What should I do when I can not enter a password when you try to connect to a wifi network

Similar Questions

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• Error when you try to connect to a shared network drive by car on the portable XP from VISTA desktop: "not enough server storage is available to process this command."

  Hello
  I was able to connect ok in a shared folder on my laptop VISTA from my XP desktop computer.
  but when I try the other way around (to connect to a shared drive on my desktop XP FROM my VISTA laptop), I get the following error message:

  "The mapped network drive could not be created because the following error occurred: not enough server storage is available to process this command."

  Desktop is HP Pavilion a1410n
  Windows XP SP3 Home Professional 3 GB RAM
  Laptop is HP dv5z
  Windows Vista Edition Home Premium SP2 4 GB RAM

  I would like suggestions.
  Thank you very much.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Steve,

  Thanks a lot for the link to this article.
  It was most helpful.

  I also found this forum useful post:
  http://www.techsupportforum.com/Networking-Forum/networking-support/114373-cant-map-new-network-drive.html

  In particular, he said to check the event log of the computer that you are trying to connect to (the remote computer) to search for an event ID 2011, which would be entered in the time you finally tried to connect and does not.
  I did alt-click on the icon MY COMPUTER (from the remote computer) and the menu HANDLE, click the EVENT VIEWER folder (in the left pane), and then the SYSTEM folder under that.
  On the right pane, I found an ad for the event ID 2011 at the time wherever I finally tried to connect.

  To test this, I went to the VISTA laptop and tried to connect the computer to Office XP again, which gives a different error message on the VISTA laptop.
  When I went back on the XP desktop I tried to connect to and looked again to the event log, of course ANOTHER event ID 2011 has been registered with the new time of my additional attempt to connect.

  He confirmed that it was likely that the IRPStackSize was the problem, as your proposed article.

  Then I printed article how DO TO SAVE AND RESTORE the REGISTER to: http://support.microsoft.com/kb/322756/
  then backed up the registry (both by running a restore system to register and by exporting from the top level of the regedit).

  I then went in regedit on the desktop in XP for the
  HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\LANMANSERVER\Parameters file described in your article.
  There was NOT an entry for IRPStackSize in the right pane, so I followed the instructions in the add - it and change it to decimal 15.
  I rebooted and tried to connect but still got the same error.
  The article said that the default value is 15, so I assumed that adding input IRPStackSize to 15 has not changed anything.

  So I went into regedit and changed the value of IRPStackSize of 15 to 18, restarted and it solved the problem.

  I found that the following articles is also useful in the resolution of this problem (aside from the one you gave):

  http://support.Microsoft.com/kb/285089

  http://www.smartcomputing.com/editorial/article.asp?article=articles/archive/r0803/10r03/10r03.asp

  I typed this all this while this might help others who may encounter this same
  Error "not enough server storage is available to process this command" when you try to
  Map a network drive (or just try to connect) to a XP computer from another computer.

  Thanks much for the lead.

• When you try to connect to a wireless network I get this error: "If you want Windows to configure this connection, start the Wireless Zero Configuration service.

  original title: WiFi

  I want to connect to a wireless network on my laptop. When I go to the page of networks wirelss under the "choose a wireless network" it says "Windows cannot configure this wireless connection. If you want Windows to configure this connection, start the automatic Wireless Configuration service. My other laptop does not, and I don't know how to make the wireless network options appear. Any help is appreciated!

  Hi AshleyHenley,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  See the article and run the Fixit tool available, check if it helps.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• Error 691 keeps that appear when you try to connect to the vpn network. Help!

  Login details are correct.

  WiFi works fine.
  Thanks in advance.

  Hi Karen,.

   

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps.

• When you try to connect to my computer. several letters on my keyboard do not respond. I'll send this question to another keyboard. Can you advise?

  When you try to connect to my computer, a lot of letters on my keyboard do not preint

  Then you almost certainly have a bad keyboard. Letters of a keyboard are arranged in a grid electrically speaking which does not quite match the physical layout of the keyboard. When a group of stop working, this normally means a contact online or column failed.

• What format to use when you try to download videos on instagram or even try to send an e-mail

  What format to use when you try to download videos on instagram or even try to email them

  Hi Rashad,

  What format to use when you try to download videos on instagram or even try to email them

  This info is not easy to find on the site Instagram. Seems like Instagram want video to be uploaded from your phone. I guess that means he expects H.264 video. Please try it first and see if it works.

  Thank you

  Kevin

• What does mean U44M1P7 when you try to update illustrator?

  What does mean U44M1P7 when you try to update illustrator?

  "Installation failed" error U44M1P7 with Adobe Creative Cloud or updates of Adobe Creative Suite 6

  Mylenium

• When you try to connect to internet it sometimes makes other times it doesn't.

  Sporadic internet connection

  My friend has a very annoying problem with the PC! When you try to connect to internet it sometimes makes other times it doesn't.
  The desktop pc is connected to the router/modem (D-Link WIFI ADSL 2 + G6242) via the ethernet cable, it communicates with the router, but
  not between the router and the net!
  I can connect without problems with laptop wireless, which indicates that the problem is with the Office
  and not the router!
  I suspect that the Office might be infected with malicious software. I've updated all the thing and run Malwarebytes, Spybot
  Search and destroy and Avast AV, nothing malicious is reported.
  I have restored to previous restore points, but the problem persists. It may be a corrupt file but which!
  I would have preferred to resolve this problem, otherwise I'll have to do a restore of the system Dell Factory!
  I'd love to help with this problem appreciate.

  Specifications of the PC;
  PC is connected to the router/modem (D-Link WIFI ADSL 2 + G624T)
  REB PC
  Computer:
  Computer Type ACPI (Mobile) 86 x PC
  Operating system Microsoft Windows Vista Home Premium 6.0.6002 (Vista RTM)
  Date: 2010-04-26
  Time 16:19
   
  OS Service Pack Service Pack 2
  Internet Explorer 8.0.6001.18904
  DirectX DirectX 11.0
  Motherboard:
  CPU type DualCore AMD Athlon 64 X 2, 2600 MHz (13 x 200) 5000 +.
  Card mother name Dell Inspiron 531
  Motherboard chipset nVIDIA nForce 6100-4xx, AMD Hammer
  Memory 2048 MB (DDR2 - 667 DDR2 SDRAM) system
  DIMM3: Hynix HYMP112U64CP8-Y5 1 GB DDR2-667 DDR2 SDRAM
  DIMM4: Hynix HYMP112U64CP8-Y5 1 GB DDR2-667 DDR2 SDRAM
  Type of Award BIOS (09/11/07)
    
  Display:
  NVIDIA GeForce 8300 GS (128 MB) video card
  NVIDIA GeForce 8300 GS (128 MB) video card
  Accelerator 3D nVIDIA GeForce 8300 GS
  Monitor Dell E207WFP (digital) [20 "LCD] (YM30682B6CFL)
    
  Multimedia:
  Audio adapter Realtek ALC888/1200 @ nVIDIA nForce 6100-400/405/420/430 (MCP61) - High Definition Audio Controller
    
  Storage:
  IDE controller NVIDIA MCP61 Serial ATA Controller
  IDE controller Standard dual channel PCI IDE Controller
  Storage controller Microsoft iSCSI Initiator
  Hard drive WDC WD50 00AAKS-75YGA SCSI Disk Device (465 GB)
  PBDS DVD +-RW DH - 16W1S SCSI CdRom Device optical drive

  Network:
  Main IP 192.168.1.2
  Primary MAC address
  Network card NVIDIA nForce Networking Controller)
    
   
  DMI:
  DMI BIOS vendor Dell Inc.
  DMI BIOS Version 1.0.7
  DMI system manufacturer Dell Inc.
  DMI system product Inspiron 531
  The system DMI 00 version
  DMI system number 5NNFJ3J
  DMI system UUID 44454C4C-4E00104E-8046B5C0-4F4A334A
  DMI Motherboard manufacturer Dell Inc.
  DMI Motherboard product 0RY206
  [NVIDIA nForce Networking Controller]
    
  Properties of the network adapter:
  Network card NVIDIA nForce Networking Controller
  Interface Type Ethernet
  Hardware address
  Connection connection to the Local network name
  100 Mbps connection
  MTU 1500 bytes
  DHCP lease obtained 26/04/2010 16:01:26
  DHCP lease expires 26/04/2010 17:01:26
  Bytes received 3931673 (3.7 MB)
  Bytes sent 279120 (272.6 KB)
    
  Network adapter addresses:
  IP / subnet mask
  Entry door
  DHCP
  DNS
    
  Manufacturer of the network adapter:
  Company name NVIDIA Corporation
  Product information http://www.nvidia.com/page/mobo.html 
  Download driver http://www.nvidia.com/content/drivers/drivers.asp 
  Update drivers http://driveragent.com?ref=59

  That's what shows in ipconfig/all, when it does not connect to the internet.
  Although I can connect with laptop computer when this happens on the desktop!

  Microsoft Windows [Version 6.0.6002]

  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\>ipconfig/all

  Windows IP configuration

  Name of the host...:-PC
    
  Primary Dns suffix...:
    
  Node... type: hybrid
    
  Active... IP routing: No.
    
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
    
  ... Description: NVIDIA nForce Networking Controller
    
  Physical address.... : (I have hidden for security)
  DHCP active...: Yes
    
  Autoconfiguration enabled...: Yes
    
  Autoconfiguration IPv4 address. . : 169.254.163.97 (Preferred)
    
  ... Subnet mask: 255.255.0.0.
    
  ... Default gateway. : 0.0.0.0.
    
  NetBIOS over TCP/IP...: enabled

  C:\Users\ >

  Of course, it does not show what it should show such as;

  Lease obtained...:
  Expiry of the lease...:
  ... Default gateway. :
  DHCP server...:
  I tried to reset with the following commands unsuccessfully;

  Start, all Programs\Accessories and right click on command prompt, select "run as administrator" to open a command prompt.

  In the command prompt window, type the following commands, each followed by the Enter key:

  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log

  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log

  Reboot the computer.

  Microsoft Windows [Version 6.0.6002]

  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Stebex>ipconfig/all

  Windows IP configuration

  Name of the host...: Stebex-PC
    
  Primary Dns suffix...:
    
  Node... type: hybrid
    
  Active... IP routing: No.
    
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
    
  ... Description: NVIDIA nForce Networking Controller
    
  Physical address.... : 00-1A-A0-80-67-76
    
  DHCP active...: Yes
    
  Autoconfiguration enabled...: Yes
    
  Autoconfiguration IPv4 address. . : 169.254.163.97 (Preferred)
    
  ... Subnet mask: 255.255.0.0.
    
  ... Default gateway. : 0.0.0.0.
    
  NetBIOS over TCP/IP...: enabled

  C:\Users\ >
  Would appreciate help please!

  Problem solved by a relocation complete!

• error when you try to connect to the internet via a modem usb - 6 error: the handle is invalid

  error 6: the handle is invalid - I see this error message when you try to connect to internet via usb modem

  I'm using windows Vista Home Basic and attempts to connect to the internet via a usb Huawei modem.

  but when connect this device on windows xp pro his works very well.

  but with vista I see this error msg

  The handle is invalid

  any idea to solve this problem?
  Thank you

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldat least make the modem and everything you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Try to uninstall and then reinstall the modem again.  Remove the modem through Control Panel > phones and Modems, then uninstall the modem in Device Manager. Once the reboot is complete and it is reinstalled it should work (as long as you use the update of the above paragraph).  Make sure that you uninstall in this order.

  Are you sure that the modem is compatible with Vista and the rest of your system?  What is the manufacturer, brand and model?  You can find here:http://www.microsoft.com/windows/compatibility/windows-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you try to connect to my router using the IP address, he continues to ask for a password of windows security.

  When you try to connect to my router using the IP address, he continues to ask for a password of windows security.  I don't know what it is, I tried recording with every combination I can think.  Can anyone help?

  If you do not know the password of the router, then chances are good that you will need to reset it to the factory settings. Google your model and you should be able to find the instructions.

  I hope this helps.

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• ieframe error when you try to connect to yahoo canasta.

  Original title: error ieframe

  Tuesday night, I played canasta to yahoo.  I was not able to connect and play since then.  I get the following error... Please help!       RES://ieframe.dll/acr_error.htm#Yahoo.com, http://games.yahoo.com/games/login2?page=ca&ss=1

  I went to the microsoft website.  I had already cleared cache etc. etc.  I have RESET Internet explore and that got rid of the ieframe error.  Then, I was able to get into yahoo but could not go to a room.  Then, I uninstalled java and reinstalled.  I was then able to go to a room but not to make a table.  I checked the "add ons" and made sure to activate all the java.  I am now able to play canasta to yahoo.  I think that yahoo reset things because others spoke it as and when you try to connect... the screen where you must copy the letters and numbers you see... the page is HUGE and I have to zoom to 75% to get to the screen where I have to watch.  Even this screen I had to make smaller... so I have a few questions to understand.  Thank you for having responded so.

  Hello

  1. do you use the Internet Explorer browser to connect to the mentioned Web site?

  2. If so, what is the version of Internet Explorer?

  3. can you play a different game on the website or other sites?

   

  Method 1: Follow the link below:
  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246

   

  Method 2: please follow the link below:

  Internet Explorer is slow? 5 things to try:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

• BlackBerry smartphones, I get an error when you try to connect to my world because of the r...

  I get an error when you try to connect to my world because of verizon replacement phones

  Hello!

  Your request should be sent as follows. Go to this address:

  • https://www.BlackBerry.com/CSOHelp/index.do?ft=generic

  and complete the form. Use, in the "Please select a component:"on the ground, AppWorld billing/payment selection. " Any other setting routera simply anonymously you on these public forums. Don't forget to also include the reason why you have exceeded your maximum eligible PIN associations to AppWorld (for example, several RMA, warranty replacement, etc..). If you do not have an "order number" for that field, just use whatever it is (for example, '123456').

  If the shape responds by telling you that your PIN is not valid, please report this fact back here also there is a path separate resolution for this problem.

  If this does not work, then please come back on these forums (http://supportforums.blackberry.com/rim/) and create an account so that we can provide direct assistance.

  See you soon!

• When you try to connect to a Yahoo link, like yahoo mail, I get (error code: ssl_error_bad_cert_domain)

  This connection is Untrusted

  You asked Firefox to connect safely to we - mg5.mail.yahoo.com, but we cannot confirm that your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.

  You use a bookmark to open this link?

  If you then try to open the page https://mail.yahoo.com/ instead and, possibly, change the URL of the bookmark to delete the foreground we mg5

  It is generally not a good idea to bookmark the pages directly as long as such links to specific areas can become valid.