What should I use the incremental update for IKM Oracle?

Similar Questions

• Using the media update for windows 7 (from vista), can I now re - install 7 via the clean install option, even if it is the path I have chosen when first installing 7 first?

  With a 7 upgrade version (not the full version) I could not use the upgrade option to install 7 on Vista, because it asked me to uninstall 2 programs that would not work in 7 with installation before you begin.  I couldn't do it because my Windows Installer is missing on my computer. (In fact, I couldn't even run the Windows Upgrade Advisor before proceeding with the installation because this program must be installed on your computer before you can run) So, I chose to use the custom installation and it worked fine, except that my computer is now worse than with vista. Thinking that it was because he kept all the vista files (windows.old) I deleted this file, but he did that give back me my hard drive space. I would like to make a re-install using this same version upgrade disc, but I've heard that I can not do a clean install, if the original operating system is not currently on the computer (using the version upgrade 7, not the full version), and I guess that's is more on my computer with the exception of fragments which I affect 7 performance. If this is true, what should I do? If I have to go to the full version, is there a way I can just pay the difference between what I already bought and version complete, or will lose money that I spent on the upgrade version, and buy the full version outright? Bottom line is this:  I want to just Vista on my computer for GOOD!  I don't want something that looks even left of Vista on my computer. I'm sacrificing all my programs to do it with a clean install, but it's better than all the headaches, I got Vista! Thanks in advance for all you can give me advice.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• Production signed PDF files without using the incremental updates

  Hello

  I know that it is possible to sign existing PDF files by adding new objects (such as the dictionary of the Signature) and gradually change catalogue, Pages objects etc accordingly. But what about programs produce the PDF file? I mean, they must also implement signature by adding a few items after the trailer and using incremantal update or they produce objects related to the signature inside the document directly and don't use incremental updates? Is there a difference? Is implemented with the help of incremental updates easier?

  This is a design decision of the software according to their needs and requirements surrounding the signing process.

• Can I use the full Version of Windows 7 that I would use the edition update for Windows XP?

  Can I use the full Version of Windows 7 to upgrade Windows XP with a custom installation, as I would with Windows 7 Upgrade Edition if I want? (If I decided that I would rather clean the entire hard drive so I can use the full Version of Windows 7 without the need of Windows XP or Vista)

  Hello

  To upgrade your Windows XP computer to Windows 7, you will need to select custom during installation of Windows 7. A custom installation keeps your programs, files or settings. It is sometimes called a 'clean' for this reason installation.

  Reference:

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/is-is/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

• What should I use for a replacement of WinMail in Windows.

  What should I use for a replacement from WinMail in Windows 7 when requires it a number of sites to meet an address or a link that the site offers an answer or a question.  I have msn, yahoo & gmail but lost WinMail when I've upgraded from Vista to Windows7.
  I lost WinMail thur a mistake some time & it was a nighmare tring to meet links on sites that requires to open a format Outlook, Outlook Express or WinMail.

  I have msn (hotmail), yaho & gmail, but none of them will come when I'm trying to respond to the link sites for a response. If one of those that should be used, how it equal in Windows7?

  Windows Update has nothing to do with the upgrade of Windows.

  Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

  You will need to install a (e.g. MS Outlook;) Windows Live Mail; Oiseau-tonnerre) , and then set it as a default for mail in CUSTOM (<>) Set Program Access and defaults of the computer before any function article send to or MailTo will become available.

  You will find support for Win7 e-mail Clients in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

  Support for Windows Live Mail (which will be able to import your data from Windows Mail Backup), you will find in this public newsgroup:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Windows.live.mail.desktop

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• I keep getting these messages that do not allow to use a file. What should I change to have privileges for all functions?

  Original title: administrator Win7

  I have win7 and IE11 running on a HP 8540p.  I'm the only person authorized to use the laptop - I am the administrator.

  I keep getting these messages that do not allow to use a file.  What should I change to have privileges for all functions?

  The second file is not cooperating and was not deleted.

  "Not cooperating" can mean many different things. A real verbatim error message would be more useful. In the case of locked files, it is often possible to remove safe mode.

• I wan to save my history Web sites, but my computer does not record. I go to tools &gt; options &gt; privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it do

  I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it doesn't.

  Thank you for taking the time to help me!

• What is the next update for iOS 9?

  What is the next update for iOS 9?

  Whenever Apple releases

  9.3 iOS

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• I try to use windows excel for windows vista and am asked for a product key. How can I find out what order to use the product?

  I try to use windows excel for windows vista and asks me to enter a product key. I am the sole owner of the computer but have no installation CD for recharge Excel. How can I find out what order to use the product? From now the product doesn't let me do anything. Help, please!

  Hello

  Did you pay for Office (including Excel) in a packaging separated when you bought your computer?

  Office is not included with your purchase of computer for free.

  Most new computers come with a trial version of Office that lets 'x' number of days usuage.

  After this test times out, you will have to buy Office.

  And the product key on the computer case or laptop for the operating system, not for the desktop Suite.

  Here is the link for the Microsoft Store to Office products:

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Office_Category_Page?ICID=Home_4up_1_OfficeCatPage

  And you might be interested in the free Open Office Suite of Office Applications.

  http://www.OpenOffice.org/

  For any other question about Office, please repost in the Office Forums:

  http://answers.Microsoft.com/en-us/Office

  See you soon.

• difference between the incremental update of the IKM oracle and incremental update IKM oracle (PL - SQL)

  Hello

  What is the difference between the incremental update of the IKM oracle and updated incremental IKM oracle (PL - SQL) and incremental update IKM oracle (line by line).

  Thank you

  Papai

  The only difference is that the second using plsql for incremental update. He also to manage clob issues well enough.

  If you need to know more you can read the description of each KM section.

  Incremental update IKM Oracle (PL-SQL)

  -------

  Description:

  -Knowledge integration module

  -Integrates data into an Oracle table from target in incremental update mode using PL/SQL.

  -Non-existent rows are inserted. already existing lines are updated.

  -Data can be controlled. Data invalid are isolated in the error Table and can be recycled.

  -This KM uses PL/SQL to perform the inserts and updates until and blob columns are supported. Please see the restrictions.

  -When you use this module with a source table logged, it is possible to synchronize the deletions.

  Restrictions:

  -When working with the logged data, if the "synchronize destruction of the newspaper" are executed, the lines deleted on the target are engaged

  -The data are updated even if not changed (upgrade from any (e)

  -The number of lines (number of inserts/changes) is not available because the transactions are performed using PL/SQL

  -Comparison of the data is performed using the key to update defined in the interface. It must be set.

  -L'option TRUNCATE does not work if the target table is referenced by another table (foreign key)

  -Options FLOW_CONTROL, and STATIC_CONTROL call the Module knowledge check to isolate invalid data (if no CKM is defined, an error occurs). These two options should be set to NO in the case where an integration Interface meets a TEMPORARY target data store.

  -L' FLOW_TABLE_OPTION option is set by default to NOLOGGING. Set it to a space if the interface is running on an Oracle 7 database

  -Deletions are committed regardless of the VALIDATION option

  Incremental update of the IKM Oracle

  -------------

  DESCRIPTION:

  -Integrates data into an Oracle table from target in incremental update mode.

  -Non-existent rows are inserted. already existing lines are updated.

  -Data can be controlled. Data invalid are isolated in the error Table and can be recycled.

  -When you use this module with a source table logged, it is possible to synchronize the deletions.

  REQUIREMENTS:

  -The update key defined in the interface is required.

  RESTRICTIONS:

  -When working with the logged data, if the "synchronize destruction of the newspaper" are executed, the lines deleted on the target are engaged

  -L'option TRUNCATE does not work if the target table is referenced by another table (foreign key)

  -Options FLOW_CONTROL, and STATIC_CONTROL call the Module knowledge check to isolate invalid data (if no CKM is defined, an error occurs).

  These two options should be set to NO in the case where an integration Interface meets a TEMPORARY target data store.

  -L' FLOW_TABLE_OPTION option is set by default to NOLOGGING. Set it to a space if the interface is running on an Oracle 7 database

  -Deletions are committed regardless of the VALIDATION option

  -L' ANALYZE_TARGET option will allow to assess correct statistics only if the VALIDATION is set to Yes. Otherwise, the IKM gather statistics based on old data.

  -Default UPDATE option is TRUE, which means by default it is assumed that there is at least one column nonkey specified in a target data store.

• Windows XP svchost.exe problems. Cannot find the latest updates for windows xp.

  Hello, this is my first time on the Microsoft Community page.

  I have a very strange problem with automatic updates svchost.exe and windows. I know that automatic update of windows, has been known to cause problems on XP and there is thus CPU utilization of memory leaks. Last night, I tried to install the latest windows XP updates, with automatic tool. The tool hanged during the process. Not sure why exactly. I never had a problem with it. I've been running Xp SP 3 for more than five years. In any case, I rebooted my system and checked to see if the updates actually treatment. They do not have. Then I went to the windowsupdate.microsoft site. I was trying to these updates. The scan never completed, he just constantly checked, for about 45 minutes. I decided to do some research. I found the C:\Windows\SoftwareDistribution folder "fix" online. He kicked, I renamed the file. And then disabled auto updates and restarted my computer. After windows starts, I re-activated automatic updates and waited. Nothing happened, so I did some research more. I noticed that svchost.exe uses about 25% the use of the processor. Normally my treated systemidle is 99%. I used Process explore and isolated the wuauclt.exe under the svchost.exe file. When I disable automatic updates executable, it is up to a full 99%.

  I'm not sure why it uses 25%, when I look at the actual use of the memory for the wuauclt.exe, it is only using about 17 k of memory. Which is quite low. I have not turned on microsoft update, starting in the configurations of parameters at windowsupdate. I know that in the past, that has been a problem and swallowed up system resources.

  Any advice would be helpful. Thank you in advance.

  There are a lot of threads on this forum - and many others - this problem - just try to do a Google search for UPDATES of XP SVCHOST - hits now more than 8 million.

  But to save you the trouble of tracking down the fix OK here is the short version

  1. disable automatic updates using Control Panel icon

  2. restart the computer - SVCHOST is now not going crazy

  3. check which version of Internet Explorer you have installed IE8, IE7 or IE6

  4. download and install - the links below - the good update for Internet Explorer.

  Assuming you have Windows XP 32 bits here are the direct download links:

  IE8: IE8-WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41404

  IE7: IE7-WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41442

  IE6: WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41458

  5. Once installed, you can reactivate the automatic updates and using Windows Update.

  Note: The bug also affects access via Windows/Microsoft Update Web site.

  KB2898785 is the "Cumulative Security Update for Internet Explorer" (December 10, 2013)

  There is a bug in the function of automatic update under XP running the SVCHOST process at full CPU load (100% or 50% or 25% depending on the number of CPU cores you have). If you have a Quad core CPU the bug works the CPU at 25% (a carrot out of four) and eventually battles through a conclusion - but if your computer is a single old Celeron or Pentium bug works the CPU chip at 100% load for many, many h/solid.

  Faster your processor and RAM than you seem to make a radical difference to the actual times are waiting for you maybe search for updates complete. Most of the old core systems were never designed to deal with this kind of situation and can easily overheat. This is especially true of laptops and desktop systems older where the radiator can be partially blocked with fluff and hairs of animals - which could cause blockages or stops!

  Microsoft said last month that the updates of Internet Explorer are treated differently from all the other updates - which is originally the XP update engine run so slowly as to appear frozen. If the update service finds that you don't have the latest version of IE that is currently available, it starts to search the entire tree of updates of IE to see what it takes - rather than offering just the cumulative current update for your system.

  But if you manually install the update yourself update Internet Explorer service is fully updated and is not search for updates of IE. But until Ms. fix it will still occur whenever a new update is published.

  MS said that intend to prune the IE updates database so that only the main cumulative updates have been offered when a search has been launched - it did not in time for the update as it should of November and obviously has not arrived or worked either in time for the December Update!

  MS say they hope to have a fix before the January updates are released (Patch Tuesday) - that the problem will be activated once the next update Cumulative of IE is released.

• Load with the incremental update of the IKM Oracle

  Hi Experts,

  According to my understanding, incremental load is that the new data (with insert append or load incremental (update/insert or merged with or without behavior SCD)).

  While peek into the code of the IKM KM here it is my understanding:

  Incremental update: given the PK defined in the target data store, that KM will check line by line and put insert/update (change data capture).

  Append: Blindly block for the table insertion target and any changed data will be captured. It will not truncate and insert so that to avoid duplicates in the data, have a PK defined in the target table, so whenever the duplicate data comes it can be prevented or go for CKMs.

  
  

  Now my doubt is,

  
  

  When you use the incremental km update: the scenario is I have an incremental load today, inserted for example 200000 files today and tomorrow other 200000 records added (may include updates of certain lines in the previous loaded 2,00,000 documents. Now it will scan 4,00,000 (yesterday + today) and seek changes, I mean to update or insert

  Because according to my understanding will treat this KM row by row all records (my understanding is correct?). If it reads each record and are looking for a change or not change it seems to me that his time and performance issues?  CDC is right approach in this scenario or the implementation of SDC on all columns in the table?

  
  

  Regarding the large number of records coming daily, updated incremental if IKM checking all records for update or insert or no change, in my opinion, this isn't a performance wise and time to compare source and target value. This KM eliminate comparing itself the Chronogram of the source to target those who does not charge any change in any of the previous column value?

  
  

  
  Sorry if this is a silly question. Just trying to figure which can be better charge strategy, especially when I have millions of records entering source daily.

  
  

  SSX I remember ealier JeromeFr our expert member in the community, said Partioned Exchange to treat only to process the given month data when you manage tables partitioned at the database level.
  

  
  

  Best regards

  ASP.
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  Hi ASP_007,

  Charge, as opposed to full reload, does indeed only new (and possibly changed) data. There are 3 main ways to do this:

  • Set up a filter in your mapping interface/load only the data including the upper date to a variable (which holds the last loading date).
  • Use the framework of the CDC in ODI. There are several JKMs. The solution optimal is probably the Golden Gate, one, but you must purchase this additional license. mRainey wrote about this several times: http://www.rittmanmead.com/2014/05/goldengate-odi-perfect-match-12c-1/
  • Retrieve all the data in the source and allow an incremental update of the IKM define what already exists.

  Of course, the first two still will take a little more time to develop, but it will be much faster in terms of performance because you treat data less.

  It is for the part "Extract", get data from the source.

  Now, you must know how to "integrate" into your target. There are different strategies as insert Append, incremental update, Type 2 SCD...

  • Indeed insert Append won't update. It will only insert lines. It is a good approach for a full charge, or for an additional charge when you want to insert data. There is an option in most of the IKMs Append (control) to truncate the table before inserting (or delete all the lines if you do not have the privileges to truncate).
  • Incremental update: there are different IKMs for this and some may have better performance than others depending on your environment. I recommend you to try a few and see which is more fast for you. For example ' IKM Oracle incremental update (MERGE) "could be faster than 'IKM Oracle incremental update. I personally often use a slightly modified version of ' IKM Oracle incremental update (MERGE) for Exadata ' to avoid using a work table (I$ _) and perform the merge directly into the target table. The last approach works well with the CDC when you know that all data are new or changed and needs to be treated.
  • SCD2: To maintain your dimensions needing SCD2 behavior.

  So in answer to your questions:

  Because according to my understanding will treat this KM row by row all records (my understanding is correct?). If it reads each record and are looking for a change or not change it seems to me that his time and performance issues?

  Some of the IKMs will do it line by line, others will do it based on a game. This is why it is important to check what he does and he spots.

  CDC is right approach in this scenario or the implementation of SDC on all columns in the table?

  Yes certainly, you will have less data to be processed.

  Regarding the large number of records coming daily, updated incremental if IKM checking all records for update or insert or no change, in my opinion, this isn't a performance wise and time to compare source and target value. This KM eliminate comparing itself the Chronogram of the source to target those who does not charge any change in any of the previous column value?

  Yes, by using ' IKM Oracle incremental update (MERGE) for Exadata ' with the strategy of 'NONE '. This means that he will not try to see the rows from the source is already in the target.

  PS; I am remember ealier JeromeFr our expert member in the community, said Partioned Exchange to treat only to process the given month data when you manage tables partitioned at the database level.

  It is a good approach when you want to reload an entire partition (if you have a monthly charge in a monthly partition or a daily load in a daily score for example). It is easier to set up to load the new lines only. But if you need to update things in the source, you can use incremental update strategy on an intermediate table that contains the same data that your partition and then create the swap partition in a further step.

  Thanks for the mention.

  Be sure to close your other discussions.

  It will be useful.

  Kind regards

  JeromeFr

• Try to use the same pattern for more than two channels (CSR configuration) with usb 6000

  Hello

  I am currently trying to implement a LabView code to get readings of voltage using 5 different places at the same time. I want to only use the first location in the ground and get 4 measurements of voltage between the ground and each of the other 4 channels. I use a USB 6000 which, for now, allows me to use the same pattern for only two channels. Is it possible to use the same pattern for 4 channels?

  Thank you

  Maria

  The images do not explain everything. You must explain what are the sensors. I think you totally wrong on how they should be linked. CSR, all sensors must be a common understanding and the outputs not individual channels as I have already explained. If you are unable to do this, you should probably not use CSR and you have the wrong data acquisition device. If you want a side of a sensor as a reference, you need differential connections.