What software OR do I need for the following references
Here is the list of the references that I have to solve for c# (visual studio 2010) project
I installed the developer NI 2010 costume that does not solve all of the people, but the installation itself took hours, now I'm going to try the studio measure 2013 which resolve some, but who has the wrong file version, I bit some older version, but we'll see how it works.
I'm still in the middle of configuration 13, waiting the feb13 DVD driver to finish downloading...
So what exactly should I get these? Especially DAQmx
My predecessor has not left me notes on this topic notes in general, but that would be off topic...: manlol:
Thank you, in the meantime, I found the correct version.
I had to (find) and install the Developer costume 2012, it came with all the necessary libraries
Tags: NI Software
Similar Questions
-
How do I not what SATA driver do I need for the Satellite L300 - 03C
How do I not what SATA driver do I need for the Satellite L300 - 03C so I can make nlite
Hello
Your laptop seems to be a Satellite L300 - 03C PSLB8C-03C01X.
As already indicated on your first visit to thread the Toshiba Canada page and choose this model of laptop on the driver page.
http://209.167.114.38/support/download/ln_bymodel.aspThen download the Intel Matrix Storage Manager (SATA) - image of floppy drive. It of for Vista, but the files in this package should work with Win XP too.
Include these files using nLite to create the new disk Win XP that contains SATA drivers.Finally use this disk to start.
-
What type of memory I need for the Satellite A100-906
What types of memories takes charge of this laptop?
DDR2-533, 667 that's all? 800 media?The laptop came with RAM DDR2-533.
But you can check this with tools like Everest. There you can see what kind of RAM of the computer laptop (chip) is not supported.Of course, you can buy RAM DDR2-667 or DDR2-800 RAM, but it works only with the speed of the lowest module or chipset is not supported.
-
I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.
What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?
-
What USB 3.0 card is needed for the HP Pavilion 6370t?
What is needed for the HP Pavilion 6370 t USB 3.0 card?
Hi Fasteagle,
HP sells USB 3.0 PCI-E x 1 cards. I have one in my HP e9280t.
-
What is Adobe flash player needed for
What is Adobe flash player needed for
Hi Alison68,
Welcome to the responses of Microsoft Windows Vista forums.
Adobe Flash Player is a software for viewing animations and movies using computer programs such as a web browser; in common usage, Flash lets you put animation and movies on a web site. Flash Player runs SWF files that can be created by the Adobe Flash authoring tool, Adobe Flex or by a number of other Macromedia and third-party tools. The Flash Player has been designed to display 2D vector animation, but since become appropriate to create rich Internet applications and streaming video and audio. It uses vector graphics to minimize the file size and create files save bandwidth and loading time. Flash is a common format for games, animations, and GUIs embedded in web pages. Flash Player is available as a plugin for recent versions of browsers web (such as Mozilla Firefox, Opera, Safari and Internet Explorer) on selected platforms. Adobe States that each version of the plugin is backward compatible, with the exception of security changes introduced in Version 10.
If you need any other calrifications or if you feel that you still need more information, I would prefer that go you through the link below for the best answers.
http://forums.Adobe.com/community/FlashLet us know if you need additional assistance.
Kind regards.
Anthony
Microsoft technical support
Visit our Microsoft answers feedback Forum and let us know what you think. -
What developer support options are available for the development of Java for the BlackBerry Smartphone?
What plans are available?
Who can I contact with to register a support plan?
One of the evangelists 'Developer' RIM working outside South Africa, I think, so there should be someone local you can talk too. If you message Mark Sohm (the RIM name you will see a lot on the forum - MSohm), with your e-mail address and it ask to put you in contact with the Developer Evangelist in SA, which should help. You can tell Mark to ask me if he needs clarification. Do not promise anything either but I hope that something will happen.
-
DVD how much we need for the files backup with backup and restore program?
Hello how are you?
DVD how much we need for the files backup with backup and restore program? Y at - it large differences in the time and space between write backups on DVD and external hard drive?I do not understand your question. Asked how the space has been used on your C: drive and you answered 60 GB. Now you say your PARTITION C: is 60 GB with only 20 GB used? I really don't understand what you're so confused. It's simple arithmetic grade 3rd. What is space you USED on the C: drive, that multiply by 0.7 to obtain the amount of space will be used on your backup disk after compression. Divide this number by 4.7 and round. That's how many DVDs you'll need if you insist on the use of DVDs for backup. Then
(1) If you are using 60 GB, the answer is (60 x.7) / 4.7 = 8.936. I rounded up to 9 and added 1 just to be sure.
(2) If you use only 20 GB, the answer is (20 x.7) / 4.7 = 2.97 rounded up to 3. Add 1 and get 4.
If you use only 20 GB, I am very surprised, because almost any important installation of Windows 7 is going to take more than 20 GB.
All of this assumes that you do NOT use the Windows backup and restore program, but one that I recommended. When I used the windows one, the results were several times the space that I used on my C: partition.
Good luck.
-
I used jrockit but someone told me that it will be good to spend in JDK 1.7.0.28 because jrockit will be gone in the future.
WHAT java JDK hotspot I need for weblogic 10.3.6 SOA 11.1.1.7 and OSB 11.1.1.7?
and where can I download it?
Thank you
You should be fine with 1.7.65, but take a look in the matrix of certification to be sure...
http://www.Oracle.com/technetwork/middleware/downloads/FMW-11gr1certmatrix.xls
-
need drivers for the following!
need driver for the following equipment. in fact, it shows as unknown device in my Hp probook g1 450 4th generation i5.
ACPI\HPQ6007
* HPQ6007I would be happy if you please give me the link of the drivers.
You need HP 3D DriveGuard on your list of pilot. Choose which operating system you are running and you will pass to the right page:
-
replace my keyboard (ez4805US) and the need for the tech manual...
I need to replace my keyboard (ez4805US) and the need for the tech manual... where can I find a...
Welcome to the HP Forum!
docwho wrote:
I need to replace my keyboard (ez4805US) and the need for the tech manual... where can I find a...
If you really want the manual, I think that would help to identify your laptop with full p/n.
Identify the same way I did in my signature with the full p/n, alphanumeric included acharcters.
Kind regards
ERICO -
I paid for the following year of usig creative cloud, but the product is still in the expired State
Despite I see the transaction succeed in the properties of the product. I can't open Photoshop: it
say that I did not have a license. What I can do in such situation and how I can use Photoshop now?
[Duplicate message deleted... post the same question more than once is confusing... MOD]
[This is an open forum, not a direct line to Adobe support... you have to wait a response]
Back to the https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html of the trial
- and Troubleshooting FAQ https://forums.adobe.com/thread/1962238
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-If you have more than one email, but of course you use linked to your subscription
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html
-
have Adobe first CC I pay for it every month I just downloaded... What do I have to pay for the film Pat because all their transitions have black lines on it... Transitions in first CC are also like those on Adobe Premiere CS6 can get 1 transition and then take multiple options as only a transitional option when I take the transmission of action... for example break glass I can also do several different transitions with in the glass break action transition
Hi Willkutlass,
I'm sorry but don't know what 'pat film' is. If it is a 3rd party effect/transition, you may have to pay for it.
And the video transitions in Premiere Pro CS6 and first Pro CC are the same.
Only difference, several transitions in CS6.
Answer please, if you would like more information.
Thank you
Ilyes Singh
-
How to make a paper with some boxes to fill required for me to sign, and then some other boxes needed for the next person to sign. I want the boxes I've filled to be locked the next person.
Hi johanb64152807,
You can use eSign service, where you can send the document for signatures of several signatories, but the document will be sent to the following signatory after the earlier signed & it is not possible for him to make the changes.
Documents KB for help: -.
- Get started | Cloud of Document Adobe Tutorials
- Quick Installation Guide | Services Adobe eSign
- Send for electronic signature in eSign Adobe Document Cloud services | Adobe Acrobat DC tutorials
- Send agreements and collecting signatures. eSign services
- FREQUENTLY ASKED QUESTIONS | Services Adobe eSign
Kind regards
Nicos -
I can't get the file number I need for the license transfer process. Help, please.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Get help from cat with orders, refunds and exchanges (non - CC)
http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )
Maybe you are looking for
-
The button does not work everytime I try to put my phone on silent. I turn it down and it will automatically return to the sound, it activates again upward. What can I do?
-
Satellite A300 - failed to retrieve
Hej, Installed the new hard drive on my satellite a300. [When I run the product recovery cd, I have error -> cannot read header WIM][Error: 23]. F:\05425Xsp2.swm. [_wim_create_file: Fail read WIM header] 100% step [ERROR: 1812] C:\Program Systems\DVD
-
'Page' does not name a type with the given Code problem
Hello I try the code on this page , but I'm getting 'Page' does not designate a type in the Test.hpp file with the following line private: Page * appPage; Container * mRootContainer; }; What could be the solution for this problem?
-
HP Officejet 6310 All in One – "cartridge error - remove and re-insert cartridge on the left.
HP Officejet 6310 All in One "cartridge error - remove and reinsert cartridge on the left." Help! With this error message, it is not allowing me to print at all. I did the steps to clean the cartridge and carriage of the printer inside, twice with
-
Cannot install the update 80070103 error code
Cannot install updates error code 80070103