the ends rather than a connector of some sort and I don't know how they connect back or if they are the cause of the problem that I see now.

  In any case, I advanced and removed the old PSU and video card and replace them with the new. Two of them are significantly larger than the components, they replaced, but they managed to adapt with some maneuvers. All cards are well-placed in the PCI slots.

  The power is connected hard disk, DVD drive, the motherboard and the new video card. I'm not aware of any other connections that need to be made to food. There was not much clearance between the power supply and the back of the DVD player, but I was able to get the data and clinging to the DVD of power cables.

  After having done all that, I hooked my monitor DVI cable, plugged in the power cable and turned on the power. When I plug it in, the power button on the top of the tower is illuminated and the power seems to work. However, my monitor indicates that there is no video signal. I tried to put the old return video card, but I don't always have a video signal. Because I can't get a video signal, I can't tell if the PC is start or not.

  Does anyone know the purpose of the wires that were connected to the top of the Tower?

  They would cause they cause this problem if they are not correctly connected?
  Any suggestions for the possible causes of the absence of a signal from a video card?

  I just took the PC to a repair shop and it turns out that the problem was quite simple: I don't have the PCU power cable 4 pins hanging. Everything seems to start fine when we hung out at the shop. Fortunately, the place that I took did not even charge me what as they don't charge co-pays and since it is such a simple fix.

  Now I feel kind of stupid, but I know better next time...

• BlackBerry Storm 9500 Smartphone - phone don't read do not my SIM after having replaced the screen (vodafone PAYG).

  I recently replaced the screen on my Storm 9500, ensuring that the screen I bought was an exact match, paying special attention to the color of the flex cable and all the serial numbers. After turning on at the end of the replacement of the phone work as usual, all the menus and functions are in perfect working condition. The only problem I have is the phone is not reading the sim card there is now a message at the top of the screen that reads "insert sim card". The upper right corner of the screen indicates "SOS". I tried to give the SIM to a clean place and also tried another card sim vodafone with the same result. I thought that maybe the new screen needs to be reconfigured or something. Anyone have any ideas?

  Thank you very much

  Gary...

  Hello

  Tried the biggest pieces of paper and it worked a treat, thank you very much for your advice, it was very appreciated!

  Thank you very much

  Gary

• I can't recover my system (DV6000) using recovery discs after replacing the card mother/HARD drive

  I have a DV6408nr (windows vista Home premium) I had to replace the motherboard and hard drive. When installing the new motherboard (same part No.: 443775-001) and insert the recovery (bought from HP) discs that I have, I received an error message stating that the PC could not be recovered using my disks. The serial numbers on the label service and in my bios do not match. When I entered the serial number of my bios in HPpartsurfer, he said that the system is a DV6449us. I already checked my RAM and HARD drive is brand new/not formatted. I used these recovery discs (manufacturer: 483905-003/483906-003) successfully before on other flags of DV series. Is there a reason why these discs should not work on two motherboards in the same system with these similar specs? What should I do to get my system recovered?

  The number of the motherboard and other show information in the bios of the new Commission?

  The numbers do not match the recovery disks or information is missing in the bios.

  If it's really a mismatch, then you will need to find the good recovery disks or use a Dell installation disk operating system and use the product key from the sticker on the laptop to get activated, and then manually install the drivers.

  If the bios tattoo is damaged or missing information only a used HP Center can then fix the tattoo.

  check your private messages

• How to replace the card mother, processor and memory in my office without having to buy a new code for Win 7 Utimimate detail?

  In January, my original motherboard died and I replaced the jury only with other printed device using all my old components. When I started to the top of the first time I was warned that my version of Win7 is not valid. (I had used since I bought it in August 2010 without any problem) So I bought a new Windows 7 Ultimate full retail Microsoft online to get going again. Now, 3 months later, it's blue, screening and stop randomly. The Board of Directors, the memory and cpu are all about 7 years and I want to update the new and updated components. How can I do this without having to spend another $207 for a new copy of Windows 7?

  When you transfer the license to a new motherboard, reactivate just by phone, as you said that it is a full commercial license:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Replaced the card mother zd8000 and need a hand, help please...

  Hi all

  I just replaced the motherboard on our HP zd8000 (pentium 4 3.0 ghz, 2 GB ram, Win XP) with an opportunity tested but good MB and need help with the following.

  (1) I cannot play DVD movies as the error 'no dvd decoder' present which was not a problem before now?  Where can I get a free decoder that works as Windows displays only paid versions?  We have the drive to dvd with lightscribe. SOLVED! CNET has DECODER.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------

  (2) internal temperature, according to SpeedFan, revolves around 140 degrees with just surfing the Internet.  Is this a normal temperature because I have only one of the three fans running on the laptop?  Is in any case to all the three fans running to be sure there is no problem?  I'm positive, I plugged everything but still once a single fan seems to work?

  (3) I discovered that some of the pins were damaged in the card reader.  I can get the seller to give me a discount, not intend to tear apart just for it, but is there the concerns of short or otherwise?

  (4) our battery arrested charge years ago, these were known as such, but I bought a new one last year and hope that the replacement MB would load it again.  No luck though.  Can I do, update of BIOS etc, in order to make the battery charge?

  (5) whatever it is you people can think for me to test to make sure the new motherboard is working correctly?

  Thank you, Ralph

  PS, It's a replacement card correct according to the serial numbers of MB.  Everything seems to work properly except mentioned.  Our graphics came out on the original MB.

  Some of the sons had grown out of the harness that connected the two other fans.  I double checked and replaced these so now the laptop works quite a bit cooler.

  EVERYTHING IS GOOD TO GO!

• What Linked Clone VM after having deleted the Parent model?

  Hi all

  I deleted the models and all VM related clones still works fine

  Looks like that model files still sitting on the data store.

  It will be really difficult for me to keep track of which is where?

  It will be really useful if we could come up with a report or something to achieve exact file structures

  Thank you

  As long as a VMDK is necessary for all child VM still in Lab Manager (or a child of this VM) it will stay on the drive in its original folder.  You can eliminate some of the records/VMDK by consolidating the configurations that have been cloned from a template.  We do it with most of the configurations captured at the library.  You must be careful if or it will cost you a lot of space if

  In Lab Manager you can see this in a graphical representation on the way to resources, Datatstores and then choose the data store for configuration model / you want to watch.  The mouse on the virtual machine, and then select the context.  Not only that you get a graphical view, but when you hover over each box it tells you the name of the folder and the size of it.  He also tells

  I've been searching in the database to figure out how I can get this information and export it.  I'm only able to track down the parent folder for a current VM inside Lab Manager so far and not the parent of one that no longer exists (but always as a linked clone).

• How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please?

  How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.

  Thank you.

  Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
  You can delete this folder to cancel the download.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version
  • http://KB.mozillazine.org/Software_Update

  Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
  Linux: "/path_to/firefox/updated"
  Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  

• What should I use for a replacement of WinMail in Windows.

  What should I use for a replacement from WinMail in Windows 7 when requires it a number of sites to meet an address or a link that the site offers an answer or a question.  I have msn, yahoo & gmail but lost WinMail when I've upgraded from Vista to Windows7.
  I lost WinMail thur a mistake some time & it was a nighmare tring to meet links on sites that requires to open a format Outlook, Outlook Express or WinMail.

  I have msn (hotmail), yaho & gmail, but none of them will come when I'm trying to respond to the link sites for a response. If one of those that should be used, how it equal in Windows7?

  Windows Update has nothing to do with the upgrade of Windows.

  Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

  You will need to install a (e.g. MS Outlook;) Windows Live Mail; Oiseau-tonnerre) , and then set it as a default for mail in CUSTOM (<>) Set Program Access and defaults of the computer before any function article send to or MailTo will become available.

  You will find support for Win7 e-mail Clients in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

  Support for Windows Live Mail (which will be able to import your data from Windows Mail Backup), you will find in this public newsgroup:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Windows.live.mail.desktop

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• display zip files... what should I do now to see the content of my zip file?

  Sir ihave downloaded songs on the internet that is downloaded as a zip file format... and I have change the path of the zip opening and is open with internet explore form.and, now when I open my file zip my scenn begin to blink heavlyy after that I have to do my computer turn off or restart...

  What should I do now to see the content of my zip file?

  Please help me...

  You must extract the files zip first and then open it with a program that can open that particular file type.  So in this case, even if you use Internet Explorer to download files, you must use Vista to extract to the desktop (downloads or music where ever you choose) by right-clicking on the download, unzip the folder and create a new folder with the decompressed files and then you can use WMP or any program you use to play the songs.  But it does not work because of the changes that you did - but we can fix that easily enough.  It happens quite often with many different programs (ZIP especialliy because a lot of people care less about the ZIP of Vista program and cause problems in trying to change).  I suggest that you pay attention to what we're about to do what it will be probably useful more than once to you later for other types of files (I use it often, but I use it often when I install a new program and do not have default values, he created).  Although the first procedure is for most of the types of special system files and so generally used only for repairs (with the exception of ZIP), the second (if you actually need to use it) works with all other types of files.  I recommend that you create a new folder in the Favorites, called "File Association Changes" and add these links so that they will be easy to find if you need again.

  Here, the first thing we need to do is Zip file association fix it back to Vista of Internet Explorer.  Go to:http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to ZIP and then click or double-click on it to run the program that will reset the association back to its default values.  If you don't like the Vista Zip program, I recommend trying 7 - Zip free but excellent:http://www.7-zip.org/.  If you wish, set as the default zip file by using the following:http://www.mydigitallife.info/2008/06/20/how-to-edit-or-change-file-type-or-extension-associations-default-programs-in-windows-vista/.  If you wish, you can add send to 7 - Zip to the right-click context menu as follows:http://www.vistax64.com/tutorials/67599-send-context-menu.html.

  Once, when you find a zipped song you want, download it to the desktop or wherever you choose and use the 7-Zip program (depending on what you set as the default value) is the Vista to unzip the file, and then save the decompressed everywhere song where please.  You will now be able to play with any player you who manages songs with this type of file (if you click twice on the song, it should open the default program and start playing automatically).  Now you can do what you want with the original zip file you have now the actual file - you can save it if you want (although I don't see why you need to do when you have the actual file) or you can simply remove as needed.

  That's all. The problem should be solved and you must use the program ZIP Vista or 7 - Zip to unzip all zipped files or folders (downloaded or received as attachments to emails, or transferred by a flashdrive or however obtained).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What should I do when I receive the message 'unable to load the flash shockwave.

  What should I do when I receive the message 'unable to load the flash shockwave.

  Hello

   
  1. how many times you get this error message? This problem is limited to specific Web pages?

  2. Once you get this error message? What is your default browser?

  
  Find out what version of Internet Explorer you are using
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using
  
  3. have you installed new hardware or software before the show?

  4. What is the operating system installed on the computer?

   
  5. are you logged in as administrator?
   
  
  Method 1:
  If you are facing problems with Internet Explorer 9, I suggest you read the article and try to run theFix it:
  Troubleshoot Internet Explorer to IE quick, safe and stable
  http://support.Microsoft.com/GP/pc_ie_start
  Note: Note that the reset Internet Explorer (IE) resets all settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.
   
  Method 2:
   
  a. search for Internet Explorer in the start menu.
   
  b. right click and select "Run as Administrator".
   
  Check if the problem occurs.
   
   
  Method 3: Uninstall and reinstall Adobe Shockwave
   
  To uninstall a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  
  I also suggest you to download and install the latest version of Adobe Shockwave player and check if that helps:
  
  http://get.Adobe.com/Shockwave/
  Provide more information about the issue so that we can better help you.
   
  I hope this helps.

• Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available

  Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available.

  If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER. Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided. If you want a report on a partition or one drive other than C, you need to go to this partition. To access F, where F is the required partition you type F: and press the ENTER key.

  Copies of the reports from a command prompt can be tricky. Right click and select mark. This allows to highlight the selected text, and then click on copy. You will then open Word, Notepad or similar file, right click and paste. The selected text transfers your Clipboard to open the file. You can paste directly into a response message to the majority of the forums.

  In Windows 7, you can use a command-line high;
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

• How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

  How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

  You can not.  You must check 'install' to install and run it.

• What happens after that reset the card (from the point of view JCRE)?

  Hello
  
  In the windows environment, to maintain the State of application, I cam imagine that data is serialized and saved in a text file. The second call of app, the data in the text file are reloaded to reconstruct objects and form the latest state of the application.
  
  In the middle of the map, suppose I have a few cmdlets on the map. Reset of the card, I think the boot trap method is invoked and reload the data for each applet to keep state.
  
  The point is, to load data, everything is done in native code, but objects to be re-inited run java layer. Is this feasible? Or JCRE will initialize the applets in java layer?
  
  Could you correct my understanding and share your knowledge on something else after reset of the card? Or after reset of the card, JCRE does nothing, objects inherit from its reference, the class structure of the map features?
  
  Thank you
  
  Mike

  They are delivered to the default value for this type (0 or false).

  See you soon,.
  Shane

• After some time, my screen goes black have to re boot. It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr

  After some time, my monitor goes black have to re start at 5 min to 2 h said mge device is grapish until this day.   It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr XP HP pc 1.3 gh 512 ram 120g hd

  Assuming that the integrated graphics controller is OK, try the following:

  Launch a command (as a Runas administrator) window and enter the following commands in it:

  powercfg-h off

  powercfg/change-standby-timeout-ac 1440

  The first command turns off "Feature of putting into hibernation"

  The second command replaces the timeout stansby 24 hours when the system is connected to AC power.

  (The number is in minutes).

  Good luck.