What should I wear to the front with ATT and Airport Extreme?

Similar Questions

• Should I wear to the front through a VPN

  I currently have a Cisco 1905 as my hub router, running v15.1 (4) M4. (192.168.1.0/24)

  This router has a static public IP address on interface GI0/0 and the internal address is enabled GI0/1 and we use NAT for Internet access.

  I have an ASA5505 (v8 (4)) Branch (192.168.12.0/24) connection to the router with EZVPN and the VPN is setup and works as it should.

  I can access the branch out of the hub and vice versa.

  I have a security camera in the branch that I can access through the VPN without problem.

  The problem occurs when I try to access the camera from the internet using port forwarding.

  We have several camera in the Office of hub that we access using via the following command port forwarding

  IP nat inside source static tcp 192.168.1.40 80 40001-stretch SDM_RMAP_1 route map

  It works 100%

  I tried to access the camera in the Office using the command

  IP nat inside source static tcp 192.168.12.40 80 41001-stretch SDM_RMAP_1 route map

  but I can't get through.

  I can see the NAT translation in the branch for the port 41001, but I'm not through.

  Is this possible? should I wear to the front in a VPN tunnel?

  The problems is that the branch office is an Office suite and we rent space. We are not provided a public ip address and I have no control over the router providing an address in the ASA5505.

  Any help would be appreciated thanks

  If you have crypto-cards running and you prefer split tunneling, then I suggest a completely different way to resolve that:

  You can install a small linux box (or Win2012R2 will also do the job) in the main exercise (better would an own DMZ for that) and set up as an agent reverse. This system takes requests and passes them to the cameras.

• Extension of WiFi using the Virgin Super Hub and Airport Extreme

  I am trying to expand the network so that I get better WiFi in another area of the House.  I have set up a unit of the Airport Extreme (AE) and through the Airport utility, I see that it is picking up the WiFi network and get the green light.  When I click on the device in Airport Utility (AU) to check the information of the AE is indicating that it is on the WiFi network and the right connection.   None of my devices (iPadAir 2 and iPhone 5) are picking up the WiFi Signal.  However, when I click on change EI is indicating a Base Station.  So clicking on wireless and network Mode, then click on extend a wireless network by clicking on update of the unit could not leave the stand mode.   Very strange!

  Routers Apple do not work as universal repeaters... they extend ONLY other airports.

  You can't do what you want. You MUST connect the extreme by ethernet on the Super Hub... or use adapters EOP.

• Cat left on Xbox 1 with Cox and Airport Extreme

  Hi all

  I can't use the group chat.  He said "the only way to get my router to work with Cox had to define the link local IPv6 and to have a self assigned IP."  My NAN is set to OPEN, so it's not the problem.  I get this error code:

  0 x 89231806

  Configuration of the network block you chat away

  I opened the recommended ports and still does not work.  My router is set to DHCP and NAT. Can someone please?  Beyond frustrated!  Does anyone else have this problem?

  Thank you

  Heather

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  • Announcement
    PLEASE READ. Introducing changes of case review & forum

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• Connection printer square with Hotspot and Airport Extreme

  Hello

  My family has a joint small pizza and I'm looking to switch our POS system instead. We do not have WiFi, so I was wondering if there is a work around to use the personal hotspot feature, set the AXE to "Join a wireless network" and then connect the printer to the back of the AXE to print receipts and also to use the cash register. This is the kit of POS of the place...

  https://squareup.com/shop/bar-restaurant-iPad-mini

  Maybe get WiFi would be the best solution, but I just wanted to see if this is possible. I have connected the AXE to the personal hotspot, but can not get the printer to be visible by the Setup program in the dashboard square app.

  Any suggestion is appreciated.

  Thank you!

  Your link does not work for me.

  You should be aware that Apple has removed 'join a wireless network' option... it no longer works in all utilities V6 later.

  Even if you use later hardware will not work...

  It works on older when equipment... It has an unpleasant effect...

  The airport becomes a silent client on the network... the ethernet ports have been disabled... the only access was wireless.

  I have connected the AXE to the personal hotspot, but can not get the printer to be visible by the Setup program in the dashboard square app.

  Nothing is plugged in by ethernet will work in this configuration. (USB might work if.)

  Apple authorizes the express be used as a wireless bridge. It is called client mode.

  AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network

  However, you can buy any other brand wireless bridge... There is no reason in this situation to buy apple products.

• What should I wear my PES with data to a new PC? [was: accounts]

  Wie kann ich mein PSE mit den Daten auf den neuen PC portieren?

  Accounts says:

  What should I wear my PES with data to a new PC?

  Microsoft® translator translator

  The only way you can do this by installing the ESP on your new machine using the DVD and the serial number you have purchased.  Once this is done, you might want to copy all photos from the old machine to a flash drive and then copy to flash drive in your pictures folder and let PSE concludes that they are and catalogues automatically.

  This method is ideal if your did not create catalog very sophisticated in your old machine, because you can also transfer the old catalog on your new PC so that you don't have to recreate the catalog from scratch.  If you want to transfer the catalog as well then on your old PC run PSE Organizer and go to:

  File > backup catalog

  It is also recorded on removable flash drive

  Now go to the new computer and launch Agenda and do almost the same thing except:

  File > restore catalog

  Now this almost should help you get started.

  Good luck.

• What should I write in the countries of the zone/download MediaGo region when my country is not listed

  I am from Pakistan. My country is not so what should I write in the country / area when I download sony vaio software for example media go? I just bought Sony Vaio model CXW 14125 EVS

  Hi imranqureshi,

  Why don't you try application Playmemories that comes with the new VAIO computer installed with Windows 8. It has almost the same features as Media Go.

  And your country, not in the list, I would say try selecting another country... U.S. / Canada will also...

  http://eSupport.Sony.com/docs/dvimag/PMH_Help_guide/en-us/index.html

  

• What should I do when the installation program stops at 39% and said "webget failed"?

  What should I do when the installation program stops at 39% and says "web get failed? I have a MacBook Pro.

  If you don't see that when downloading, either use another browser or use another (wired) connection and/or use a download manager.

• I want to host my site Web de Muse on Dreamhost.  When I publish it, what should I put in the field "Host Directory"?

  I want to host my site Web de Muse on Dreamhost.  When I publish it, what should I put in the field "Host Directory"?

  Hello

  Please see the following article, Point 2 and 3,

  Adobe help Muse | Download a Site from Muse Adobe on a third-party hosting service

• To get a trial free Adobe Photoshop Lightroom CC TRY (install) times the CC with Lightroom and Photoshop CC or just Lightroom CC?

  To get a trial free Adobe Photoshop Lightroom CC TRY (install) times the CC with Lightroom and Photoshop CC or just Lightroom CC? I installed only the Lightrrom CC and when I opened it up it reads 'Adobe Photoshop Lightroom CC' but I think I should TRY (install) the CC of Photoshop?

  OK, the plan of photography includes photoshop and photoshop lightroom.

• I can ONLY connect to the internet with IE7 and Outlook Express

  I have Win XP SP3, home wired network, Netgear router, cable internet, Lenovo desktop.
  I can run IE 7 and Outlook Express and connect to the internet very well with these.  However, I can not connect using FireFox.  Windows Update returns an error and does NOT connect to scan my computer and display the necessary updates.  I just installed tax program this year HR CD block and it is unable to connect to internet to download the updates.  I used IE7 to go to the web site of the tax program to download the update manually, but it doesn't connect either.  I also can't complete installation OF Adobe (Digital Editions) program because it must connect to the internet in order to make a registration.

  I have disabled the Windows Firewall, do not have a configured proxy.  So, I can browse the internet with IE7 and get email with Outlook express.  I went on the site from Google Chrome to try to download it and install it that (using IE7 of course), but after I press the "Download" button, IE7 says that it cannot connect to perform the download.

  I scanned this forum and not seen similar symptoms that would allow me to reach a solution.  Everyone knows about this issue and how to resolve?

  P.S. I have two other laptops Win XP which CAN completely connect to internet with IE and Firefox via the same router and the modem cable.

  I tried trojan remover and none of the things in the menu utils found any problems.

  But it turns out that my problem was a hidden/partial copy of Symantec Client Firewall that I thought was deleted.  Over the months some programs had been updated and Symantec didn't know about them, so it was blocking their access: FROM Adobe, HR Block, IE8, Firefox, etc.  Given that I have not seen it listed in the start menu and it was not listed in Add/Remove Programs, I didn't have to try to remove it.  And it was not poping up to tell me of a new program attempts to access the Internet.

  I used the Symantec tool to remove all THE stuff of Symantec and it cleared up my connection problems.  I then reinstalled Symantec Client Security (antivirus and firewall) and turned off the Windows Firewall.

• Hello friends, I have a license with terms of the photo with Photoshop and Lightroom applications installed on my iMac. Question: With this license can I install these applications also in my notebook? Using the same license.

  Hello friends, I have a license with terms of the photo with Photoshop and Lightroom applications installed on my iMac. Question: With this license can I install these applications also in my notebook? Using the same license.

  Yes, individual licenses, ranging up to allow two simultaneous, activations facilities.

  subscriptions allow mounting on an unlimited number of computers.  connection is limited to a maximum of two computers at a time.

• My site shows and works fine in Chrome and Firefox. It is exactly the opposite with Safari and Internet Explorer.

  In safari, the site takes as much time to load and once loaded, the police of the web that I used is replaced by a defect in safari, I guess. My video background takes a longer time to load once the site is loading. In internet explore, my site simply doesn't show as expected. I have 5 guides to navigation on the right side of the site, but about 11 are displayed. The artist's statement is not displayed in the bio section. Here's the url... leecatarts.businesscatalyst.com

  Please, any suggestions would be great!

  I think that you have solved the problem I checked the site with Safari and IE, but was not able to display the same behavior as mentioned. The site works very well.

  Thank you

  Sanjit

• Hi, how do I change the orientation of the page with headers and footers for facing pages

  Hello

  How to change the orientation of the page with headers and footers for facing pages in CS5

  Turning the page is only for the formatting of data - the page is not literally transformed for printing.

  In most print even if the pages of a book are enabled for the landscape, the header and the footer are still in the same position.

  If you need pages in landscape mode with headers and footers in a different location - you need to do these pages in the section "Master Pages" of the Pages panel

  Then apply these new Master Pages to the pages in your document.

  http://helpx.Adobe.com/InDesign/using/master-pages.html

  Note - it is not usual to have a different orientation for the headers and footers.

• Can I use old time capsule for storage only with a new airport extreme (standard want latest HQ)?

  I have a time Capsule elders (802.11n). I would like to know if I can still use this time Capsule only as a network storage device, if I decide to build my network with a new Airport Extreme (802.11ac). If I can do that, how would I set up the network to continue automatic backups with a router to update?

  To do what you want, the new AirPort Extreme 802.11ac would be installed as the "main" network router The time Capsule would be connected to the AirPort Extreme, using a wired Ethernet cable connection, and the time Capsule should be configured to run in bridge with the service Mode Wireless off.

  Any Mac you want to save in the time Capsule would need to have Time Machine preferences on each Mac adjusted to ensure that the time Capsule has been set as the target for backup.

  If you decide to add the AirPort Extreme, post back for more information at this time, if you need installation instructions step by step.